Asynchronous SOAP over JMS

Similar Questions

• Setup SOAP over JMS

  Hi all
  I am currently studying up on top of network transport protocols and came across SOAP over jms. I've been reading through the theoretical articles, but can't seem to be able to build an application. Could someone tell me how it's done, or direct me to network resources? I would be really grateful for any help.

  Sorry, my 'Watch' went. Don't know what I did wrong...

  I watched you Web Service JMS via Oracle Web Logic Server settings? Maybe that will get you what you need?
  http://download.Oracle.com/docs/CD/B32110_01/Web.1013/b28975/transportjms.htm
  -Ed

• Who's the best SOAP or JMS?

  Hi all
  
  can anyone suggest what is the best, SOAP or JMS to connect n/b bpel and esb both installed in different servers and why?
  
  Thanks in advance...

  Hi Spengler,

  BPEL/ESB share layer Java/WSIF to this invocation on the same global transaction.
  I'd go for JMS via SOAP protocol, as SOAP calls are expensive. SOAP over JMS or SOAP over HTTP can be tested in your environment for optimal performance, and then choose one of them.
  For Web services, I would choose to SOAP over HTTP. For Java environments, could exceed for the JMS SOAP.
  Hope that helps!

  See you soon
  Rémy Pucha

• Why we use JMS instead of using HTTP/SOAP WebService

  Hello

  Why we use JMS/SOAP instead of using HTTP/SOAP HTTP being more good on the Protocol TCP/IP (why seller enjoy JMS)

  Why we use JMS rather than to use the direct database because the database JMS use internally to store its payload.

  I've read these post

  < http://Java.dzone.com/articles/performance-soaphttp-vs-soapjm > and

  < http://it.Toolbox.com/blogs/the-SOA-blog/Web-Services-http-vs-JMS-19110 >

  But in reality most of the things we can achieve in the two example

  Consider using SOAP http:
  
  • Externally facing web services (for example, customers or suppliers) ( ) in JMS also is good, that we can do )
  • For simple point-to-point and services stateless ( ) we have point to point in JMS queues using )
  • Where you need a thin client with no installation of MOM
  
  

  Consider using SOAP over JMS for:
  
  • High-volume distributed messaging ( ) Why for high volume JMS is required for HTTP based Web Service ? )
  
  • Asynchronous messaging (based HTTP web service can also be asynchronous and we can use the correlation machining inside()

  • Where a transaction limit is necessary in the middleware (which is operation limit, it is not possible with the basic HTTP web service ? ) )

  
  • Where the message consumers are slower than the producers (the location of that point in difference( )
  • Guarantee deliver ()that we can achieve in web service basic HTTP using the WS-Reliable messaging standard so how this point said difference( )

  • A one-time delivery of messages (what back "only once, sending a message" threat and is not possible with the web service HTTP based ? ) )

  
  • Publish/subscribe ( ) this mechanism broad casting can be done using HTTP based web service also if all applicant read only the recording of database ) (Same JMS use the internal database)

  
  • Distributed systems of peers who can sometimes be disconnected ( ) This also good for basic HTTP web service, we can use correlation sets (asynchronous service) then even if the following resource is not in service expect that it will be available and continue run more. so, how that pint is indicative of difference )

  
  

  Someone tell me really what is the real benefits or difference and why and where we use JMS Web service instead of HTTP based Web (real difference) service base

  
  

  
  

  Thank you

  Hello

  It is difficult to understand your point with this discussion... I don't see what exactly you're trying to lawyer he y... You can obviously use a table knife to unscrew a screw, it will probably work for 90% of cases... But you do not use the right tool for the job, and it can potentially become very difficult... You can even cut a finger and wish you had used the tool that was actually designed to work you have to do... What you're trying to find that it is the best tool for your use case, the options are endless...

  See you soon,.

  Vlad

• SOAP WITH UTL_HTTP ON HTTPS WEB SERVICE

  Hi all! I'm new there and experimenting with the consumption of web services from database.

  I'm trying to consume a service soap (simple) utl_http via https web with no luck in the Oracle 11 g Release 11.2.0.1.0 - 64 bit Production database.

  When you try to consume a web service soap utl_http over http, I have a great solution. But things goes bad when change the http secure (https) Protocol.

  There are a lot of examples and articles out there on how to do it, but there is nothing, not an integrated solution explained step by step.

  I would like to write the steps that I followed then maybe someone will find what am I missing or what I'm doing wrong.

