FAX PROGRAM FOLDER EMPTY

Fax program folder is empty, and the original Windows XP disc does not load indicating the missing files. The file is looking for Windows XP Professional disc that I inserted every program disk that was provided with my computer.

Hello

·        Since when are you facing this problem?

·        Remember to make any change to the system?

If you are referring to the Windows fax service, then it could be that the fax is not added in your system. I suggest you follow the steps mentioned below.

a. Click Start, and click Control Panel.

b. click on add and remove programs and then click Add and remove Windows components.

c. place a check mark next to Fax, and then click Next.

d. then check at the starting location > all programs > Accessories > communications > you'll be the fax service is installed on the system.

Thanks and regards.

Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Infected by a virus and programs are empty

    I think we've got a virus. Of course, I can get on the internet, but in a weird way. My office is empty and "all programs" says "empty."  I need to try the system restore, but cannot access it. I've tried everything. I don't know that much about computers, but I'm trying to avoid taking it to be fixed.

    Try to run the restore of the system at the command prompt:

    "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
      <>http://support.Microsoft.com/kb/304449 >

    It looks like your icons are hidden.  Change your settings to show hidden files:
    Panel-> folder-> View (tab) Options
    Check the box "show the hidden files and folders".
    Uncheck "Hide protected operating system files"
    OK your way out.

    If you find that your files are hidden, and then right click on them-> properties-> uncheck "hidden". -> OK

    HTH,
    JW

  • program files empty after diversion

    My computer has been hijacked, all files were hidden. I think I fixed by passing through all the hidden files and unchecked, but now all my programes say they are empty. How can I get them back when I click on programes. I tried the system restore, but it is not one of a bygone era.

    Have you run any cleaning temp file? If you run any cleaners then unhide.exe should bring these programs shortcuts to files.

    Run Unhide.exe to remove the flags hidden files and folders.
    http://download.bleepingcomputer.com/grinler/Unhide.exe

    I wrote an article to EA about this infection which hides files and move desktop shortcuts and shortcuts startmenu of the program in the temp\smtmp folder.

    Use MalwareBytes if the infection is still active.
    Missing desktop icons - program files empty
    http://www.experts-exchange.com/A_6209.html

  • If I click on start, all programs, the list of programs is empty.

    If I go to the c drive and the programs folder, programs are still there and can be started, as all shortcuts are gone from the desktop. I beleave this is the result of a virus.

    Hi Joseph,.

    ·         What is the antivirus installed on the computer program?

    Check to see if the following is useful.

    Method 1: You can run the Microsoft Safety Scanner to check the infection by the virus. Check out the following link to do so.

    Microsoft Safety Scanner - free online tool for PC health and safety

    Method 2: Check to see if this article helps you to the question of the desktop icons.

    Your desktop icons are missing in Windows XP

    Method 3: You can install the patch according to the list of programs on the start menu.

    When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty

  • I need help for Windows Media Player to start after installation. I click on the icon and nothing happens. I have try the exe file in the program folder and still nothing.

    I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

    I can't get Windows MEdia Player to start once I install it. My PC crashed and I reinstalled XP Pro. and did all the updates that were needed. Then I installed Media Player 11 and tried to boot, and it wouldn't start. I tried to boot from the program folder files, and still he wouldn't. I uninstalled and reinstalled several times and sometimes it worked once after installation then once you close it never starts again. What should I do to make it work. I need my music and videos.

    ================================
    In some cases, there may be multiple instances of
    WMP running.

    Try to open the Task Manager and look for the instances
    from: wmplayer.exe and complete the process on each of them.

    Also... Take a look at the following article:

    (925704) when you try to use Windows
    Media Player 11, the program does not work
    Start or some user interface elements are empty
    http://support.Microsoft.com/kb/925704
    John Inzer - MS - MVP - digital media experience

  • Start "All programs" menu empty file (Windows Vista)

    All my programs on my menu start "all programs" folder disappeared. There are a few but those I recently downloaded. Accessories is not yet there. I searched all cases online to find the authors response to repopulate my all programs, but without success.

