Audacity won't record Platinum

Similar Questions

• my CD player repeat myself no CD not loaded but there is and it won't record from windows Media... Help

  my CD player repeat myself no CD not loaded but there is and it won't record from windows Media... Help

  Hello

  1. What is the exact error message associated with no CD loaded?

  2. do you mean to say Windows Media center?

  Perform the steps from the link below and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or any other programs (Fixit)

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/

  Hope this information helps.

• Win7 Audacity does not record sound

  I tried to follow the instructions at http://win7mag.com/?p=151 to use Audacity (and Audiograbber) to record streaming audio of IE8.

  All devices are including people with disabilities.

  However, WaveMix isn't a choice.  So I chose stereo Mix Reltek High Definition Audio as default device.  (actually I tried all the choices for recoding devices that did not not plugged in).  When I play using IE 8, I can hear music out of my speakers, but after hitting the record button in Audacity I just get a flat line (not its registered).  My sound card Creative SB X - Fi and driver update says I have the latest version of the driver (15/07/09 6.0.1.1323).

  Is it possible to use Audacity to record audio streaming in Win7 (fully updated)? Yes or no?

  If so, any ideas what I am doing wrong?   Thank you.

  I have a desktop with the card machine installed its PCI Express Sound Blaster X - Fi Titanium Fatal1ty Champion Series.

  I finally got the audacity to work.  I had previously run Windows Update and told me I had the latest drivers.

  However, when I ran Creative Sound Autoupdate we found a host of new drivers for my sound card software.  I have install 400 + MB of files.
  Now, there is no sound on the Windows Media Player.  I changed the reading to the speakers and record What U Hear and sound returned for the media player.
  AND Audacity recording the sound of the media player and its also aired continuously on the Internet.

  Hope this helps some body else.

• DVD - a 4 x speed CD drive DVD - RW Verbatim 4.7 GB won't record, said speed fast or slow, answers please?

  Have you tried the update of DEVICE ATA ATAPI IHAS324 Y but the software up-to-date.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Used speed, the actual brand of discs, burning and if file Live or mastered all come into
  play. A cleaning disc can sometimes help.

  Burning a CD
  http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD

  Disc burning: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Disc burning tips
  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-tips-for-Windows-7

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Format a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/format-a-CD-or-DVD

  Burn a CD or DVD in Windows Explorer
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Change settings for burning a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a DVD-video using Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

  Close or finalize a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

  ----------------------------------

  Excellent Forum for help with programs and CD/DVD problems
  http://Club.myce.com/

  ==========================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7

  
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My dvd player won't record

  Original title: dvd player

  My dvd player will not record. I know I'm doing something wrong. I've had a stoke in a year and a half ago. I'm sorry but I don't know what to do. Last week I couldn't remember how to print. Thank you for all that you do.

  Carl m Lee Jr

  http://support.Microsoft.com/mats/cd_dvd_drive_problems S.Sengupta Media Center MVP

• CD-Rom won't record a cd in the tray.

  My cd-rom tray register that there is a cd in the tray.  I've updated the drivers, and they are all the update to the latest version.  If you look under my computer the drive is there and I recently burned a CD okay. Help, please.

  My cd rom is a HL-DT-ST DVD - RAM GSA-H55N ATA Device.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Reference DELL E510 won't record sound from the microphone plugged into the rear microphone port

  What is the problem with this DELL E510?  I tried to record the sound of port rear mic on this machine with Windows XP and now Windows 7. (Previously, I had recorded my old Dimension 2400 without difficulty).

  The E510 (which was originally a Media Center Edition with Windows XP) but who now has Windows 7 Professional, Service Pack 1 shows the following messages after I launch audio troubleshooting:

  "Audio device is disabled." and also, another message saying, that at least one of the Windows Audio services and/or generating Windows Audio endpoint are not executed.

  I have all the correct settings of the sound and a microphone to work plugged into the microphone port back. Obviously, speakers are working correctly.

  Please notify. Thank you.

  Thanks for your reply.

  I have sound, only the inability to record sounds through the rear microphone port.

  Early yesterday morning, I dropped on a solution for the use of rear microphone.

  I plugged my microphone in the front Tower mic port.