  1 grant the user permissions of utl_Http.

  2 Confure ACL with

  BEGIN

  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL (LCD = > 'utl_http.xml',)

  Home = > 'oracle-www.m-base.org/Sounds.html');

  END;

  /

  COMMIT;

  and check the ACL with

  SELECT *.

  Of user_network_acl_privileges;

  and

  SELECT *.

  OF dba_network_acls;

  3 export certifications of sites web service and import them into the portfolio (https://oracle-base.com/articles/misc/utl_http-and-ssl). Try a to time with different types of key - extensions (with key chains or not)

  4. When you try to consume the service web soap over HTTPS with SOAP UI everything works fine, but I get with utl_http

  ORA-28857: unknown error SSL

  I think keystore loaded successfully, but there is one thing missing in my puzzle. Also, I find this portfolio when run SELECT * FROM v$ encryption_wallet has a closed state.

  WRL_TYPE WRL_PARAMETER STATE

  file

  E:\oracle\admin\HOSPITAL\Wallet

  CLOSED

  The web service is trying to run is a simple add you can fid it https://oracle-base.com/webservices/server.php/ws_add

  Please help me to find out what am I do wrong.

  Thank you in advance.

  Working on my db...

  Then try to patch your database...

  

• Problem when setting the option of delay in delivery on JMS

  Hi, I am trying to set the option of delay in delivery over JMS, but it does not work. For this I used the following code:
  
  Private Sub queuing (message from InterfaceMessage, int priority, Boolean isLog) {}
  QueueConnection queueConnection = null;
  WLQueueSession wlQueueSession = null;
  WLMessageProducer wlMessageProducer = null;
  ObjectMessage, objectMessage = null;
  delay = 5000;
  try int = 5;
  try {}
  queueConnection = connectionFactory.createConnection () (QueueConnection);
  wlQueueSession = (WLQueueSession) queueConnection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
  
  Logger.info ("\tMessageManager.queuing--> FRONT RedeliveryDelay: {} - delay: {}", wlQueueSession.getRedeliveryDelay (), delay); * //Here the newspaper prints 0 - 5000 *.
  wlQueueSession.setRedeliveryDelay (delay);
  Logger.info ("\tMessageManager.queuing--> AFTER RedeliveryDelay: {} - delay: {}", wlQueueSession.getRedeliveryDelay (), delay); * //But here, the newspaper prints still 0 - 5000, instead of 5000-5000 then why is the value set is not respected? *
  
  wlMessageProducer = wlQueueSession.createProducer (interfaceEXPRESSMessage) (WLMessageProducer);
  wlMessageProducer.setRedeliveryLimit (attempts);
  objectMessage = wlQueueSession.createObjectMessage (message);
  wlMessageProducer.send (objectMessage);
  } catch (Exception exception) {}
  Logger.Error ("MessageManager.queuing-> Exception - msg: {}", objectMessage, exception);
  } {Finally
  try {}
  wlMessageProducer.close ();
  wlQueueSession.close ();
  queueConnection.close ();
  } catch (Exception exception) {}
  Logger.Error ("MessageManager.queuing-> Exception - msg: {}", objectMessage, exception);
  }
  }
  }
  
  Could someone advise on how to fix this?
  
  Thanks in advance!
  
  Published by: cbustamante on April 29, 2011 10:54

  Configuration of the period of delivery and return limit can also be set programmatically (using WLST script or java mbeans), so if these settings change infrequently – say once a day – then mbeans could be a good approach...

  Can you explain more about what you are looking for? Your original question was late redelivery, no delivery deadline. It looks like delivery limits can be set for producers - as directed by the javadoc I mentioned above, and delays can be set on the sessions of consumers (no effect on the producers from the same session).

  An MDB does not provide users with access to the session of the container used to create internal consumption.

  Tom

• Proxy sends the AUTHORITY rather than SOAP

  I'm trying to implement the SOAP over SSL communication between an AIR application and a remote server by using basic HTTP authentication. I realized that this is possible to do it via the Web service proxy. I was unable, however, to convince the proxy to talk SOAP, and AUTHORITY. Documentation on the services-config settings. XML has been a bit light and so it's hard to say how the problem can be solved. I compiled the code with Flex 3 Beta 3 and Flex 3.0.0 with the same results.
  
  After the instantiation of a WebService and configure it to use the proxy (useProxy = true), loadWSDL() causes an AMF message to send to the SOAP server as a kind of a ping. The SOAP server, of course, impossible to analyze it and returns a SOAP fault. WebService, expected AMF in response pours and produces an error, without loading the WSDL file.
  
