Setup SOAP over JMS

Similar Questions

• Asynchronous SOAP over JMS

  It is possible to expose a 'Process of Notification' operation type uses SOAP over JMS? When you select the option of Web Service of process on the process it only allows to define SOAP over HTTP web services. It is possible to call one-way SOAP over JMS Web services, but I can't find a way to expose a BPM process (or the process of notification) as a SOAP one-way on JMS web service.
  
  Thanks in advance

  There is not a way to use JMS instead of HTTP to expose process notifications. You would need to create a JMS listener, parse the soap message and then inform the instance (using correlations probably) within the overall.

  Create JMS headphones is not hard to do. Let me know if you need some help with that.

  HTH,
  Mark

• Who's the best SOAP or JMS?

  Hi all
  
  can anyone suggest what is the best, SOAP or JMS to connect n/b bpel and esb both installed in different servers and why?
  
  Thanks in advance...

  Hi Spengler,

  BPEL/ESB share layer Java/WSIF to this invocation on the same global transaction.
  I'd go for JMS via SOAP protocol, as SOAP calls are expensive. SOAP over JMS or SOAP over HTTP can be tested in your environment for optimal performance, and then choose one of them.
  For Web services, I would choose to SOAP over HTTP. For Java environments, could exceed for the JMS SOAP.
  Hope that helps!

  See you soon
  Rémy Pucha

• Why we use JMS instead of using HTTP/SOAP WebService

  Hello

  Why we use JMS/SOAP instead of using HTTP/SOAP HTTP being more good on the Protocol TCP/IP (why seller enjoy JMS)

  Why we use JMS rather than to use the direct database because the database JMS use internally to store its payload.

  I've read these post

  < http://Java.dzone.com/articles/performance-soaphttp-vs-soapjm > and

  < http://it.Toolbox.com/blogs/the-SOA-blog/Web-Services-http-vs-JMS-19110 >

  But in reality most of the things we can achieve in the two example

  Consider using SOAP http:
  
  • Externally facing web services (for example, customers or suppliers) ( ) in JMS also is good, that we can do )
  • For simple point-to-point and services stateless ( ) we have point to point in JMS queues using )
  • Where you need a thin client with no installation of MOM
  
  

  Consider using SOAP over JMS for:
  
  • High-volume distributed messaging ( ) Why for high volume JMS is required for HTTP based Web Service ? )
  
  • Asynchronous messaging (based HTTP web service can also be asynchronous and we can use the correlation machining inside()

  • Where a transaction limit is necessary in the middleware (which is operation limit, it is not possible with the basic HTTP web service ? ) )

  
  • Where the message consumers are slower than the producers (the location of that point in difference( )
  • Guarantee deliver ()that we can achieve in web service basic HTTP using the WS-Reliable messaging standard so how this point said difference( )

  • A one-time delivery of messages (what back "only once, sending a message" threat and is not possible with the web service HTTP based ? ) )

  
  • Publish/subscribe ( ) this mechanism broad casting can be done using HTTP based web service also if all applicant read only the recording of database ) (Same JMS use the internal database)

  
  • Distributed systems of peers who can sometimes be disconnected ( ) This also good for basic HTTP web service, we can use correlation sets (asynchronous service) then even if the following resource is not in service expect that it will be available and continue run more. so, how that pint is indicative of difference )

  
  

  Someone tell me really what is the real benefits or difference and why and where we use JMS Web service instead of HTTP based Web (real difference) service base

  
  

  
  

  Thank you

  Hello

  It is difficult to understand your point with this discussion... I don't see what exactly you're trying to lawyer he y... You can obviously use a table knife to unscrew a screw, it will probably work for 90% of cases... But you do not use the right tool for the job, and it can potentially become very difficult... You can even cut a finger and wish you had used the tool that was actually designed to work you have to do... What you're trying to find that it is the best tool for your use case, the options are endless...

  See you soon,.

  Vlad

• SOAP WITH UTL_HTTP ON HTTPS WEB SERVICE

  Hi all! I'm new there and experimenting with the consumption of web services from database.

  I'm trying to consume a service soap (simple) utl_http via https web with no luck in the Oracle 11 g Release 11.2.0.1.0 - 64 bit Production database.

  When you try to consume a web service soap utl_http over http, I have a great solution. But things goes bad when change the http secure (https) Protocol.

