No sound after conversion of the wtv dvr - ms files

Similar Questions

• All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  I run FrameMaker unstructured 12 and FrameMaker 11 (for use with only the heritage project files) on a Win7 PC. The chapters in my FM11 file book for guide increment a new product user normally in FM11, but something bad, after you save the formatted FM 12 FM 11 project files.
  The book file includes:
  -Product Guide Cover.fm
  -Product GuideTOC.fm
  -Product GuideLOF.fm (list of Figures)
  -Product GuideLOT.fm (list of Tables)
  -Product GuideContent.fm (chapters 1-10) - book files dialing properties: Chapter 1 (digital)
  -Product GuideIX.fm (Index) (Chapter 11) - book files dialing properties: Chapter 2 (digital)
  
  Note: The chapter headings (e.g. 1 - Introduction, 2 - Specifications and so on) in the product GuideContent.fm and GuideIX.fm files are in the format paragraph Designer like: (the Auto-Numbering Format enabled) H: < n + > \t
  However, when I update the book, the Index seems formatted as Chapter 1 instead of Chapter 11. It seems that the conversion to FM 12 messed autodial in the product file GuideIX.fm, so that the only way to increment the value would be to manually update the building blocks in the file to H: IX.fm \t H: < n + > < n = 11 > \t (which I do not). Any suggestions would be greatly appreciated!

  Thank you - Randall basin

  Hi Ran,

  It's for anyone finding the subject, given that you and I come to chat with a screen sharing...

  After watching your files, the "chapter number" are really only section numbers, with all 10 of them in the same file FM. That means that really impossible to use the <$chapnum>for many of them and the index.

  In most cases, you would be still able to use the Fm 5.0 manually counting technique paragraphs title with an indicator of the series and the counter (e.g. H:), but you also have a number of positions within blocks of text not included in the stream.

  This seems to be your address update index position correctly.

  So, the only way to get the appropriate index number is to control it manually. You have at least 3 choices:

  1. Enter it manually
  2. Manually enter the AutoNumber box for the index
  3. Enter it manually in the numbering section of the dialing properties tab.

  However, all these things are extra bandages on top of your existing bandages, and I prefer to see the problems resolved instead of the 3 'Hacks' I have provided.

  For the sake of closure, please check the question if this seems to be specific for you.

  Sorry for the bad news (ish)!

  -Matt

• Error after conversion or the copy of the label

  Not to mention that nodes of "cloned" property that disappears, seemingly solved in Labview 2012 (SP1), I have also a problem with the bewilderment of labels after conversions or copying.

  The problem occurs at least in the following situation:

  1. There is a property of a control node.

  2. the control is defined in a 'Type Def'.

  3. a label is attached on the right of the property node.

  4. the location of the label in the 'Type' Def is different (top-left, for example).

  5. to create the bug or the source is converted (for example Labview 2011 2012 Labview) or the property node is copied between sources.

  6. the label of the node property converted/copied now has moved to the top, above the property node.

  In Labview 2012 the solution for "cloned" property disappears nodes fixes also bug of bewilderment label for nodes of property.

  Moving labels can be quite annoying when you have relatively compact code in of many multiple stacked sequences and event handlers.

  ---

  I also had a separate problem with the location of the label once the font of labels is changed / converted, but have not yet checked if this still happens in 2012 of Labview.

  
  

• Size of the file after conversion to the format even

  Hello.

  I'm quite new to Adobe Premiere and I wish I had an answer for my problem:

  I did new sequence AP of the 20 MB .flv file. How is it possible that after have exported them with the codec FLV and 'Attribute source Match' preset, it becomes a 60 MB file?

  Concerning

  Paul

  Because 'Attributes of Source Match' has nothing to do with the flow parameters. If you want the file exported to be same size bytes, be sure that your rate is more or less the same for video and audio as the source file. If you are not sure bitrates of the source file, use a product like MediaInfo to find out.

• Distortion after you convert the wav to mp3 file

  Hello

  I work with a sampling frequency .wav file 8 k, 16-bit, mono a Skype conference call that was recorded by the computer. Wav is ACM Microsoft file: Microsoft ADPCM. The audio quality of the original is not optimal, as you can imagine, but when I do my changes and convert to mp3 that sounds horrible. I don't know the technical term for it, but it sounds muffled and distorted - the effect you get when cut you your hand in front of the mouth and the move while speaking. I am at a loss for what to do. Is there a setting I need to change before conversion? I know it's a sampling rate low (I usually work with 44.1 K), which would contribute to the problem?

  Any help is greatly appreciated!

