ATA or SATA?

Similar Questions

• DV6 - 6163cl: change of hard disk for laptop ide (ata) to Sata

  OK, I bought a hybrid of 1 TB HARD drive and it is a sata drive. I noticed that the 750 GB drive in my notebook is a disk Ide (ATA). How can I make the new sata drive works in this notebook? Or can I?

  Thank you.

  That's right, and your model may take a SATA III (6.0 GB/S) hard drive.

• Is my S X 201-3249-CTO-III (3.0) ATA or SATA II?

  The type is 3249-CTO. I have custimized on the lenovo site. I7 CPU, Seagate 500 GB 7200 RPM, 4 GB of DDR3 memory, Intel 6300 ultimate

  Is there a way to know if it is Sata II or Sata III?

  2 sata, sata 3 only became available on the X 220.

• Dell Optiplex 3040 MT - in the BIOS there is no option to select "ATA" for SATA Operation! (Impossible to deploy the Image system Windows 2008 Server in AHCI Mode)

  Dear Experts,

  I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
  In dell 3020 I deploy the image using ATA mode.
   
  Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.

  Thank you!

  Jesse There is no option in 3040 because the ATA mode is no longer supported.  F6 drivers are REQUIRED for windows 7, 8 or 10.   XP/VISTA is not supported at all and will not be installed.

  AHCI is the only option available in the modern Bios and chipsets.

  The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers

  https://Downloadcenter.Intel.com/download/25165/

  

• Need a replacement for my A40 Pro Sat HD

  Hello

  My hard drive is quickly giving up the ghost, and I need to buy a replacement for it.

  I backed up all my vital info and my cd XP Pro ready to install the new drive.

  However, I'm not sure which car to buy for reploace the one I have.

  Is there a difference between ATA and SATA drives as far as my laptop is concerned?

  I found a SATA drive not dear toshiba that I was hoping that I could use my laptop.

  Can someone advise me on this please.

  Thank you very much, George.

  http://www.ebuyer.com/product/137452

  Hi mate,

  Unfortunately, your machine is able to readers ATA (IDE) with the form factor of 2.5 "(inch)."

  What you need is a HARD drive with an IDE connector. Regarding the maximum size of the drive you want to install: the machine must be able to handle more than 100 GB since you have a PM 845 chipset installed.

  If you want to buy a new HARD drive, then remember the following things:

  1. you need a car with an IDE connector
  2 card should be 2.5 "
  3 limiting the size should be something more than 100 GB

  I can't really offer you some brands, but toshiba drives are really good. :)

  Welcome them

• SATA drive in older presario

  installed 500 GB sata drive in presario sr1265cl with card mother a7vbx - la.

  unrecognized disk, sata port is active on this system?

  do I need a new bios or anything just not compatible?

  I just checked the configuration BIOS F11 on my old Pavilion.On Advanced tab screens, all the way at the bottom of the screen is "Ide Configuration". Go in, and there is the possibility to change the controller P - ATA only P - ATA & S - ATA or SATA same only. Remember that I have not tried a SATA hard drive with these settings so untested Betacam, but he seen possible.

  Be careful with the S - ATA definition only because this will also affect CD/DVD drive.

  If changing the settings does still not work, idea of Hüffer PCI card would be my next choice. Thanks for reminding me of that!

• Documentation in conflict on IDE / ATA, who is he?

  Getting started with ESX, I read the following:

  http://pubs.vmware.com/vsphere-esx-4-1/getting_started/c_esx_hw.html:

  "ATA and IDE disks hard - ESX supports the installation and on an ATA or SATA RAID disk, but do ensure that your specific speed control is included in the hardware supported. IDE drives are supported for ESX installation and creation of VMFS. »

  And the Guide of the ESX Configuration, I read the following:

  http://pubs.vmware.com/vsphere-esx-4-1/server_config/c_local_storage.html:

  "Note: you cannot use drives IDE / ATA to store virtual machines."