  Here is the code used to load the WSDL file.
  
  var ws:WebService =
  new WebService ('destination.cpiapi.https',
  "https://192.168.1.123:8080/api/cpiapi.php");
  ws.useProxy = true;
  ws.loadWSDL ();
  
  Here are my services - config.Xml. I'm guessing that there is a problem of configuration somewhere here tells the proxy to talk about the AUTHORITY instead of SOAP. Note that there are references of passage to HTTP and HTTPS in this listing... using SSL was not a problem, so I went to HTTP, so I could sniff the messages without changing my BOM. Ignore this.
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = "service.cpiapi service"
  Class = "Flex.Messaging.services.http.SOAPProxyAdapter"
  messageTypes = "flex.messaging.messages.HTTPMessage, flex.messaging.messages.SOAPMessage" > "
  < id = "destination.cpiapi.https destination" >
  <>channels
  < ref = "channel.https" / channel >
  < / channels >
  Properties of <>
  < wsdl > http://192.168.1.123:8080 / cpiapi.wsdl < /wsdl & gt;
  < SOAP > http://1921.68.1.123:8080/api/cpiapi.php < /soap & gt;
  < / properties >
  < security >
  < ref = "security.authBasic security-constraint" / > "
  < / security >
  < / destination >
  < / service >
  < / services >
  <>channels
  < id = 'channel-definition channel.https'
  Class = "MX. Messaging.Channels.HTTPChannel">
  < endpoint
  "URI =' http://192.168.1.123:8080/api/cpiapi.php '
  Class = "Flex.Messaging.Endpoints.HTTPEndpoint"
  / >
  < / channel-definition >
  < / channels >
  < security >
  < id = "security.authBasic security-constraint" >
  Basic < auth-method > < / auth-method >
  < / security constraint >
  < / security >
  < / services-config >
  
  
  After compiling (SEO services-config. ("XML with the amxmlc flag '-services = services - config.xml") and the execution of the code, call loadWSDL() causes the following message to send to the endpointURI.
  
  
  [HTTP Headers deleted]
  
  "< amfx worm = '3' xmlns =" http://www.macromedia.com/2005/amfx "> "
  < body >
  < object type = "flex.messaging.messages.CommandMessage" >
  features of <>
  body < String > < / string >
  clientId < string > < / string >
  correlationId < string > < / string >
  destination < string > < / string >
  headers < string > < / string >
  messageId < string > < / string >
  operation of < String > < / string >
  < string > timestamp < / string >
  timeToLive < string > < / string >
  < / characters >
  [ ... ]
  < body / > < / amfx >
  
  As expected, the server responds with an error code SOAP and an exception is thrown when an attempt is made to decode the fault as the authority for the financial markets.
  
  
  [MessagingError message = 'invalid AMFX package. [Content must begin with a < amfx > node ']
  at mx.messaging.channels.amfx::AMFXDecoder$/decodePacket() [E:\dev\flex_3_beta3\sdk\framework s\projects\rpc\src\mx\messaging\channels\amfx\AMFXDecoder.as:155]
  at mx.messaging.channels.amfx::AMFXDecoder/decode() [E:\dev\flex_3_beta3\sdk\frameworks\proje cts\rpc\src\mx\messaging\channels\amfx\AMFXDecoder.as:97]
  at mx.messaging.channels::HTTPChannel/decodePacket() [E:\dev\flex_3_beta3\sdk\frameworks\proj ects\rpc\src\mx\messaging\channels\HTTPChannel.as:545]
  at mx.messaging.channels::HTTPChannel/pingCompleteHandler() [E:\dev\flex_3_beta3\sdk\framewor ks\projects\rpc\src\mx\messaging\channels\HTTPChannel.as:557]
  to ChannelRequestLoader / callEventCallback () [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\ src\mx\messaging\channels\HTTPChannel.as:1164]
  to ChannelRequestLoader / completeHandler ([E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\sr c\mx\messaging\channels\HTTPChannel.as:1200])
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/onComplete()
  
  
  
  
  So, my question is, why the proxy talking AMF? When I set useProxy = false, no the AMF message is sent, and SOAP communication goes very well until I have ever setCredentials(user,pass) on the WebService (whith throws a fault, saying me that I need useProxy). Y at - it a config within the services-config. XML which tell HTTPChannel not to send a ping from the AMF?
  