  There are a lot of examples and articles out there on how to do it, but there is nothing, not an integrated solution explained step by step.

  I would like to write the steps that I followed then maybe someone will find what am I missing or what I'm doing wrong.

  1 grant the user permissions of utl_Http.

  2 Confure ACL with

  BEGIN

  DBMS_NETWORK_ACL_ADMIN. ASSIGN_ACL (LCD = > 'utl_http.xml',)

  Home = > 'oracle-www.m-base.org/Sounds.html');

  END;

  /

  COMMIT;

  and check the ACL with

  SELECT *.

  Of user_network_acl_privileges;

  and

  SELECT *.

  OF dba_network_acls;

  3 export certifications of sites web service and import them into the portfolio (https://oracle-base.com/articles/misc/utl_http-and-ssl). Try a to time with different types of key - extensions (with key chains or not)

  4. When you try to consume the service web soap over HTTPS with SOAP UI everything works fine, but I get with utl_http

  ORA-28857: unknown error SSL

  I think keystore loaded successfully, but there is one thing missing in my puzzle. Also, I find this portfolio when run SELECT * FROM v$ encryption_wallet has a closed state.

  WRL_TYPE WRL_PARAMETER STATE

  file

  E:\oracle\admin\HOSPITAL\Wallet

  CLOSED

  The web service is trying to run is a simple add you can fid it https://oracle-base.com/webservices/server.php/ws_add

  Please help me to find out what am I do wrong.

  Thank you in advance.

  Working on my db...

  Then try to patch your database...

  

• Problem when setting the option of delay in delivery on JMS

  Hi, I am trying to set the option of delay in delivery over JMS, but it does not work. For this I used the following code:
  
  Private Sub queuing (message from InterfaceMessage, int priority, Boolean isLog) {}
  QueueConnection queueConnection = null;
  WLQueueSession wlQueueSession = null;
  WLMessageProducer wlMessageProducer = null;
  ObjectMessage, objectMessage = null;
  delay = 5000;
  try int = 5;
  try {}
  queueConnection = connectionFactory.createConnection () (QueueConnection);
  wlQueueSession = (WLQueueSession) queueConnection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
  
  Logger.info ("\tMessageManager.queuing--> FRONT RedeliveryDelay: {} - delay: {}", wlQueueSession.getRedeliveryDelay (), delay); * //Here the newspaper prints 0 - 5000 *.
  wlQueueSession.setRedeliveryDelay (delay);
  Logger.info ("\tMessageManager.queuing--> AFTER RedeliveryDelay: {} - delay: {}", wlQueueSession.getRedeliveryDelay (), delay); * //But here, the newspaper prints still 0 - 5000, instead of 5000-5000 then why is the value set is not respected? *
  
  wlMessageProducer = wlQueueSession.createProducer (interfaceEXPRESSMessage) (WLMessageProducer);
  wlMessageProducer.setRedeliveryLimit (attempts);
  objectMessage = wlQueueSession.createObjectMessage (message);
  wlMessageProducer.send (objectMessage);
  } catch (Exception exception) {}
  Logger.Error ("MessageManager.queuing-> Exception - msg: {}", objectMessage, exception);
  } {Finally
  try {}
  wlMessageProducer.close ();
  wlQueueSession.close ();
  queueConnection.close ();
  } catch (Exception exception) {}
  Logger.Error ("MessageManager.queuing-> Exception - msg: {}", objectMessage, exception);
  }
  }
  }
  
  Could someone advise on how to fix this?
  
  Thanks in advance!
  
  Published by: cbustamante on April 29, 2011 10:54

  Configuration of the period of delivery and return limit can also be set programmatically (using WLST script or java mbeans), so if these settings change infrequently – say once a day – then mbeans could be a good approach...

  Can you explain more about what you are looking for? Your original question was late redelivery, no delivery deadline. It looks like delivery limits can be set for producers - as directed by the javadoc I mentioned above, and delays can be set on the sessions of consumers (no effect on the producers from the same session).

  An MDB does not provide users with access to the session of the container used to create internal consumption.

