How to configure rules? I can't get it work
I tried following the instructions but when I click to send mail in the selected folder, nothing happens.
I have to be able to get the rules to work if I will continue to use Thunderbird
Select the filter that is causing the problem, and then click 'change '.
Post a screenshot of the window 'filter rules.
Tags: Thunderbird
Similar Questions
-
How can I get Jabber works on iPad without CUCM?
Nice day
Question: How can I get Jabber works on iPad with TMS and VCS instead of CUCM?
Material: TMS 14.5 with VCSC/VCSE X8.2.1 and TMSPE 1.0
Rarely Jabber is used on an iPad here for the last time we tested, it was probably more than a year and it worked great. I have a new request if and when you go to the store I notice the previous product working is no longer available and has changed for Cisco Jabber 11.0.3. I feel that this only works with CUCM.
Can someone tell me if it is possible to get this new application running without CUCM and rather through VCS /TMS? I tested a variety of attempts to connect to the new application and they are all lead to not being able to find a server. Cisco documentation is a bit complicated on this issue so I'm hoping someone here might have some experience with this.
Any help is greatly appreciated.
Thank you
MikeThe customer you are looking for is 'Cisco Jabber Video for iPad', which is what Jamie refers in its response.
However, the Jabber video for iPad is therefore more available for download, as it's end-of-sale (eos-eol-notice-c51-732786), this is because Apple requires that all their applications must be 64-bit, and it was not possible to update Jabber video application as 32-bit based. In addition, in the case where you have the video Jabber for telepresence (Movi) customer is also EOS (eos-eol-notice-c51-732787).
Replacement for both video Jabber clients products are Cisco Jabber client (that you mention at the end of your message) with CUCM only, as call manager is management that moves to Cisco for call control.
-
I use the free trial version. I try to print an Applitrack online application. He said that I should print preview it. It does not work. How can I get it works. Help. I'm afraid that my request will be not visible to employers.
If it is an Acrobat, who never had a print preview, because the PDF screen is an overview of what the prints.
-
my cloud is empty, NO photoshop. How can I get my work when I can't open photoshop?
have you installed the application from office cc, https://creative.adobe.com/products/creative-cloud
If so, when you open it you will see a white screen? If so,.
First, close your office cc application.
then, rename the opm.db file by:
Navigate to the OOBE folder.
Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
Mac OS: /users/
folder/Library/Application Support / Adobe / OOBE and rename the file opm.db in opm_old.db, for example
Finally, launch your cc desktop application.
If this does not work: https://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
-
The HD I had my installed Photoshop has now died. I now work with another HD and reinstall Adobe Photoshop. I had paid about $10 a month. How can I get Photoshop working in my computer, but in a new HD? Thank you, Pablo
Hello
In order to download Adobe Photoshop, you need to download the desktop app creative cloud first.
You can please apps download Adobe Creative Cloud | Adobe Creative Cloud free trial
After downloading the desktop application, you can download photoshop through it.
Kind regards
Sandrine
-
NB100: How can I get ACPI working under XP
Hello world
I wonder how I can get ACPI working under XP.
When I enable it in the BIOS, Windows will not start... Should I load the drivers during the installation of Windows XP? That would lead me to my next problem, because the command line switch - one for the extraction of the driver does not work... Does not extract the files either.Or y at - there a way to add ACPI to my XP install is already running (the BIOS ACPI option is currently set to "compatibility"?
Thanks in advance!
As far as I know before enabling ACPI in the BIOS, you must remove the standard PC driver in Device Manager and install the ACPI driver.
Then go into the BIOS, turn it on and should start Windows.In the Microsoft Knowledge Base, I found an article on the ACPI Compatibility:
http://support.Microsoft.com/kb/314088 -
After having tried to log in to hotmail using my email address: * email address is removed from the privacy *, he know that my account has been blocked because someone has entered the wrong password too many times.
It seems absurd, because even if someone tried to hack my email account, they don't have, which is good, but bad at the same time. Bad because now my account is blocked and I can't get back in it.
I did a forum on the Windows Live Solution Center, under the wire "account password recovery - * address email is removed from the privacy *", but for the moment, have not heard anything back from it.
If I log in on Windows Live Messenger, I get the error code: 80048823.
Someone who knows what they are doing could help me please? I did what Hotmail apparently called 'customer support', tried to call the Microsoft call center and tried different ways of trying to get my account reinstated... Nothing worked!
Someone help me please. I'm desperate to get m has come back, because it is essential for my communication and commitments of the word that I have this account upwards and running.
Please, please, please and thank you.
Try asking in the appropriate forum:
Submit all Live and Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
How can I get Canoscan9950F works with windows 7
"The scanner have kontakt with the computer, but in the program" Windows faxand scan "have I not this message - no scanner have disovered.
Hello
Welcome to the Microsoft community!
You cannot use the scanning device in the computer.
To work with the issue, I suggest you follow the steps mentioned.
Method 1: run it Resolution of hardware problems and devices
See the site:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: Update the drivers
See the site:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
You can also get the latest drivers on the site:
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
How can I get it works on chrome
I can't get this to work on Chrome.
That is right. Google (the creators of Chrome) decided to block all add-ons and have only their own PDF Viewer.
-
Hello I'm here to ask another stupid question.
I can run my code very well but can not get the debugging work. When I click on debug that code runs immediately but in flash builder it says launch ProjectName (percentage)
and it takes quite awhile ~ 3-4 minutes and then I get the error message
Unable to connect; session has expired.
