At startup, the computer beeps very - Compaq Presario s # 31316953

Similar Questions

• How can I improve the performance of my compaq presario V2000, its very slow

  How can I improve the performance of my compaq presario V2000, its very slow!

  According to many things (specifications, you have now installed vs the programs he came originally with programs, etc.)-it may or may not work better that ever he does now.  However, in terms of nothing other than the software and others on the subject - there are some things you can do to optimize performance.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I deleted the sound on my compaq presario cq62 I need to reinstall

  I deleted the sound on my compaq presario cq62 I need to reinstall

  Hello

  Go to the following site.

  Compaq - Support for desktop computers and laptops Presario. :
  http://h18000.www1.HP.com/CPQ-country/cpq_support.html?JumpID=hpr_R1002_USEN

  In the Find box, enter the number of the model of the computer, and tap Next.

  This will take you to the page with all the support options for this computer.

  Concerning

• I found mrtstub.exe on an external drive and the computer is very slow.

  Is the "mrtstub.exe" a virus since I found it on an external drive (in fact, it's on 2 different external drives)?  I didn't get any warnings of Norton scan or Microsoft analysis, but the computer is very slow and sometimes hang up when I try to turn it off.

  mrstub.exe is part of the Microsoft Malicious Software Removal Tool.

  See Question 21 in the FAQ article: http://support.microsoft.com/kb/890830

• Clean up unwanted files, the computer is very slow

  The computer is very slow.  Scan says that junk Files are full.  How to clean unwanted files?

  Hello.

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  And then:

  Just click on the link here:http://www.piriform.com/download select & download it.

  step (1) when finished downloading, click CCleanersetup & run the SETUP & INSTALL IT

  step (2) make a right click on it, click "Open or install" select ok or Yes if asked by the administrator.

  step (3) when you have finished open or run the CCleaner

  full market (4) on the open window of CCleaner, the word "windows" in the upper left corner of the screen, the check box everything except 'THE WIPE FREE SPACE' (leave this box clear)

  Step (5) click on 'applications' (next to windows) & case "alone".

  (6) level in the lower right corner of the window of CCleaner click "run cleaner" a new window will open, and then click ok.

  step (7) when the cleaning is finished, close all files, restart your computer and see if it works!

  If the problem persists, there are more ways to solve this problem!

  PS: Click 'YES' If this was helpful or respond to get help.

  He helped?

• Compaq Presario SR5214x: Replacing the CMOS battery for Compaq Presario SR5214x desktop computer

  How to replace the CMOS battery on a Compaq Presario SR5214x desktop computer. What type of battery? Where is the battery? Thank you (deleted content)

  @ernier

  You will find how to do here.

  http://h10032.www1.HP.com/CTG/manual/c00840496

  REO

• "Beep code" Compaq Presario SR5510F POST

  My Compaq Presario SR5510F fails his POST and gives 1 short and 1 long beep, repeatedly. What does this code mean? I can't find this code on any list of beep codes, that I managed to locate.

  Blessings,
  
  Father of Dal
  

  FatherDal wrote: Dear Hanspuppa, thank you very much for your help.  Actions suggested by your response seems to have solved my problem.

  Hello FatherDal, it's really good news. If you have determined that your system has at least one memory defective Strip, and you want to replace the defective module, you can consider replacing all the memory modules and purchase of some additional memory that can increase the performance of your system.

  Here is the link to the specifications for your system. It shows that your system shipped with 2 GB of memory system.

  It also shows the system supports up to 4 GB of memory system and your system shipped with Vista x 86 (32 bit).

  All 32-bit operating systems can only recognize up to 3.25 GB to 3.5 GB of memory. The x 64 bit version can recognize 4 GBs whole memory system.

  I would say that the upgrade of your system memory to 4 GB into 4 X 1 GB modules. Even if your current operating system would recognize the 4 GBs set of system memory, you should see a performance increase with additional memory.

  Here is the memory critical link where you can buy compatible memory for your Compaq system.

• Unable to connect to the internet with my Compaq Presario CQ5500F after a clean install of Win 7 64 bit

  Hello

  I recently did a clean install on my Compaq Presario CQ5500F desktop, but when I finished, I realized that I could not connect to wireless internet almost anything. To clarify, my internet worked before the clean install. I know exactly of what readers have been installed, but I do not know the network controller has a yellow question mark on it now. (See attached image)

  In addition, it seems that the computer does not have a wireless card although I was previously using an omnidirectional antenna external wireless connected to my wifi.

  I have already visited the HP/Compaq site here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4209... to install the drivers, but it seems that the network controller, it does not install correctly.

  Can someone help me please? I am very frustrated.

  In fact, I just solved it!

  I looked up the material ID I had just posted on Google and found that someone had the driver on his Skydrivefiles. Then I followed their instructions and went into the Device Manager and selected Update driver the driver of your properties of network adapters tab and pointed on the expanded files.

  Turns out I need files for Ralink RT61 Turbo Wireless LAN Card.

  Everything works again!

  Thanks for me direction in the right way, Paul!

  I hope that someone else has acquired this too!

