ATG10.2 LogColorizer for Oracle Linux

Similar Questions

• Prerequisites for Oracle linux check failure

  Hi, we have a new Oracle linux box version 2.6.32 - 358.14.1.el6.x86_64. We are trying to install the Basic 11g 11.2.0.1 version. We have installed the RPM required and manually created groups of oracle.

  When you run the Setup program on the step "Perform due diligence", it shows failed on all aspects of the operating system to free up space on the packaging. The details are not conclusive because it returns N/A for expected value and the actual value.

  Is it because 11.2.0.3 is compatible with this version of linux 6.3?

  Kind regards

  Nick

  Yes - you probably won't be able to install the first place - even if you are successful, installation would be unstable and prone to problems and instability - without the supported Oracle

  If you and your development team are willing to live with an unstable and unsupported, there is nothing stopping you from ;-)

  HTH
  Srini

• VM Player 3: VM Oracle Linux 5 connection errors

  People,

  Hello. I am running Oracle Linux 5 VM Player 3. The host OS is Windows 7.

  3 VM and Oracle Linux player 5 worked properly for a long time. Today, it happens a strange error below:

  After starting Oracle Linux 5 VM Player 3, I type in user name and password to connect. It takes a few minutes abnormally. 6 mistakes then comes one by one below:

  1) an error occurred during the loading or saving of the configuration information for Nautilus. Some of your configuration settings may not work correctly.

  I click on the "Détails" button and the following message appears:

  Failed to contact configuration server; Among the possible causes are that you must enable TCP/IP for ORBit network features, or you have NFS locks defective due to a failure of the system.

  see http:// www.gnome.org/projects/gconf/ for more information.

  Details-

  1: IOR file "/ tmp/gconfd-user/locking/ior" No. successfully opened. No gcond located: no such file or directory.

  2: IOR file "/ tmp/gconfd-user/locking/ior" not open successfully, no location gconfd: no such file or directory.

  2) an error occurred during the loading or saving of the configuration information for the Power Manager. Some of your configuration settings may not work correctly.

  In the popup Window Power Manager, there is a yellow triangle with black!

  The message is: the GConf, schema Setup error battery_low_percentage cannot be zero.

  3) an error occurred during the loading or saving of the configuration information for print notifier. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  4) an error occurred during the loading or saving of the configuration information for gnome-settings-daemon. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  5) an error occurred during the loading or saving of the configuration of gnome-sessioninformation. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  6) there was an error at startup of GNOME Settings Daemon.

  Some things, such as themes, sounds or background settings can not work properly. The last error message was:

  Has not received a response. Possible causes include: the remote application has not sent a response. Blocked bus message security policy response. The response period expired, or the network connection was broken. GNOME will always try to restart the settings Daemon next time that you log on.

  After a few minutes, desktop screen becomes black background with all the icons on it.

  But no bar. I can't click anywhere to run.

  This is the first time for me to cope with such a strange mistake. I do not understand what causes this kind of errors.

  I checked VM > Settings > hard drive > capacity:

  Current size: 96.9 GB

  Free system: 41.7 GB (there is free space on the Windows 7 host drive)

  Maximum size: 100 GB

  I created the virtual hard disk for Oracle Linux 5 as 100 GB. The current size of 96.9 GB indicates 96.9 GB 100 GB has been used. So, 100 GB - GB 96.9 = 3.1 GB.

  My questions are:

  (1) how much free disk space is required to start the Oracle VM Linux 5?

  (2) what are the causes of the 6 mistakes when connect to Oracle Linux 5?

  (3) does "not enough disk space of vm" cause 6 mistakes when connecting Oracle Linux 5?

  (4) how to fix errors?

  Thanks in advance.

  Hello

  For the question on what is LVM see: Logical Volume Manager (Linux) - Wikipedia, the free encyclopedia

  For tips on how - to use LVM, please see this article:

  Linux Sysadmin: How to manage LVMs with a GUI

  Before you can add more space, you need to resize your virtual drive and make more great or you will need to add another virtual disk to the virtual machine.

