Ports of Tecra 8200 - how fast is USB 1.1 or 2?

Similar Questions

• Tecra 8200: How to get the WPA encryption?

  How can I get wpa running on my tecra 8200. I installed Windows XP SP2, but it still doesn't work.

  Where can I download an update of the firmware of WLAN card because it's my last hope...

  Hello

  It depends on the properties of material WLan if you use WPA encryption option.
  You cannot enable this feature by updating the BIOS or the installation of SP2.
  As far as I know, this wireless network card supports only WEP, but not a WPA encryption.

• Tecra 740CDT - how to add USB?

  Hello Toshiba-Experts. I had a Tecra 740CDT and want to add a card PCMCIA USB under Windows 98 SE.
  Its a 32 bit card. But when the driver is installed the blocking of the system...
  How can I add USB on my laptop? Or is there perhaps another way?
  Thanks for the info & sorry for my bad English :-)
  MICHAPREETZ

  Hi micha

  Please check the BIOS settings. I don't know, but there must be an option called Cardbus select or something like that. I think that there are 32-bit option that you can select.

  Good luck!

• Can I update my BIOS using a stick USB Mem on Tecra 8200

  I want to update BIOS for the last level v1.6.
  I don't have a floppy drive selectabay, just a DVD player.
  Now, it would take 3 DVD to do this I assume IE duty in the order of the day for more BIOS later.,.
  v1.4 then 1.5V and finally v1.6.

  Is the Board of Directors supported the start-up of a stick USB Mem, or a USB FDD.
  Any thoughts on the best way to do it.

  Is there a utility I could download and do it from windows...

  My system is a 820E. Tecra 8200 series.

  Thank you.

  I doubt that you can not do this.

  Toshiba page offers a trad BIOS update that can be updated by using only the FDD drive.

  Please check this update of the BIOS Toshiba how to document:
  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  Concerning

• Usb PCMCIA controller does not work with Tecra 8200

  Hello

  I have an old laptop TECRA 8200 (Intel Pentium III, 847 MHz, 512 MB of RAM) OS: WIN XP with the latest patches. Because there is no USB 2.0 I bought a PCMCIA USB Controller (NEC Chip). The controller acknowledged, but XP is asking for a driver. The controller has not been delivered with a driver.

  Does anyone has an idea how I could get the operational controller.

  Thank you

  concerning

  Fred

  I mean, independent because this isn't really a toshiba associated problem, could you please put the name of the PCMCIA USB device?
  I mean the manufacturer or something because if XP asks you a driver there should be one available, or?

  Please, give feedback and what you could also do is to google for the PCMCIA device. The best way is often looking for the chip (in your case, NEC).

  Concerning

• Tecra M11-134 - Windows 7 USB ports problems

  I have three USB ports, that which is a SATA port.

  SATA port stopped working earlier, but I reinstalled it, after what it worked again.

  One of the USB ports however stopped working earlier, and am now unsure as to if this particular port doesn't show even in Device Manager (I see two entries "Generic USB Hubs", two "USB host controllers", a "USB unit (composed)" and two "USB root hubs"), but who is refers to the regular USB ports and that the SATA port?

  One of these entries in the USB port which does not or does not show this port?

  In any case, I can't get one of the ports to work even after reinstalling all USB ports.
  Can anyone help?

  I hope that someone with the same machine will describe the own experience with this, but what I want to know is follow:
  Have you tried to reinstall original Win7 32-bit professional and test functionality with the factory settings?
  >... even after reinstalling all USB ports
  Out of curiosity, but how you did it? Have you reinstalled the chipset driver?

• How to change the resolution on my Tecra 8200?

  I have a Tecra 8200 laptop, but without any of the original entry with this portable CD system.
  I installed Windows XP and you want to change the display resolution of 1400 x something to 1024 x 768, but after that, I have these black stripes, like a frame around the image.
  How can I put this in place? I can't find a keyboard shortcut!

  Second question: I have the problem that the screen is very dark ductless battery charger. I know I should use the power management standby, but I should install Toshiba other programs before installing the Power-Saver tool?

  I hope that there is someone who can help me and understand my English!

  Thank you

  Hello

  I found some info that Tecra 8200 comes with two different screens:
  1024 x 768 pixel TFT color display and
  Color TFT 1400 x 1050 pixels display.

  I assume you have the other. If you are using a resolution more low you can't wait for the perfect illustration and please use the native resolution. Please use the correct driver and you can find it on the Toshiba support page.

  Robin's right. Before you install Power saver utility install common modules first. Saving settings using, you will be able to adjust the brightness of the display to the maximum level.

• No sound from Port Replicator NetDock after installing XP on Tecra 8200

  After a recent accident, I re-installed my 8200 using XP SP2. Now I have no sound from the Netdock. All other functions of the DS seem to be OK.
  I downloaded the latest drivers Yamaha for XP SP2, but still no sound.

  I get no option to change analog output on the control panel of Yamaha. Device Manager lists system Yamaha DS + XG Legacy Sound (WDM) and Yamaha DS - XG PCI Audio Codec (WDM) as well as other codecs, gane and multimedia control device port.

  I want to get her back through the Netdock.

  Thank you

  Pete

  [Edited by: admin August 10 05 19:30]

  Hello Pete

  One of my friends has a Tecra 8200 running Windows XP Home edition, but SP1and everything works correctly. I really don' t understand why the its doesn't work.