• The fan on a Compaq Presario CQ57 Windows laptop settings

  Hello, I have a Compaq Presario CQ57 and the fan runs all the time at full speed. I opened the laptop and did a fan and cleaning of the motherboard, I applied thermal paste, I changed in the bios the option #Fan always on # Enable to disable, I updated the Bios but still nothing... it sounds like a jet of fighter.should I change my fan? someone who has a Council?

  I already ordered the fan and I will keep you posted as soon as I get it and install it.
  Thank you very much

• Where can I find the drivers for my Compaq Presario V2000?

  I had to reload XP Pro on my V2000 Compact and did not have the drivers for this computer. I'd love to find the drivers from loading on this old computer.

  Keith

  Hi, Keith:

  You have a Compaq Presario V2312US Notebook PC.

  Here is the link to the support page and drivers for your laptop.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=500786&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  Please go back and edit your post above and delete this as someone's windows product key can use it to illegally activate another installation of Windows.

  Paul

• At the opening of my Compaq Presario I get the Microsoft message "Printer Card transfer Monitor has stopped working"

  I have a Lexmark X 6570 all in one. I tried to restore to comm. between the printer and my Compaq. I uninstalled the Lexmark program (twice) and then downloaded the latest driver from Lexmark, but always the same message. What can I do to recover my printer? It is very important for me. In addition, the message in the window of the printer when I try to scan shows "cannot download the application list. Can someone help me with this? As you can probably see, I'm not very 'computer', but I can follow directions! Thank you and have a great day!

  I assume you are using the wireless printer. You have made no changes to the network recently? For example, new router or wireless password has changed.

  For the problem of scan, I found the following procedure works.

  • Enter the IP address of the printer in the address bar of your browser and press ENTER. If you do not know the IP address, print a Network Setup page using the procedure shown on page 52 of thehttp://www.lexmark.com/publications/pdfs/2007/6500/v4897402_en.pdf user's guide. The address will be probably 192.168.x.y where x.y is the number assigned to the printer.
  • Now, you will be connected to an administrative page on the printer.
  • Select Configuration.
  • Select a scan in the management of network hosts.
  • Check users to delete all registered.
  • Select Remove.
  • Try to start a new search.

• The Rams - EE of Compaq Presario CQ60-116 upgrade

  Hello

  This is my first post so I think I erased my point of view, which may not be 100% good.

  In any case, short story...

  I have a Compaq Presario CQ60 - 116 EA
  http://support.HP.com/us-en/document/c00820047
  
  and I would like to upgrade of his memory, I know that it can take up to 4 GB, but I'm not sure of the maximum speed of memory the motherboard can take and use fully without being too high speed. (for example, I won't buy a 1333 MHz Rams beacause I know that it is more than enough and that it is a waste of money)
  
  I am confused between buying a 667 MHz or a 800 MHz. So, could someone give me a hand here please
  
  Thanks in advance...

  Hello:

  You want to buy 2 x 2 GB of PC2-6400 memory for the processor T5800 in your notebook.

  Memory running at 800 MHz

  http://Ark.Intel.com/products/35581/Intel-Core2-Duo-processor-T5800-2m-cache-2_00-GHz-800-MHz-FSB?q=T5800

• need to link to get the driver for my compaq presario pc, reinstalled using the windows xp operating system

  someone sent me information to try to fix my cd/dvd doesn't work do not and after that following the steps, it is still not work.i said, maybe I need to reinstall the driver if someone can send me the link to microsoft so I can get the driver for reinstall-thank you

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  3. What is the number of the model of the computer?

  Method 1:

  I suggest you follow the link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  I suggest you to install the drivers from the manufacture of the product and check.

  http://www.Compaq.com/country/cpq_support.html

• The computer beeps repeatedly when you try to start

  Original title: when I start the computer I spend two long beeps and over__first we're 2 long s, second one is long of 5 sec

  It's a pain

  Check the manual of your computer or web support page - this indicates a hardware failure, but since we cannot say what kind of computer you have has no way for us to interpret it for you.

  "dragon1707" wrote in the new message: * e-mail address is removed from the privacy... *

  It's a pain

• Icons displayed incorrectly at startup, the computer is unusable for several minutes

  My computer is less than a year, I'm running Windows 7 Professional, and for several weeks my computer acted strangely. When I turn on the screen displays properly, however some or all (it seems to change every time) of my icons appear as these things white paper folded. It continues for several minutes during which I can't run any programs, but I can use my mouse pointer and the loading symbol when I move the taskbar. After a 5-10 minutes (I've not timed, but it might be compatible), the icons to revert to the normal and my computer seems to work perfectly well. Any idea what the problem might be?

  When a Windows computer starts in place, some of the non-Windows installed on the computer programs also starts alongwith. In your case, it seems that some of these startup programs is responsible for the delay. You can disable startup programs and services non-Windows on the computer by placing the computer in what is called a "Clean-boot". If the problem does not appear in the clean boot state, you can track Windows service start defective or not programme following a policy of division and conquere.

  This process takes a little time. I would say by following the instructions in the following article to diagnose the problem:

  http://support.Microsoft.com/kb/929135