"Beep code" Compaq Presario SR5510F POST

Similar Questions

• At startup, the computer beeps very - Compaq Presario s # 31316953

  I bought a Compaq Presario s3310 om (2600 + amd athlon with XP Home Edition.) S # 31316953)

  When I start the computer the computer beeps continiously and nothing happens after that. I did some research and would like to confirm that it is a RAM problem. The original Ram has 512 MB of ddr sdram memory. I did a search on the diagnosis Compaq Bios Beep codes and a beep very indicates error memory - reinstall or replace and re test. I'm on the right track?

  Nothing is lost by air, dust off the RAM slots.  Not sure you interpretation of the beep codes are correct.

  Beep codes: http://support.hp.com/us-en/document/bph07107

  What is more troublesome is buying a vintage 2003-04 machine that did not work. In addition, reinstall all the other cards.

  You can also try a system recovery not destructive http://support.hp.com/us-en/document/c00007689

• Compaq presario sr5510f #, vista Home premium, 32-bit, service pack 2.

  My registary is damaged, windows will download not some updates from HP, error 31, I uninstalled the adapter isatap #2, advised, impossible to reinstall the network adapter, the dvd player reads no DVD/CD automatically... also when I get a flashing of HP on the bar so far... when clicked low notification disappears...... me up date installed.some time when I click on until this day I catch a virus... APART FROM ALL THIS HP IS VERY GOOD... PLEASE NOTIFY.

  my friend, I ran every virus scan, in safe mode with net working... .i have googled... Clean.i know that I have a parasite... but I'm learnig... What do I download to clean my pc... It will take time... lpc

• Compaq Presario SR2010NX beep code error starting: longbeeppausecontinuinglongbeepspausebetweeneach

  Hello.  My Compaq Presario Desktop PC SR2010NX of 2006 began just not start.  It gives me a sound code of long beeps that accompany pause after each beep and continue indefinitely.  I have tried convenience cheques, and it looks as if it was the 'memory '.  My question, FEI's memory, what cards are hardware compatible with my PC.  I had a breakdown.    to install a new set of 2 GB cards in July - and I had technicians immediately reinstall my old 2 cards (issued factory) replacement cards they have advised me to buy are not compatible, and when I went to pick up my computer, the computer would not start.  I have askede to reinstall my old cards and the computer booted suceesfully, and I left the store!  I am sure that I do not know what new products could be compatible with my old PC.  I thhink 4 GB is too myuch for my computer, and he couldn't get half that - but what brand should be like new hardwrae?  I wasn't expecting my old cards fail when they were resettled - three months since the change of memory attempt - thre months they started normally.  They have been re-hurriedly harnessed and dismissed the case, and then I left the store.  (The tech threatedned me with fear of "motherboard failure", which just made get the computer and leave immediately.  The old cards cannot have been relocated safely.  I'm taking it - but I will not be pushed around.  Of course - as old as mine PC would gradually motherboard failure.  Until it fails.  It was the memory card, but what woud cards my PC take that would be accepted as new hardware and allow my PC to boot up normally, if it is the cards and not yet the motherboard?

  I have now read the post with indicator on the upgrade memory.  It was very useful, and I wrote notes for the Presario.

  It says, maximusmis 2 GB to 1 GB cards/no stamped with the form of the data of motherboard page.

  It is divided between 2 cards 512 MB factory.  It has only 2 slots.

  Thank you.  My Compaq desktop computer has grown on me.  I got Vista bfore and I didn't know what I think.  If it can be repaired, I think 8 years (purchase date 4 November 2006) were fun for the low-end model.  It was a good choice, and I have never regretted buying at what cost.  It was better than expected.

  I haven't used my Compaq Presario continually over the past eight years - that's why it lasted so long!  Dud ut do work, however.  I had retirement is put online last year

  I liked HP Photosmart first 6.5 photo editing.  I liked Wordpad.  Mechanically, it was scientifically.  The material began to go when the built-in CD/DVD internal drive has failed.  I bought and had a replacement (DVD player (cd) internal HP) installed in July 2014.