  Thank you.

  In a quick test, I was able to get significantly better results with an 8K, 16-bit source conversion to MP3 when you change the MP3 setting to 16 kHz.  In the file > save as dialogue, after selecting the MP3, click on the button 'Edit' next to 'Type of sample' and change the sampling frequency.  The file size was virtually unchanged, but the audio quality has been increased and by looking at the two files in spectral view showed a marked improvement.

  Edit: Oops, I answered by e-mail and didn't know that this has been posted on the forum Audition 3.  I suspect the results will be even better with the 3 MP3 encoder - both are by Fraunhofer.  Here were the differences I've seen when writing 8 k 16 K vs.  The resulting file is 29KO in both cases.

  

  MP3 recorded to 8K sampling frequency setting

  -------------------------------------------------------

  

  MP3 recorded at 16K sample rate setting.
  

• No sound after re - install the W7Pro

  W7Pro just re-installed.  Had her before but not after the re - install.  Graph shows the evolution of the sound volumes.  plugged in and turned on, codecs, etc.  Poster of hi-def device works correctly.  I'm at my wits end.

  Hello

  According the description of the problem, it seems that you can not hear the sound of the computer after reinstalling Windows 7. I understand the inconvenience.

  Y at - it no point yellow exclamation or symbols of the red cross listed under sound, video and game in Device Managercontrollers?

  I suggest you to uninstall and reinstall the latest version of the audio drivers on the computer manufacturer website and check if it helps.

  Read the following article.

  No sound in Windows: http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Just reply to the State of the issue and let us know if you need more help. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards.

• Catalogue number after conversion of the LT5 to LTCC

  Hello

  I have a serious problem with my catalog after the installation of the LTCC.

  After the conversion of catalogue I see more photos in the right direction. When I see my pictures in the library, that everything seems ok, but when I use develop the function my pictures completely change the colors and appearance. Please take a look below.

  Can someone help me? Thank you for your support with kindness.

  I speak Italian, English and Spanish, so don't worry, I'll understand.

  See you soon

  Liam

  

  Hi LiamDotz,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

  Kind regards

  Tanuj

• Problems with sound after you install the operating system

  I have a compaq presario that originally vista os, the system crashed and I could get the recovery work so I installed windows xp and now I'm having problems with the sound. What should I do? I tried to locate the drivers requarding info. I keep getting error messages indicating that I have no audio device. Is it possible to go back to vista? I don't have an instillation cd or recovery for vista cd. Any help would be great.

  Hello

  Go to the link drivers HP > search your computer number model > XP OS > download and install the audio drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If no audio driver XP is available, HP provides them.

  Through the installation of XP, you have destroyed the provided HP recovery Partition Vista to reinstall Vista:

  Solve a common problem of recovery with the HP Compaq computers.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be started from either the desktop or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
   
  Contact HP and ask them to send you a set of Vista recovery disks.
  Normally, they do this for a small fee.
  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340446095470.876444892.199480143
   

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• No sound after you connect the headphones.

  I have a pavilion dv6 laptop.  I have a headset that I want to use for the games, but I can't hear sound through them.  When I do my helmet of communication to the default device it doesn't let me.

  Hello Jack,.

  I certainly understand the inconvenience that you cross.

  It is possible that this problem would have occurred due to some incorrect settings or because of an incompatible or corrupted audio drivers.

  Important: Make sure that your headphones are not connected to the line (headphone) jack of your sound card or computer (unless you want to be listening with headphones rather than speakers). When you connect in the headphones, most computers automatically cut the sound to the speakers. Ensure that the headset is completely and firmly inserted into the correct socket. Plug in the headphones and see if the same appears in Device Manager.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. Have you tried plugging in external speakers or any other helmet and checked if you are able to hear the audio?
  2. You are able to get the sound on your laptop's built-in speakers?

  If you are not able to hear the audio on the built-in speakers or other external speakers or any other headset, I would suggest trying the following methods and check if it helps.

  Method 1:

  Open the hardware and devices troubleshooter.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, please follow method 2.

  Method 2:

  Check with the volume controls. Please follow the steps below and check if it helps.

  (a) right click on the speaker icon in the taskbar, then select volume control options.
  (b) check on "all devices evolving sound.
  (c) make sure that you have "Default uncontrolled communication device".
  (d) place a check on the speakers and headphones. Click on apply and OK.

  If the problem persists, follow method 3.

  Method 3:

  This occurs when you have the speakers, by default. We need to put the headset as default. Please follow the steps below and check if it helps.

  • Exercise the functions mentioned below to set the speakers as default.