  The/3 GB to use is only available for the root user as it is in the safety margin of 5%.

  If Linux, UI drag / move uses a temporary folder, then is under/tmp

  To find out where disk space is used, the commando of the can be used.

  Use the command "of the man" learn more about the options.

  for example.

  of the - SH/tmp

  will show how using the tmp folder.

  The - SH/home

  shows how much space takes the home folder

  etc...

  --

  Wil

• R12 Quick Installation on Suse Linux or Oracle Linux fails

  Hello

  I tried several combinations of operating systems to try and install correctly using the Oracle R12 / quick installation but I could not. My last attempt was on Suse Linux 10. When the installation wizard is complete, database checks are successful but HTTP server is unresponsive and all subsequent checks fail.

  The reading of google and the various threads on this forum, I found that for Oracle Linux, we must apply the patch that contains libdb.so.2. Since then, I do not have an account to support oracle, I cannot get this fix and based on rules, no body can send it in an email, which means that we can not install this distribution on Oracle Linux without having to pay for the supported. Since then, it is a learning exercise without the use of serious production of R12 apps, we do not have any arrangement with Oracle support.

  For Suse, I also have the same problem, but when I try to start the opmn manually using opmnctl beginning, she responds with message, began. But when I use opmn stopall, the computer stops responding. Now, I don't know yet how to start debugging this problem.

  I would give just to try to install it or there at - it a hope?

  Thank you.

  Hello

  I finally managed to install R12 on Suse Linux Enterprise 10 SP3. I decided to start again after a repair for the past two days. Here's the process:

  a. install Suse Enterprise 10 SP3 with office and all development packages offered in the facility.

  b. click the computer--> install the software--> search for the 'db1 '. It will give you two or more packages. Install db1_185xx (from Berkley). This provides a required libdb.so.2.

  c. then go through the installation as outlined in the instructions using rapidwiz.

  It fills correctly and I can see the login screen now.

  Now, I need to know how to put in place to automatically start all services after startup.

  Thank you for your help.

  Kind regards

  Sohail naima.

• Open Enterprise Manager using the browser on Oracle Linux

  I installed Oracle 10 g Release 2 on Oracle Enterprise (version of Enterprise Linux AS 4 (October 7 update)).
  
  I started the listener and enterprise manager using emctl start dbconsole command successfully.
  
  As I am new to linux, I don't know how to open the url EM Linux.
  
  What browser should I use (exact version that is compatible with the version of Enterprise Linux AS 4 (October update 7).) How do I install the browser and open enterprise manager using the browser.
  I don't even know if any browser is installed during the installation of linux. How can I check if any browser installed or not?

  No one can guess what you have installed or how you have configured your system or the installation of Oracle. The default browser for Oracle Linux 4 is Konqueror, which is not compatible with the MS Oracle dbconsole.

  You might want to try the following:

  Open a Terminal command prompt (System Applications/tools) and enter the following command:

  
  
  su - root
  
  cd /etc/yum.repos.d
  
  wget http://public-yum.oracle.com/public-yum-el4.repo
  
  yum -y install firefox
  
  

  To open a Firefox browser window, open the Web icon in the Menu, next to the Actions or the Applications/Internet or type firefox in an X 11 terminal window.

  The default URL for the dbconsole EM is:

  http://hostname_or_ip:5500 / em

• Oracle 10g on Oracle linux 6.2

  HELO
  
  I'm planing to install Oracle 10.2.0.1 on an Oracle Linux 6.2 64 bit hosted on VMWare workstation.
  
  I found places that describe Oracle linux installation process, but most of them are for linux Redhat 5 or company 5. The main resource I found for Oracle Linux 6 is here:
  
  http://www.Oracle-base.com/articles/Linux/OracleLinux6Installation.php
  
  But it's not specify Oracle database product package dependencies. The package dependencies are listed [and here | http://docs.oracle.com/cd/B28359_01/install.111/b32002/pre_install.htm#CIHFICFD], but even for linux Redhat 5 and the company 5.
  
  Is there an official documentation explaining the process of PRECAUTIONS, including dependencies, for version 6.2 of Oracle Linux?
  
