Attachment of the nano Server - physical plant - VHD

Similar Questions

• Creating a domain with the administration server on a remote computer

  Hello
  
  I do not understand how to create the following architecture:
  
  physical machine #1: installation of weblogic server = > for the administration server
  physical machine #2: installation of weblogic server + OSB = > for the osb server 1
  physical machine #3: install the weblogic Server + OSB = > intended to be the server of the osb 2.
  
  If I create my machine field #1 I don't see any options of the OSB in the product list (I tried to copy all the pots in the directory of models of the installation of the OSB on machine #2, but it doesn't seem to work) so I can't create a domain for my server osb.
  If I create my #2 machine field, I see all the options of the OSB in the product list and I can create my domain but I can't make a pack / unpack the machine #1 because I have an error message so I don't know how do to transfer my domain name to the #1 the machine and then start the server administration here.
  
  All of the documentation I find examples with adminserver running on the same physical computer as osb 1.
  
  Could someone point me in the right direction?
  Thanks a lot for your help
  Emilien

  Hello Emilien,.

  You must install the same products on 3 servers for this to work.

  It also means that you need an additional license for the #1 server, so that may be an expensive route for :-)

  What about Peter

• I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
  The procedure below: the problem: give perminiant solution pls
  1. delete the field and add the domain
  2 delete the user profile, and create user profile.
  Error:
  An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• \\HOME-server is not accessible. A device attached to the system does not work.

  I use Windows 7 Professional. My network server is WHS V1.

  I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
  All of a sudden it has stopped working.
  I get the message
  \\HOME-server is not accessible. You might not...
  A device attached to the system does not work.
  
  
  I searched in the WHS forums, a post suggested http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm
  I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
  31 system error has occurred.
  A device attached to the system does not work.

  And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
  53 system error has occurred.
  The network path was not found.
  However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
  I did a system restore until the problem occurred first to rule out any changes to the system.
  The problem occurred again.
  This means that my Sync Center shows none of my synchronization partnerships.
  Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
  TIA
  Hello
   
  The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
  Please visit the below mentioned link to find a community that will provide the support that you have requested.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
   
  Thank you

• B2B attachment filename having the space to the UNIX server.

  Hello B2B gurus.
  
  I'm working on B2B for Rosettanet.
  
  It also sends attachment picked on UNIX server as well as the payload of PIDX format.
  
  If the name of the file in the UNIX server has a space, Rosettanet with room attached error
  
  B2B-51570-
  News of the machine: (hou - ecmsoatst01.swn.com)
  Description: Error of attachment
  
  If the file name does not have any space, the logic of the attachment works file.
  
  I used the below referral link, which was really helpful to the logic of the attachment.
  
  http://Anuj-Dwivedi.blogspot.com/2011/04/RosettaNet-attachment-handling-in.html.
  
  Can someone help me manage the file name with space in the UNIX server to send as an attachment.
  
  Thank you
  Sunil

  You can try to escape from the space with %20? For example if the path is file:///b2b leader/OrderBill.pdf then as file:///b2b%20file/OrderBill.pdf

  Kind regards
  Anuj

• Print server attached to the new network, but do not find add printer printer

  After an upgrade to a new router (a Netgear N600 Wireless Dual Band Router WNDR3400), I spent a LOT of time trying to make everything again to talk with each other.  I've gotten to the point where all the wireless devices PC AND my WPS54GU2 print server are all properly connected (I can log in from another PC print server and print a test page).

  Unfortunately, I was completely unable to add the printer connected to the print server to the same PC that can open a session and ping the print server.  The wizard does not find just any network printer and when I type in the name of the server and printer I get the error message "the server for the printer"Print Server Null driver"doesn't have the printer driver installed."

  What I'm doing wrong here?

  BTW - I wasn't happy that I had to lower the security of the new router WEP wireless, or that it only took the key to SPELL as the paraphrase, but I also noticed that the print server was not a option for the safety of new protocols there was an upgrade of the firmware available.  Are there new print there servers work better with better security protocols?

