Problem recording ".dll" command prompt

Similar Questions

• Problem creating a command prompt

  Hello
  I created a command prompt based on 'open time' in the history of the SR. I did not choose the time open column to define criteria.
  the problem is that it gives "error on page" when I run. It does not filter. Please help me.
  
  Thank you
  Neena
  
  Published by: user11222182 on June 18, 2009 23:48

  Neena,

  For this wrong, first add the field to your report and run it. It runs?

  If so create a prompt based on the field in your report and test this. If it works too, so you could try removing one field again in the report, if you get an error, you must include the field in your report and hide. You can hide through properties in a table view or drag it to the section excluded in a pivot table view.

  Thank you

  Oli @ Innoveer

• I have a problem with the command prompt.

  Original title: cmd.exe

  I have a system where this problem started a couple of weeks.   When I run a command to a command (any order), it displays the results as expected.  But if I run the command with "cmd /c command", for example "cmd /c date", the screen is erased before the result is displayed.  It is also a problem if I am using perl or python or any other tool when I run a system command and wait to capture the output.  There is always a pagefeed at the beginning of the output character.  Because this behavior started recently tried to restore the system to a point where I knew that this was not the case.   But that did not help.   Any ideas?

  Thank you
  JHS-

  OK, you can ignore it.  I thought about it.   I had created an autorun.cmd file which included a cls command.

  Sorry for the noise.

  JHS-

• Start icon disappears from the taskbar. Command prompt concludes that he cannot fix corrupted files.

  My power icon disappeared from my taskbar after a reboot. Following the advice of the Forum I turned on command prompt and asked the sfc/scannow.

  After a long search, I received notification that there were a few corrupted files and not all could be fixed. This had occurred previously in 2012.

  After a security alert, security, I downloaded the program named Emet. After reading more below in the Microsoft forum, I found the comments which Emet

  may damage files. I decided to uninstall Emet. When I finished that I discovered that the Emet icon has disappeared from the taskbar along

  with the battery icons and a few other icons. I took my Asus laptop at Best Buy and the tech there called a Microsoft service don't. and

  has got instructions to restore the missing icons using the appropriate record. It was in summer 2012. When I stopped my laptop Sunday, December 21, 13

  and then reopened Tuesday, December 23, 13 I found that, once more, my power icon had disappeared from the notification area. The correspondent

  subprogrammes in the control panel for the management of the icons in the notification area were inoperative for the icon of power and a few others. This

  was the exact situation I had in 2012, about 16 months ago.

  After failing to solve the problem with the command prompt, I thought I would ask for help. For the moment, I managed without going through the power icon

  presented at the center of mobility in the office and after having pinned the control panel to the taskbar on the right.

  Hi Ronald,.

  When you first start a new computer, the operating system typically runs Startup service initializations that can take anywhere from one to six hours to finish, depending on which applications are preloaded on the computer. Make sure that you give the operating system sufficient time to finish these Startup service initializations until you stop or restart the computer. This problem generally not happen once the operating system has completed initialization of all before background services is restarted.

  I suggest you refer to the following article which has a few registry tweaks to solve the problem. Please follow the steps and check out them.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

  http://support.Microsoft.com/kb/945011/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link to view the corresponding article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Let us know the status of the issue. We would be happy to help you.

• Problem with command prompt and installation

  Hello

  I try to install Oracle Hyperion on windows server 2012 R2. I have the files downloaded on a single server. I traced this drive on another server. When I try to run the installation file "installtool.cmd" by right clicking and select "Run as Administrator", it does not start. I use a service account that has administrator rights and part of the local Administrators group on the server. However when I copied the files on the local disk, it starts. I have four servers in the deployment and I don't want to copy the binary files on all servers. Not sure why she does not launch when I launch from the mapped drive.

  The other problem is that when I try to launch the command prompt (Admin) and try to change the disc on the mapped drive, it does not change. It gives me this error.

  C:\Windows\System32>y:
  The system cannot find the drive specified.

  But when I use the normal command prompt, change the drive.
  C:\Users\svc_hypadmin>y:

  Y:\ >

  Any help is appreciated...

  Kind regards
  Brig.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• On windows, the command prompt window (XP) start appears and closes what can be the problem

  On windows, the command prompt window (XP) start appears and closes with 2 to 3 seconds what can be the problem

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you put the computer in mode normal startup such as suggested in the article.

  Check if that helps.