  The new internal DVD writer HP compatible service pack XP? I have SP2) - I don't think it's about compatible new material.  This caused unable to start new businesses after three months?  New feature of device recognistion and old motherboard? Don't know?  (short circuit)?  I left the old CD/DVD recorder factory in its case - it's there and the springs are working to open and close the casing and check it / A short?  Don't know anything about electric

  Another point, when the original memory card 512 MB on factory 2 cards have been resettled, he was press-technicians to get the computer to boot - so the computer's case has been closed.   (I took the PC on their part awqay as fast it was closed upward).  I thought safe in maintaining clips?  Maybe not securely harnessed.  Could also be from the old factory of 512 memory cards in each clip spare wedge - to alternate which card and which support clip.  I have not tried this or re-cutting to the place of repair.  (I do not have any technical installation and not have ny contact danger here - I do not touch the computer).  It is the matter of repair - these people in a hurry, they sell - they tell you something will work, they overtest, they overdiagnose - they push you autour-yyou never recover your computer to use as is - it is disturbing to go, if you are not a consumer savvy or technical.

  May not be able to take new material old = change motherboard in chipsets, etcs. features.

  Ialso had an error saying years only. IPC Port would not work.  (. COMI is the base model for the CPA called Palm Zire Hotsync Manager.  I don't think the Palm Zire software uninstalled iI, and the message is a (!) origin unknown error message is:. COMI, has failed to initialize.  It's a pop-up error message appeared during the startup process.  The repair people off the message.  The boot has been at once - disconnect - the plugin twice and electric start.  It was based on the plug in the socket, removed and reconnected before the start =.  Technicians tried to solve this problem, but it is not important from my point of view.  All of those, cumulatively, could be symptoms of a hardware change progressive until the end of the use of PC - they are all could be chips card mother falling out or something there (the CD player, the.) Port COMI - don't know about the real, even if start program - which can only be that.)

  I tried the power reset function discussed in the Troubleshooting Online Web pages - 5 seconds to reset, / 15 seconds to reset - power off (unplugged) and hold the power button / stop without plug-in for 5 or 15 seconds (depends on the Web page of the online manual!)  Once, after an attempt to reset of fifteen seconds, the computer has no beep, and he almost made a second rumble noise - but then no change afterwards.  The redonnee start-up sound code beep after that the computer was turned off and then restarted again.

  PC is sitting in his corner.  I don't want someone break while I think about what to do.  He's going nowhere right now.

  This is the first time, it would not start.  I am a bit worried and disappointed, but, I know that my PC is old, and one day, it will fail to work.  That is the reality.  If it fi fixable, I'm interested to hear about the fit-it.  Thanks again.

  Hello @lliil,

  I read what you posted and it seems that you have a hardware problem with your computer. The only thing I can do for you is to provide you with the HP support document: BIOS Beep Codes, which will help you to correctly identify what's wrong with your computer. Given the age of the computer apart from this if you want to know if it can be fixed, I recommend do you get into a local computer repair shop and let them take a look.

  I hope I helped. Thanks for posting on the HP Forums. Have a great day!

• HP Compaq D220 mobo POST, just beep codes...

  Well, it's really frusturating. I thought that I would have figured this out now. I turn on the motherboard, and I get 5 short beeps, a pause, then 5 more and so on...

  I tried Googling the model mobo (Lite-on NR138) and there is no record anywhere, I know it's old, but even the HP Compaq D220 page is void of any useful information. No specification page. And the 'upgrade and migration' page is a dead link.

  It would help me a lot to know what the beep codes mean, but it would be useful also to know if BIOS this motherboard only recognises
  some steppings, because I already tried 3 different processors. Two of them with B0 stepping and a C1 stepping.

  The first CPU I tried was SL68Q (1.8 Ghz, 512 K, 400 Mhz) there were 5 beeps.
  Then I tried SL6LC, with c1 stepping (2.0 Ghz, 128 K, 400 Mhz) it did not work at all, I don't even have the beep codes. (Not surprising, I think it's Fried).
  Finally, I tried SL66Q which is identical to the first (1.8 Ghz, 512 K, 400 Mhz) it has also resulted in 5 beeps.