  Thanks for the reply. I thought incorrectly that the proxy was an integrated/transparent entity in the AIR motor. I put endpoint URI must be the webservice, not the URI of a sort of proxy of the AMF.

  My original goal was to be able to define authentication HTTP headers, as in "Authentication: Basic...". I'd be a bad engineer if I set up a proxy just so that I could use AbstractWebService.set [Remote] Credentials (). My first attempt to do not use a proxy has been to:

  var ws:WebService = new WebService();
  ws.useProxy = false;
  WS.wsdl = «...» » ;
  ws.endpointURI = «...» » ;
  var header: URLRequestHeader =
  New URLRequestHeader ("authentication", "Basic...");
  ws.httpHeaders = header;

  However, the header was ignored. The documentation available for me is not a lot to tell me that if httpHeaders:Object wanted a URLRequestHeader or only a string or only an object of the name pair: value... None of them seem to make a difference. Is the httpHeaders parameter used only in the useProxy = true parameter?

  Thanks again for the help. Any help most to push me in the right direction toward making communication HTTP authenticated SOAP would be greatly appreciated.

• How to access Web Services?

  Are there APIs to access existing exposed web services?

  I services published with their WSDL files and I need to access with SOAP over HTTP.

  How do you take in blackberry? Any API or do use you some kind of libraries third thrid?

  JSR 172 is supported.

  Download the Sun web services tool to generate stubs from the WSDL.

  You searched the Forum? There is a lot of discussion on this topic.

• Namespace in the message of reply in PeopleSoft

  Hi all

  I use SOAP over http for integration with 3rd party system. We generate the WSDL and it made available to them.

  They are facing a problem with namespace in the response message because it is different with what is defined in the WSDL file (it is coming as http://peoplesoft.com/ < Service operation > response. )

  
  

  The namespace in the request message is correctly picking up the target namespace defined in the Service. Can you please thanks to some tips?

  What are the Tools version are you on? It is a known problem.

  Reference:

  E - IB: Service Response Message Namespace does not match the Description in WSDL (Doc ID 1147654.1)

  There are few workarounds:

  (1) changing the WSDL file.

  (2) using a basic part container set of lines of the message.

  (3) add a transformation on the message of response using XSLT.

  In the past, I used container based part of lines messages to work around this problem. I don't think that it is always a question in the latest version of the tools.

• Oracle Service Bus

  Hello
  
  I understand the concept of the use of the OSB.
  
  1. I have the web service that is simple and has been deployed to the WL and tested in the EA.
  2. I installed OSB and create 3 directories and import my webservice.
  3. I tested the OSB instance through the console of the OSB, and it works.
  
  The question:
  1. how I'm calling or connection between the different applications of OSB?
  
  2. If the connection to the OSB made by Webservice call with parameters (SOAP over HTTP), if yes, what is the difference between OSB and Webservice in WebLogic which exposing Web services?
  
  
  I need to understand, in general, how the connection is made to the proxy of the OSB.
  
  Thank you

  Hello

  There are two ways to obtain the wsdl of a proxy service...

  Go to sb console on Project Explorer and find your Proxy service it... In the Actions column, there is an icon for you allows you to export the wsdl file...

  Another way is to go the the details of the configuration of your Proxy service and get the uri of the endpoint... The wsdl is accessible from a browser with a url of type...
  http://hostname:7001 / your proxy endpoint uri? WSDL

  I hope this helps...

  See you soon,.
  Vlad

• How to move one Web Service to another machine.

  I was reading a book on SOA. In describing the concept of coupling low he said
  
  Web services, however, are "loosely coupled." A piece of software that have already
  exposed as a web service, it is relatively simple to move it to another computer. Why
  is it? It is simple Web services "non-couple" and "decouple" because these services
  Summary of the functionality of the software interface. Once software is
  available as a web service, it is available through SOAP in a variety of ways, including
  Protocols of the Internet.
  
  can someone explain this?

  When you have a web service that is consumed by SOAP over HTTP protocol, of course it would be to have a WSDL that are associated with. So all consumers are interested is the WSDL and the interface provided by the service. So, here in this example, for the new service what service replaced mainframe, also a long time that its end URI and the interface of the service are maintained, consumers is unclear, because the new service also provides the same functionality can be and also for sure the same interface defined as one.