  Tom

• Proxy sends the AUTHORITY rather than SOAP

  I'm trying to implement the SOAP over SSL communication between an AIR application and a remote server by using basic HTTP authentication. I realized that this is possible to do it via the Web service proxy. I was unable, however, to convince the proxy to talk SOAP, and AUTHORITY. Documentation on the services-config settings. XML has been a bit light and so it's hard to say how the problem can be solved. I compiled the code with Flex 3 Beta 3 and Flex 3.0.0 with the same results.
  
  After the instantiation of a WebService and configure it to use the proxy (useProxy = true), loadWSDL() causes an AMF message to send to the SOAP server as a kind of a ping. The SOAP server, of course, impossible to analyze it and returns a SOAP fault. WebService, expected AMF in response pours and produces an error, without loading the WSDL file.
  
  Here is the code used to load the WSDL file.
  
  var ws:WebService =
  new WebService ('destination.cpiapi.https',
  "https://192.168.1.123:8080/api/cpiapi.php");
  ws.useProxy = true;
  ws.loadWSDL ();
  
  Here are my services - config.Xml. I'm guessing that there is a problem of configuration somewhere here tells the proxy to talk about the AUTHORITY instead of SOAP. Note that there are references of passage to HTTP and HTTPS in this listing... using SSL was not a problem, so I went to HTTP, so I could sniff the messages without changing my BOM. Ignore this.
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = "service.cpiapi service"
  Class = "Flex.Messaging.services.http.SOAPProxyAdapter"
  messageTypes = "flex.messaging.messages.HTTPMessage, flex.messaging.messages.SOAPMessage" > "
  < id = "destination.cpiapi.https destination" >
  <>channels
  < ref = "channel.https" / channel >
  < / channels >
  Properties of <>
  < wsdl > http://192.168.1.123:8080 / cpiapi.wsdl < /wsdl & gt;
  < SOAP > http://1921.68.1.123:8080/api/cpiapi.php < /soap & gt;
  < / properties >
  < security >
  < ref = "security.authBasic security-constraint" / > "
  < / security >
  < / destination >
  < / service >
  < / services >
  <>channels
  < id = 'channel-definition channel.https'
  Class = "MX. Messaging.Channels.HTTPChannel">
  < endpoint
  "URI =' http://192.168.1.123:8080/api/cpiapi.php '
  Class = "Flex.Messaging.Endpoints.HTTPEndpoint"
  / >
  < / channel-definition >
  < / channels >
  < security >
  < id = "security.authBasic security-constraint" >
  Basic < auth-method > < / auth-method >
  < / security constraint >
  < / security >
  < / services-config >
  
  
  After compiling (SEO services-config. ("XML with the amxmlc flag '-services = services - config.xml") and the execution of the code, call loadWSDL() causes the following message to send to the endpointURI.
  
  
  [HTTP Headers deleted]
  
  "< amfx worm = '3' xmlns =" http://www.macromedia.com/2005/amfx "> "
  < body >
  < object type = "flex.messaging.messages.CommandMessage" >
  features of <>
  body < String > < / string >
  clientId < string > < / string >
  correlationId < string > < / string >
  destination < string > < / string >
  headers < string > < / string >
  messageId < string > < / string >
  operation of < String > < / string >
  < string > timestamp < / string >
  timeToLive < string > < / string >
  < / characters >
  [ ... ]
  < body / > < / amfx >
  
  As expected, the server responds with an error code SOAP and an exception is thrown when an attempt is made to decode the fault as the authority for the financial markets.
  
  
  [MessagingError message = 'invalid AMFX package. [Content must begin with a < amfx > node ']
  at mx.messaging.channels.amfx::AMFXDecoder$/decodePacket() [E:\dev\flex_3_beta3\sdk\framework s\projects\rpc\src\mx\messaging\channels\amfx\AMFXDecoder.as:155]
  at mx.messaging.channels.amfx::AMFXDecoder/decode() [E:\dev\flex_3_beta3\sdk\frameworks\proje cts\rpc\src\mx\messaging\channels\amfx\AMFXDecoder.as:97]
  at mx.messaging.channels::HTTPChannel/decodePacket() [E:\dev\flex_3_beta3\sdk\frameworks\proj ects\rpc\src\mx\messaging\channels\HTTPChannel.as:545]
  at mx.messaging.channels::HTTPChannel/pingCompleteHandler() [E:\dev\flex_3_beta3\sdk\framewor ks\projects\rpc\src\mx\messaging\channels\HTTPChannel.as:557]
  to ChannelRequestLoader / callEventCallback () [E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\ src\mx\messaging\channels\HTTPChannel.as:1164]
  to ChannelRequestLoader / completeHandler ([E:\dev\flex_3_beta3\sdk\frameworks\projects\rpc\sr c\mx\messaging\channels\HTTPChannel.as:1200])
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/onComplete()
  