  I downloaded the free version of "RecordPad Sound Recorder" AND can't seem to record my voice in the computer through the front mic port.

  No worries!

• VLC player and other applications won't record video correctly, only works for .mp4 videos.

  Hi, I have a problem with the video recording of vlc player and their opening upward. Once save the .avi video it doesn't give me the audio. It does not with .mp4, however. Which cuts and works fine when I play the video.

  He just started doing last week. I do gifs with clips and load it into photoshop.

  Even for other types of software, this thing of décolletage, it cuts fine .mp4, but once I try to cut the .avi, it becomes only the audio.
  I wonder is something wrong with my laptop and settings? I don't know how it would have changed. Or damaged something in my laptop.

  I have Windows 7.

  I really need your help.  Thank you!

  Emily

  Hello MIeXiHuanNi,

  Have you tried to post on the VLC forums to see if they have any ideas?
  http://Forum.videolan.org/
  You may also download additional codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Firefox won't record downloads for d:\downloads\temp as options page

  Until the recent (28.0) updates, firefox saved downloads by following the instructions, but now they have to save c:\users\***\appdata\local\temp.
  Now they are not

  Why?

  This can be corrected?

  dagbaruch:
  If you are using Windows 7 Home basic or Starter, please run Firefox "as Administrator". Then set the download settings once again.

• Satellite L650 - won't record discs

  Hello

  I got my Satellite L650 for about 6 weeks with no problems and now the first time I try to burn a cd it does not work. I've tried several programs, but all seem to give me a similar error.
  I captured the data from the main program I use IMGBurn.
  I tried to remove this device from Device Manager and deleting the upperfilters in registry.

  Any suggestions?

  The device information: http://imageshack.us/photo/my-images/641/capture2sb.jpg/
  IMGBurn error: http://imageshack.us/photo/my-images/833/capturefgy.jpg/

  Thanks in advance.

  Hi fridgeyeti,

  Why you have installed different burning software? Usually a single program is sufficient and that the previous user wrote at the end, nothing works if you install programs so much. It of also advisable to install a single antivirus only and not more.

  In your case I remove all burning software and install the latest version of your favorite program, but before installing it, run Ccleaner which s a freeware cleaning tool.

  Also remove the upper and lower filters in the registry as described here:
  http://support.Microsoft.com/kb/314060

• Satellite L650: Impossible to record with Audacity or free sound recording software

  I have a L650 and I can't save anything with Audacity or free recorder it only shows the Conexant microphone and line (WsAudio_DeviceS (1,2,3,4 and 5))

  If I record only from the Microphone Conexant CX20671 Sm

  I went into Control Panel and tried to update the drivers etc I am running Win 7 32 bit

  Hello

  Hmm, I think that's not possible because of the audio chip Conexant.
  As far as I know it supports stereo-in.
  I have a u400 with Conexant audio chip too and I can't record music using tool no. 23.
  But my other laptop A210 is favorable because it s equipped with the Realtek sound card.

  By the way; to be 100% sure that this is not available, you can check the Panel of-> sound-> the Read tab. Here, you must right click and should mark the option; view hidden devices, see the disabled devices.

• Impossible to record with Audacity

  Screen turns off after a certain time when no keys used - Audacity to stop recording?

  When you are recording in Audacity, the screen is blank after a few minutes, and the recording is interrupted. This means that I have to keep close to the computer and press a button from time to time. Any help would be greatly appreciated.

  Jim

  Maybe the problem is with your power management settings:

  The following article can offer a few ideas:

  Disable on Windows 7 or Vista power management
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-power-management-on-Windows-Vista/

• Sound recorder will not record more than a minute

  on xp sound recorder won't record more then 1 minute, how can I increse duration of registration?

  on xp sound recorder won't record more then 1 minute, how can I increse duration of registration?

  You can not.

  I recommend you use Audacity, a freeware sound editor who can do the job as long as you want. In addition, you can change the sound files after. Google for it. Also download the Lame encoder if you want to work with mp3 files.

  See you soon,.

  Jerry

• Problem recording ".dll" command prompt

  I am trying to save a file ".dll" (ntdll.dll) with command prompt.

