put db failed for "cannot allocate memory".
Hi exports BDB.
I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:
(1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)
(2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?
(3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?
(4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?
(5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?
BRS,
Min
Hi Min,
The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.
(1) the memory will be allocated heap if you have not defined a function alloc.
(2) all databases in an environment share the same cache (16 m here).
(3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.
(4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:
https://forums.Oracle.com/thread/2560134
The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.
To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.
Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.
This thread can help you on this:
https://forums.Oracle.com/thread/2557981
5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.
Kind regards
Winter, Oracle Berkeley DB
Tags: Database
Similar Questions
-
Cannot power on VM - cannot allocate memory
I started to see this random question on VM on our companys (3 guests) ESX cluster. I had to stop working on this cluster until we can solve the problem
I encountered a similar problem before that related to snapshots, but this problem occurs on machines that have ever been instant and in the past, had been working perfectly.
An excerpt from the log file of the VMware virtual machine:
2013 07-09 T 00: 41:32.918Z | Worker #0 | I120: DRIVE: OPEN scsi0:0 [' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' persistent R]
2013 07-09 T 00: 41:32.918Z | Worker #1 | [I120: DRIVE: OPEN scsi0:1 ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' persistent R]
2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: FileIOErrno2Result: unexpected errno = 12, cannot allocate memory
2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: AIOGNRC: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (c0002) (0 x 2013).
2013 07-09 T 00: 41:32.919Z | Worker #1 | I120: OBJLIB-FILEBE: FileBEOpen: unable to open ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot allocate memory (786435).
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1-flat.vmdk ': cannot open (cannot allocate memory): ObjLib_Open failed. Type 3
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LINK: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-STRING: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': cannot open (cannot allocate memory).
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DISKLIB-LIB: Failed opening ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' with flags 0xa cannot allocate memory (786441).
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: DRIVE: cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ': failed to allocate memory (786441).
2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': open with success (10) size = 53687091200, hd = 3565896. Type 3
2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-DSCPTR: open [0]: 'JD-5-Manager - flat hard' (0xa)
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: Msg_Post: error
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.literal] cannot allocate memory
2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LINK: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (0xa): vmfs, 104857600 sectors / 50 GB.
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager_1.vmdk ' or one of the snapshot disks it depends on.
2013 07-09 T 00: 41:32.920Z | Worker #1 | I120: ----------------------------------------
2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISKLIB-LIB: open "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" (flags 0xa, type vmfs).
2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DISK: disk ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk ' a UUID 60 00 c2 9 c cf e7 7A d0 - c9 a4 f2 29 3f 42 e7 e9'
2013 07-09 T 00: 41:32.920Z | Worker #0 | I120: DRIVE: OPEN "/ vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager.vmdk" Geo (6527/255/63) BIOS Geo (0/0/0)
2013 07-09 T 00: 41:32.933Z | VMX | I120: DISC: discs of opening had 16 ms.
2013 07-09 T 00: 41:32.933Z | VMX | I120: Module DiskEarly market failed.
2013 07-09 T 00: 41:32.933Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0
2013 07-09 T 00: 41:32.933Z | VMX | I120: scsi0:0: numIOs = 0 numMergedIOs = 0 numSplitIOs = 0 (0.0%)
2013 07-09 T 00: 41:32.933Z | VMX | I120: Closing of disc scsi0:0
2013 07-09 T 00: 41:32.933Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/51afe5a5-0bf2a06a-2bd9-842b2bfe9c89/JD-5-manager/JD-5-manager-flat.vmdk ': closed.
2013 07-09 T 00: 41:32.937Z | VMX | I120: WORKER: asyncOps = 3 maxActiveOps = 2 maxPending = 0 maxCompleted = 2
And the vmdk disk file:
# Disk DescriptorFile
version = 1
Encoding = 'UTF-8 '.
CID = 4ed52c7e
parentCID = ffffffff
isNativeSnapshot = 'no '.
createType = "vmfs".
# Description of the measure
RW 629145600 VMFS "JD-5-manager_1 - flat hard."
# The database disk
#DDB
DDB. Deletable = 'true '.
ddb.virtualHWVersion = '8 '.
ddb.longContentID = "8264138edeb9f6fb2afaf3be4ed52c7e".
