Qosmio E10: The drive only reads DVD-R double layer / DVD + R
Hey all,.
I was wondering if someone could forward that request to the person responsible slimdrive firwmares to Toshiba.
He finds that the carpet * a UJ-830 s drive not reading DUAL LAYER DVD-R / DVD + R (although it reads DVD-ROM OK DVD9).
This disc, Mat * a UJ - 830 s equips the Qosmio E10.
I have searched everywhere for a firmware update without success, so Toshiba are my only remaining chance.
There is an update of the firwmare in of the Qosmio E10 driver section but that's UJ - 831S (and it does not work on UJ-830 s) :/
Thanks for reading.
Alcahest
Hello
AFAIK this unit has a DVD Super Multi drive and it must use media suite:
CD-ROM (Read) CD - R(read/write) CD - RW(read/write) DVD-ROM (read)
DVD-R(Read/Write) DVD - RW(read/write) DVD + DVD + R(read/write) RW(read/write) DVD - RAM(read/write)
In addition, these speeds are available:
Maximum speed CD-ROM(24x:read) CD-R(24x:write) CD-RW(10x:write) DVD-ROM(8x:read)
DVD-R(8x:Write) DVD - RW(4x:write) DVD + DVD + R(8x:write) RW(4x:write) DVD - RAM(3x:write)
Maybe this drive can t use the double layer? I think he uses a normal DVD
Good bye
Tags: Toshiba
Similar Questions
-
Solutions to the problem of CD/DVD drive cannot read DVD discs
This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.
Solution1. Clean the DVD disc
If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.
After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.
Option2. Check the disc to see if it has been damaged
Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.
Solution3. Clean or repair the CD/DVD drive
When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.
Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.
Post edited by: Newhampshireguy
Thanks for sharing your experience with us!
I think your assignment might be useful to others here in the community. -
Need driver for reader DVD SD-C2302
Hello! I m trying to get the driver for my DVD player a SD-C2302 and I can´t find in the web page Toshiba´s. could is it someone, please, tell me where I can find it?
Thank you.
Hello
Why do you need the driver for a DVD player?
As far as I know the drive uses the standard Windows drivers and it s not necessary to install any other drivers. -
HP Pavilion a6109n Vista 32 bit
Windows cannot load the driver for ATAPI DVD A DH16A1LCdRomHello
Try the Microsoft fix it Center. You receive this error code?
-
HelloWith the help of the window - 8 installed on newly purchased Dell Inspiron notebookFor a few days, I wasn't able to use my CD DVD drive because there is a driver problem, here's the trouble shoot reportcould someone help me how this issue be resolvedTSSTcorp DVD +-RW Drive SN - 208BB has a driver problem fixed is not fixedThere is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. The driver must be reinstalled.Information InformationalDeviceName: TSSTcorp DVD +-RW Drive SN-208BBID: SCSI\CDROM & VEN_TSSTCORP & PROD_DVD +-RW_SN-208BB\4 & BB94CF & 0 & 040000Error code: 19Reinstall the complete device driverThere is a problem with the driver for TSSTcorp DVD +-RW Drive SN - 208BB. Reinstall the driver may resolve this issue.
You can check the following registry key? :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?
If so, for UpperFilters and LowerFilters, value which is listed under "data"?
-
Symptom: after installing and played Dragon Age Origins for 2 days, the disk may suddenly no longer be read.
Hardware: LG drive DVD Super-Multi GSA-H42L
(1) I tried to uninstall the device driver and let Windows reinstall it-no luck.
(2) modified the registry to delete the UpperFilters and LowerFilters - no luck.
3) confirmed is that with some discs - Audio CD work well, play Dead Space DVD works fine, X - Men 2 DVD plays very well. Dragon Age has the rotation of the drive for 30 seconds then the D: drive shows nothing. Fallout 3 did the same thing.
(4) assuming that it must be a hardware problem, because the disc was 2 years old and has ordered another...Equipment: Sony Optiarc AD-7240 s
Same EXACT problem as described above!
Am seriously thinking about an upgrade to Windows 7 could be my best bet, or at least a relocation complete. Machine was set up about 18 months ago and has no other problems. Any help would be appreciated.
Hello Eccleston,
Thank you for your message. You may have already checked this but have you checked your DVD on another computer to make sure that they are not damaged or scratched?We can't wait to hear back on your part.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I try to update the missing drivers, but still does not work
I uninstall deamon Tools, reboot, then do the test again and if the drive is still problomatic, in Device Manager, uninstall the cd/dvd drive and reboot again
And if the problems continue to update your drivers from Acer site, specific to your model and the version of win7 bit
-
Equium L20-198 - can only read DVD but no CD
My DVD-Rom/COM reader only reads CDs and DVDs. Can someone please tell me if I need a new drive or if it is a software problem?
If I need a new disk, can I use a generic and what would be the part number?
Thank you.
Hi mate,
Have you tried different CDs? Perhaps that some CDs are scratched and t can be read properly.
Also, I had a similar problem and the reason was that it was dust on the lens. I used a cloth to clean microfiber and after that, it was possible to reread my drive! :)
-
cd rom BD drive not reading dvd
Hello
HP Pavilion dv7-4004tx Entertainment Notebook PC
not reading dvd, loads ok and led flashes when inserted, see also turn when you remove the disc, hear the spinning.
device appears in Device Manager and properties shows player works ok. forums went to cmd to the list volume no volume for this player, said fixit manufacturer contact, itunes removed forums, also download CC and ran and uninstalled Player multimedia hp
HP/load d med player link forum, charge volume of dvd and DVD played ok ok list once then were not able to play because, in the forum saw high and low filter option did not all filters, saw a link to download a new bios, but have not yet found this thread
This seems to be the only one of the options of discussions that I saw that I have not tried yet, any suggestios greatly apreciated.
