#Attributes.ini on a folder empty

Similar Questions

• How to remove a folder empty on the desktop

  I created a folder empty to use on my desk and not use it. Now I can't delete it! If I delete, or drag to the trash, it disappears. But he's back on the desktop the next time I turn on the computer. I want to remove it permanently - how should I do this?

  Hello

  Please proceed with loading safe mode and delete the folder from your desktop.  This should take care of this for you.  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• questions about files #attributes.ini

  (1) influence the subdirectories?

  (2) I know that the folder of spool in % systemsystem % has the value DirectoryIsolationMode = merged. What happens if I change to WriteCopy, that will affect my impression?

  Thank you

  rice4lunch

  (1) influence the subdirectories?

  If a file does not contain a #attributes #, it will inherit all settings of file ##attribute of the parent folder.

  (2) I know that the folder of spool in % systemsystem % has the value DirectoryIsolationMode = merged. What happens if I change to WriteCopy, that will affect my impression?

  as noted above, this = bad karma

  See you soon,.

  EvilOne

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Accidentally deleted the 'sent' folder (empty). How to restore as a system folder?

  I accidentally deleted my file 'sent', which was fortunately empty. I can to restore a "Sent" folder, but it is not now a system and falls down my lists alphabetically. How can I make a folder system, remaining near the top of my account.

  Thank you

  Go to account settings, Copies and folders, assign the folder "sent" with the envoys. If this does not work, use the other.
  That solve the problem?

• Cant sent items folder empty

  Hi all

  I can't empty my SENT FOLDER it says TOTAL: 4081
  and even if I select messages, and then press DELETE, it remains
  is not empty it. I'm doing something wrong?

  Right click on the "Sent" folder and select "Properties".
  Click the 'Repair file' button.
  Click OK

  Select another folder, and then select new folder "sent".
  If this does not work then watch the news below.

  Q: is that what you want to completely remove everything in the "sent" folder?
  you don't mind losing all what it?

  If so, try this:

  Make visible the hidden files and folders:

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  In Thunderbird
  Help > troubleshooting information
  Click on the button "see the folder.
  a new window opens to display the name of the profile folder.

  Close Thunderbitd now - this is important.
  Click the folder "mail".
  Click on the name of pop e-mail account.
  Find and delete:

  • File "Sent" - no extention
  • File 'Sent.msf '.

  Close this window - upper-right X

  Restart Thunderbird.
  When you send an e-mail, you will get a new folder "sent".

• FAX PROGRAM FOLDER EMPTY

  Fax program folder is empty, and the original Windows XP disc does not load indicating the missing files. The file is looking for Windows XP Professional disc that I inserted every program disk that was provided with my computer.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make any change to the system?

  If you are referring to the Windows fax service, then it could be that the fax is not added in your system. I suggest you follow the steps mentioned below.

  a. Click Start, and click Control Panel.

  b. click on add and remove programs and then click Add and remove Windows components.

  c. place a check mark next to Fax, and then click Next.

  d. then check at the starting location > all programs > Accessories > communications > you'll be the fax service is installed on the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Unchecking read only attribute on files and folder, subfolders does not persist

  I'm trying to disable the read-only attribute in the properties of a folder in the file system.  I uncheck this attribute, I say, too, that he would do that by clicking on apply, then it does to all files, folders, and subfolders... etc and it does.  Then I click ok to close the properties box.  If I reopen it the properties box, the read only attribute is on again once.  I tried several times but keep having the same problem.  I am logged in as administrator.

  How to keep turning off the read-only attribute?

  Do you mean that the read-only box is blue? This does not mean that the read-only attribute is on.

  See this: http://www.vistax64.com/tutorials/107890-read-only-file-folder-attribute.html

• How do I delete the folder empty Favorites?

  How can I delite an empty folder in my favorites list. Thank you, Diane

  Right click and click on delete.

• How to remove a folder empty program files?

  Hello.

  I uninstalled my antivirus avg and use avg uninstall program to remove completely all components of avg, avg aa folder remain in c: program files, I try to remove it but I can't use some file shredder software but each of them is unable to delete the folder, I must add that this folder contains a few other empty subfolders. I even try to delet it in safe mode, but I can't. my pc has windows vista Home premium.

  How can I remove this folder completely?

  Kind regards.

  Ali

  I don't know what to do with the ownership of an item.

  In the tutorial...

  First step is to add Take Ownership option to your context menu.

  Two ASEO is to show you how to use it.

  First step is self-explanatory.
  Second step is... right click on the file/folder you want to delete > click appropriate > a black and white screen flashes for a second or two and disappear > now do a right click on the folder/file/new > click on delete.

  I hope this helps. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error code 0 x 80070570 when deleting a folder empty

  I created a new folder in my HARD drive. But unfortunately once I tried to delete this specific folder that was created and not necessary now, I found it cannot be deleted. The folder is empty, and when I try to delete error code 0 x 80070570 appears and says that "the file or directory is corrupted or unreadable." But I can get inside the folder and see which is empty. What should do?

  Hello

  Thank you for contacting Microsoft Answers.

  Computer-> right click the disk partition hard-> click Properties-> go to tab tools-> click on the "check now" button to check your hard disk for errors.

  After it is completed, restart the system and then try to copy or delete the files again.

• Cannot delete files in the folder empty my RoboHelp projects.

  RoboHelp 2015 (12.0.2.384)

  Cannot delete empty folders. I get an error message "cannot find this item. Tried to remove from the project manager, Explorer and BACK.

  He eventually managed to delete this folder. I had to go back and find the hidden folder and delete it. BACK in fact my headache. I have used FileZilla because our company does not allow us to install whatever it is untrusted. I believe RoboHelp must do something under the covers and was a reference to that folder that I couldn't find.