  Thank you

  Craig

  If the installation wizard is not able to detect the printer connected to your print server. Make sure that the "printer" is correctly plugged into the PS and the Led for the same are lit on the PS.

  Second, you can try to configure a TCP/IP port to make the printer work.

  Start by defining a static IP address on the PS, and then set the TCP/IP port. The same link is given below:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=bb9993cc2c764dfab25dcb22d8eb0d35_4175.XML&PID=80&r...

  Then, this model does not support the WPA or WPA2 Personal. You can go for WPSM54g that supports both the level of encryption that I mentioned here. See the screenshot below.

  

• [Recovery] Move the Essbase server to another physical server

  Hi all

  
  I have 3 part of EMP 11.1.2.1 Solaris Server environment:

  Server1.company.com:

  • Foundation, APS, EAS services

  Server2.company.com:

  • Essbase, Essbase Studio Server.
  • Installation on a SAN using Userid hypadmin drive

  Server3.company.com:

  • *Nothing installed here *.
  • His case Server2 breaks down, the standby server.

  Note: I couldn't find documentation for my approach below... So please understand the risk involved before trying the same thing.
  Prior to disaster:

  • I copy the base directory of hypadmin to Server2 to Server3.

  During disaster recovery:

  • I update the host name Essbase server from Server2.company.com to Server3.company.com and similarly update the opmn.xml file.
  • Finally, mount the SAN on Server2, and start the services.

  --

  Anyone has done the same... ? Have been facing problems? Is there a better way to do this?

  Thank you

  Kind regards

  Kent

  Hello

  I think that the usual way to proceed is to have a DR environment, rather than a single server (so for you, you would have 2dr servers). DR environment has entries from the hosts file to map the host names of Production at the addresses IP of DR.

  The RD you are connected to a separate instance of SQL and you install and configure products exactly as you would for Production (exactly the same names).

  Finally when you are finished you stop the DR environment and on newspapers SQL data bases of Production and DR.

  If your Production environment breaks down you stop SQL log shipping, then you can bring up DR and change (if necessary) DNS names to give access to your users.

  For the storage of Essbase you can save Production to DR cubes or mount SAN Production DR. The only problem with it is that if Production falls down and the SAN is lost, you cannot bring up DR entirely or the other.

  Let me know if you still have any questions.

  -Dan

• Copy existing attached file of database to the FTP server.

  Attachments in our TAM system are currently stored in the database now occupy almost 40% of the database. A decision was taken to transfer these attachments from the database to the file system.
  
  I changed the definition of the URL to point to an FTP server instead of the RECORD://PSFILE_ATTDET delivery, now my question is how to migrate existing attachments from basic to this FTP server.
  
  Book PT CopyAttachments utility takes a very long time and I want to do this in small batches (say through a motor approx.) of my source (db) destination (ftp server). Any ideas?

  Create an engine of the application (for example) and use the GetAttachment build - in function to download a file of source record://PSFILE_ATTDET on the file of the application server/processcheduler system.
  After that use PutAttachment to transfer files from filedir appserver/processcheduler to the ftp site.

  Code would be something like this:

  local & rsPSFILE_ATTDET rowset
  & rsPSFILE_ATTDET = CreateRowSet (record. PSFILE_ATTDET);
  & rsPSFILE_ATTDET. Fill()

  i = 1 & at & rsPSFILE_ATTDET. ActiveRowCount
  SYSIXCOL = & rsPSFILE_ATTDET(&i).getrecord (1). SysFileName.value;
  & ret = GetAttachment ("record://PSFILE_ATTDET", & sysfile, [MakeUpALogicalFileName]);
  & ret = PutAttachment ("your ftp site", [GenerateNewSysFileName], [MakeUpALogicalFileName]);
  -end;

  GenerateNewSysFileName is usually a combination of datetime UuidGen() & %.