• command prompt and high cpu utilization problems

  I have an Acer Aspire laptop. Windows 7-64 bit. My CPU usage has been quite erratic for months. She sometimes becomes up to 4 or 5%, but most of the time, he is running between 50 and 100% (I have a counter on my desk). I've been running all kinds of tools and cleaning methods. I had McAfee antivirus for a prior year of minimal, but renewed problems a few months ago and found strange and annoying that he wouldn't be updated every day while I was working. I assumed something was wrong with her, so I replaced it with a program that I got for free with another purchase from Best Buy... Trend Micro, I think it was called. Well, it appeared that Trend Micro used more process and CPU than McAfee. At that time, I thought it would be safer and cleaner for Microsoft Security Essentials TM trade. I also have CCleaner installed and I run it every other day or two. I also run r-kill and tdsskiller a few times but never found something dangerous. I removed everything that I felt uncomfortable unused programs were safe to remove. The last thing that I see and which seems odd to me is that, at startup, a "command prompt" icon will appear briefly in my taskbar and then quickly go to 'start' 'recent '... I have never seen this before so it seems weird, like a clue any. Also in the last few days, usually online, but also with Solitair Windows offline. Either the cursor will freeze or the screen freezes making useless cursor, even for a moment, and sometimes I'll just "end task." I'm not a gamer, I mainly watch movies and videos... Try, anyway! Thanks in advance for the help!

  Wow you're gluten for punishment than TrendMicro Mcafee Ouch

  You did use less uninstallation of Mcafee?

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  You can get trendmicro from Mcafee here too

  http://www.SevenForums.com/system-security/151276-instructions-tools-remove-residual-anti-virus-programs.html

  Personally, I use Panda free and Premium of Malwarebytes.

• Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

  Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

  You have two options:

  • Perform the action under high administrator privileges.
  • Turn off UAC (not recommended).

  Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• system files and command prompt does not work

  For the last two weeks, I'm having a nightmare. I disabled system restore and when I turned it on again every thing had stoped working (microsoft word and works procedssor), the user account micxrosoft help and support).

  I tried using command prompt, but it does not work properly. When I typed in the shadow of the list he has the right to copy, my name and disturbing without clichés present in this system.  When I go to system restore I just get ablank screen white. If I go into system the control panel says that my C drive is followed.

  I don't know what else to do Windows XP came with the perchase of my little computer. I only am not computer savvy very please check all instructions fool proof. Please HELP, as all I want for Christmas is saystem restoration. Thank you very much

  Please provide additional information on your system:
  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  It seems that your system has or has had a malware infection.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine...

  You should be able to get your system restore calendar works again quite easily, but who will not only relieve your system of malware.

  Don't forget to fix the problem and the difficulty not only the symptom of the problem.

  If you disabled the system restore and he turned his back, which removes all points existing restoration (this is how it is supposed to work).

  I run a few scans of such malicious software indicated below, then work on all the remaining issues.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.  System Restore is sometimes so afflicted, you need to reinstall the system restore (you don't have to reinstall XP - just reinstall the system restore).
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  Restart your system and resolve outstanding issues.
  If your system restore calendar is always to show just a blank white screen, do the following:
  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Re-record the dll is correct, even if they do not need re-registration.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time:

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Error 0x8000ffff trying code désenregistrez the codec file iac25_32.ax starting from the command prompt (cmd.exe)

  My Windows DVD Maker seems to hang after I click the button 'Next', so I looked in my event viewer for more details. I met that a failed module named 'iac25_32.ax' is the source of my problem. To remove it, I went to my command prompt (cmd.exe) and enter the following text: "regsvr32 /u iac25_32.ax' to try and unregister the codec file.

  Here is where my problem occurs: Once I hit enter, I get an error code reading - 0x8000ffff. Why won't my order process?

  Characteristics of code error : "iac25_32.ax" module was loaded but the call to DllUnregisterServer failed with error 0x8000ffff

  How can I solve this error 0x8000ffff code?

  Note that attempting to unregister a DLL that is not registered currently produces a similar to the following error dialog box, regardless of the version of Visual J ++ was used to create the DLL:

  RegSvr32
  DllUnregisterServer dans...\Project1.dll failed.
  Return code was: 0x8000ffff

  FIX: onCOMRegister not called for the VJ-Generated COM DLL
  http://support.Microsoft.com/kb/223339

  Have you ever tried save this file?