    I have restarted my computer several times. I did an analysis of checker (SFC) to file system. I ran a registry by Uniblue Fixer; I tried antivirus scans and analyses ad-aware; nothing seems to work. I still have all my programs and have lost but they are simply not easy access and I really want to take the time to build my own folder "all programs." I really want my old one back. But how?

    And P.S. I can't just restore because I never ran a backup before, so there is nothing to restore.

    Thank you!!!

    1.) open the path below, replace the {username} with your own login
    Start\program C:\Users\{username}\AppData\Roaming\Microsoft\Windows\Start
    2.) look if there is nothing there. If there is not something, it means it is initially empty. Meaning, it could have been deleted accidentally away.

    Recovery of most of them back
    1.) go to the path below, with a different name as {username} by default or user
    Start\program C:\Users\{username}\AppData\Roaming\Microsoft\Windows\Start
    2.) copy them through your way with your {username} don't forget not to vote also useful for others and to accept the proposed response, if it is relevant build it KB in this Forum.

  • I need to uninstall 4.0 beta 12... but he does not appear in my Uninstall list... but I see it in my programs folder...

    I need to uninstall 4.0 beta 12... but he does not appear in my Uninstall list... but I see it in my programs folder...

    Remove the Program Files folder.

  • XP SP3 start/programs is empty after cleaning a Trojan infection

    Windows XP SP3, all updates.  After cleaning a Trojan horse infections now start/programs shows 'Empty' and all the quick start icons are shown is no longer.  Y at - it an easy solution for this in addition to repair or reinstall windows?

    Have checked all that applicable registry files, machine and user and registry values show correct as

    KB886549.

    FYI, logged as administrator.

    Check these:

    http://WindowsXP.MVPs.org/startmfu.htm

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;292504

    http://WindowsXP.MVPs.org/AllPrograms.htm

  • where can I find windows fax programs

    I was reading that windows has a fax program to send and receive faxes, but I can't. I followed the instructions on how to enable and configure the xp fax service and nothing happened

    Try the Control Panel / Add/Remove programs. Click windows add/remove components.

    Check fax services. Then, you must add the files for it. Then go to the menu / menu Accessories / Communications menu. Under the fax

  • I lost the Microsoft Fax program.

    I had a few problems with the Microsoft Fax program, so I thought that I turn it off and then turn it back on to see if that solves the problem.  However, after going to control panel, Add/Remove Programs/...etc.  I found that it removed the program completely and I can't put it back on.  Now the problem is compounded by the fact that when I bought my computer came with Windows XP on it, it has not come with installation CD MSFax is available for download on the internet?  All the Fax I see available for download are either expensive programs (and I use everything as often a Fax) or they have a very low limit as to how many you can fax.  How can I get for my WinXP installation discs?

    I had a few problems with the Microsoft Fax program, so I thought that I turn it off and then turn it back on to see if that solves the problem.  However, after going to control panel, Add/Remove Programs/...etc.  I found that it removed the program completely and I can't put it back on.  Now the problem is compounded by the fact that when I bought my computer came with Windows XP on it, it has not come with installation CD MSFax is available for download on the internet?  All the Fax I see available for download are either expensive programs (and I use everything as often a Fax) or they have a very low limit as to how many you can fax.  How can I get for my WinXP installation discs?

    If you do not have a Windows XP installation CD, you can have the files on your hard drive in C:\i386 or C:\Windows\ServicePackFiles\i386

    See the frequently asked questions 1 and 2: http://members.shaw.ca/bsanders/FAQFAX.htm

  • How to remove a folder empty on the desktop

    I created a folder empty to use on my desk and not use it. Now I can't delete it! If I delete, or drag to the trash, it disappears. But he's back on the desktop the next time I turn on the computer. I want to remove it permanently - how should I do this?

    Hello

    Please proceed with loading safe mode and delete the folder from your desktop.  This should take care of this for you.  I hope that this information is beneficial.

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • What is subfolders with blue colored letters in my program folder windows that look at this $ $MS13Uninstall_kB893803v2?

    I want to know what are subfolders with blue color lettrers in my program folder of windows that look at this $ $MS13Uninstall_kB893803v2.