  
  
  
  So, my question is, why the proxy talking AMF? When I set useProxy = false, no the AMF message is sent, and SOAP communication goes very well until I have ever setCredentials(user,pass) on the WebService (whith throws a fault, saying me that I need useProxy). Y at - it a config within the services-config. XML which tell HTTPChannel not to send a ping from the AMF?
  

  Thanks for the reply. I thought incorrectly that the proxy was an integrated/transparent entity in the AIR motor. I put endpoint URI must be the webservice, not the URI of a sort of proxy of the AMF.

  My original goal was to be able to define authentication HTTP headers, as in "Authentication: Basic...". I'd be a bad engineer if I set up a proxy just so that I could use AbstractWebService.set [Remote] Credentials (). My first attempt to do not use a proxy has been to:

  var ws:WebService = new WebService();
  ws.useProxy = false;
  WS.wsdl = «...» » ;
  ws.endpointURI = «...» » ;
  var header: URLRequestHeader =
  New URLRequestHeader ("authentication", "Basic...");
  ws.httpHeaders = header;

  However, the header was ignored. The documentation available for me is not a lot to tell me that if httpHeaders:Object wanted a URLRequestHeader or only a string or only an object of the name pair: value... None of them seem to make a difference. Is the httpHeaders parameter used only in the useProxy = true parameter?

  Thanks again for the help. Any help most to push me in the right direction toward making communication HTTP authenticated SOAP would be greatly appreciated.

• Problems after restoration

  I just got a 5 s Iphone I restored it from a backup of my Iphone 4 and everything said this worked.

  The phone has all my data but when I stop and start up it goes through Setup all over again

  asking English this and asking where to restore them again.

  Can someone please try to help me?

  Thank you

  To exclude a software problem, have you ever tried to return to factory settings, without using the most recent backup data?

  Your backup can contain damaged data, causing your problems.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If the factory reset does not help, get the phone checked by Apple:

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• Satellite L30: XP Clean install - used to work, now it doesn't

  Hello

  First of all, thank you for taking the time to read this and thanks to all those who want to contribute their thoughts. Now, the problem more in detail...

  * Summary *.
  Laptop comes with Vista. New installation of XP & drivers - all is well for more than a year. XP has become problematic, re-installed XP - same problems exist with clean install.

  * Prelude: *.
  I have a Toshiba Satellite L30, which came with Vista installed. After some disappointment with Vista, I decided to "upgrade" to XP. The XP installation went without a hiccup. Trying to find drivers for all that took time, as Toshiba is no longer distributes the drivers for the L30 model (at least not on the version of their Web site). I kept (and still have) copies of all drivers, I finally installed to get the laptop with XP works successfully, and everything was fine.

  * The problem starts: *.
  I had been using this setup for over a year, until recently, and suddenly, the laptop has become problematic (i.e. suspended in certain situations, be slow and usually does not). I have concluded that the laptop had probably lost power during the installation of Windows updates or update had problems and had become unstable. After trying different techniques to try to restore the system (System Restore, chkdsk, etc.), without success, I decided I want to do a clean install of XP.

  * Get your fingers Ready puzzle: *.
  Using the same XP CD, I used for the first installation, I begin to re - install XP. All right, until the installation reached "Record components", where it crashes. By pressing the power button to restart the computer laptop re-lance installation and installation is completed thanks to the end (perhaps because the installer reported that caused the coup be dried the second time around?). This behavior is now repeatable every time I have to format the drive and install XP. In any case, XP is now installed and boot - but guess what? It shows the exact behavior as well as before the clean install. He is suspended for the same thing and being generally does not. I continued to install all the drivers that I used the first time around, but still the same problem. (may be interesting to note that safe mode do not present any of this behavior and works very well).

