How to disable WiFi for Portege R830 + Port Replicator & external keyboard

Similar Questions

• Tecra Z40-A-176 - how to get support for high speed Port Replicator III?

  Hello

  a customer garage bougt some Tecra Z40 A 176 with high speed Port Replicator III. Unfortunally to either the displayport Port replicators is not working properly and I want to have the support so.

  What I found was the support for laptops page itself, but not for the port replicator.

  With regard to:
  Klaus

  I want to have the support so.

  What do you mean by support and what is the problem with the display port?

  If you have hardware problems, you can contact your dealer or contact the Toshiba authorized service provider that is available in your country.

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI?

  Hello

  How to disable AutoComplete for username and password on the page to connect ACS 5.3 GUI? I have watched with in the Administration of the system GUI pages for example Sessions and can't find how to turn it off.

  Y at - it a CLI command I can run?

  Thank you

  Stuart.

  Try to update to patch 5.3.0.40.7

  Resolved questions in ACS 5.3.0.40.7 rollup

  CSCub40498 : the password in ACS 5.3 field has enabled auto operation.

• Adapter for Portege R830

  Hello

  I have a Toshiba Portege R830 (P/N PT321U-04S019B).
  It's original AC adapter was lost a long time ago so I brought similar Chinese, who turns out be not good.

  Now, I want to buy the original. But I do not find his model. I remember only that his exit was 75W.
  Another point is that I've changed my cell phone 9-cell battery. Should I now more powerful adapter?

  Would you please tell me what I have to buy and is there a place where I can buy original Toshiba parts?

  Thank you!

  Hello

  I have the UK version with PT321E part number and it should be almost the same as your model and AC adapter / CC part number PA3714E-1AC3 (DC 19V 3. 42A). Use this adapter to sector part number and order for your R830 Portege.

  Google around a bit and I m you will find an online store where you can order.

• Need to install order for Portege R830-10 q WXP

  SOMEONE HAS THE ORDER OF INSTALLATION OF THE DRIVERS / SOFTWARE FOR WINDOWS XP FOR TOSHIBA PORTEGE R830-10 Q PLEASE?

  Hello

  I agree with Akuma. It is important that you install Service Pack 3 before you begin with the installation of the driver. New drivers are pre-tested only on XP SP3 I think and it contains many important updates.

  But may I ask why you want to have Windows XP? If you use Windows 7 Professional or higher, you can use the XP of Windows 7 virtualization for legacy applications. Windows XP is, in my view, the past

• How to disable NICs for Windows XP?

  Dear Madam:

  I have a desktop of Microsoft Windows XP Home Edition Version 2002 Service Pack 3.

  How to disable the network adapters in Windows XP?

  It's a very good idea to stop Windows XP to connect to Internet automatically due to the end of support for Windows XP?

  Please reply back soon.

  Thank you.

  First of all you could just pull the Ethernet cable if this is a wired adapter. Or remove details of the wireless network, if this is a wireless adapter.

  Some adapters may be disabled via the BIOS setup, in which case they won't be even visible by Windows as the available material. These adapters adapters "embarked", i.e. the Ethernet cable plugs into a socket on the motherboard I/o Panel not the socket on a separate component card snap.

  Expansion card can be deleted without problem after power off, unplug the power cord and anti-static precautions.

  Alternatively, you can...

  • Click Start
  • Click on run
  • Type ncpa.cpl, and then press ENTER.

  In the window that results, you can click with the right button on Ethernet adapters (wired or wireless) and then click on disable.

  Tricky

• How to disable authentication for telnet?

  I want to know how to disable the authentication of user Telnet access. Whenever we enter the command (telnet ip address) in the command prompt, it asks for authentication, I want to turn it off. For example:-If someone wants to access my PC after entering the command (telnet IP address) it should not ask for authentication. Please help me how to do this.

  Thank you

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• How to disable snapshots for a vmdk?

  I thought that I had asked this before and have the feeling that it is possible, but do not find the information now.

