Atheros AR5001X PU3298U WLan works with Satellite 5100 503

Similar Questions

• MiniPCI Wifi card work with Satellite A200-1V0?

  Wifi miniPCI card works with Satellite A200-1V0?
  Specifically the Intel Pro/Wireless 3945 ABG Mini PC will work with this laptop?

  See you soon,.

  Prashant

  Hello

  To my knowledge the laptop supports dual-band built-in antenna and it was a 802.11(b/g) 13ch-minPCI WLan RTL8187B Realtek card.

  The replacement of WLan should be possible, but it s very delicate because whole books must be disassembled to gain access to the WLan module

  This can be done by a technician of the ASP.

  But why you want to replace the WLan?

• Is - Windows 7 works with Satellite M70 129

  Hi all

  How are you guys?
  wanted to ask you if Windows 7 works with Satellite M70-129 or not?
  Toshiba is going to support or not with drivers and other things?

  Thanks in advance

  This is a user to use the forum, so if you wait for an official statement from Toshiba then you can wait until you get gray hair
  If you want to hear my opinion then this is

  Windows 7 is very similar / same as MS Vista OS. It supports only a few additional features and options.

  In the European Toshiba page driver I found the Vista drivers for this laptop M70 series and I guess these drivers could be used on Windows 7 too.

  Good bye

• Driver update for Satellite 5100 503 with NVIDIA geforce4 440 Go

  Hello there,
  It is a German call...
  I need an update of the graphics driver to a computer laptop toshiba satellite 5100 503, the nvidia geforce4 440 Go, that you can't get on the nvidia site, where have no mobile system to get.
  My laptop is quite slow. I want just to speed up its performance.
  Thank you outthere

  This old laptop model is certainly not longer supported and you do not find an update on the Toshiba support page. What you can do is to look around to find the laptop with the same graphics card, but maybe with newer driver and try to install it.

  Can you please tell us why you need more graphics performance? For games?

• Help! Satellite 5100 - 503 has stopped working!

  Hello!
  I have a Satellite 5100 503 and was really satisfied until yesterday.
  Now it has stopped working.
  What I did: closed the laptop after work (everything is ok) and it only stems for a while. When I opened the laptop again to continue working, nothing happened.
  Only the small frontdisplay showed me a spinning CD (no CD inserted) and battery light. After pressing the button on the sur-signe appeared, but nothing happened again. By pressing the button again (a few seconds), do go away on-sign. No display, no fan, no noise of hard disk in any case (ono/stop). Insert an audio CD and works by pessing the play button! Soundsystem works well.

  Does anyone have an idea what could be the problem?
  questions? more info needed? Thanks for asking!

  Help, please
  Günther

  Hello Guenther,

  have you tried to remove the battery for about 5 to 10 minutes! It seems that the laptop is unable to start the file hibernation to start windows. You can also try to push the button to start for 5 seconds.

  Theo Cu

• Satellite 5100 503: unable to boot from the CD drive

  Hey all,.

  I have a HUGE problem with my 5100-503 Satellite.

  Windows XP connects and then it disconnects right away.

  I found a fix for this at: [url] http://www.mcse.ms/message616432.html {/ url}

  The problem is that I can not boot from a cd, because the BIOS is configured to boot from the hard drive first.

  I get into the BIOS. I read on a few websites on the net than on machines 5xxx Satellite, you can only enter the bios through windows! ..., BUT windows does not work so I can't enter the bios. I can't even use the Windows installation CD when I boot, because once again the HD is set to boot first.

  When I press ESC while turning on the laptop and then press F1, I have the option load default BIOS values. I did, but the HD is still set to start first!

  What I can do... I can't reinstall windows or get into regedit to fix the paper / log problem!

  Help!

  Hi Jamie,

  Normally, you can select a boot device selection menu when you turn on your laptop. You can do this by holding down the F12 key when you turn on. Hold it down until the phone beeps or the device selection menu appears.

  If this does not work then you can try the shortened Toshiba habit that is to hold the 'C' button in the power that would then cause the laptop to boot from the CD drive. Of course, there must be a bootable CD inserted first.

  Kind regards

• Need suggestion about the optical drive for Satellite 5100 503

  Hello
  I have a little trouble with CD-RW/DVD for Toshiba Satellite 5100 503 drive. He writes about 1/5 CD - r and only if I write< 400mb="" of="" data.="" i="" tried="" cleaning="" the="" lens="" -="" no="" help.="" tried="" both="" win="" xp="" writing="" software="" and="" nero="" -="" no="">
  Do you know if I can replace the drive for a DVD burner? And if yes - which model?

  Hi Piotr,

  You can replace your new CD burner with vurtually any DVD burner that is the same physical size, but you should make sure that the new Recorder has a set-up similar to your current drive configuration.

  In general, the reader will be configured as Master, Slave and Cable Select (Csel), by the manufacturer and must match the configuration of your current player. One of the tools of Nero will show you the current drive configuration.

  Unfortunately, most retailers do not show configuration and with slim-line readers, there is no DIP switch that allows you to change it.