    These files contain data for uninstall programs and updates.

    they are created during the installation of the programs and updates and contain a card to the back/improper installation.  so if the uninstall files are deleted manually, then the system loses the ability to uninstall all files and registry keys that have been installed.

    so for the example provided in your thread topic, that particular file refers to the kb893803 and you'll find probably listed as a windows update in afforestation programmes.

    You can also search the Web for more inforamation on that Ko.

    DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

  • Fax program does not open

    My fax program just stopped working (Dell PC Fax). I tried to reinstall the program and many other things. I did change anythin on my computer except the re-registration of Norton, who has since been removed and replaced by McAfee.
    When I try to open it, it says just 'Dell Fax Solutions Software has stopped working' and a 'problem' bring it to stop working.
    As far as I can tell it is said the fm3032d.dll is absent, but it is installed on my computer, I show.
    Thanks for your suggestions.

    Hi scottishpony,

    Please use the forum for Support of Vista,

    When you remove Norton, it is recommended to download and run their removal tool to remove all remnants of Norton on your computer components before installing another antivirus.
    Your Dell's Fax program, you should completely uninstall it, reboot, and download the latest version of Dell and reinstall it.  Contact Dell to rely more on software provide by Dell for more support.

    Let us know if it works, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HOW DO REINSTALL YOU THE FAX PROGRAM IN WINDOWS 7.

    HOW DO REINSTALL YOU THE FAX PROGRAM IN WINDOWS 7.

    Windows Fax and Scan is added or deleted in "Control Panel |" Programs and features. Turn on or off Windows features. Printing and Document'; Uncheck the box to remove the feature, add a checkmakr to add it.

    HAL
    --
    HAL Hostetler, TCE
    Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
    www.kvoa.com - KVOA television, Tucson, AZ.
    Live Hot Licks - www.badnewsbluesband.com

  • I installed Visio, but the application does not appear in my programs folder.

    the exe is installled but I can't find the Viewer

    the visio program does not appear in my program folder.  the download worked successfully, but when I double click on visioviewere.exe, I never see the instructions to complete the installation

    Hello

    1. what version of Internet Explorer is installed on the computer?

    2 are you able to install other applications without any problem?

    3 did you last modified the software on the computer?

    Method 1:

    I suggest you try to install the application as an administrator. Right-click on the .exe file and , click Run as administrator.

    If this does not help, go to the method 2:

    Method 2:

    You can run the FIXIT and.

    Cannot open. Files EXE in Windows 7 or Windows Vista

    http://support.Microsoft.com/kb/2688326

    You can also try the manual steps but remember to back up the registry before do you.

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Method 3:

    You can also run the FIXIT and check if it helps.

    Solve problems with programs that cannot be installed or uninstalled

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    See also:

    Change the programs that Windows uses by default

    http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

    Hope this helps and keep us posted.

Maybe you are looking for

  • How to midi playback?

    I have connected my Korg Triton to my (Focusrite Scarlett 2i4) Audio interface with a midi cable. When I create a midi track, I am able to hear the sound, I chose on my keyboard and can also hear when I record but when I try to play back I get nothin

  • Protocol of communication for NI 9222

    Hello I can't believe I have to ask this question, but after extensive research, I thought I must ask - sorry for this simple question. I just got my NOR-9222 and NOR-9263, they come with a VGA port. Then, how should I connect it to my PC? It is diff

  • Update for Windows 7 Service Pack is not installed properly

    Mocrosoft Office Suite 2007 Service Pack (SP2) can't seem to install

  • Code 31, for my 2 GB USB - stick USB Device Manager,

    Hello world I use a HP pavilion a610t, 32, Vista premium edition, 2. 4 g, 3 G of ram, w, 4USB ports. I installed a gang self-powered USB 2.0 w/10 usbs, sometimes it turns on at startup, sometimes not and I re - plug for my system to recognize. I don'

  • Settings App Walkam/old music

    A quick question here,Where can I find (if I can) an option to display the lyricks music as it was on the old Walkman App, I see not anywhere in the application of music, has it been deleted recently, or after update Lollipop?