Attaché; savings in the camera photo and laptop? EOS Utility 3

Similar Questions

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• To access the files Photo and video imported photos

  I had turned off as long as I could before moving to the home of iPhoto to Photos. I now use of El Capitan, with Photos and finds it difficult to find the photo and movie files that I import. In the program there, but when I search by name, they will not be displayed. The Terminal solution for show hidden files (defaults write QLEnableXRayFolders AppleShowAllFiles YES) does not work. I export the files from Photos to a new location and then can see them in a search. Is there a way to fix this? I remember he was in earlier operating systems, but am not having much luck right now.

  Thank you.

  Yes - there is access via the media browser (in the lower left corner of the Panel source in each window open/attach/upload under Support == > photos == > Photos) or as you would via export - still not access you it directly with the finder (and you should have never done that in the past - now with many operations in the background and iCLoud is simply not possible as only the program of database SQLite Photos) the status of the contents of the library)

  This is for iPHoto but is most often still OK for Photos - How do I access the files in iPhoto

  LN

• HP Pavilion Notebook 15-p004nx: problem in the camera into my laptop

  day support:

  I have problem in this laptop:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model...

  My laptop was have windwos 8 instilled on it then I want windwos 7 and all work well only the camera did not work well... I have download the drivers from the above link but I do not see any driver on the camera just this one:

  "Cyberlink YouCam software."

  I know this is the program I download and it gives me this error:

  http://i.imgur.com/YBKrHkj.PNG

  My camera driver:

  http://i.imgur.com/o4aSx5E.PNG

  Control Panel features:

  http://i.imgur.com/j1gQqOe.PNG

  help me and thanks a lot.

  Hello @TheWolfYo,

  Thanks for the quick response!

  If you have exhausted all the solutions mentioned above, then you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Kind regards!

• How to reinstall the applications Photos and music

  Long story.  I have two problems that seem to be related.  The second is the reason for this post.  For background, Christmas day, several Windows updates have been downloaded and installed, but 2 failed.  The device is a R/T Area2.

  Now, my reason for being here.  Since that time many, but not all, Metro/modern apps will not work.  It comes to Mail, calendar, Contacts, more of MSN with Photos and OneDrive applications. The start screen appears and then goes away.  After spending a lot of time with the Support of Microsoft, the only solution seems to be to reinstall these applications.  It worked for the most part for example Mail and MSN applications, but for Photos and OneDrive I have a problem I can not uninstall, this isn't an option.

  I hope that someone here has a solution.  Is there a way to force the reinstallation of applications such as these?

  Kind regards

  Gary

  I came to the conclusion that an update was my best option.  It took a long time to clear enough space on my drive but, finally, managed to do run.

  Now, it seems that OneDrive is the only app that crashes.  Not too bad.

  Thank you.

• Not able to open the camera into my laptop which is configured with windows 8. Please help me solve this problem.

  I have HP laptop & upgrade windows 7 to windows 8, here I am able to see the camera, if I click it will open and display connect them a camera too in the background I see 3 tools with off mode. How can I open my webcam? You can help it. Not able

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• What is the difference between the export photos and pictures of unmodified export

  I'm trying to export my library of photos of 30 GB on a hard drive. When you choose file > export gives two options: export the Photos... and export Unmodified Original...

  Is there a difference between the two options?

  When I export the location data is backed up?

  The original unmodified are image files full-size that have been imported into the library at the start.

  Export Photos will give you the edited version (if it is edited).  Also, you will have a chance to change the size of the file (Mbs) and/or the image (pixels) size when exporting and to change the JPEG, tiff or png.

  

• How to save the book Photo and the current format before you create a new

  I want to discover a new book and format using the same photos (than my current one) - I'll lose the current if I choose the size and the Format change?

  I lose the current if I choose the size and the Format change?

  Yes. The old book will be lost.

  Make a duplicate of your book and try the other themes on the copy.

  Switch to another theme can reformat a few pages, this text may be lost.

  CTRL-click on the book in the library of Inspector in the sidebar and click "duplicate".

  

• How can I get the viewer photo and fax for windows on windows 7

  my computer does not have windows fax and picture viewer but has the windows photo viewer. Unfortunately the windows photo viewer is not moving images.

  I need help

  Thank you

  Have you tried the free software IrfanView to view your animated .gif files?