  I want to share a vmdk that I use for DATA of the virtual machines. The virtual machine that contains the vmdk DATA does not use / have snapshots, but I want to use snapshots in other virtual machines. I have create a new hard drive in each virtual machine, choose the vmdk existing DATA and select "share this virtual disk with the virtual machine that created it." However, when a snapshot is created in the other VM, it also creates a snapshot of the DATA vmdk. The problem is that if something is written on the vmdk DATABASE, then all the VM who have snapshots will report the DATA as being damaged vmdk.

  To work around this problem, I want to disable snapshots for the vmdk from DATA, but leave it turned on for all the other vmdk. Is there a setting to do this?

  OxkAMam wrote:

  How do you define a disc to independent mode?

  Add the following parameters to the configuration of the Virtual Machine's .vmx file, then that is closing, closed not suspended and VMware Fusion.

  The syntax is as follows however uses the one appropriate for your configuration.

  ide0:0.redo = ""
  ide0:0.mode = "independent-persistent"
  
  Or
  
  scsi0:0.redo = ""
  scsi0:0.mode = "independent-persistent"
  

• Will someone please tell me how to install drivers for Portege M100

  I have installed the toshiba M100_XP_common files

  1. I can't load the graphics drivers because they say that I do not have some files

  2. I can't load the audio drivers because they say that I need MS bus drivers

  Help please, what to do?

  I am running xp sp3, I would more XP KB

  Hey Buddy

  I guess you got the Win XP drivers for Portege M100 on the European driver Toshiba page.
  You will also find the installation instructions that shows you the right installation order!

  Yes, you must install drivers in the correct order.
  In addition, you will find the Intel and Intel Chip Set Utility display driver. These are the drivers required in your message!

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate

• Portege 3440CT Port Replicator

  I have reistalled the OS (Windows 2000)
  using drivers from the Toshiba site.
  As far as I know, everything works fine
  except the Network Port Replicator.
  I can't have the PC to find the
  Ethernet card and audio output
  Since the Replicator does not work either.
  Any drivers?

  How can I activate the network card?

  Grateful for the advice, Fredrik

  Hello

  I found some drivers for your device. Please visit this site:
  http://EU.computers.Toshiba-Europe.com
  In my opinion, you need the driver Lan (V4.1.65.0) and the audio driver (V5.12.01.2123)
  As far as I know you don t have enable the network adapter.
  If you you just need to install this driver.

  Good bye

• For Satellite C855 port replicator

  Hi guys,.
  Wondering if there is Port Replicator for C855?
  Thank you

  With your phone model, you can use external port replicator as Toshiba Dynadock.

  Has your laptop computer, connecting the port to the bottom?

• For Equium A60 port replicator

  I want to use a port for a laptop equium A60 Replicator can someone tell what must be used because I do not see a list for this laptop

  Hello

  Nick is quite right. It cannot be connected to the port replicator. All units that can be connected to the port replicator have expansion on the underside port.

  Good bye

• Portege M400: Port Replicator support DVI and analog monitor

  Hello

  I use my Toshiba M400 in the duplicator.
  The duplicator has two outputs to a DVI and an external analog output display.

  I would use both screens at the same time under Windows Vista RC1.
  The port replicator manual mentions that this should be possible depending on the connected computer.

  "According to the computer connected to the port replicator, you can connect external monitors to DVI port and the port external monitor and display on both screens at the same time."

  Someone he knows the M400 which supports? I only get the external DVI monitor or at work.
  (He used to work with my old others and this function was just great).

  A big thank you in advance.

  Rogier

  Hello

  I'm not sure but pretty sure you cannot connect two external displays at the same time due to the restriction of graphics card for laptop to 100%. You can stretch relative to your office for two screens (one internal and external) or have the same image on laptop LCD and external TFT connected DVI or RGB port.

  If I read the sentence you have posted I realized you can use two ports (according to specifications) and use two screens on the same time screens (laptop screen and an external).

  All available modes to switch the display to the external one, you can check with the combination of keys FN + F5 or in change of display tab tool mobile extension of Toshiba Service.