  Hope this helps,
  N

• HTTPS connection to the server with the host name which has its IP address

  Hi all
  
  I work in a development of the solution where a server application is running in a machine and hosts of Application Service SOAP over HTTPS. The server has the certificates for its IP address. My client application tries to use the SOAP Service; but when I connect to the Application Server using the HOST name in the URL, I get the SSLException indicating that the HOST name does not match name the object.
  
  If I use the IP address in the URL, it works well - but I do not like the server application can move to different IP dynamiccaly - if you are using DNS is our solution to hide this complexcity from client applications.
  
  Help, please.
  
  Kind regards
  Kaja

  the HOST name does not match name the object.

  The host name does not have the name of the topic in the server certificate. He agrees with host.domain name.

• The OPM with Flex Integratio

  How can I integrate my policy of oracle modeling project or rules with Flex Application.We r, trying to make the same type of project which was given under the example of the OPM (social services), but in Adobe Flex.
  Until now I have written rules in the modelling of policies of oracle, and then through the policy modellinhg that only I generated web services and try to call flex.
  But I'm still not clear with how this can be achieved, which can be useful for me for flex response to oracle rule engine.
  Can you explain the process step by step nd guide me for this project.
  
  My approach is correct?
  
  It would be very useful if you clear my doubts about the integration of the OPM with Flex.

  There are two ways to access the engine.

  The first way accesses the engine through the Java or .NET API. To make the Flex will be able to make direct calls to Java or .NET.

  The second way is through the determinations Server Web Service. Determinations server is specifically designed to provide a large grain end access to the engine rules, through XML/SOAP over HTTP. Assessment service is a way without decision-making status (namely:-data in--> answer to). Maintenance service provides a way to create a more dynamic experience (IE, create a session, add/modify the data, get the screens to answer questions)

  Flex can call Java or .NET API directly then, you can use the API to the engine if you need to run the server of determinations as a remote web application and access, the engine using the service to assess or maintenance.

  Looks like Flex certainly has support for calling web services, which suggests that the approach of Determiantions server would work. A quick google for Flex, Java and .NET looks like access to Java and .NET is always done through web services.

• API vs determinations Server

  Hello
  
  Is there a directive / better documentation practice that defines when to use APIs and when to use the server of determinations.
  
  We expect to create .NET applications on top of the OPA of modules. Please provide your suggestions on the appropriateness of using the API or the server of determination.
  
  Thanks in advance,
  Aditya

  Hi Aditya,

  The best simple explanation comes from our Oracle policy Automation Developer Help

  >
  * If you want to create a Web application determinations based on the web you should consider using Oracle Web determinations.

  * If you have a single application that integrates rules into a new or existing application, or you want to use an application written in Java or c#, you should consider using the API directly determinations.

  * If you want to manage from a central location determinations and use them as a service in a distributed application, or applications, you should consider the use of the determinations Oracle server.
  >

  If you are looking to write a .NET application, then you're probably not interested by determinations of Web.

  Essentially the determinations using the API are very fast and very easy to integrate into a .NET application, however, the engine API cannot be used locally and so it cannot be managed from a central location.

  The determinations Server uses SOAP over HTTP/HTTPS calls and so there is a little more mucking around with XML. However, it has the advantage of the solution can be managed centrally and can easily pass through a network satisfy any level of demand.

• Cost of the deployment of Flex 2.0 applications

  Don't get me wrong, I think that Flex 2.0 is about the most amazing app to date development tool and I am very eager to build and deploy applications with it. My question revolves around the cost to do so.
  
  I'm working on a range of internet and intranet applicationsin CF and I'd love to put Flex on the front-end server. My concern is intranet applications. It is largely small office apps and the cost for MySQL, and ColdFusion purchase costs more than I'd be able to market the application for. Remote access work with the CF developer edition? Adobe allows even commercial applications to run on the developers version?
  
  Basically, I can't get around to buy MySQL and this cost will work, but if I have to buy a Standard Version of the CF for more each application I sell, is not worth it.
  
  What are my options? http services? Adobe offers it's slower. Is - this noticeable? Slow died in any web application or not.

  We can say that the web services are custom HTTP services. Web services add the SOAP over HTTP protocol, so you can have organized functions, arguments, values, etc.

  I'm sure that it is not the costs associated with the Java, Apache or PHP. They've all got free and open licenses. Either way, Apache is the Web server. You can implement your solution in PHP or Java (JSP) and it would be hosted by Apache (as I know). These days, PHP is the most popular because it is open source and relatively simple to use (and I believe taken supported by Apache out of the box). There are probably all of the best free solutions.