  * The plot thickens *.
  So now, I think that it is likely to be a hardware / firmware issue, as it is set up exact same software. In the context of spending + long + time trying to figure out, I move using the Toshiba recovery disc that re - installs Vista and now everything works fine, no problem with anything (well, except that it's Vista). I installed all the available Windows updates updated all drivers and ghosts and then the hard drive, so I can go back at least to a configuration of work relatively easily. Thinking that this procedure + may + have restored balance for the setup of hardware, I re - install XP, but it's yet to be a problem in exactly the same way. I'm puzzled.

  * What to do now *.
  Personally, I prefer to use the cell phone as a Clipboard that is expensive to use it with Vista installed. I ordered some RAM so that he will be able to run Windows 7, but I don't wouldn't really be content of this workaround. By far, XP is the OS of choice, but I do not know what path to take then get back to work.
  I'd like to hear your 2 cents. Thanks for reading the above, I know it was long. Any help would be greatly appreciated.
  Thank you
  Ian

  I put t think that the problem is related to the lack of driver Toshiba.

  First parrowdice trying to install Win XP and Win XP does not support the VAP (value added package). VAP is released just for Vista and Win 7.

  I think that the Intel Matrix Storage Manager is also not necessary I think it might be something wrong with the hardware. Maybe HARD drive?

  Download the tool called disk HARD Drive Fitness Test. This tool creates a bootable CD that would go to a HARD disk check, I think that should help to check if a HARD drive is affected.

• 2008 R2 and Unix services for Windows - lost NIS groups

  We have 2 servers Windows 2008 R2 and 2 linux boxes running NIS/Kerberos.  One of the Linux servers also manages a secondary NIS server for performance reasons.  Synchronizes the UNIX Services that the Pb of account in the form of NIS to it, the other server will connect and auth directly on the AD server.  We've had this setup for over a year now and it is handled with problem.  Today, I ran the Microsoft Identity Management utility and lost NIS Group on the Linux server that works it's a NIS server.  On the Linux server that connects directly to the AD box groups all appear with a command id of the command line.  It seems that the Unix to Windows service app cannot be synced to a NIS Linux server.   According to me, it's a bug due to the fact that I recently updated the Windows 2008 R2 server two for the latest versions of patch a few days ago.

  Have a fix for this or could Microsoft address the issue.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I can receive emails via outlook but cannot send

  Have a few email addresses for different website that I own.

  They are on different hosts in the United Kingdom and the United States.

  I did have a problem with receiving or sending emails using outlook 2007 via these addresses with my setup current over the last 4 years in many different countries, European and Asian.

  I'm in Australia, using a via Bigpond wireless connection, I can receive emails from all my usual account, but cannot send an email using one of my addresses using outlook.

  When I test the settings, I get the following error:

  Send a test e-mail message: Outlook cannot connect to your server for outgoing (SMTP) mail. If you continue to receive this message, contact your server administrator or the ISP (ISP).

  I contacted Bigpond (ISP) and they stated that as I can connect to the internet and receive emails the problem with not with them.

  I would be very grateful for any help, thanks in advance

  Jeff

  Many Internet service providers don't allow you to connect to their mail servers unless you are on their network.  If you are not using a Bigpond network connection but tries to connect to the Bigpond mail server and uses the standard port 25 of the SMTP outgoing server, then this is probably your problem.  Usually, is authenticating with the server coming out and using a protected port 465 or 587 is required.  Authenticate you on the outgoing server and uses one port other than 25?

  Brian Tillman [MVP-Outlook]

• How to access Web Services?

  Are there APIs to access existing exposed web services?

  I services published with their WSDL files and I need to access with SOAP over HTTP.

  How do you take in blackberry? Any API or do use you some kind of libraries third thrid?

  JSR 172 is supported.

  Download the Sun web services tool to generate stubs from the WSDL.

  You searched the Forum? There is a lot of discussion on this topic.

• Why my Epson Workforce 630 does not print using my Windows 7 computer?