  Sorry, but this unit is not supported for Windows XP Home edition, and it is not easy to say why the Board its doesn't work properly. If all goes well, another forum user has more experience.

  Good luck!

• Tecra 8200 to format HARD drive - how to install windows?

  Hello

  I bought a Tecra 8200 used with a formatted hard drive, when I put the original cd of Windows 2000 in the cd player, nothing happens, how do I get Windows installed?

  When I turn on the power, he said something about the dos mode and then it displays the date and time and after that nothing happens.

  I hope someone can help me!

  Thank you!

  Hello

  It seems that the machine can boot from the cd rom t.
  Please check in the BIOS if the CD rom is recognized.
  Also if you have installed the original W2k OS of this device it of necessary to install driver in the following order:

  Driver Chipset
  Video driver
  Audio driver
  Common modules
  Energy-saving
  Toshiba Utilities
  Mobile extensions
  Internal Modem driver
  Infrared driver
  The mouse driver
  LAN driver
  Wireless LAN driver
  Toshiba Client Manager
  Toshiba network device switch
  Microsoft updates / QFE
  Extended IDE controller driver

  Good bye

• How init a usb port

  Hello

  How int a usb port of the CVI.

  Hi FibilA,

  I guess you're wondering on how to initialize and communicate with a device USB of Labwindows/CVI.  If so, you will need the driver NI-VISA, and you should be able to consult these two items to start and to communicate with your device:

  Third-party USB or devices using FireWire with LabVIEW or LabWindows/CVI:

  http://digital.NI.com/public.nsf/allkb/42B604435E3F9604862565E20043CD30

  Control tutorial USB Instrument:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

• HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  HP 6470 b 2nd hard drive upgrade. How fast this port works on? SATA I, II or III

  I want to put in a 60 GB SSD into the CD slot and want to see how fast it will support as this will be used for the Cache

  Thank you

  The published information is not explicit; He says only: SATA for the expansion Bay while the main hard drive Bay expressly says SATA-III. However, given that this isn't just an optical drive Bay, but also a general 'Bay expansion', it is safe to assume it of on the same SATA bus as main drive and is a SATA III interface.

  Data sheet

  6470b is also supposed to have a slot for a WSSD mSATA, but he is not described in the Manual:

  Manual

  Obviously the WSSD would work better for cache but you can use a 60 gig SSD in an expansion bay for both cache adapter. Even if the connection is SATA-II, it will be much faster to work for a cache of acceleration.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Tecra 8200 Boot and install os!

  I have a tecra 8200, cd player no longer works, so I bought a new... The floppy driver has also been broken, but I just bought a new floppy driver external usb. Everything works fine on windows, but I want to reinstall my OS, but I can't boot from the external floppy drive or a cd player... How can I solve this problem? I edited my bios to boot from the floppy drive, cdrom and HDD, but it does not start, the cd is bootable etc... How can I solve this?

  Hey,.

  When you have changed the former in an ew reader, what was the same model or a better? As SD-R2002 or
  DVD PA3014E-1DVD player Kit
  PA3015U-1CDD 24 x CD-ROM Drive Kit II
  PA3068U - 1 CD 1 CD-R/RW Drive Kit
  PA3073E - 1 CD 2 CD-RW/DVD-ROM Drive Kit

  These disk are supported by the Tecra 8200 series. Another Selcet Bay drive can also adapt!

  It can also help to do a BIOS update unless the old one was not installed!

  Goodbye, TOK

• Tecra 8200 - what computer laptop model number should I?

  All top
  Can someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is.

  I have the following information on the basis of the machine:

  TOSIBA Tecra 8200
  Model No.: PT820E-05WQT-E
  Serial No.: 61276516 G ST820-0

  It is a Pentium 3 machine, but is - this one: has / M / R / S series? So what model to choose after that please?

  Thank you.

  Your Tecra is simply Tecra 8200 and there is no other model number.
  Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.

  You will then find option for Tecra 8200.

  Good luck!

• WiFi on Tecra 8200 after installing XP SP2

  I am running XP service pack 2 on a Tecra 8200.
  The problem is that the wireless card cannot detect any wireless router.
  I use a belkin G wireless router and it works, checked with another pc with a wireless card.

  However the toshiba wireless client shows no wireless network, the router or another computer.

  I have the antenna turn on and how to configure a wireless connection.

  I tried the old drivers and tried a number of drivers out of this site and others.

  But I had still not everything yet, does anyone else have this problem or a solution to this problem

  Hello

  If you use a client for a WLAN connection WLAN Windows settings SHOULD be disabled. Please check under properties network connection Wireless wireless networks tab.

  There is an option called use Windows to configure my wireless network. This option SHOULD be disabled (without hook).

  Good bye

• Control the brightness of the LCD on Tecra 8200

  My Tecra 8200 PT820E, at some point, has been formatted less Tosh. control software. Book of hand says go to the Panel control/power economy and alter the screen brightness it. Which does not exist on my machine.

  The problem is when on battery, brightness level falls to a level that is unreadable. Is there another way to increase the brightness level?

  Thank you.

  You can do this very easily using FN + F7 to raise the brightness level.
  And I think that it is supposed to be the Toshiba Power Saver to look for this option.

  This small utility can manage the behavior of the energy saving modes, and there is an option how display is obscured.