  What is correct? Creation of a VMFS on an IDE drive / ATA means that you can store virtual machines on an IDE disk / ATA, correct?

  Thank you!

  The console ESX 4.x is actually a Virtual Machine, it is stored on a filesystem VMKFS. The Tunis should probably be amended to eliminate any confusion. Installation on IDE is not only being a good choice no mater what that.

• OSX 10.5 Leopard installation problem

  I tried to install OS x 10.5 Leopard on a new HDD in my door mirror, Power PC and OSX 10.5 Leopard installation disc is stuck in the installation screen, with the motionless progress bar and under saying "time remaining: calculating...» "on a new WD hard drive.  On some tests, he began to install and calculated 50 minutes before he hung up and arrested.  I also tried to use utilities to restore my time machine drive system, but that too hang up and will last all night by train to restore the system.

  I ran the test on the installation disc, and it shows that the disc is fine.  I tried this in several Power PC computers and 3 different new hard disks, with the same result.  I also tried to use Restore to try to clone my drive down to the new, but fails too once it begins and can run all night trying.  I installed the new RAM, made a Cuda reset and reset the Pram.

  In total annihilation, I also tried to install OSX Tiger with exactly the same result

  How can I get OS x on my computer as the operating hard drive that has been in the computer failed.

  What size is this player?

  What OS it has been formatted in & what the Format & Partition scheme?

  What is an ATA or SATA drive hooked to a SATA card?

• DC7700 SFF: ARE OK TIME MY PC?

  Hello.

  My PC fans were noisy as hell and gave me a hard time. So I used SpeedFan . I know it's kind of a utility pro user. but I watched a few videos and tweeked my speed with her fans a little bit and BAM, I could hear the beuatiful sound the most I have ever heard. I could hear the noise of the rotation of the hard drive.

  The RPM and the time before twist (watch the speed of the fans):

  

  What I did at the speed of the fan is the settings area of fan of "are more warm ambient remote 'remotely' auto' and the fans became leave:"

  

  This is my temp and my use of the RAM and CPU after 'tweak '.

  

  My questions are:

  1. Since the speed of ROTATION of the fan ignored avout (1827 RPM) the motherboard increased to 59/60 ° C, temperature is safe temp. I mean my mobo would be damaged or anything?
  2. When I try to play L4D or any game the CPU temp reach 58 C and the MOBO of 62 who scares the hell out of me; as I left the game. is this OK should I just keep playing?
  3. What do you suggest to me that I do?

  All I want to know is that these times are Ok!

  MY SPECS:

  Operating system
  Windows Pro 64-bit 10
  CENTRAL PROCESSING UNIT
  Intel Core 2 Duo E6300 1.86 GHz 41 ° C
  Conroe 65nm technology
  RAM
  2.00 GB Dual-Channel DDR2 @ 332 MHz (5-5-5-15)
  Motherboard
  Hewlett-Packard 0A54h (XU1 PROCESSOR) 50 ° C
  Graphics
  L1952HQ (1280x1024@75Hz)
  Chell Intel 1.8 b for Intel Q965/Q963 (HP)
  Storage
  74GB Western Digital WDC WD800JD-60LSA5 ATA Device (SATA) 41 ° C
  298 GB Seagate ST3320311CS ATA Device (SATA) 33 ° C
  Optical drives
  HUAWEI device of USB mass storage
  ATAPI DVD A DH16A1L ATA Device
  Audio
  Realtek High Definition Audio

  Speccy gives me always temperatures less than say the fan speed, HWINFO64, or OpenHardwareMonitor as I don't get it!

  Thank you.

  Hi there praised10

  The times seem reasonable and you should be OK.

  You should be able to find the technical details of each part and recommended operational temperature either in your PC manual or online.

  Mind that some settings on the fans of tweaking could cause problems if they are not configured properly to run top down when the temperature rises, for example because of the increased workload.