• The attributes of the element list empty when adding attribute #FROM_ROLE to the message (Type CREATEPO element)

  I'm customizing item type CREATEPO adding a new notification with the corresponding message and I am facing a problem with the workflow designer (using the v2.6.3.5.0 Oracle workflow Builder).

  This notification must have a specific sender, which is already stored in a custom element attribute.

  According to the developer's Guide, I add a new message attribute with the internal name = "#FROM_ROLE" for the new custom message.

  I put all the remaining data, according to the instructions of the Manual: Type = role, source = send, full name and description = ' role', default = attribute Item type.

  But when I try to set the default value, the list is empty and I can't choose any attribute of the element.

  I tried to define a new message in other Types of items, such as REQAPPRV, and in this case, the list of attributes is displayed correctly.

  Any idea or solution?

  Thanks in advance,

  David

  I already solved the problem.

  So that the attributes of the element to appear as default values for the attribute Message #FROM_ROLE, they must also be of type role.

• Problem with pushing the attribute child xml to an empty array

  Hi guys,.

  I have another problem with the bet, or should I say, pushing data from an xml file to an empty array, as I stated earlier.

  During the xml_mc.onload, I can see the data, but after that, it becomes undefined.

  It seems that I couldn't find the solution on the net as well. I suspect that's not possible, but I'm not giving up.

  Please help me.

  Thank you.

  This is the code example:

  var monTableau = new Array();

  var xml1:XML = new XML();

  Xml1.ignoreWhite = true;

  Xml1.onload = function (success: Boolean) {}

  {if (Success)}

  var nodes = this.firstChild.childNodes;

  for (i = 0; i < nodes.length; i ++) {}

  MyArray [i] = nodes [i].attributes.name;

  }

  Text1. Text = MyArray [2];  to check if the 'name' attribute is visible

  } else {}

  trace ("could not load the XML");

  }

  }

  Xml1.load ("icons.xml");

  Text1. Text = MyArray [2]; I commented on the first text to try to display it again, and the result is not DEFINED...

  the XML would look like this:

  icons. XML

  < icons >

  < name of icon = "icon1" / >

  < name of icon = "icon2" / >

  < name of icon = "icon3" / >

  < name of icon = "icon4" / >

  < / icons >

  Thank you

  I do not understand your problem.  Table fill with data.  If you expect this second "text1.text ="show another thing that 'no set', it won't happen as you wrote it. "  This line of code is run before the onLoad function (code execution does not wait for loading files).  You want only to deal with the processing of the data, once the onLoad function he treated in the table.

• How to copy *.jpg in a folder empty

  10.6.8 using

  I have connected my (Moutrie) USB camera to my computer.  I have the camera set to save jpg files and avi.  I have 500 files in the folder, 250 are in jpg.  I want to copy the jpg file to where I have a temporary folder.  BACK training, I don't know what to call things on a Mac, even if I use them for 8 years.

  In the Finder, under 'Locations' I of course desktop and Applications.  I also have the directory structure where I work, called "cglenn."  Under that, I have a temporary folder. The Moutrie is listed in the "Devices" box as moutriecam.

  I have messages in this forum, the closest, I came to reading: cp moutriecam/*.jpg ~cglenn/temp

  I tried without the tilda first.  In any case, so I don't know if the records of departure or destination (or both) are not typed correctly, the results say "no such file or directory,".

  If 'cglenn' is your user name, you must use "~ / temp ' where ' ~ / ' is a shortcut for/Home / or/Users/cglenn. Of course, I guess that the 'temp' folder is in your file.

• Reformatted a hard drive now in a closed Chamber. Not an assigned drive letter. Installation in a NTFS folder empty?

  Hello.

  I have a few external hard drives. I want them to be little permanent on my laptop or desktop for creating media. The only way seems to be to not assign a drive letter and let windows assign/change it a whenever I connect it or assign a drive letter or install it in a NTFS folder. Currently only disk management is recognizing the readers, because they are not assigned or mounted.

  I have a few questions about the editing of this property. I want to have several drives working independent of drive c as possible.

  If a folder is placed on the c drive: 1. how many resources are required by c-drive?

  2. what concerns me is: these devices should not access drive c. drive c. If the mounted folder still behaves like an extrnal device? Or is it considered an internal c drive folder/position?

  3. I want a usb2, usb3, firewire400/800 or eSATA connection to have the maximum speed, not to be a bottleneck in a c drive thinking that she keeps "access itself. I'd rather have a c drive do it of thing and pull of external device, its weight as it is supposed to independently (or "independently" keepingin mind records temp and temporary files, etc...).

  4 is it windows search for NTFS files if the device is not connected? I guess not, and I would get a message saying something like "cannot access this folder, no content inside" or "please connect the device to access the contents of folder and it is mounted. What concerns me is: sometimes my computer does not start up if all devices are not enabled (usually after an accident, mistake, bad closure or a change of equipment). For example: I need my printer usb2 lights sometimes, or I just get a black screen in these situations. Then I get all the usual startup screens, etc.

  My alternative is to connect specific devices in a specific order to every time I use my computers for the purpose I want. Speed is my main concern, but I know that sometimes I can not connect external in the order because of what I'm doing, travel or I want to conserve their life and do not plan their use.

  Thank you.

  It's just a mount point, a symbolic link to the external volume.  Readers will work like any other drive, but they are assigned to a path to the drive rather than a letter, below all the NT object Manager handles this as a drive letter, the C: drive will do nothing to hold or store the link.  In a sort of way, that it would not much more different to a regular shortcut to another folder on another drive on your desktop, the office is on the C: drive, but when you access the file on the other drive via the shortcut it does not affect the C: drive.

  John