Ensure that:
1. you compile your Flash application with debugging on.
2. you run the debug version of Flash Player.any ideas?
Hey chris,
from the looks of it, two things can be wrong here. check your debug configurations and search two fields for the IP address and the IP address of host debug. Was that changes of IP address of your host (DHCP) and you need to update periodically in your flash builder settings. You can check your IP address using your command prompt and appropriate controls (ipconfig / ifconfig). Good luck!
-
Tecra S2 - can't get his work on Windows XP
Hello
I have a Tecra S2 as a Satellite L30. Both had shattered by a virus last week that brought me to completely format the two machines and re-install XP on them.
I had a lot of bring them up to speed (including service pack 3), however I for the life of me can't sound to work on one of them?
I downloaded and installed every update of the driver on the site of Toshiba (mytoshiba.com) without success. I did not do anything with the last update of the BIOS, I do not know too well how this works and do not want to fail it.
Any ideas on how to solve this problem would be great!
Hey Buddy,
As far as I know, you need to install SP3 before installing the audio driver because it contains an important update for sound cards and drivers.
So if you have installed the sound driver before SP3, remove the driver and install it again. It should work
-
Satellite L500/01F and Win7 - can't get the working FN keys
I have a Satellite L500/01F and performed a clean installation of windows 7.
All right, except that I can't get the FN keys work.Is there a certain driver I can download for this problem? Thank you
Have you installed package of added value for Win7 offered for your laptop model?
-
I can't get ProRes work in first Pro CC
I recently bought a subscription to Adobe Creative Cloud for my 13 inch, Macbook Pro retina end 2013 race, new Mac OS X Mavericks (10,9), after using the CS6 on my old mac. I made sure to install the ProRes codec on my new computer, but I can't get Adobe first Pro CC or Adobe Media Encoder CC to recognize the codec. I installed the version 1.0.3 ProApps QuickTime Codecs and managed to make it work with the Quicktime software many Blackmagic. Both Adobe Premiere Pro and Media Encoder does not give me the option to export to ProRes and try to import a video file using ProRes in one of these applications, it doesn't matter that the audio. I tried everything I could think of and found online, but nothing has worked. Can someone help me get the ProRes for work?
OK, this problem has been corrected in Premiere Pro 7.1. If you encounter this problem, be sure to update.
EDIT: Ok, so the importer has been fixed; I can not even export to quicktime. I submit a bug report because the forums were completely unnecessary. Thanks for nothing Adobe.
-
I use a WRT54G Router I've had for almost two years. It has the original firmware (v1.00.6, January 20, 2006) and worked perfectly, since I installed it. Both of my two children (18 +) have NOW laptops, which they keep in their room, and I have problems with them staying up for most of the night on facebook or myspace, when they have to sleep. I tried to just disable internet from 12:30 to 07:30 with access restrictions, but can't make it work little matter what I do.
I use only one policy (called nolatenights). I checked the
button and the button, left the button checked, selected the button and selected, the time from 12:30 to 07:30 as the time setting. I tried entered the MAC addresses of the two computers and set the "IP Range" of the "102 ~ 109. BTW, I also have the "Wireless MAC Filter" active and the value of «Authorize only the computers listed...» » What I am doing wrong?
-
I can not get my work window Defender
I hit the defender of the window and I can not go to work it says contact your computer peron and he says to activate Group Policy
Hello anonymous 334,
Thanks for posting on the Microsoft answers Forums.
Make sure you have Windows Defender active:
Open Windows Defender by clicking on the button start , clicking all programs, and then click Windows Defender.
Click on tools and then click Options.
Under the administrator options, select or clear the check box use Windows Defender and then click Save. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Do you have any other type of antivirus installed on your computer? What other security products are installed on your host computer (anti-virus, anti-malware, anti-spam, firewall, etc.)?
These can interfere and stop Windows Defender from work. I would try and disable the other product temporarily and see if Windows Defender starts.When you enter the Services (services.msc), the Windows Defender service applet is listed for the automatic start mode? This is shown as disabled, then it never starts.
If it is shown as currently stopped (with automatic or manual startup mode), can manually start you it?You have errors where the viewer in the application log dealing with Windows defender? If so, then that can give you a clue as to what is perhaps the problem.
If please reply back and let us know the results of your tests.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
How can I see content secure?
I am trying to view video content integrated into my site employers and said I do not see it because it is 'safe' and I need to "view all secure content" but I have not a pop-up asking me about it and can't seem to find how to "turn on". Please can y
-
500-420qed Pavilion: PAVILION 500 420 DESKTOP HARD DRIVE REPLACEMENT
Hello It seems that the hard drive in my almost new Pavilion (just after the warranty) 500-420qe is out. When I turn it on, I can hear it but the screen goes black. I ran diagnostics and got a FAILURE for Hard Drive short DST hard drive 2. What size
-
Satellite P10: what do I have to use the Wlan?
I had just a P10 (barely used) and would like to know what equipment I need to set up the wireless part? Thanks much for any help. oldsmudger
-
Palm pre 2 stuck on the hp logo
I had a problem with palm pre 2 (2.2.4). I use it in India. Now, he has been slain at the hp logo and I need a procedure to get rid of this feature of evil.
-
Just made my first film on iMovie 11 to show the new apple TV. Worked well started a new project two days ago, but now when I try to open iMovie it starts with 'validation library iMovie on computer' and then seems to load the last project I worked