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView and IrfanView plugins
  http://www.download.HR/download-IrfanView.html
  (scroll down a bit for the download links)
  (Download plugins too)

  To display .gif inches open IrfanView and go... File / thumbnails... and
  Navigate to the folder in which the .gif files are archived. Double click left one
  .gif to see Animate in the main display window.

  It is also available for free download at the following link which may be worth a try:

  Windows and Windows 7 - animated gifs photo viewer "gifview.exe."
  http://www.SevenForums.com/music-pictures-video/39095-animated-GIFs-Windows-Photo-Viewer.html

• Re-importation of the renamed photos and keep the changes? [LR3 / Win 7]

  I imported two cards from photos, with a couple of video clips on each.  I've added keywords and renamed files when importing (used Lightroom to copy them to the hard drive and rename it).

  I edited the first 50-100 photos, making a few changes to develop, then I realized that somewhere along the line, some files were not imported (maybe 10-15), and I think I started the import on the second card with the wrong number.  So now, I have a couple of missing files and a bunch of photos that are mysteriously failed.

  I would like to re - import two cards without losing the changes I've done so far, is there a way to do it?

  Sorry if it does not make sense, I'm not 100% sure how it happened.  Thank you!

  It is in the library. Menu metadata > edit Capture time.

  Right, the DJ reimport would lose your settings, although initially on XMP would reduce the amount of lost things.

• Make the camera zoom and rotation around object

  This has been requested before - and no response. Then.
  
  "Is there an easy way to duplicate the kind of camera rotation in the Director 3D preview window? -That is, where the horizontal movement of the mouse rotates the camera around the axis Y the world and vertical motion rotates around a Z axis relative to the camera (or something... eh, as lines of longitude and latitude on a globe). »
  
  I'm doing a model viewer, and the camera of the orbit and behaviors to rotate objects are not very convincing...
  
  I thank very you much for any help.

  Quote:
  [Posted by: ] wacko
  "Is there an easy way to duplicate the kind of camera rotation in the Director 3D preview window? -That is, where the horizontal movement of the mouse rotates the camera around the axis Y the world and vertical motion rotates around a Z axis relative to the camera (or something... eh, as lines of longitude and latitude on a globe). »

  I'm doing a model viewer, and the camera of the orbit and behaviors to rotate objects are not very convincing...

  Consider this example: http://necromanthus.com/Games/ShockWave/tutorials/PanCamera.html
  To "Zoom In / Zoom Out" just to translate the camera on its axis of 'X '.
  see you soon

• I lost all the emails, photos and notes after iOS Update 9.  I am able to get back them?

  I have lost all emails, photos and notes after that 9 update iOS.  Is it possible to recover?  Help, please!

  It is very unusual - do you by chance have an iTunes or iCloud backup, you can restore?

  Restore your device from an iCloud or iTunes backup - Apple Support

• How to disable the auto launch in canon EOS utility on my mac?

  Can someone let me know if you can disable this automatic launch. I'd like to use capture one, utliity eos on my computer as a backup plan. With the eos utility auto launches it will not capture to mount the camera. I tested it on my tour where I have the utility and capture works perfectly. So I think this is the device of auto-launch or it could just be that eos is installed and which has precedence.

  I use the eos utility 2 - 2.14.20.2 with a mark II

  My os is Yosemite 10.10.5

  Thanks in advance for any help

  See you soon,.

  Brad

  In the Canon utilities in the Applications folder, there will be an EOS Utility folder. In this case would be an EOS Utility application and EOS Utility 3 folder. If you run the application it gives you the icon on the menu bar.

  

  

• How can I find the camera profiles and load them in Camera Raw?

  I did a clean install of Windows 7 and reloaded all my apps. Photoshop CS5 Camera Raw used to show my Canon 60 d and its objective, and he has now no camera profile. I found a way to search the photo/target device profile in Photoshop (filter - Correction of the goal), but not how to save him, so I have to do whenever I load PS I can not yet know how to get one in Camera RAW. Doesn't seem like it should be so difficult. I should have thought of it when I'm in charge of CS5, but now I can't seem to get there. I thought that a quick Google trip would solve the problem, but without SOAP so far. A lot of advice on the use of profiles, but nothing (except the invalid pages), saying: how to get things pretty in there first. Any help would be appreciated.

  Have you installed the update to camera raw 6.7?

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

  You should probably search, download and install the other photoshop cs5 updates, if you have just installed photoshop cs5.

  Updates