  Thanks in advance!

  Salvation;

  1 there is no any oracle product approved for * version 6.x unix
  2. you must use * version 5.x unix

  See:

  Oracle database on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1]

  Respect of
  HELIOS

• Company Oracle Linux

  Hello
  I can't find documentation for Oracle Linux here:
  http://www.Oracle.com/technology/documentation/index.html
  
  Where can I find documents?
  
  What I should download from the following list to install oracle Linux?
  

  Enterprise Linux Release 5 Update 3 Media Pack for x86 (32 bit)
  
  Enterprise Linux Release 5 Update 2 Media Pack for x86 (32 bit)
  
  Enterprise Linux Release 5 Update 1 Media Pack for x86 (32 bit)
  
  Enterprise Linux Release 5 Media Pack for x86 (32 bit)
  
  Enterprise Linux Release 4 Update 8 Media Pack for x86 (32 bit)
  
  Enterprise Linux Release 4 Update 7 Media Pack for x86 (32 bit)
  
  Enterprise Linux Release 4 Update 6 Media Pack for x86 (32 bit)
  
  Enterprise Linux 4 Update 5 (New License) Media Pack for x86 (32 bit)
  
  Enterprise Linux 4 Update 5 Media Pack for x86 (32 bit)
  
  Enterprise Linux 4 Update 4 Media Pack for x86 (32 bit)
  
  Oracle Enterprise Linux Release 5 (Supplementary - RDS) Media Pack
  
  Oracle Enterprise Linux JeOS for Building Oracle VM templates for x86 (32 bit)
  
  Total: 13

  Thank you.

  There is no specific documentation of OEL, there are guides to installation for Linux x 86, and Linux x 86-64. Since you don't say WHAT you want to install (Oracle runs different products in different versions on Linux) no additional guidance is possible.
  More - at least for me - the docs still are declining.

  Werner

• How to install the web 32-bit server on Oracle Linux 7 (64 bit) for Siebel SWE?

  Hello community,

  I'm being a sandbox Siebel installation in a Virtualbox machine using Oracle Linux 7, Oracle DB 12 c and Siebel 15.5.

  I did very well for all installation process since it became a large number of Frank from previous versions.

  However, I still have a remaining item left which I have not been able to solve: Web server

  Originally, I installed 64 bit version of HTTP Server Oracle 11g of Web tier that filled well.

  However, after you apply the profile SWE logic, web server would fail start given that 32 libraries cannot be interpreted in 64-bit.

  Therefore, I tried to download 32 bit Web layer HTTP server only to find out that I could not even install using the linux32 command.

  Finally, I tried to build my own Apache server that required me to also build apr and apr-util libs.

  It was beautiful.

  [siebel@sbl-lab bin] $. / apachectl v

  Server version: Apache/2.4.17 (Unix)

  Built-in Server: 11 November 2015 00:41:35

  For the Server Module magic number: 20120211:51

  Server loaded: APR APR-UTIL 1.5.4 1.5.2

  Compiled using: APR APR-UTIL 1.5.4 1.5.2

  Architecture: 32-bit

  Server MPM: event

  thread: Yes (fixed thread count)

  forked: Yes (variable process count)

  Server compiled with...

  D APR_HAS_SENDFILE

  D APR_HAS_MMAP

  D - APR_HAVE_IPV6 (mapped IPv4 addresses enabled)

  D APR_USE_SYSVSEM_SERIALIZE

  D APR_USE_PTHREAD_SERIALIZE

  D SINGLE_LISTEN_UNSERIALIZED_ACCEPT

  D APR_HAS_OTHER_CHILD

  D AP_HAVE_RELIABLE_PIPED_LOGS

  D DYNAMIC_MODULE_LIMIT = 256

  D HTTPD_ROOT = "/ opt/siebel/apache".

  D SUEXEC_BIN = "/ opt/siebel/apache/bin/suexec".

  DEFAULT_PIDLOG = ' log/httpd.pid' d

  D DEFAULT_SCOREBOARD = "logs/apache_runtime_status".