  "iac25_32.ax" is a DVD MPEG-4 filter, as it is not a .dll file or not an .ocx file, perhaps it can be saved or unsaved in all cases, but other seem to suggest so it could be possible?

  create dvd Windows has stopped working
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/98fde193-d4e6-417f-8b37-16661e6c6a3a

  Here are a few links of Codec.

  Vista Codec Package Final v5.4.3
  http://www.MajorGeeks.com/Vista_Codec_Package_d5326.html

  Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.

  K - Lite Mega Codec Pack
  K - Lite Codec Pack Full (less features)

  K - Lite Mega Codec Pack 5.6.1
  http://www.free-codecs.com/download/K_Lite_Mega_Codec_Pack.htm 

• Pavilion Elite HPE-170 t: need help with the result of a command prompt to Power Options

  I have recently upgraded to Windows 10 in Windows 7.  Like so many thousands of people, I problelms of sleep mode.  Mine will not be auto-sleep.  It has been suggested that I saw to run command prompt: powercfg-applications

  It supposedly will list the items running on your computer which can now be auto-sleep to work.  I tried several times and up to now, I get the same item displayed each time.  This is what is displayed: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) is followed by this message: a file delete operation is underway

  My first thought is that if there is an operation to remove file in progress all the time, it's maybe the reason why my computer is not auto-sleep.  If there is someone out there who can shed some light on this situation, I would appreciate the help.

  EUREKA * SOLVED
  

  I found the answer to my problem!  After using the control system: powercfg-query and get the answer: \device\harddiskvolume2\windows\sysWOW64\svchost.exe (hpqddsvc) delete file operation is in progress

  I started looking for whatever it is associated with the answer above.  In the Manager of tasks in respect of the services, I found the name of the file hpqddsvc, with a description of HP CUE DeviceDiscovery Service was running.  When I stopped the task and re-tried in opt power standby mode, it worked correctly.  In the Configuration of the system (by typing msconfig at the run prompt) on the Services tab, I unchecked the box for HP CUE DeviceDiscovery Service and rebooted the computer.  The service is no longer running.

  I'm sure that this Service has been added to my computer when I downloaded the hp.com/support product detection tool .  The tool scans your computer to detect and identify HP products.

  This can be useful to others who have the problem of the auto-sleep I've had.

• Satellite keyboard is not working and flashes the command prompts

  Hello world. I hope someone can help... my laptop has suddenly decided to some how turn off the keyboard. No key does not work. The touchpad mouse seems to work very well. Started once w7, a lot of windows boxes flickers between them. Command prompts to do the same thing and I cannot click on any admin agrees with the cursor ect.

  He will not simply accept. I tried the system restore ect but cannot place orders, when similar probs in Device Manager. For example, the cursor jumps oddly at the bottom of any list that I pull up and I can't ride him. The same things happen with another hard drive in the laptop. I scanned with several brands of security too... clear at all. IM wondering if its hardware, not software.

  I even re formatted the hard drive of w7 since another laptop and started again but still the same thing. I have also attached another keyboard to the live system with the same problem. USB keyboards work but still control problems. USB mouse even.

  Thanx

  I understand your question, the internal keyboard does not work, but you can use the external USB keyboard properly... don't you?

  Well, in this case, the question is clear to me: the problem is caused by the fault of the internal keyboard.
  From my point of view of the few he has no alternative option but in order to replace the internal keyboard.

• Execution of multiple lines of command at the command prompt (windows)

  Hello

  I'm vascular using the command prompt in the windows to try to send a command to the microcontroller that is connected through TCP connection.

  I am able to use the normal cmd.exe to send the command but I am unable to send the command all successfully using labview.

  The Vi. I use the exec.vi system found in the labview connectivity section.

  Basically, I want to send is 'telnet A1' motion in the cmd.exe to establish a connection to the microcontroller, followed by "For A1 100 GO," which will be performed by the microcontroller to do what is necessary. But currently, the problem is that I can only establish a connection using the exec.vi system but can't send the second part of the message 'for A1 100 GB".

  My command line, I tried typing is cme.exe /K telnet A1 & for A1 100 GB. It seems that labview is only able to run the first part of the command. Y at - there no alternatives?

  Thank you for all your help.

  I suspect that there are problems of synchronization with this code. Forst, you should clean it to the top because it is very difficult to follow. Cables are hidden under objects, this is a lot bigger than a view type and the code is usually very disorganized. I also suggest that you look at using a state machine, but also a structure of the event to intercept the user interface events such as the Start button.