DDB. UUID = "60 00 C2 98 c9 03 10 f9 - 19 1A 34 a1 ba e3 1 c c3"
DDB. Geometry.Cylinders = "39162.
DDB. Geometry.Heads = "255".
DDB. Geometry.sectors = "63".
ddb.thinProvisioned = '1 '.
ddb.adapterType = "free".
As you can see that the parentCID is the correct setting for a vmdk with no snapshots.
Tips to solve this problem?
Thank you kindly.
After asking, I checked the vmkwarning log and found the following:
/ var/log # tail vmkwarning.log
(2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand
(2013 07-09 T 01: 10:13.901Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa
(2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand
(2013 07-09 T 01: 10:13.920Z cpu14:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa
(2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend
(2013 07-09 T 01: 10:14.010Z cpu2:325385) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP
(2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot extend
(2013 07-09 T 01: 11:03.238Z cpu0:326782) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) ISP
(2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 2638: bunch vmfs3 already reached its maximum size. Cannot expand
(2013 07-09 T 01: 19:39.291Z cpu13:327237) WARNING: bunch: 3019: Heap_Align (vmfs3, 2099216/2099216 bytes, line 8) fa
Which leads me to the following VMware KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004424
Using PowerCLI, I checked the total size of all the VMDK files on a member of the cluster with the following command:
PowerCLI > Get-hard drive - Datastore
|-ExpandProperty CapacityGB select | measure - sum - ave - max - min County: 78
Average: 197.730180789263
Sum: 15422.9541015625
Maximum: 544.49609375
Minimum: 50
Property:
According to this article, the maximum size supported all open VMDK files was only 8 TB, so I was much higher than that, so fall on issues.
I adjusted the VMFS3. MaxHeapSizeMB at the maxmum 256 MB to compensate and that solved this problem.
-
db_load error: cannot allocate memory
Hello
When I try to import a dump file, I always get this error:
db_load: BDB2055 lock table is out of available lock entries
db_load: cannot allocate memory
I performed "db_load f outdb/outdb2 - h env xass.db".
and I put max locks:
dbenv-> set_lk_max_locks (dbenv, 1000);
but it does not work.
What should I do to avoid this problem?
Thank you for your help in advance
Mark
Update:
I did some tests, and I found that if I increase the number of locks by 'set_lk_max_locks' in the DB_CONFIG file, db_load operation will be a success.
The point is that the larger db file may need a very high value of locks, then why "db_load" does not release the locks during the ongoing procedure? Is this a bug for the bdb?
because I can not increase the infinite number of locks!
If this is not the case, How can I cause "db_load" release of transaction locks?
Is someone can help me?
Mark
Hi Mark,
If you import a dump file into an existing, open environment with flags of (can be several) DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN, then it is true, you may encounter the error on "lock table is out of available lock entries" when the dump file is very large. Db_load process will not release the locks because he have to provent other processes to access the database under construction to ensure the consistency of the data in the transactional environment.
The general average to load a database from a dump file is to specify an empty directory as the base directory. Hereby, the database will be created in a private non transactional environment, and you can copy the database in your environment running once completed the process of db_load.
Kind regards
Winter, Oracle Berkeley DB.
-
AMT: cannot allocate memory - is there limit to the databases on a single box num
Hello
Specification of the server:
Windows 2008 R2 x 64 with all updates applied
Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
10 GB OF RAM
I have a standby server that has all my databases to watch over him
Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
If I withdraw half a dozen databases in the scripts, it starts working again.
I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
I reorded the data bases in the script and it still fails at the end, not on a specific database
I also added restarts listeners for scripts that made no difference
I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
Thank you
RobertHave you tried a note
AMT-12531 on Windows 64-bit [ID 1384337.1]
I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.
-
Fehler beim co-chair der speaker: 12 (cannot allocate memory)
Hello
We have a big problem with one of our virtual machines.
We use Symantec BackupExec 2014 and this seems to cause huge problems with the VMDK files.
The thing is, this special VM has thausands of disk files vmdk divided into blocks of 4MB.
Makes this virtual machine is so slow, that we were unable to work with her.