  And Yes, I have excluded from the RAM, I tried 2 DIMM different (the two work in other systems). So I'm convinced it's a CPU problem.
  Any comments would be appreciated, especially if you have this mobo and have updated the CPU.

  ERICO, thanks for the suggestions.

  Problem solved!

  The RAM card was loose on one end, and after pressing it with all my strength, click on it. I was sure that it was not the RAM, because I had tried several cards, different slot machines even (but they never wanted to click). In this particular mobo slots are all that I've seen the difference. The grooves are short, so the modules look like they are sitting on the top of the Golden Groove contacts. It takes a lot of strength to their seat correctly.

  That this should be a lesson for me and others, that it is always a good idea to triple- check each strip memory and be very sure that they are not stirring, or tilted. The tabs on each side must click by themselves.

  The Council is an American Megatrends Inc. Model [FRIEND] NR-138. (No Fujitsu, or Lite-On). It is brand HP, but has an AMI BIOS, not Phoenix / Award. It recognizes the processors that I tested previously. He took AGP, Audio and LAN. The chipset is Intel 845GV.

  So in summary, five 5 short beeps of this Council is equal to "RAM not detected."

• Compaq presario beep and black screen

  Compaq presario sr5450 desktop stop with beep .the beepis on 17 seconds and off for 10 seconds. Ichanged power supplys but still the same beep and black screen

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  Here are the Codes of BIOS "beep" for an HP machine and the reasons why:

  "BIOS Beep Codes.

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c02222922&cc=us&destPage=document&LC=en&tmp_docname=c02222922

  See you soon.

• Compaq Presario CQ5504F at the start of the POST screen, then freezes, does not recognize the hard drive

  My Compaq Presario CQ5504F desktop computer (about 4 years) turns on, displays which I assume is a POST screen shows:

  As of the 2010 AMIBIOS Bios, Bios Rev. 6.08, 28/04/2010, CPU AMD Sempron 140 2.70 GHz 1024 KB ram Cache (L2)

  Installed memory: 3072 MB, installed USB controllers.

  Correctly displays "1 drive ST3500418AS" (seagate 500 GB SATA h/p) and "HP DDVDW TS-H653R" (optical drive)

  Tried a "HP Bootable Diagnostic CD - R' which took"PC-Doctor ".

  CPU Sempron tested and passed and 3072 MB of RAM and the HP DDVDW disc.

  Next: "Testing: path of the boot!" WARNING - BIOHD-2 error code.   WARNING: no hard drive detected ", followed by proposals to check the cables, etc.."

  Also shown: "NVIDEA Boot Agent 249.0542?

  I opened the system unit and disconnected - reconnected the two connectors on the h/d.  checked sound & vibration watch Variator is running.

  Also checked "Boot Device Priority:

  1 > [CD-ROM Group]-[HP DDVDW TS-H653R]

  2nd > [Hard Drive Group]-[not installed]?

  3rd > [group floppy]-[not installed]

  4th > [group of network boot]-[NVIDIA boot agent]

  Found a few useful tips on PC Help Forum, but advice required to enter the BIOS Setup, and I have not found a way to get into that.  Some of the function keys don't seem to work.  ????

  Would be very happy to suggest further repair attempts.

  VIC

  VIC, welcome to the forum.

  Normally, the BIOHD-2 error message indicates that the hard drive has failed.  Here's a guide to help you run the SMART for the reader of the BIOS test.  If you get a similar error message, you must replace the hard drive.  Also, here is a guide to help the recovery of the system once the drive has been replaced.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Which card wireless adapter for Compaq Presario model # SR5510F?

  I have a HP Compaq Presario model #SR5510F and I want to connect wireless to an AT & T 2-Cable Modem.  I need to know what wireless adapter card works for this model.  Thanks in advance.

  Message edited by morrow on 11/19/2009 05:54

  Which wireless standard using the ATT solution? Any spare wireless card should work fine, just for the game to the network.

  See you soon,.

