At a reader DVD Toshiba upscaling option?

Similar Questions

• Accidents of software DVD Toshiba Qosmio Player X 300-12 H

  Since then, I have buy havn't been able to use from Toshiba DVD player software.
  I had the laptop for 2 months and just after Christmas, I realized that I had not tried the Toshiba DVD software because I used the player of Windows Entertainment Center.

  I read somewhere that the quad core upscaling works only if the own of the Toshibas software is used then I put the Die Hard 4 in the drive and launch the player - the first time, the player has launched and then crashed, after that first of all try the player wouldn't even go beyond its box of start before crashing.

  The information below comes from the screen of windows vista program crash

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: TosHDDVD.exe
  Application version: 3.1.0.0
  Application timestamp: 491d 3076
  Fault Module name: klg.dat
  Fault Module Version: 6.0.0.0
  Timestamp of Module error: 48435b 23
  Exception code: c0000005
  Exception offset: 00003dd0
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 2057
  Additional information 1: 4eea
  More information 2: c18ca31a42c932c8a4a5ec14c342d78e
  Additional information 3: a318
  Additional information 4: 96c6345fef3b1ab30c968d3ee6b39312

  I tried uninstalling the drive and by downloading the latest version from the Toshiba site,.
  I've updated to the latest version of the BIOS, graphics and any other Tempro reported as available, but the DVD player simply refuses to work.

  My next step is to restore the laptop to default in the case that it's something I've done in the first month, but I am reluctant to do it because I always forget to backup everything and lose important files (doh!)

  Any help would be appreciated

  I use Satellite P200 and reader DVD Toshiba was preinstalled too. After a few months, I was not able to start. Whenever there was a message that something is wrong. To be honest, I don't remember what exactly was written.

  Anyway, I wasn't able to do anything. After a clean OS install, everything was OK again, but I removed and now I use the other player that works perfectly. No one said I should use all the stuff pre-installed. OK a Toshiba DVD player has much better design but I watch the movie to full screen and I don't like the design. ;)

• Satellite L350 - drive DVD Toshiba turns off my color scheme

  Hi all. I use a Satellite L350 with Vista Home Basic.

  According to the instructions on the help page of DVD player I have the color scheme defined in Windows Vista Standard and the display settings to the highest (32 bit), but DVD player insists on changing the Windows Vista Basic color scheme.

  I have looked through the settings for DVD playback, but could not find something that looks like it could remedy this. Everyone knows this or knows how to fix it?

  Thank you!

  Hey Buddy,

  I don t use a reader DVD Toshiba but have you tested another software? You can use VLC media player for example. He plays a lot of audio and video files and it freeware tool. I like it a lot because it of smaller and faster than other players.

  Just use Google to find. I guess that you will be satisfied too. ;)

• Cannot read Blu - ray discs using a DVD Toshiba or Corel WinDVD player

  We just bought a blu - ray disc and tried to play on the laptop with two programs that have been pre-installed on the computer.

  Drive DVD Toshiba says "this player does not support playback of the DVD" O.o

  And Corel WinDVD says "WinDVD information service is not yet ready. "Please try again later".

  I've updated the Win DVD player and he always made the same mistake.

  Drive works in our other blu - ray player.

  How can I fix?

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Equium - Toshiba DVD Player can't read DVD

  When I insert a DVD into my internal DVD Toshiba Island DVD player application starts but then displays this error message: -.

  + * Unable to output the video to an external device. Please change your device display by pressing Fn + F5 keys after the end of the application * +.

  I press Fn + F5 keys according to the directives and the drop-down list display Fn shows the symbol of the laptop before retreating off the screen. But still the DVD returns the same message and will not play. I find myself with Windows Media Player to play the DVD.

  What is going on?? What I am doing wrong?

  I'm new to the forum please excuse if this is a repeated question.  :-(

  What satellite notebook do you have?
  What operating system do you use?

  Try to update the DVD player that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Use an external monitor?

• Satellite Pro A40: CD-RW/DVD drive cannot read DVD

  Hello

  The reader combo CD-RW/DVD on my Satellite Pro A40 (14 months) stopped reading DVDs (DVD - R or the video, have not tried other types), although it can play DVDs some time. I've cleaned the disc by using a cleaning disc. I think the problem started when I upgraded the OS to WinXP SP1 to SP2, but not sure. I tried CD - R and CD - RW writing and no errors were reported, but the CD that result are unusable (can't be read in the drive, with the LED blinks a few times and then to infinity).

  Someone has an idea how solve this ptoblem? Thank you

  Richard

  Hi Richard,

  I suggest that you go the Device Manager on your laptop and then remove your devive DVD-ROM in the list. When you have done this and then select the option "Find new hardware" and allow Windows XP Reinstall the device and associate the appropriate driver.

  HTH

• Qosmio E10: The drive only reads DVD-R double layer / DVD + R

  Hey all,.
  I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
  He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
  This disc, Mat * a UJ - 830 s equips the Qosmio E10.
  I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.

  There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
  Thanks for reading.

  Alcahest

  Hello

  AFAIK this unit has a DVD Super Multi drive and it must use media suite:
  CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
  DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)

  In addition, these speeds are available:
  Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
  DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)

  Maybe this drive can t use the double layer? I think he uses a normal DVD

  Good bye

• Drive DVD Toshiba x 64 for Windows7

  Hello.

  As in the title I initially installed Vista Ultimate x 84 and in this system, the Toshiba DVD player program. It's ok because it converts the videos in HD. On the second partition 2 installed Windows 7 Ultimate x 64.