  Kind regards

• Problems of restoration Satellite 5100 503

  Hi all
  I have a Toshiba Satellite 5100 503, and its hard drive has malfunctiond, so I had to replace it with a new, but now I can't use the restore CD I got with the computer.
  Could someone help me with this?
  Thanks in advance.

  > but continues to load windows
  How laptop computer can load windows if the new HARD drive is not contains a BONE?
  Or have you installed the Win operating system on any other way?

  To me, it seems that the laptop does not start on the recovery CD.
  The drive cannot read recovery CD because of the fault of CD or disk failure.

  Have you checked whether it of possible to boot from another bootable CD s?

  Tip: try to set the BIOS default and safe settings. Then turn on the laptop and press F12 immediately after starting the laptop. The start menu should appear and you should be able to choose the CD as a boot device.

• Satellite 5100 503: engraving of a 800 MB CD

  Hello

  Maximum capacity of a CD in the drive DVD/CD of the Satellite 5100 503 combo seems to be 703 MB. Is there a solution to burn CD 800 Mb / 90 minutes?

  Thank you

  Hello

  you want to burn a CD 800MB real or you want to overwrite it?

  Did you check whether a new firmware is available?

  What OS and burning program are you using?

  Goodbye, Sam

• Troubleshoot the Bluetooth Manager on Satellite 5100 503

  After update the latest driver bluetooth (version 3 July 2005), the bluetooth Manager will not start at all: a saying "TosBtMne.exe has encountered a problem and needs to close" error message, and no bluetooth services are available.
  Uninstalling this version of the driver and reinstall version 2 did not help - the problem remains.

  Hello ehudor

  Sorry, but I must ask you something. As much as I know Satellite 5100 503 has no Bluetooth. This device is just ready Bluetooth and. Have you built later in the Bluetooth card?

• This external modem will work with Satellite L500-1XL, running Windows 7

  Hello

  When in Spain, I need to use the dialing up to the internet through Telefónica.
  I guess that the L500-1XL is not an internal modem?

  This external modem will work with the L500-1XL running Windows 7?

  Thank you very much in advance for your help.

  A

  Hello

  You re right Satellite L500 doesn t have an internal modem, so you need an external.

  I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

  A friend got good experience with USRobotics 56K modem like this:
  [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

• HYB39S256800T-8A module works with Satellite Pro 4300

  I can buy this SODIMM Infineon HYB39S256800T-8A, and I heard that they only work with Toshiba laptops.

  They have been tested with Tecra 9000 and no problem, and with no computers Toshiba there are any errors.

  I have Satellite Pro 4300, they will work with it?

  Maybe someone a piece of support for a Toshiba for this memory.
  I asked Infineon, that they do not have the specifications for answering my question.

  Thanks for any help.
  Winyl

  You will be very happy if someone has the same laptop model and quite the same module of RAM. Buy and test it with your laptop. If it won't work not return. End of the story.

  The person who wants to sell you this RAM should be able to give a list of compatible laptop models. In any case, I recommend you to use compatible Toshiba or RAM Kingston modules. Both are tested and you'll get a high quality product.

• What card Firewire works with Satellite L40-139?

  I have Satellite L40-139 under Vista Home Premium.
  The laptop doesn't have a Firewire interface. He has a 54mm Express card slot. I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs.

  Although there are a lot of these cards on the market, there are also many stories of them does not not with Vista or some Toshiba laptops.

  Can someone advise please a card that is known to work with the L-series and with Vista?

  Thank you in advance.

  Hello

  > I would like to add a Firewire interface, so I can import video from a camcorder. If I understand correctly, it should be possible to install an Express card (34mm or 54mm will fit) which will provide the Firewire inputs

  This is right.
  Satellite L40-139 supports ExpressCard location and so you can use an Express which has been equipped with a firewire interface card.

  You should google a bit, there are a lot of offers on the internet

  For example something like this:
  [Express Card + Firewire ports | http://ecx.images-amazon.com/images/I/31%2BkULZc2gL._SS500_.jpg]

  See you soon

• Port replicator does not work with Satellite P100-160 & Vista

  I just bought a Toshiba duplicator (part number: PX1173U-1PRP) but it does not work with the o/s Vista pre-installed on my P100-160. Can someone tell me where to find the Vista drivers for this device?

  It seems that the standard driver is not compatible with Vista and so you will need a new from the Toshiba page.
  You must remove the old driver and then install the new version.

  Good luck

• Usb 2.0 PCMCIA on my Satellite 5100 503 problem

  I have a 5100-503 Satellite laptop, now I bought a PCMCIA USB 2.0 for a 60 GB external hard drive. The problem is that:
  a key memory work correctly with the pcmcia card
  drive hard work slow but with usb 1.1
  hard drive is not recognized by the pcmcia card

  Could someone help me?

  Hello

  I also use card PCMCIA USB 2.0 (scanner) in my old machine and I have no problem. As said Rudi it may be the problem of the map you are using.

  I don't know, but there may be a power supply for external HARD disk problem. I also have a strange problem. I use two external hard drives. One is 30 GB and 60 GB one another. If I connect them on my old 30 GB HDD just Satellite 1900 works well. I suspect that the cotyledon need more energy.