  Whenever I enter the command 'regsvr32 ntdll.dll' in the command prompt, I get the error:

  "The module 'ntdll.dll' was loaded, but the DllRegisterServer entry point was not found. Make sure 'ntdll.dll' is a valid DLL or OCX file and then try again later. »

  How can I solve this problem?

  Just because a file has a .dll extension does not mean that it is registrable (sorry Microsoft committed Support Engineer 'experts').

  If the DLL does not have the regsvr32 program functions inside the DllRegisterServer() (and also DllUnRegisterServer()) don't know what to do with it - it does not make sense to save it so where the error message:

  the DllRegisterServer entry point was not found

  It was not because he is not inside the DLL you are trying to register.

  Once, it was suggested that the message should be replaced by something like:

  "Why are you trying to register this DLL? This is a standard Windows DLL, there is nothing to be saved"

  You can use something like DLL Export Viewer and search to see if you can find any where DllRegisterServer in this file (and will not) then the 'expert' can explain why they suggested the idea in the first place.

  

  Repeat the process on a DLL that is regsiterable as jscript.dll and you will find those that works inside so the jscript.dll file is recordable - no error no message there.

  

  So if someone advises you to register ntdll.dll, you immediately know a few things:

  1. they don't know what they are talking

  2. they have not re-created your question themselves and solved by saving the ntdll.dll file

  3. they did not attempt to their own advice to save ntdll.dll on their own system to see what is happening, or they know it does not work

  Instead of referring to one other topic more impossible to work advice, that Microsoft hired Support Engineer 'expert' Jayant Gupta should to is take 10 seconds and see what they are trying to save the file ntdll.dll on their own system of whey and when they see that it does not does not suggest that do you because it will not work for you either.

  Then when it does not explain why it works and give you a solution for how to register ntdll.dll but this will never happen because it's impossible.

  What you should do all your problem with AC3SP . EXE is look out in the community of UBI or steam, where your error is discussed and not follow the impossible to work the advice of Microsoft hired Support Engineer 'expert' to register a DLL that it is impossible to register.

  Now you have several committed Microsoft Support Engineer 'experts' giving you impossible knitting tips - save the ntdll.dll file... it won't work.

  This opinion of "experts" as if by magic won't recordable ntdll.dll file:

  Save the ntdll.dll (impossible)

  sfc/scannow (not the problem = I do not know what the problem is or how to fix it)

  Clean boot (does not have the missing function magically appear in ntdll.dll)

  New user account (the missing function will not magically appear in ntdll.dll).

  How these things will make a missing function appear in ntdll.dll?

  How much time have you wasted on this view of the "expert"?

  The error you see for AC3SP.exe "The procedure entry point RtlUnsubscribeWnfStateChangeNotification" means that AC3SP3.exe is looking in the ntdll.dll file you look than the function called RtlUnsubscribeWnfStateChangeNotification and find do not (and it is not on Windows 7 32 - but at least):

  

  If you have an incompatibility of the files somewhere, you have incompatible version or AC3P3 installed or some update of Windows where this function is located in the ntdll.dll file is missing (and I don't know what it is).

• No recording device internal with Windows 7 Pro 64-bit

  I can't find an internal recording device with the computer which uses Windows 7 pro 64-bit system.
  I don't want to plug an external mike, or a line cable entry.  For example, if I open Audacity, & try to record audio.
  the program cannot locate an internal recording device.  My wife's cell phone to Windows 7 edition 64-bit family.

  His portable Audacity works well.  If I put a music cd in, & open Audacity, his large laptop case!

  Hello.  I was check here from time to time, since the latter part of November.
  I didn't know that anyone made a comment.  I ran to resolve registration issues
  several times, with no useful result.  I don't check if the site of ASUS.

  In any case, I bought & installed the HT Omega Striker 7.1 sound card.   Everyone is who
  gave their comments & advice, thank you very much for taking the time.  That sound
  the card is great!  I disabled the sound edge; & installed the 7.1 attacking with the
  drivers.  His exceptional & recording!

  Works very well with Windows 7!  I made several recordings with audacity to the IHOP
  site (read the International House of prayer, not of pancakes!)  with excellent results!