  D DEFAULT_ERRORLOG = "logs/error_log".

  D AP_TYPES_CONFIG_FILE = "conf/mime.types"

  D - SERVER_CONFIG_FILE = conf/httpd.conf"

  However, once I started the web server after you apply the SWE, I received the following message:

  [siebel@sbl-lab bin] $. / startapa

  httpd: syntax on line 503 of /opt/siebel/apache/conf/httpd.conf error: structure of the API module 'swe_module' in the file /opt/siebel/apache/modules/libmod_swe.so is garbled - signature expected 41503234 but 41503232 - perhaps it is not an Apache DSO module, or has been compiled for a different version of Apache?

  I've been contemplating installing a chroot, a container or even another virtual machine exclusively for the web server.

  Before proceeding with additional measures that I might regret, could you please how you would proceed in this case?

  Thanks in advance

  Kind regards

  Alejandro Soto Laguas

  Nevermind, I checked certifications and Apache 2.2 should be used instead of Apache 2.4

  Everything is ok now.

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• Support of Oracle.  CPU for Oracle 10.2.0.4.0 platform 32 bit on Linux 32-bit

  Hi all

  I just wanted to know if oracle support the CPU patch for Oracle 10.2.0.4.0 platform 32 bit on the 32-bit linux platform.

  Any update on that highly is apprciated.

  Thanks in adavnce

  Then submit a Service request to get an official response.

  Nobody here can talk about Oracle Corp.

• Packages, patches, required RPM in Oracle Linux 6 for the installation of the EBS R12.

  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.
  
  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.
  
  Please guide.
  
  Thank you
  Patricia

  swapnil_yeole wrote:
  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.

  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.

  Please guide.

  Thank you
  Patricia

  All BONES and RPM packages can be found in these docs.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]

  "Rpm - qa" command to check if the package is installed or not.

  To install the packages, please use "yum install" or 'rpm - Uvh' command.

  Thank you
  Hussein

• Why Linux is preferred for Oracle

  Why Linux is preferred for Oracle?

  I helped clients running databases Oracle of small, medium and large scale (from 500 MB to 10 TB total segment size) on a variety of platforms Unix, Linux and Windows environments.

  The primary consideration for platform in 90% of these configurations is what works the best with the application solution / they run on their databases. I am passionate about Linux for small and deployments of medium sizes due to the following:

  1. relatively stable (no need to worry about the restart mentioned scenario earlier)
  2 takes in charge virtually all Oracle database architectures you might need (CCR, single instance, warehouse, etc.)
  3. support of OS relatively cheap (especially if you go with Oracles OEL), own can operate on mid-range servers
  4. allows you to stuff more "fancy" like virtualization of servers, clustering OS filesystems in cluster, integration in Windows domains, etc if you need competent of your availability/recovery solutions data disaster.

  Of course, all this assumes there been no egregious mistake you make when you configure the server ;) This is usually the point 3 which marks better with it management, but it may be a learning curve important for companies that might be more familiar with the Microsoft platforms, for example.

  Personally, RHEL or OEL is my platform of choice for small to medium deployments that don't have no platform restrictions, as well as to run software such as Oracle Grid Control (and soon Cloud Control)

  But really, the question of the preference really depends on what you need your database to / support.

• Need to Patch ID for Oracle DB Ent Edition 11.1.0.7 on Linux x 86-64

  Hi all
  
  Anyone happen to know the id of the patch for Oracle DB Ent edition 11.1.0.7 on Linux x 86-64 on the Oracle support site?

  Hello

  It's the 6890831 ID of patch.

  Best regards
  Jean Valentine

• SUSE linux is the best for Oracle 9i or not

  Hi all
  
  I want to know if linux SUSE for ORacle 9i is better or not. My boss wants to migrate our course Oracle 9i on Solaris 8 with Suse Linux storage without stroage.
  
  Will be the suse linux is good for oracle 9i and
  
  Is it true that it will support SUSE linux Oracle within 6 months...
  
  
  Please let me know...

  Click on the link in my last post, each operating system is listed.

  Nicolas.