• Equium A300D - beep codes BIOS POST

  Hi guys
  POST does not complete. Two big fat beeps. Someone at - it ideas?
  Thanks in advance
  Blakblayd

  Hello

  In most cases the BIOS beeps are the result of the problem of the motherboard.
  It is hard to say what role could be affected on the motherboard.
  But here is the page that provides some information on the BIOS beep codes:
  http://www.computerhope.com/beep.htm

  You don't have many options; what you can do is to test/remove the RAM.
  Maybe that RAM is defective otherwise it mother associated s pass and in this case the motherboard needs to be replaced.

• Compaq Presario CQ57: compaq Presario cq57 forgotten system password disabled code: 77564960

  Compaq Presario cq57 forgotten system password disabled code: 77564960

  At the password prompt, try 68442366

• Desktop Compaq Presario has beep and won't start

  My Compaq Presario desktop PC makes a sound beep and won't start. The SN # is CNX65112RS. Someone help me please!

  That's great. Please mark the thread as solved.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Beep code 1-1-1-1 from Presario V5094EA

  My Presario V5000 has renounced begin gradually.  Initially, I had problems with RAM occational market-code sound indicating.  The problem has gradually deteriorated and finally the laptop will not start.

  After cleaning contacts of the memory and the replacement of the RAM modules, the behavior has changed.  Without any RAM module I get the beep code 1-3-3-1, which is what I expected.  With no matter what memory RAM installed (including those who played upward in the first place), the cell phone rings now 1-1-1-1.

  I saw that with some BIOS HP this means 'failed flashing', but what this Presario?

  Where should I go from here?

  SamuelG wrote:

  At this point, I have only one problem left: I can not turn on the radio in the WLAN.  The module is correctly detected by Windows, which signals as working properly.  However, when I try to activate from the button in the LED Panel, nothing happens.  I visually inspected this Panel and measured all the lines in the water for the discontinuities, but found no fault.  Any ideas?

  After the upgrade to WLAN drivers with no effect, I installed the HP wireless assistant. He immediately spotted that the wireless is disabled in the BIOS.  After him it all works well.

  Although there is still no info available on the exact meaning of the beep code 1-1-1-1 (reason) why I entered the first HP support forum speculation took me on the road to replace the motherboard, that solved the problem.  The new motherboard also allowed me to 2 GB of RAM (of which one was not due to a previous error).

• How to start a Compaq Presario that will beep at me?

  I have a Compaq Presario desktop computer that I "inherited" a close two weeks ago. It has worked fine until this morning. After installation of new RAM sticks and get black screen ("We apologize for the inconvenience... ") twice, rechecked everything carefully and then get a blue screen telling me that"ati2dvag.dll"was responsible for the shutting down Windows, etc, it starts today!

  The fans start, so be able to do... but it comes is and keeps me beeper!

  It's a SR1619UK, running XP SP2 & Radeon Xpress 200 graphics chipset... and a 1 GB of RAM.

  Someone tell me what is happening?

  Life is what you make...
  *****************************
  You can only be sure of three things in life; birth, death, and taxes; Hah!

  Greetings, Dokie and Geekster.

  Sort problem! Given that I don't seem to be getting anywhere, I resorted to the suggestion of a friend of re-Foundation original RAM sticks (pair of 512s), and... It worked! (I told you I was new to this, and that I had not worked on your desktop before...)

  I must have disturbed them when I first tried installing the 1 GB module who came the other day. I never thought it possible... they are a VERY tight fit in these slots, and they need a little bit of pressure to engage the locks. but this is what must have happened.

  I'm willing to believe ANYTHING can happen with these gadgets now... !

  Thanks to the pair of you for your help with this... and it was more enjoyable to chat with you two. I know where to go for assistance in the future.

  Mike

• COMPAQ PRESARIO CQ61: Error ENTER PAST ADMINISTRATOR OR POWER ON PASSWORD password

  Recovery Bios Password COMPAQ PRESARIO CQ61 operating system: Microsoft Windows 10 (64 bit) Hello, I have a COMPAQ PRESARIO CQ61 and suddenly asks me the password of the bios. The message that appears is "ENTER password or POWER ON PASSWORD". What can I do? After failing 3 times I get the message "System disabled" and the code 59329588

  Please try-

  46081508

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the button white Thumbs Up on the right of say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP