Audio in Windows 8 Build pro 9200

Similar Questions

• Need clarification on the export of an mxf with 8 audio channels Windows 7 first Pro CS 6.0.3

  I have read and followed the many discussions on this subject. I am grateful that the broadcaster has the patience to endure my test files. Yet once the broadcaster rejected my fifth test file, I am asking for help.

  I've set up a channel Master 8. Channel 1 is a frazzled left stereo mix. Channel 2 is a frazzled right stereo mix. Channel 7 is a copy of channel 1. Channel 8 is a copy of channel 2.

  The broadcaster said that there is no sound on channels 7 and 8, although I see these channels in my mixer as with audio. Posted you a screenshot of my setup of editing and mixing.

  Please tell me what I'm doing wrong. Thank you!

  

  Bring your export in PP.  If you add to that a sequence and see audio 7 and 8, then the problem lies in the diffuser.  If you don't see not audio it, post back with a screenshot of your export settings.

• No 1110ea audio envy 15 after installation of windows 8 64 pro

  No sound on my 1110ea envy 15 after installation of windows 8 64 pro.

  Maybe the audio drivers hp are repaced by victory 8 drivers?

  ass pls

  Hello

  Try the driver from the following link and see if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-113849-1

• HP laptop - 15-af008ax: ask to send me the product key for Windows 8.1 Pro build 9600

  Dear HP,
  You please send me Poduct Key or activation key for activate Windows 8.1 Pro 9600 Build so that she could become authentic. Please send me the key sir

  The official spec page shows your laptop comes with FreeDos, which means you will need to buy a license for Windows on it and it is technically software piracy for a version without a license on your laptop. No one will send you a free key Code.

• No sound - "either Windows Audio and Windows Audio services end Point Builder is not running."

  original title: no sound - Fix he said "either Windows Audio and Windows Audio services end Point Builder is not running."  What should do?

  When I ran Microsoft Fix it for audio, it says that it is unable to solve the problem.  The message was "two windows audio and Windows Audio end Point generator services must run for audio works correctly." At least one of these services is not running. "What should I do now?

  Content in double wire-
  "When I try to use anything related audioi on my computer (volume of the speaker, open iTunes, watch a video), a box appears that reads,"c\Windows\System32\MMDevApi.dll is not designed to run on Windows or it contains an error. " Try to install the program by using the original installation media or contact your system administrator or support software provider. "The mystery is that I have nothing to my computer to ask for that. I have not installed anything new or change the settings. It just started happening. Any advice? »

  Hello

  1. are you able to hear the sound after the error message?

  2. you have an an external sound card or internal, installed on the computer?

  Method 1:

  I suggest you to follow the steps and check.

  (a) click Start

  (b) type services.msc in the search box, and then press enter.

  (c) scroll down to Windows Audio and Windows Audio endpoint builder of Point

  (d) both should be started and set to automatic if one or both are arrested.

  (e) click the name to select it.

  (f) click on restart the service at the top left.

  (g) repeat for both if necessary. If some are not set to automatic, and then double-click the name and on the drop-down list to set the startup type to automatic and apply and ok your way out.

  Method 2:

  I suggest you to run the automated FIXIT from the link below. You can also follow the other steps and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 3:

  If you have a sound card, I suggest you uninstall the audio driver from the Device Manager and and then install the latest audio driver version from the sound card manufacturer's website.

  To uninstall the Device Manager sound, proceed as described in the link below.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  Find the audio driver in the list, do a right click and Uninstall.

  You can also download the drivers from the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  If the steps do not help, I also suggest you to run a scan of the System File Checker .

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Hope this helps and keep us posted.

• How can I find my license Windows 8 pro 9200?

  I bought your desktop PC in a mail store that I had to stop their activities. He had an OEM Windows 8 pro 9200 with a shell of windows 7. He now seeks an activation key.

  I asked several times for software keys/licenses, but they are never arriving.

  Can I find out what it is on the PC and enter it again? (The same thing is happening to my Office 2010 Pro more suite)

  The PC is now about 6 months old, but said that must have the keys in less than twenty-one days.

  If I have to buy a copy of Windows 8 (or 8.1?) the new installation will wipe away all my programs and files on the PC?

  google search for belarc finder key

• fingerprints fingerprints & brightness does not not with windows 8 build in hp probook 4540 9200 s

  HP probook 4540 s

  Windows 8 build 9200

  I detected a problem after the installation of the new operating system windows 8. fingerprint sensor does not work. After installing hp protect tool pilot there show an error message. his revealing "microsoft framework 3.5 required", but I have framework 4.5... Correct this essue as soon as possible. and another problem is brightness does not perfectly.all shortcuts keyboard not work except the brightness. and I can't reduce it manually too.my windos is enabled. and run fast on my laptop. Please fix my problems as soon as possible.

  Thank you.

  Hello thatguy2,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

• Windows 7 Build 7601, now says not genuine after crash

  Bought/installed Win7 Pro on my (aging) machine time Jan/Feb & activated product.

  After a week away recently, my PC did not boot - just crashed.  Last known good configuration did work, catering to the highest point due to a registry restore problem.   Anyway, forced the cancellation by renaming config & software in the \system32 folder.

  Then machine again, I'm immediately went to Windows update to ensure that it was up-to-date & then had "Windows 7 Build 7601, this copy is not genuine."  Had been authorized for about the last 7 months.

  Have tried to change the key product & scoring even once again.  As well as the uninstall & reinstall it again once, but no change.

  I already download Win10 install files when the option popped up;  Maybe I should have completed the installation. Although it may have failed.

  Anyway, here, is out of the tool of diagnosis of MGA.   I hope someone can advise:

  Thanks in advance.

  ----------------

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-*-*-*-9T9KP
  Windows product key hash: FqSWTguNoybw3tVSPd8O8CBPCrI =
  Windows product ID: 55041-152-1911045-86235
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {729FBCB9-07DE-4431-B8AA-769A3CA07816} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150715 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {729FBCB9-07DE-4431-B8AA-769A3CA07816}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH55041-152-1911045-862356S-1-5-21-3698907309-127372443-2681329950MICRO-STAR INTERNATIONAL CO., LTDMS-7360American Megatrends Inc.. V1.10 20081111000000.000000 + 000ECB23E07018400F808090409GMT Standard Time(GMT+00:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-152-191104-03-2057-7601.0000-2452015
  Installation ID: 003795222413929355389113005742479776534552881271123680
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 9T9KP
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 23:02:42 09/11/2015

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 9:11:2015 23:34
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: NgAAAAEABgABAAEAAAACAAAAAQABAAEA6GEeXVi/dOYGnuSpcrToGIj90v0wjoYHTEH0TExY

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC0906 APIC 111108
  FACP 111108 FACP0906
  MCFG 111108 OEMMCFG
  LASRYVITRAGE OEMB0906 111108
  GSCI 111108 GMCHSCI

  I spoke with MS support.  The representative has essentially kept repeating that the product key was not for home/use; later mentioned he has a license of the company & had been used several times.

  However, he had no answer to come as to how is it this had been works well for 8 months & problems have emerged since my start/disk/registry problems.

  It takes time for this abuse be detected by Microsoft because it is a Multiple Activation key (a lot of PC have or will have the same problem) that very probably activated too many times (each key has an activation limit)

  I also tried to find more information as to where the key was first used / details of other activations (in the case where was my repeated recent attempts during the activation/validation was just suspended);  but only repeated representative key is blocked.

  They may not know / have a record of when it has been used first.

  Y at - it other advice? My Win7 installation has been very recently posted just grab the update Win10 install files;   However, I'm guessing that it's probably not worth trying to go down that path right now?

  Since you have not a valid Windows 7 key from the upgrade of Windows 10 can install but most probably (but not immediately) detects the invalid key and also go "(Non authentique)."

  Of course, if it turns out that I need to splash £100 on a 'get genuine' license then I will - but was hoping to get data confirming the situation [seems that my previous purchase by Amazon will not get any farther].

  If this MAK key was purchased by a third party seller to Amazon for their web site at Amazon report. At the very least, they should block / prevent the seller by using their (Amazon) web site.

  Or else I'll watch Win8.1 (& get top of what to Win10 update as soon as possible) or Win10 at home; Although I had barely begun to use Win7 XP!

  Since you said that you have an aging PC I would stick with Windows 7 (support ends January 14, 2020).

  One thing, you can try if you are still interested Windows 10 (after the backup of your important data files is to install Windows 10 via the GWN icon on the taskbar or the media download: https://www.microsoft.com/en-us/software-download/windows10 )

  This will tell you at least if Windows 10 fully supports (graphics, Audio, keyboard and mouse, access Internet, etc.) your PC.

  J W Stuart: http://www.pagestart.com

• How can I solve this problem... windows 7 build 7601 this copy of windows is not genuine

  Hello

  I have a laptop Packard Bell Easynote I bought a few years back from a major retailer of the high street.

  I the have not used for a few months.

  Today I turned on it & it is automatically downloaded & installed a load of updates of Windows 7.

  Now I have a regular black desktop and a note at the bottom right, "windows 7 build 7601 this copy of windows is not genuine".

  I am running windows 7 Home premium 64-bit, service pack 1.

  How can I tell the laptop that my copy of windows is genuine. ??

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote my post:

  1. when (date approximately) did you buy the computer?

  1B. not a Win7 64 bit are preinstalled on the computer when you bought it, did you do a clean install of Win7, or did upgrade you the computer to Win7?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer as you bought?

  4. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  5. KB2925418 is, KB2929961 and/or KB2930275 listed in installed updates(not update history)? [1]

  5b. How about KB2909921, KB2916036, KB2912390 or maybe KB2909210?

  6 assuming that Java is installed => is 51 update Java Version 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/installed.jsp

  7 is Adobe Flash Player v12.0.0.77 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  8A. is Internet Explorer 8 (IE8), IE9 or IE10, IE11 installed?

  8 b. is Firefox, Chrome or any other alternative browser installed?

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ==============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

• Where can I get the activation key for Windows 8 build 9800?

  I can't have the activation key for windows 8 build 9200? Help me please

  If you purchased Windows 8:

  Go to the order summary page, you can find your product key:

  https://www.mswos.com/

  If Windows 8 is preinstalled on a new computer that you own:

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

• HOW CAN I UPGRADE WINDOWS 8 FOR WINDOWS 8.1 PRO.

  HOW CAN I UPGRADE WINDOWS 8 FOR WINDOWS 8.1 PRO. WHEN I CLICK ON ADD FEATURES TO MY SA COMPUTER ASKING FOR THE PRODUCT KEY. I DO NOT KNOW THE PRODUCT KEY DELL MANUFACTURING DIRECTLY INSTALLED IN MY SYSTEM. SO HOW CAN I SPEND?

  How can I know the product key to install the features?

  Note: Tests of Windows 8.1 Preview (warning)

  It was clear that test the preview Windows 8.1 will not as simple and involve certain prerequisites.

  Do not install it on a machine or production start-up disk.

  Microsoft Senior Product Marketing Manager Michael Niehaus reiterated this message in the RT in the session of the company Tuesday. When the preview 8.1 is available, Windows 8 and Windows RT users will receive a notification from Windows Update. This update will trigger the new bits will appear in the Windows store, where potential testers will be able to read the description and choose to install or not.

  Once the final versions of Windows 8.1 are available, after their release to manufacturing, those who have downloaded the preview will get the same Windows Update and the Windows Store notification. While their data and their accounts will be kept if and when they choose to install version 8.1 free, final, all their applications must be reinstalled, said Niehaus.

  Even if the testers are opting instead to restore their Windows 8 devices after you install the bits of the preview, they will still have to reinstall their applications once they move to the RTM of Windows 8.1 version.

  Windows 8 users who do not install the preview build and opt instead to go directly from Windows 8/Windows RT for Windows 8.1 will not reinstall their applications. All parameters, data and applications will be postponed, a spokesman said when I asked. Users will be able to decide when and if they want to switch from Windows 8 and Windows RT to the 8.1 versions, officials stressed.