  If you hear an abnormal noise coming from your storage drives I would say checking them if they are healthy and performing correctly. You could do that with diagnostic manufacturers tools. For the WD drive that would be WD Data Lifeguard Diagnostics. Check if the player is quick and extensive tests.

  Let me know if you have any questions!

  Captain_WD.

• HDD upgrade on Satellite M70 (PSM71)

  Hi all

  After upgrading to 2 GB system memory, it was clear my HARD drive slow down the entire system with its noisy race. But looking at the list of "drives hard compatitable" doesn't bring much because there are all external solutions. So I searched and found a few hard drives internal seagate but I don't know if they are compatitable with Satellite M70. M70 does support ultra ATA or SATA?

  I have an external SATA HDD and can observe the difference in speed, clearly that's why I'm ready to upgrade the internal system HDD 5400 to 7200 RPM. As well, but I still don't know if M70 supports Sata or Ultra ATA drives. Need help at this point.

  Best regards

  Berk K.

  Momentus 7200.1 SATA 1.5 Gb/s 100 - GB hard drive
  Cache 8 MB
  Best laptop performance available for maximum productivity
  Superb reliability
  Rugged mobility
  Interface SATA 1.5 Gb/s card
  Low energy consumption
  5 year warranty

  Momentus 7200.1 Ultra ATA/100 80 GB HDD:
  Cache 8 MB
  Best laptop performance available for maximum productivity
  Superb reliability
  Rugged mobility
  Ultra ATA/100 interface
  Low energy consumption
  5 year warranty

  Notebook internal 2.5 inch Ultra ATA 100 GB hard drive
  Stores up to 1 665 hours of digital music, 32 000 digital photos, 100 hours of digital video or 50 exciting games
  Cache 8 MB
  Rotation speed of 7200 RPM
  Built-in self-monitoring technology continuously checks the performance and safety and data reader.
  Quiet and cool operation
  5 year warranty

  Hello

  To my knowledge, the Satellite M70 supports s HARD drive with SATA interface.
  I discovered that this HARD drive specifications are supported:
  Bus Master IDE
  9.5 m/m, 2.5 HDD support up to 100 GB
  Rotational speed 5400/4200
  SATA and ATA parallel

  The 7200 RPM hard disks are not listed, but I don t think that this could be a problem...

• M70-122: Linux can not find a HARD drive

  I have a problem with the hard drive in my M70-122. I whant to install the Linux operating system and when I try to install the Linux say 'NOT FIND HARD drive TO INSTALL OPERATING SYSTEM'
  I try with different distribution of Linux, but nothing.
  And I did not understad what is my HARD ATA or SATA drive.
  Thank you

  Hello

  This device was equipped with a SATA HDD. This might be a reason why it of not possible to install Linux. It takes the drivers before you continue to the installation of the OS.
  Unfortunately Toshiba doesn't support Linux and you will not be able to find the Linux drivers on the Toshiba site.

  Please also check the other postings on Linux and SATA
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9748&MessageID=34420#34420

• HP dc7800 Convertible Minitowers does not restart

  I recently bought a used HP dc7800 Convertible Minitowers. It works fine, but there is a question I leave me puzzled: whenever I restart the computer through Windows, it will not start correctly. Sometimes it shows the HP splash screen and goes just a black screen, and sometimes it shows the HP splash screen and restarts repeatedly. What is more strange is that shut down the computer and put on still work manually, and the computer will boot normally.

  System information:

  OS: Microsoft Windows 7 Ultimate 64 bit SP1

  CPU: Intel Core 2 Duo E6550 2.33 GHz

  RAM: 6.00 GB Dual - Channel DDR2 @ 398 MHz (6-6-6-18)

  Motherboard: Hewlett-Packard 0AACh (XU1 PROCESSOR)

  HARD drive: 149GB Western Digital WDC WD1600AAJS-60B4A0 ATA Device (SATA)

  I agree Rick, that may be the problem.

