Attached to my computer problem

Similar Questions

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• my computer says that my nec dvd rw nd - 6650A is not attached to my computer

  my computer says that my nec dvd rw nd - 6650A is not attached to my computer. It has never been deleted so how can I fix this error?

  Hello

  1. What is the full error message you get?

  2. when the problem started?

  3. did you of recent changes on the system?

  You can read the following article and check if it helps.

  Your CD or DVD drive cannot read or write media

• received message one of the usb devices attached to this computer has malfunctioned - help please

  I received the error message one of the usb devices attached to this computer has malfuctioned and windows does not recognize.  I removed the hub and got the same message when using devices directly into the computer.  I tested the devices on another computer and why have been recognized without problems.  I tried all the patches as in Device Manager, looking for the software upgrades etc.  Suspect that this has happened when a member of the family visit charge pictures from a flash drive to update his facebook site - I do not know if all programs have been loaded to remove/uninstall but do not know that it would have been the 26th Dec - please help

  Hello Ann,.

  If it is a laptop computer, shut down Windows and remove the battery and the power supply of the PC.

  Wait a few minutes, and then reconnect the battery and start Windows.

  Plugin your device to see if it works, without the hub.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  Original title: USB device not recognized / dysfunction

  "Unrecognized USB device".
  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

  This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

  Open recognition of the USB device by using Device Manager.

  .. I am at a loss: P please help thanks!

  isable the power management of the USB hub and I couldn't find the

  Hi LadyDefi,

  You can try to uninstall and reinstall the USB controllers and check:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and test to make sure that the problem is solved

  For more information, see the following article:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

  Original title:

  My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

  I get a windows notification that says-

  "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

  I have Vista 32 bit OS on my laptop.

  My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

  I tried to look for a download of update on the site of Logitech & only found:

  6.32.20 set - point it did nothing to help.

  I also tried to move the receiver to the other 2 ports USB w / still the same results.

  Are there other downloads or solutions that will help w / this problem?

  You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

  Also try the steps below to reset the power of USB:
  (a) the laptop off, unplugged from the wall outlet.
  (b) remove the battery for a few minutes, then reinstall it.
  (c) then restart the laptop.

• Error USB 'one of the USB devices attached to this computer has malfunctioned'

  Original title: Problem USB on Vista 32 bit.

  I have a 32-bit vista when I pug anything anyone posts USB the same message comes up saying one of the USB devices attached to this computer has malfunctioned and windows does not recognize it. Can someone please advise?

  Hello
   
  Method 1:
  
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
  
  Method 2:
  
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• My system has ceased to be able to download anything. I can't watch attached, or the computer will allow me to update.

  can not download or update

  I have a laptop Toshiba Satellite running Windows Vista.  About 4 months ago it stopped being able to download anything. I can't watch attached, or the computer will allow me to update things like... Adobe Flash Player. I turned off my Kapersky anti-virus program and tried to look all filtering of e-mail settings. Nothing has worked.  When I click 'Download' attachment (Hotmail account), it gives me three options... open, save, cancel... When I click Open or save he responds quickly unable to download... try again or cancel are my only options.  If I click on start it immediately opens the same question... try again or cancel.  Can anyone help? My daughter needs to send me a pdf file, so I can print for the school.

  Help, please

  Andrew

  Hello
   
  1 did you changes in the computer before this problem?
  2. meet you download only with Hotmail account problem?
  3. what web browser do you use?
  
  Method 1:

  I suggest that you have temporarily disable or uninstall the security software installed and check if the problem is resolved.

  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2: Keep the computer in a clean boot and install the update.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode.

• "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

  Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive.  Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  Why he says this?  And what can I do about it if anything?  I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing.  So I don't know what is happening or how to fix it.  Please help me!

  Hi Carla,.

  Please go to the Microsoft Community Forums.
  After the description of the question, I understand that you can not use the mouse on the computer wireless.
  Let me go ahead and help you to question
   
  What is the brand and model of the mouse?
   

  Here are some ways you can follow to resolve the problem:

  Method 1:
  Try to connect to other USB port and verify.
   
  Method 2:
  I suggest for the link and follow the steps in the article:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122#appliesTo
   
  Method 3:
  Remove and reinstall all USB controllers
  Follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• GRIMBOT webmail I lost functions like delete button and light the contents of the Inbox. It is a computer problem, all three of my browsers have the same problem

  Web mail indicates it has mail in my Inbox... but it does not show in the display. I pour the contents in the trash to read the mail.

  I lost the function of the button Delete... I have to use the button remove on my keyboard

  This problem occurred after I installed several plugins to download youtube videos. I disabled the plugins... I deleted Firefox and reinstalled... no change.

  This problem also occurs with IE and Chrome. I guess that's a computer problem.
  I confirmed that I have the latest flash installed and running on my computer

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

• My sister has problems on his laptop, how can I connect to the laptop with my labtop to help him with his computer problems? Thank you.

  My sister has problems on his laptop, how can I connect to laptop with my labtop to help her with her computer problems when I live several States away? Please help me if you know how to do this thank you.

  Suggest you use Team Viewer, free version.
  It is used here every day for several hours.

  Please see the links below for more details...
  http://www.TeamViewer.com/en/index.aspx
  http://www.TeamViewer.com/en/products/remotecontrol.aspx
  http://www.TeamViewer.com/en/help/cat15-remote-control.aspx

• I can't receive an attachment from one computer to another in my wireless network

  Whenever I try to send an email with an attachment from one computer to another in my wireless network, the attachment comes through.

  I changed it in plain text... and it works!

  You are the very welcome. (It was my first suggestion).

• one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
  kindly help

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Error: "Windows cannot start because of a configuration of the disk of the computer problem" in computer Dell Dimension 2400 Windows XP startup problem.

  Original title: problem starting on a Dell Dimension 2400 - how to set up the drive with a keyboard.

  I have a Dell Dimension 2400 with Windows XP, start, he can't go to the home screen, so I can't use the suggestions to start right click.

  The error message indicates "Windows did not start because of a configuration of the disk of the computer problem".
  "Cannot read disc startup selected." check material stand of disk and the path.
  How to set up or fix this problem with a keyboard

  Hi MarieButler64,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.