AT & T phone transfer: no supported account type

Similar Questions

• Administrator account type changed from standard

  I have 2 on my pc to Setup user accounts - two of them have been "administrator."  They have now been changed to the standard.  That's happened?  Was it a Vista update that made that change?  I used the built-in Administrator account to log in and then tried to create a new administrator account or to change one of my other administrator accounts and it would not allow me to do.  What else can I do to have an administrator account.  If there is a Vista update that made the change - could you tell me what day it was.

  Thank you

  You said you tried the iin built administrator account - did you mean the account designated in this procedure: http://www.vistax64.com/tutorials/67567-administrator-account.html.  If this is not the case, try to use this procedure to create a new administrator account and see if it works (or use it to modify your current standard accounts administrator accounts and then return the administrator accounts.

  I have not heard of this problem before and if it causes an update, others here would be announcement of similar problems and I never saw any of these positions. Still, it could be caused by an update, but it is unclear what update caused it it you can't help remembering when the problem started and tell us what updates have been installed around this time by number of KB.  If you honestly think that it is a problem of Windows Update, then you should transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where experts in the updates wll be more that happy to help - but since you don't know when the problem started or what update or updates may be the cause It will be very difficult for them to provide recommendations (as it is here for us).

  Hare done you nothing recently requiring administrative rights so that we can determiine when accounts ceased to have administrator rights? Did you all any program?  You did changes in the control panel?  Did you install any new harware or drivers of devices?  NO MATTER WHAT?  You may not go back further than you think to do a restore point that could very well solve the problem if you remember when you did a single administrator can do.  System Restore does not affect your data at all.  You just need to re - install everything you have installed, including updates between now and the restore point.  If it'snly a week or two or even three there, which is probably not so much to do - you do not install several new programs are that often you (and Windows Update will be autormatically re - install the removed updates here so no effort on your part).

  Here is an article on the evolution of the types of user accounts (but you will need to log in as the built-in administrator for this to work since it can only be done by an administrator) and try the second and more advanced option and see if it works better than the normal method: http://www.vistax64.com/tutorials/122023-user-account-type.html.  While you are connected to the built-in Administrator account, try to do a few other features that require administrator rights to see if it actually has administrator rights itself as it should.  If you can not do all the administrative tasks with this account, then the problem is greater than it seems and we will have to refocuse on the problems of file system or hard drive corruption and we might need to do a re-install to repair/Upgrade from Vista to solve the problem.  Who can still be the case if you are unable to create admninstraror accounts or edit standard accounts to the same administrator accounts by using the built-in Administrator account

  We will try to test your system and hard drive for the corrupton files (and these procedures can sometimes resolve the corruption, but not always):

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator. If you are unable to do this, boot from the installation disc and select recovery and continue until you get to a screen of options, including the command line).  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a disc, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command line in the same directory, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  I hope this helps (and I am sorry if my first suggestion bother you so much - it is the most logical solution to this type of problem and works in many cases, not most of the cases - I wasn't aware of the circumstances that you revealed in your response, when I suggested it, but I think that it could still be a viable option if we can identify a reasonably recent time somehow). If this isn't the case, please post back the results of what you did and the results of the analysis that you have run and we can go from there.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hi our friend has an old e-mail address on his old phone and e-mail account is now closed he should drop his photos and has a new email address, how he retrieve it please

  Hi our friend has an old e-mail address on his old phone and e-mail account is now closed he should drop his photos and has a new email address, how he retrieve it please

  Even if the e-mail account is closed the Apple is still valid. If he has forgotten the password, see: If you forgot your Apple ID - Apple Support password

  What follows has instructions on how to change the e-mail address he serves his Apple ID: change your Apple - Apple Support ID

• New version of sync on two android phones transfer Favorites

  I unsync the two accounts downloaded latest version of sync to resync both phones still both phones transfer bookmarks and history

  Hi luckycat

  To help us to you, please provide the following detailed information on troubleshooting:

  1. What version of Android OS are you using (4.4 KitKat, JellyBean 4.1 - 3, etc.) on both devices
  2. What Android phone or Tablet do you use? Please provide the two model numbers.
  3. Please you have (means the next you upgraded to Firefox 36.0.1 for Android?) "transferred any new version of sync to both phones'), what you expected, it has happened that you have not already told us.

  See you soon!
  ... Roland

• I want to change my account type, STANDARD of Directors.

  original title: HELLO, IM VIC. What should I do with my Windows 7 Ultimate? I want to change my account type, STANDARD of Directors.

  Whenever I tried to change it as an administrator account I can't click the YES"" button.

  Hi Victor,

  What happened to your original administrator account?

  If you use a standard account to change the type of account, it is not possible. You must be logged in as an administrator to change the standard administrator account type.

  Reference:
  Change the type of user account

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You cannot change the account Type

  Hello:

  When displaying 'Select your new account type' I see the photo that I have assigned and to the right of the image, I see my log in name and under my name, I see "administrator."

  Standard user is the default bullet selected with the administrator being available option.  However, when I place the ball in the ball of the administrator below "change account Type" becomes gray.

  I won't be a standard user with standard user rights.  It comes to my computer at home and no one else is using the computer or lives with me.  So, my question is the following:

  What I do to activate the Administrator option?  And when I put the ball in the Administrator option I will then be able to "Change account Type".

  This computer and my laptop are both running the same operating system: Windows 7 Professional

  Your support and your help is appreciated.

  Thank you

  Eric

  Hi again:

  I am not connected as a Standard user.  I am logged in as administrator.

  That's what I told you at the beginning: you ARE connected under an administrator account, so you can not change your account type "Administrator".

  If you are unable to perform certain tasks, then this is because of the restrictions of UAC (User Account Control). Click Start, click Help, and then search for help on UAC. You can disable it if you want, at your own risk.

  P.S. Please do not change your past jobs as this would result in a very confusing thread.

• So apparently I have a support account without be signed upward again to a regular account?

  I just signed up for a support account make this issue, but I never finished registration for a main account.

  Yes, a lot of Web sites and services of Mozilla have completely separate accounts.

  What was your question?

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

• my phone is not supported sim.phone is i44s and serial number is C8 * T9Y

  my phone is not supported sim.phone is i44s and serial number is C8 * T9Y

  < personal information under the direction of the host >

  We will need more information to help you. What do you mean that your SIM card is not supported? You try to use another carrier card while you were initially? Your phone is unlocked to use a new SIM card? What is the error message you get, if any?

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Hello

  Trying to get my new ni9263 below is the steps:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev1/ao0","",-10,10,DAQmx_Val_Volts,)); NOR-USB 9263
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,"" SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, SAMPLE_SIZE));

  DAQmxErrChk (DAQmxCfgOutputBuffer (taskHandle, OUTPUT_BUFFER_SIZE));

  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,));

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Transferred_From_Buffer, EVERY_N_SAMPLES, 0, EveryNSamplesCallbackAO, NULL));
  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen);

  Then I do my writing code and start the task

  When I move my code in my application hangs when it comes to DAQmxRegisterEveryNSamplesEvent with the following error

  DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Status code :-200980

  Any idea?

  Greetings;

  When you're talking about an alternative, do you mean a sleeve of spare or chassis or an alternative in the code?

  If it's a matter of code, then you probably need to change your software architecture to adapt the capacity of the installation. In order to avoid to use the FIFO and so have the problem you are experiencing, you avoid needing to register for this event? A few examples on different architectures is on the following link:

  http://www.NI.com/white-paper/6999/en

  Kind regards

  Simon Perez

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• has been recently contacted by phone from a support centre for the virus

  original title: Virus support centre

  I seem to have viruses on my computer and was recently contacted by phone from a support centre with regard to helping us with them. They have declined to go on the websites ammyy.com and teamviewer.com, but my security system would not allow download. Someone at - he heard of these Web sites and it was a legitimate support service call? What should I do?

  His fake / a scam. Ignore them

• How can I run a program with win xp have a restricted user account type in the title of windows 2003 Server domain controller?

  Dear all,

  I have a windows 2003 server and I have a domain controlor.

  I have win xp use in this field, the account type for these users are not administrator users and restricted users.

  When I need to install a program in any of these workstations, I need to disconnect the user restucted and the journal as an administrator user.  When installation is finished, I can run this program from the administrator user but when I closing session and connection for users user restruct I can not run this program and an error.

  My question is: How can I use this program with the user of gods?

  Thank you

  You would be better that tag on your workstation
  Windows Server - how to configure the group policy in windows server 2003 to remove the start in the start menu to xp pro user Expert MowGreen Windows IT Pro - consumer safety