So, what you do everything first? right... try to turn...
But this time: ERROR. Nothing happens. The machine does not start.
I would try to take a look at the vm-folder on the volume of SAN. But even here, nothing happens. just of hundreds of «...» »
So I tried to download the whole file. Here, I recognized on the thausands of vmdk files. After that, I cancelled the copy and began to consolidate the disk files.
After 4 and a half hours (every 10 minutes he took a step forward 1%), the system has halted the process with 12 error (cannot allocate memory)
I tried to find a solution on the web. But nothing about this kind of problem again.
does anyone have a tip? Or better, a solution that would be the next us?
Thanks in advance
Hackert
Der Versuch die Maschine zu clones ist eine gute idea zweifelsfrei. Klappt ist alles ok Wenn wenn nicht - durch die grosse Anzahl der Snapshots - muss die Kommandzeile und ein wenig Handarbeit hold. Es gibt Kommandozeilen VMware-Tools die yesterday used werden können. DAS sind vmkfstools (as ESXi und/oder vmware-vdiskmanager as VMware Workstation.) The VMware KB article http://kb.vmware.com/kb/1004545 shows wie das in meherern Entert gemacht werden kann, wenn die Anzahl der zu gross wird und nicht mehr works etc. clones Snapshots. Important ist dabei eine der Daten zu haben current safety, falls was dabei schiefgeht.
André
-
I tried to run a simple workflow in vCenter Orchestrator (VCO) which accesses the command prompt by using this script:
var myCommand = new Command ("ls");
myCommand.execute (true);
System.log (myCommand.Result);We use VAPP VCO and we continue this error:
"Wrapped java.io.IOException: cannot run program 'ls': java.io.IOException: error = 12, cannot allocate memory (Workflow: Test2 / Scriptabletask (item0) #1)"
Any suggestions? This script is copied and pasted directly from the VCO manuals, where our confusion.
Have you tried to increase the memory of the virtual machine?
I assume that you already have tried to restart the virtual machine without increasing the memory, just?
Christophe.
-
Help. Error "cannot allocate memory".
Hey all,.
I tried a search first, and I tried google. I have to look at a PC that has CS5 or CS5.5 tomorrow, it runs Windows 7 64 bit with 16 GB of Ram.
The error given is:
"Cannot allocate 0.000 MB of memory. Or decrease memory for rendering of the framework requirements
or install more RAM. (Object 123803/U.Mem) »
And I have no idea.
I suspect, it might be in the way that there AE set up, but wont know until I see the machine. Any suggestion is appreciated.
See you soon
The after effects CC (12,2) update solves this problem.
Let us know how it works for you after installing the update.
-
"Cannot allocate memory" popup on Quit
First visit here, and hoping someone can help...
Creative cloud according to update my installation of After Effects to v12.1.0.168 today, I now have a frustrating dialog box that opens whenever I left... any ideas? This was not the case before AE has been updated and it happens even if I have no other applications running. My system is a fairly standard mid-2011 iMac - i7 to 3.4 GHz, 16 GB RAM with AMD Radeon HD6970 2 GB - and I am still currently under OS X 10.8.5.
Another novelty is that if I double-click a project file in the Finder to launch After Effects, the project is open, only the application.
I tried to restart, repair permissions and also downloaded the update 12.1 and re-installed just in case there was a problem with the CC download, but all without success
The after effects CC (12,2) update solves this problem.
Let us know how it works for you after installing the update.
-
Cannot allocate 0.000 MB of memory.
I keep getting this message while he was working on a project in AE.
"Cannot allocate 0.000 MB of memory. Decrease memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)"
I deleted the cache in AE and premiere. I left first and the TEA so that EI is the only thing running. I even reset the pram Mac, but we are still receiving this error.
I am running Adobe after effects CC 2015.3 (13.8).
OS X Version of Yosemite 10.10.5
iMac 27 inches, end of 2013)
Treat 3.5 GHz Intel Core i7
16 GB 1600 MHZ DDR3 memory
Macintosh HD boot drive
Graphics NVIDIA GeFroce GTX M 780, 4096 MB
Please let me know if you need more details, and I'll be happy to provide.