  I have a printer Epson Workforce 630. All cartridges are new, just replaced. The ink levels are normal on the printer and it prints documents audit nozzle locally and my small laptop running Windows 7. It is also used to print from my desktop Alienware x 51 running Windows 7. My computer is connected to Ethernet and the WiFi printer to print. This is not him point because I've had the same setup for over a year now, and that worked before. The printer is recognized on my computer. I can ping on command prompt, sign in to Chrome and it is listed as being active in my list of devices and printers. I can't print in WiFi or USB. When I try to print wirelessly, it merely display the normal print screen, no errors. Then after a few minutes, I check the print queue, and there is an error - printing... from the state table. When I connect via USB, it gives me an error of communication. Here is a good list of things I checked:

  • I checked the control panel of Verizon. The printer is active and online.
  • The printer WiFi light is green.
  • The printer has ink Epson and can print locally.
  • The printer can print from another wireless laptop and a USB connection (running Windows 7, same as my Alienware x 51).
  • The printer used to print on my current configuration of the office.
  • The printer returns the packages when ping via the command prompt.
  • The printer can be connected to the use of the local address that is located on the control panel of Verizon via a web browser.
  • The printer has a large green checkmark beside him in devices and printers and is listed as being active.

  Here is a good list of things that I tried to solve the problem:
  • Uninstall and reinstall the latest drivers for the printer (several times).
  • Connect via USB and have Windows 7 trying to print via USB. Communication error.
  • Turn off the printer and turn it back on.

  Here is a list of the things I'm doing which could have caused the problem:
  • I joke with the rules in the port forwarding Verizon Control Panel. I deleted a bunch, a few months ago. However, other printers can print, so I don't know.
  • I fiddle around with regedit, and I defrag my registry of every day. Could it have caused the problem?
  • I have a lot of process stop and disable services that I have no idea about.
  • I delete the files I'm not familiar with.

  Any ideas?
  Thank you!

  Hi carbon,

  As he did not work in the administrator account, we need to repair the operating system files.

  You can perform in-Place Upgrade (repair install) and check.
  The detailed procedure is suggested in the following link.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps!

• Publishing point does not start in windows media server

  In the VCS installation Highway starter pack is used as a controller of calls & endpoints are registered to it.  TCS is used for recording.  An existing publishing point is used for live streaming using the windows media server.  This publishing point is not launched at the start of registration for this alias record.  Windows Media Server is running locally in the CHT.  I could see below into the server logs.  Please note that this configuration has worked with this setup for over a year and it stopped working now.  Your help on this appreciated.  Thank you.

  13 2015-05 - 05T 14: 15:55 + 03:00 Info: incoming call [address = 1000, subscription_type = CALLADDRESS_E164_ALIAS, call_id = 1, Protocol = H323, rate = 5952]
  14 2015-05 - 05T 14: 15:55 + 03:00 Info: get the binding of the Conference [booking_address = 003] - no links found, to the special appeal
  2015 15-05 - 05T 14: 15:55 + 03:00 Info: check the recording start time [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id =, record_delay is off]
  2015 16-05 - 05T 14: 15:55 + 03:00 Info: creating record [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id =]
  17 2015-05 - 05T 14: 15:55 + 03:00 Info: RTP handling package [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id =, time_since_first_packet = 1907] - started the writing of media
  18 2015-05 - 05T 14: 15:55 + 03:00 Info: creating call [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = inbound, log_tag = 0, Protocol = H323, speed = 5952, remote_address = 5001]
  19 2015-05 - 05T 14: 15:55 + 03:00 Info: updating temp filename in DB RTP [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, temp_rtp_dump_file = e:\livedata\RTP150505141555_1.ogg.tmp]
  20 2015-05 - 05T 14: 15:55 + 03:00 Info: setting call to life [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = inbound, log_tag = 0, Protocol = H323, speed = 5952, playback_number = 1520] - found number of reading
  2015 21-05 - 05T 14: 15:55 + 03:00 Info: setting call to life [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = inbound, log_tag = 0, Protocol = H323, speed = 5952, playback_number = 1520] - found number of reading
  2015 22-05 - 05T 14: 15:56 + 03:00 diagnosis: main video frame rate of adjustment reading [frame_rate = 30]
  2015 23-05 - 05T 14: 15:56 + 03:00 Info: from decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = inbound, log_tag = 0, Protocol = H323, speed = 5952, bitrate_kbps = 128 channel audio =, payload_type = AAC - LD]
  2015 24-05 - 05T 14: 15:57 + 03:00 Info: from decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = inbound, log_tag = 0, Protocol = H323, speed = 5952, bitrate_kbps = 4000, channel = video, payload_type is H.264]
  25 2015-05 - 05T 14: 15:57 + 03:00 Info: video decoding, the decoder Message [call_id = 1, decoder = video Codian, message = decoder H.264 initialized]
  26 2015-05 - 05T 14: 15:57 + 03:00 attention: decoding video, decoder has reported an error [call_id = 1, error_message = FAILURE to decode the packets] - request shipping FPU
  27 2015-05 - 05T 14: 15:57 + 03:00 Info: exit conclusion size; scooping [optimal_output_size = 1280 x 720(16:9), output_bucket = 796 x 448, size_ext = 1280 x 720(16:9), size_main = 512 x 288(16:9), squared_ext = 1280 x 720(16:9), squared_main = 512 x 288(16:9)]
  28 2015-05 - 05T 14: 15:57 + 03:00 Info: transcoding settings [extended_frame_rate = 0, extended_size = 1280 x 720(16:9), layout = 2, main_frame_rate = 0, main_height_ratio = 0, main_size = 512 288(16:9), negotiated_bitrate_kbps = 4128 x, output_bitrate_kbps = 800, output_frame_rate = 30, output_frame_rate_max = 30, output_size = 796 x 448 (199:112), quality = 2, quality_bitrate_kbps = 800]
  2015 29-05 - 05T 14: 15:57 + 03:00 Info: implementation of encoding [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, model =