  • Click Start and click on Control Panel.

  • Click sound, and then a new window will open.

  • In the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  • Now, check if the headset is listed there and right-click on it and choose activate.

  • To highlight this helmet and click "set as default".

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 4

  Method 4:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  I hope this information is useful.

  If the problem persists, you can write to us and we will be happy to help you further.

  Thank you

• Need hlp with conversion of the. RAW binary file to image

  Hello.

  In my application, I need to transfer images from camera of impressive to LabView interface with capture card and then convert these images into format binary .raw. Camera works very well, so I have the raw files using simple VI (attached picture "Cup"). The problem starts when I'm reading these files and to recall them as images in LabView (just to make sure I have the pictures on the right). I found an example VI that used to perform the conversion form binary of image, but it does not show the correct image. Could check you my screws and point, where the problem is.

  Thanks, ilya

  You should write and read the same data type. In your case, you wrote IMAQ Image, but read table 2D.

  Use Image IMAQ to array before writing, as shown here, for example: http://forums.ni.com/t5/Machine-Vision/can-imaq-write-tiff-file-2-save-array-of-SGL-values/m-p/18519...

  Also - why do you need raw and use PNG or TIFF to store the image?

  Andrey.

• Dell xps l502x freezes making buzzz sound during playback of the audio or video file

  I have a two year old dell laptop xps l502x, who recently started producing some strange audio buzzz at regular intervals during playback of audio or video file.le sound is very similar to the sound when games used to freeze with the same anonying buzzz sound which is a very well known with the XPS L502X.i used only to have problem that the sound during games used to hang , but recently it has begun to occur during playback of audio or video files too.

  RTZ87,

  I just had a quick glance and the solution is in the thread below. Uninstall 'Dell Support help' and 'Dell Support Assist Agent'. They have been automatically installed on your laptop in the last two days and seem to be causing the problem.

  

• After you rename the directory of missing files

  Hello

  I rename a directory of Windows and now all of the previous content are missing.  I need suggestions on how to recover.

  Background:

  My machine runs on Win7 x 64.  The "Downloads" folder under my profile of the user (C:\Users\Brian\Downloads) had been innaccesible for many months.  When I try to open, that it does not open and, possibly, the time-out.   I could see the content when you browse the directory in a shell.  As a work-around to access the content via a command prompt I moved all the files/directories in a new directory that I named "downloads" in the folder My Documents (C:\Users\Brian\Documents\downloads).   All files are installed perfectly (about 9 GB) and I could see all the files in the new profile of downloads (C:\Users\Brian\Documents\downloads).  Then I renamed the «_downloads» download folder

  When I open the _downloads file then all files were missing!  The directory is now completely empty.

  I tried two programs of recovery of files (NTFS Undelete and Piriform Recuva) without success.   I haven't restarted the computer.  I read that a possible solution would be to rename the original name 'downloads' folder, but I didn't yet.

  Any suggestions on next steps?

  Thank you!

  TestDisk (free) or R-Studio (not free).

  CHKDSK may be able to solve this problem, but be aware that there is always a risk of data loss when chkdsk is run, it is advisable to start on a clone rather than the original disk where the files are stored.

  John

• After conversion &amp; economy in my file, word doc is blurred

  Why after conversion & economy in my word doc file is scrambled?

  Hi mackibee,

  How the PDF was created? If it was created by an application third (i.e. something other than an Adobe app), the file may not have the necessary information to ensure a clean transformation. Please visit: Adobe ExportPDF Will convert both text and form... | Adobe community.

  You may have more luck if you turn off OCR, as this document described: How to disable the optical character recognition (O... |) Adobe Community. But this option is not preferable, if the PDF file has started as a scanned document, OCR is necessary to convert a text image into editable text.

  Best,

  Sara

• Problem with decompression after download of the adobe CS4 Web site

  File number 0218517962

  never to install CS4 after racing unpack 2 programs downloaded from the ADBESTWDCS4_LS Web site! The size of the file 7z 4 mb and ADBESTWDCS4_LS1. the application 1.2 MB file size through unpack it deal with the green bar but disappears then just CS4 never appears to reun Setup to enter the serial number, I mobile

  You shouldn't have to unpack anything manually.

  After you download the .exe and .7z files, all you have to do is double-click on the .exe file and follow the instructions.

• No sound - after the installation Win7 sp1

  I have no sound after win 7 sp1 app nor can I press FN - F6 to activate the sound. Any ideas?

  Thank you

  I forgot how I solved it, but it has been resolved. Thanks for the review