  You can of course also use CopyAttachments, except that with code above, you have more control of wich batch of transfer by adding a where clause for the instruction of filling clause.

  Published by: Hakan Biroglu, February 11, 2012 19:23

• How to separate the application server and web server on the level of physical servers?

  I want to separate the application server and web server: locate on different hosts. Generally, we use Weblogic ACE. In the future maybe use Apache Tomcat as web server.
  Example,
  192.168.1.10 - as - Weblogic application server / module EJB
  192.168.1.11 - as a Web server - Weblogic / WEB module (can be - Apache Tomcat)
  
  Impossible to find examples and resources about it on google.
  Thank you.

  So, if we're looking for a subject such as:

  try {
      someEJB = context.lookup("ejb/Videotheek#model.logic.Videotheek");
  } catch (NamingException e) {
      e.printStackTrace();
  }
  

  If the EJB application is clustered in an object of type ' ClusterableRemoteRef (-4005477377232786958S: 172.31.0.107: [7003,7003,-1,-1,-1,-1,-1]: [8351443287261246917S:172.31.0.107:[7002,7002,-1,-1,-1,-1,-1]:ScriptDomain:VideotheekServer1/292])/289 172.31.0.107:ScriptDomain:VideotheekServer2 - 4005477377232786958S:172.31.0.107:[7003,7003,-1,-1,-1,-1,-1]:172.31.0.107:ScriptDomain:VideotheekServer2/289,-' is returned, which is part of the wlfullclient.jar.)

  You can try using the EJB or the annotation of the resource (do not know with certainty if Tomcat is favorable). For annotations work, you must use version servlet 2.5 or later. JNDI research work in a general such as for example Tomcat servlet container.

• How to change the windows server 2003 standard Edition sp2 activation key

  I'm going to conver physical server to a child in HyperV.

  When I create the machine of the child after that I converted with disk2vhd.exe small tool the physical server to the .vhd file, I got the message to reactivate windows, because it's new material.

  How can I do this?

  The operating system is windows server 2003 sp2 standard edition

  Thank you!

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• Thunderbird is a hidden ' mailto: ' line in each email address I put in the body of my message. It screws the processor end on the mail server I maintain upward

  I maintain a club email list by sending plain text commands to him such as:

  Subscribe to [email protected] members

  (If you're old enough you get an idea of which continues to use the web master).

  Thunderbird started attaching an invisible "mailto:" in front of each of the email addresses in my orders and the remote server rejects them. I see these hot links in my sent folder to outgoing mail.

  I have disabled HTML processing and tried to send text only, but hyperlinks are always there in my copy sent the message in plain text box.

  I have POP my mail for some reason, more even than just my own convenience.

  What is going on?

  -russest

  Use ctrl + u to see the source of the message. I think that you will find no sign of the mailto: source, which means it is added to display the link for you. Since it is internal and private to Thunderbird (unless you can prove that it really is in the source of the message), then I don't see how it affects your server. Your server is not looking at Thunderbird, is it?

• I am not able to access gmail. Error reading - the proxy server refuses connections. Help, please

  I get the attached error message when trying to access my gmail account "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. The problem started today. No problem before.
  Second problem, though less of a problem - I'm using Firefox 16.0.2.I tried to upgrade to the latest version and received the following message "ERROR the requested URL could not be found.
  I can still access my gmail account but my IPAD

  Hello robd, please check firefox > options > advanced > network > connection - settings... if firefox is configured to directly connect to the internet ('no proxy').

  Firefox cannot load websites but other browsers may

• Problem with LabPython - implement the Python Server

  I booted the server as follows:

  

  It was made as a separate VI, and I ran it before the opening of any other VI.

  Initializes the server, but I can't get the variables of the
  the code is calculated. Here is a very simple program, with its
  error code.

  

  I was able to run this code previously. The variable for the VI of data is identified as an integer.

  Attached is the VI above

  You forgot one thing.