Thank you for your time and help in advance. Any suggestions are welcome.
Looking forward to you soon.
George
Hello
You may have a few third-party plugins that requires an update. Please check below the places and remove them to confirm.
1 MAC HD or startup drive > library > Application Support > Adobe > commune > Plugins > 7.0 > MediaCore.
2 applications > After Effects > Plugins.
Second, there are 5 default folders. So, remove everything it to check the cause.
Vinay
-
Cannot allocate 0.002 MB memory... I have 32 GB of RAM
Hi all
I've upgraded to the new version of After Effects 11/30 and I always get this message:
Cannot allocate 0.002 MB memory reduce memory for rendering of this framework requirements, or install more RAM. (12803 3D camera data / standard). For more information, see www.adobe.com/go/learn_ae_mem (5027: 3)
When I purge the cache of the memory and the disk is not much except change the error to a (0: 39) or (7: 5)
I went to the quarter to frame (10 x 15) custom resolution...
I have 32 GB of RAM and After Effects use 20-29 gb as seen on my application for management tasks on El Capitan.
It was produced after about 30 minutes of use with no problems. So if I saw my composition I get all these error messages continue to appear after I press ok making it difficult to work on my project. Finally, I restart my computer that solves the problem for 15-20 minutes until I need to redo a reboot.
For now, the only solution I've come across uses an older version of AE. It bothers me that this happens to the newest version that I prefer to work with an adverse event to date...
Best,
Danny
What is the exact version of 2015 for CC number that you use? There is a big difference in performance between 13.5.0 and 13.7.2!
How you establish previews? You have the cache before reading to checked in your preview? What are the parameters of your memory?
What version do you use that works correctly? (Full version number to please.)
-
After cc 12 and Maveriks: cannot allocate 0.003 MB memory.
Hello, I have problem with after cc 12 and Maveriks.
The problem is:
(76: 0)
Cannot allocate 0.003 MB of memory. Decrease memory for rendering of this framework requirements, or install more RAM. (12803 / text engine data). For more information, see www.adobe.com/go/learn_ae_mem
You know the problem?
waiting for response.
Thank you
The after effects CC (12,2) update solves this problem.
Let us know how it works for you after installing the update.
-
How to allocate memory for string
How to allocate memory in LabVIEW for char []?
The table is:
char ProjectName [260].
I still have 4 lu byte string Unflatten, suggestions?
TIA.
-
Failed to allocate memory (CC 2015.3)
Hi people,
AE is poping up the message, frequently update it can not allocate memory in different sizes (from 0.000 to 0.003 MB). Topic in the window is (§ 76 0) for 0.000 MB of memory or (5027 §3) when you ask 0.003 MB of memory.
I had the German version. Anyone with the same mistakes?
You can try this
Purge all the memeory and all the memory and disk CAsh to change-> Purge
Quit After effects and restart again.
-
3407: cannot allocate space to store the property information for global cache
Salvation of the experts on the issue of a load in ttisql as follows, statement
CACHE LOAD domain_group GROUP COMMIT ALL 256 LINES;
This exception is thrown, and I can't find anything with google:
3407: cannot allocate space to store the property information for the global cache groups because the space in the partition of the temporary data is less than the minimum threshold of 3000000 bytes--of the Member MG2_alone2_1 of the grid
My my_ttdb DSN is configed as follows:
[my_ttdb]
Driver=/home/TimesTen/TimesTen/tt1122/lib/libtten.so
Data store = / home/timesten/data/database / my_ttdb
LogDir = / home/timesten/logs
PermSize = 4000
TempSize = 32
DatabaseCharacterSet = AL32UTF8
OracleNetServiceName = amq_915
The result of cachegroups is:
Group cache CACHEUSER. DOMAIN_GROUP:
Group cache type: asynchronous, Writethrough global (dynamic)
AutoRefresh: No.
Breeding: LRU on
Table roots: GTLD_WHOIS_TEST. GTLD_DOMAIN
Type of table: spread
Child table: GTLD_WHOIS_TEST. GTLD_DOMAIN_STATUS
Type of table: spread
The County of gtld_domain table is 3,005 million records in the gtld_domain_status table.