  ]
  2015 30-05 - 05T 14: 15:57 + 03:00 diagnosis: miniature timer setting point zero [call_id = 1, zero_point = 0]
  31 2015-05 - 05T 14: 15:57 + 03:00 attention: decoding video, decoder has reported an error [call_id = 1, error_message = FAILURE to decode the packets] - request shipping FPU
  32 2015-05 - 05T 14: 15:57 + 03:00 Info: audio decoding, Message of the decoder [call_id = 1, decoder = Codian Audio, message = decoder AAC - LD initialized 128000 bps]
  2015 33-05 - 05T 14: 15:57 + 03:00 attention: decoding video, decoder has reported an error [call_id = 1, error_message = FAILURE to decode the packets] - request shipping FPU
  34 2015-05 - 05T 14: 15:58 + 03:00 last message repeated 5 times
  35 2015-05 - 05T 14: 15:58 + 03:00 Info: output path of adjustment [call_id = 1, path = e:\livedata\143082455700-82801609.wmv]
  36 2015-05 - 05T 14: 15:58 + 03:00 warning: decoding video, decoder has reported an error [call_id = 1, error_message = FAILURE to decode the packets] - request shipping FPU
  2015 37-05 - 05T 14: 16:04 + 03:00 last message repeated 25 times
  38 2015-05 - 05T 14: 16:04 + 03:00 Info: check the memory usage [private_MB = 460, private_MB_previous = 118, ram_free_MB = 3245, vm_used_MB = 597, vm_used_MB_previous = 201, working_set_MB = 184]
  39 2015-05 - 05T 14: 16:08 + 03:00 warning: State of notification Windows Media writer, an error has occurred in WMT_ERROR [call_id = 1, address = http://xxx.xxx.xxx.xxx:8080 / _3868463432921, error = error code = (0x80072eef)]
  2015 40-05 - 05T 14: 16:08 + 03:00 Info: adding Windows Media serverpush out [call_id = 1, async = 0x80072eef] - after waiting

  Yes, the next step that I was going to tell you to do, is to disable authentication on the WMS server.

  Take a look at the following for TCS and WMS configuration guide.  She referred to using an external WMS server, but it can apply to the internal WMS on the TCS itself as well.

  Configuration of Cisco's TelePresence version 5.x content server to use an external Windows Media Streaming Server

• Namespace in the message of reply in PeopleSoft

  Hi all

  I use SOAP over http for integration with 3rd party system. We generate the WSDL and it made available to them.

  They are facing a problem with namespace in the response message because it is different with what is defined in the WSDL file (it is coming as http://peoplesoft.com/ < Service operation > response. )

  
  

  The namespace in the request message is correctly picking up the target namespace defined in the Service. Can you please thanks to some tips?

  What are the Tools version are you on? It is a known problem.

  Reference:

  E - IB: Service Response Message Namespace does not match the Description in WSDL (Doc ID 1147654.1)

  There are few workarounds:

  (1) changing the WSDL file.

  (2) using a basic part container set of lines of the message.

  (3) add a transformation on the message of response using XSLT.

  In the past, I used container based part of lines messages to work around this problem. I don't think that it is always a question in the latest version of the tools.