  My question is if anyone knows where I can download this DVD Toshiba x 64 drive in Windows 7. In 84 of the line DVD player x when you install the x 64 line displays an error.

  Hello

  If you would simply upgrade the Win Vista to Win 7 then Toshiba preinstalled applications would be repries by Win 7.
  Where the drivers or tools are not published for Win 7 it s better to make an upgrade instead of clean install.

  Right now, you have two options; You can download the player out to Vista or you will wait until this player would be released for Win 7

• Satellite 2410-603: SD-R2212 cannot read DVD-R or DVD authentic

  Hello
  can anyone help, my dvd player on my authentic satellite 2410 603 can't/wont read dvd - r or DVD IE Disney etc.
  DVD + r seem to be ok, someone has any ideas?

  Hello

  Strange. Check if the firmware update will solve this problem:
  eltype http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=ISH_ARC&model=SDR2212&spr_mod = COMBOSL & spr_model = SDR2212

• Re: My driver TEAC DV-w28ECT used to read DVD and CD now it reads only DVDs

  My TEAC DV-w28ECT driver used to read DVDs and CDs, now, he reads only DVDs. What's happened and how can I solve this problem? I have Windows Vista

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• UJDA750 will not read dvd - r

  Subject he says all new Tecra M4 and integrated carpet * a UJDA750 DVD/CDRW combo won't read DVD-R, in fact until I uninstalled the DLA & NTI software it's rather rude on the reading of a CD - RW!

  What is the point of a new DVD player that can not read the DVD-R commune!

  I want to emphasize that the media reads fine in 5 different readers other than that burned the dvd - r to the origin. I have tried 1 x, 4 x & 8 x media with the same disappointing results.

  Hello

  I don t know why it isn't possible, but have you checked all other CD for writing?
  If this problem occurs with any type of media, so it s best to contact a Toshiba Service partner and ask for verification of the disc.

  Read CD - RW discs, to a UDF reader software. Discs CD - RW are written in UDF 1.5 format. This UDF reader software can be downloaded from Adaptec "s web site: www.adaptec.com"

  This software can play CD - RW discs written with rewritable CD drives that are written in UDF format. Without UDF reader software, CD-ROM/DVD-ROM in s Toshiba laptops can only read ISO 9660 discs.

  Good bye

• ODD on my Satellite C70D-A-11F will not read DVDs

  WEIRD on my t Satellite C70D-A-11F (05.2014) won read DVDs more. No matter that one I try this simply does not work.
  The latest driver is installed.

  Message was edited: assignment has been translated

  Hello

  If the optical disk drive is installed properly maybe bed lens dirty. Try to clean it.

  Otherwise, if your ODD can read CD but not DVD it can also be a malfunction of the equipment. The reading lens cannot be calibrated properly and failed to find the right position to read DVD media.

  In this case, ODD must be exchanged.

  Try to clean the lens and see if the problem still occurs. If so, contact the nearest Toshiba service provider and ask for help.

• Tecra M2: unable to read DVD or use WinDVD 4

  Recently, I replaced my Tecra M2(: MODEL NO PTM20E-0MTGR-EN, SERIAL # 54579007G) hard drive and reinstalled windows xp.

  I did most of my files on an external drive, but I don't have the original installation discs. I am now unable to read DVD or use Win DVD 4 (which came with the machine.

  Is there a file I can download to reinstall dvd playback or otherwise what method can I use to wind dvd port 4 from the external hard drive (there the dll and .exe file but no installation file)

  Thanks for your help

  If you have written about WinDVD player bundled with the laptop, in this case, the situation is as follows: WinDVD player is part of the installation image and may not be downloaded from the Toshiba download page.

  If you want to use the same application, you need to download a free version of the download from producer page or buy it as all other applications. When you buy the computer Toshiba laptop to ensure that each customer can view DVDs and install WinDVD player. If you use original recovery image, you can use it every time but if you want to use your own OS, in this case you are solely responsible for the installation of the OS and software to use.

  If you have preinstalled with success the OS I recommend using any DVD player application. Intervideo WinDVD, one do not.

  Good bye

• Satelitte P850-132: optical drive read DVD but not CD

  Hello

  I have a P850-132 of Satellite of Toshiba (PSPKAE) with a Mat * one optical drive DVD-RAM UJ8B0.

  I have the latest drivers for the optical drive installed (6.1.7601.17514).

  Problem: Reads DVD very well, but cannot read the CD.

  When you try to play a CD, the player makes a low clicking noise: ~ 4 quick clicks, then a second of silence, ~ 4 quick clicks... The player repeats this model by clicking silence/4 times, then goes silent. Nothing else happens.

  The drive is defective? Is there an easy way to check if it is?

  The pointers will be deeply appreciated :)

  Hello

  Looks like the laser lens is unable to read data from the CD.
  Try to clean the lens of the laser using a fluid tip and alcohol of wadding.
  In my case it helped to get the other disk works on my laptop.

• Satellite 2450-114: DVD - RW no readable with the reader DVD DTS-6012

  Hello

  I bought some Verbatim DVD - RW (media code: MCC 01RW4X) but it cannot be read by the reader Toshiba SD - R6012 DVD to my laptop Satellite 2450-114.

  However, I have the latest official firmware, i.e. the number 1334.
  Is it possible to fix it?
  Thank you
  Best regards.

  Can your laptop read DVD original (movies) or perhaps DVD-R blank?