Waiting for your help, thank you.According to the error message you need to increase the temporary data partition which is the TempSize setting in your DSN.
As point of departure set to 1000 and then to monitor it in ttIsql with the dssize command to see if it needs to raise more or may be reduced after a workload has been run.
Tim
-
Connection failed for an unknown reason (IOM Java Client)
Hello
I have some code Client Java IOM that works if I have access to IOM without SSL.
The problem occurs when I try another (production) server that uses the SSL protocol
I use these libraries
common - logging.jar
cryptoj.jar
EclipseLink.jar
JRF - api .jar
oimclient.jar
Spring.jar
WebServiceClient + SSL.jar
wlfullclient.jar
I also tried to add the system properties to add SSL debug, to ignore invalid host names, etc..
I also created a file of keys, certificates imported and added
System.setProperty ("javax.net.ssl.trustStore", KEYSTORE); System.setProperty ("javax.net.ssl.trustStorePassword", KEYSTORE_PASSWORD); opening of session System.setProperty ("java.security.auth.login.config", AUTHWL_CONF_PATH); System.setProperty ("APPSERVER_TYPE", "wls"); String ctxFactory = "weblogic.jndi.WLInitialContextFactory"; < String, String > Hashtable env = new Hashtable < String, String > (); env.put (OIMClient.JAVA_NAMING_FACTORY_INITIAL, ctxFactory); env.put (OIMClient.JAVA_NAMING_PROVIDER_URL, OIM_JAVA_API_URL); OIMClient client = new OIMClient (env); customer. Login (OIM_ADMIN, OIM_ADMIN_PASSWORD.toCharArray ()); URL of the IOM is referenced by intellectual property
The error message is not really help a lot. The green text was added by me.
User name and password have been double-checked, they work for the web INTERFACE.
javax.security.auth.login.LoginException : weblogic.socket.UnrecoverableConnectException : [connection failed for an unknown reason: < bytes garbage here >]
to weblogic.security.auth.login.UsernamePasswordLoginModule.login (UsernamePasswordLoginModule.java:194)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Method Native( )
at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke (Method.java:606)
to javax.security.auth.login.LoginContext.invoke (LoginContext.java:762)
to javax.security.auth.login.LoginContext.access$ 000 (LoginContext.java:203)
to javax.security.auth.login.LoginContext$ 4.run (LoginContext.java:690)
to javax.security.auth.login.LoginContext$ 4.run (LoginContext.java:688)
at java.security.AccessController.doPrivileged (Method Native( )
to javax.security.auth.login.LoginContext.invokePriv (LoginContext.java:687)
to javax.security.auth.login.LoginContext.login (LoginContext.java:595)
to Thor.API.Security.LoginHandler.weblogicLoginHandler.login (weblogicLoginHandler.java:61)
to oracle.iam.platform.OIMClient.login (OIMClient.java:212)
to oracle.iam.platform.OIMClient.login (OIMClient.java:196)
You cannot refer to the URL of the IOM by IP and use SSL. The host name must match the name on the certificate that will never happen if it is an IP address.
Maybe you are looking for
-
'DAC reference ground connection' property causes the other channel to stop working
Can I set allow connect DAC refers to a property on the ground on one channel and not the other? I have a channel of analog output of a card PCI-6251 set so the DAC reference can be set on the ground. I understand that this will work only if the refe
-
Need help to install KB979906 in Windows 2000 and Windows XP
Original title: need help various updates I need assistance with windows'xp Microsoft. NET Framework1.1 spI update security for windows 200 and WindowsXP {KB979906}
-
Media Player 9.0 has stopped playing DVDs
Windows XP Media Player 9 has stopped playing all commercial DVDs with message about multimedia digital protected. Restore the system back a month when it played DVD and by removing all updates Media Player does not help, same message. Tips on how to
-
Bars of green volume on my desk
I no longer get green on my Windows XP desktop volume bars when I change the speaker volume. What I did to suddenly cause this and how can I get back them?
-
Desktop shortcuts will not display or load correctly__
When I put any internet shortcut on the desktop by clicking load as the shortcut to printers.In addition, these shortcuts all have the same generic icon.only short cuts programme and demand loading with the correct icon.