Ah bios downloaded then can read the disc, then would not play Bahahaha
Device Manager removed reboot drive and would be ok olay
Thank you guys got all the information from older posts
but don't remember those who to give laurels
Ty all even when
-
Satellite Pro A40: CD-RW/DVD drive cannot read DVD
Hello
The reader combo CD-RW/DVD on my Satellite Pro A40 (14 months) stopped reading DVDs (DVD - R or the video, have not tried other types), although it can play DVDs some time. I've cleaned the disc by using a cleaning disc. I think the problem started when I upgraded the OS to WinXP SP1 to SP2, but not sure. I tried CD - R and CD - RW writing and no errors were reported, but the CD that result are unusable (can't be read in the drive, with the LED blinks a few times and then to infinity).
Someone has an idea how solve this ptoblem? Thank you
Richard
Hi Richard,
I suggest that you go the Device Manager on your laptop and then remove your devive DVD-ROM in the list. When you have done this and then select the option "Find new hardware" and allow Windows XP Reinstall the device and associate the appropriate driver.
HTH
-
Cannot find the drive "D" (CD/DVD)
Hello
There was a D drive on my laptop before and now there isn't.
I have no idea how he disappeared. The reader is for both CD and dvd discs.
Now, when I put the discs in the drive, they start charging, but finish. I also can't find the drive in "My Computer".
Could someone help me on how to recover the drive?
Hello
You mean that the CD/DVD drive?
In the first case, you should check if the CD/DVD drive appears in Device Manager.If you see a yellow exclamation point next to the CD/DVD drive, then you must remove the STRANGE since the Device Manager.
In addition, you should access the registry using the regedit command and should remove the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}After this procedure to restart the computer again!
-
How can I find the driver for a DVD PC with XP and Service pack 3 Player
24/07/2012, I bought Microsoft Office 2010 home and student. The DVD on my PC wouldn't read the disc to install Office. I called Microsoft and technology who have downloaded it told me that the driver did not work on the DVD. I looked at everything on my computer and it all States that everything works correctly. I need to know how I can find the drivers on my computer. A search provides all kinds of things to sell to download, but I couldn't find anything to tell me how to locate the drivers. Is there a way I find them and archive them without having to buy something or to download something that I can see what who and where they are and determine whether any of them are defective?
Thank you.
It is not a problem for the responses of the Office forum, but try this: http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
The computer can play other DVDs besides the desktop with what drive it is having a problem? If not, it's a player or a Windows problem. If Yes, then this particular desktop drive might have a problem (dirty, defective, etc.). If it turns out to be a disc problem, MS supports will replace him. http://support.Microsoft.com/kb/326246
Or, just to work around the problem by downloading the installer here: http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/here-are-the-download-locations-for-office-2010/ac67aa2f-dc1c-46f4-8b1d-ca00b3f02a18
-
DVD/CD drive will read DVD but not CD
My DVD player plays DVD but not CD. Whenever I try to play a CD, the player is a kind of hum noise. Finally, the Player opens and a popup tells me to insert a disc.
I tried a system restore and the automated Microsoft fixit tool. Nothing has worked.
I use Vista Ultimate.
Any ideas? Thank you.
Hello
Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Not able to install the driver for CD/DVD drive
CD - dvd burner driver
accidentally remove my cd - dvd burner driver while upgrading windows vista to windows 7. tried to download from Sony eSupport and only can be updated with windows vista, is there any other driver that I can download to solve my problem? If it is fake where I?
CD/DVD players use fairly generic drivers. Reach:
Start-> Control Panel-> Device Manager.
Expand the tree next to CD/DVD players. Right click on the CD drive and select uninstall. Wait for the driver to complete uninstallation then right-click again and select "Update driver software".
All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
DVD drive cannot read DVD - RW
Hello
This is my first time on the forum. Not used!
I have a question.
my dvd player reads and read DVDs, but when it comes to simple dvd rw it doesn't recognize or burn it on a dvd - rw.
any suggestions?
Hello
Maybe this car doesn t support DVD - RW?
What phone have you and what DVD player has this device?
Maybe you are looking for
-
Serial communication error VISA with LUDL stage controller
Hello I'm trying to control a micro-positionnement made by Ludl stage. The model is Ludl MAC2000. It seems that the RS232 comunnication is implemented because I can talk to the controller using HyperTerminal. However, when I want to do the same thing
-
Looking for the character "$" in a regular expression
I try to use the vi "Regular Expression to Match", but what I'm trying to find is a dollar sign followed by a space. Using the slash codes allows me to specify a whitespace character (\s) but I can't find how to specify the $. I tried \x24 and \36 tr
-
Slow WRH54G wireless file transfer
Good day to all! I'm having a problem with the speed of transfer of files on my WRH54G. It is rated at 54Mbps theoretically, but I'm just about 12 Mbps from my laptop to the office and vice versa. I tested different file sizes, but it gives the same
-
BlackBerry smartphones can not synchronize correctly after the 4.5 upgrade
I have a Pearl 8100 and just updated to 4.5 v. I didn't know anything about the updates specific to the provider and just updated directly from Blackberry.com. Now when I try to sync (I use Outlook 2003 via Desktop Manager v4.2.0.14) he wants to add
-
creation of the clouds don't me already DOWNLOAD apps
"descarga error contact support client al con ' dice