  I don't see any BIOS date of issue (look under Vista) have nothing to do with Bitlocker or or boot up/reboot issues.

  I don't have the latest BIOS installed 1.32 at the time.

  I bought the PC used on eBay and the seller had put W7 Ultimate 32 bit on it without loading the drivers, etc. and just shipped.  Nor have I received any key disk or installation products.

  I got such a lot of things on it and I didn't care what OS he had.

  I wasn't going to let on in any case, because my plans were max out of the memory of 8 GB and install my copy of W7 Pro x 64.

  In any case, I just tried but updated the BIOS to get W7 Ultimate to work normally (just to see if I could help all the other people who were stop and start loop question).

  Everything I tried was unsuccessful.  And the thing is, some people dc7700/dc7800 ran very well with W7 Ultimate.

  It was just a handful of us who could never make it work right.

  My suggestion you Cinos, must abandon all hope to get to work and install W7 Pro or home (if you do not need to connect to a domain).

  No one I know has reported to solve this issue.

• RAM and the satellite L20-100 HARD drive

  Hello!

  I have an old Satellite L20-100 and it has a few problems with the HARD disk. I want to buy a replacement (new HARD drive) so I need to know what are the types of FDI in L20 - 100 discs...

  In addition, what type of DDR2 RAM I should buy to install in this laptop?

  Don't want to buy a fake, because if I do, it would be very difficult to sell...

  Please, help :)
  Thank you.

  Post edited by: in_silent

  Hello

  I agree with Akuma L20 supports a SATA controller and you need and 2.5 SATA HDD.
  Usually it s no matter which manufacturer is all 2.5 SATA hard drives must be compatible

  With regard to the 48-bit LBA:
  As far as I know that this could be just a problem with HDD IDE (P - ATA). SATA HDD should not be affected. So, theoretically, you could upgrade the HARD disk using larger than 128 GB.

  Regarding the upgrade of memory:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM and you can use 2 x 1 GB RAM

• Equium A200-15I - replacement hard drive

  Hi guys,.

  I was wondering if you could help me, you want to replace the hard drive of my laptop (Toshiba Equium A200-15I). its 3-4 years old and just get some small and old.
  Is it easy to replace, is it just another wack in and load the disc vista reset factory settings or is it more complicated. Also what hard drive actually buy for my laptop are all made for computers laptops set or is the only difference ata / sata and the disc rotation. If those are the only differences, I realize after reading some of the messages that ata and sata can be mixed, but can I use any RPM or any size? also can you recommend me a couple or where to look to buy

  Cheers for any help
  Mark

  Specifications of base model so I don't waste your time looking for them incase you need

  Processor type: Intel® Pentium® Dual - Core Processor T2080
  Clock speed: 1.73 GHz
  Front Side Bus: 533 MHz
  level 2: 1 MB cache

  Windows® Vista® Edition operating system Home Premium

  Standard system memory: 2 048 (1 024 + 1 024) MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (667 MHz)

  Hard disk capacity: 160 GB
  Certification: S.M.A.R.T.
  disc rotation: 5 400 rpm

  Hello

  Before any replacement disk HARD is quite easy: there's a blanket of HARD drive on the underside of the laptop that you need to remove and then you are able to exchange the HARD drive.

  Theoretically, you can buy each 2.5 HARD drive SATA interface. On SATA interface, there is no limit of capacity for each HARD drive, you can buy. I would recommend a model 5,400 rpm. highest RPM is originally more than heat and need more battery power as well. 5,400 rpm seems to be a good choice.

  You can buy in every shop online, on eBay or at your favorite computer store. :)

• Pavilion n200 mod #15z laptop computer: HARD drive

  Thanks for reading.  My HARD drive went out on computer HP laptop pavilion of my model # is 15z n200 Q. My son is what type of HARD drive do I need ATA or SATA.     the laptop is not a HARD drive at all so without pulling and searching, I can't find any info.

  You are welcome

  Good luck!