  Source:

  http://News.CNET.com/8301-10805_3-57587794-75/how-Windows-8.1-upgrades-will-get-to-you/

  How to prepare:

  Backup of your system before:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  See the following article from Microsoft MVP JW Stuart on how to make a backup of an installation of Windows XP here using Acronis True Image here

  Alternatively, you can use for backup of Windows XP is Easeus backup, JW Stuart also has an article about it here

  These same principles should work for the people who are running Windows Vista.

  If you run editions such as Windows Vista Business, Enterprise or Ultimate Edition, you can use the built in backup of the computer of your Vista installation. This can be very handy in case of failure of your installation of Windows 8. For instructions on how to use the backup of the computer, see article following here. Of course, you'll need an external hard drive for this task.

  Create a partition:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

  Dual boot:

  See instructions for dual boot based on the installation of the Windows 8 previews, the same principles will work for Windows 8.1 Preview:

  How dual boot Windows XP and Windows 8

  How dual boot Windows Vista/7 and Windows 8

  Use the Virtual Machine software:

  This method is recommended if you have a powerful enough processor and plenty of memory.

  You can use alternatives such as Oracle VirtualBox or VMWare Player.

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

  If you are running Windows 8 Pro on a computer with the support of SLAT second layer of address translation, you can use the built in Hyper-V which comes with Windows 8 Pro edition.

  Update this article with relevant content.

• VMware workstation 11 and Windows 10 build 9926 auto resizing does not

  Host: Windows 8.1 Pro x 64

  VMware: Workstation 11

  Client: Windows 10 Build 9926

  Problem I have is in the guest operating system (win 10).  I can not auto resize the guest to fit the window (now Vmware worksation, opinion, comments made.  It flashes on the full screen, then goes back to the resolution that it is.  I'm stuck at the Windows gives me resolutions.

  I know that this version comes out today.  But I thought I'd give you guys a heads up.

  THX.

  Build 10074 works!

  So, I did a clean install of the new generation (10074).  Workstation makes easy installation on it.  During the easy setup process, it didn't install VMWare tools, but I see the tools have been installed.  I tried to re-size that the screen with 3D powered acceleration; and it worked!

  This issue is finally resolved. !

• Windows restart as soon as try to update drivers in windows on mac pro Book 10

  Hello

  After so much hassle to install windows on my mac 10, some of the features such as graphic and sound card do not work, I try to install the driver using bootcamp, however, they are not compatible with windows 10, and then I try to download driver manufacturers, such as the intel and amd, however, as soon as I try to update the driver windows will restart. does anyone have a solution?

  You have an identical question in windows restart as soon as try to update the drivers in windows 10 mac pro book .

  What is the model of the year of your Mac?

• Windows 7 build 7600 it is not authentic

  Hello

  I've just loaded my computer hp pavillion laptop and in the lower right corner of my screen it say "windows 7 build 7600 it is not authentic" I don't know what it is or what it takes please help she also asks me to enter a product key, but I did not like everything has been preinstalled on it

  much thanks collette

  Hello

  Yes. It makes more sense.

  You must make the option "activate by phone". Start the activation process. There should be a link in the task bar.

  The following number is the line of Microsoft Windows Activation

  1-866-530-6599

  This Microsoft web page has a lot of frequently asked questions that should help you.

  Best regards
  ERICO

• Windows 7 - Build 7601 this copy of Windows is not genuine

  Hello everyone.

  Im a newbie here so I hope I get this right.
  I have a question about this message on my desk to read "Windows 7 Build 7601 this copy of Windows is not genuine."?
  I bought this Satellite c660 to Qatif in Saudi Arabia and now he's here in the Philippines.
  My laptop is Windows 7 Professional 32-bit. It asks for a product key and I can't find one. There is no product in the background key sticker and I don't know where to get that.
  I ran a diagnostic and I hope this helps.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - CM74G - RPHKF-PW487
  Windows product key hash: 71BRYMECVaSXedfumfu8zryHJVY =
  Windows product ID: 00371-177-0000061-85062
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {1E8191EC-15C9-4DC3-8886-55DD7BBA8D84} (4)
  Admin: No.
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.111118 - 2330
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {1E8191EC-15C9-4DC3-8886-55DD7BBA8D84}1.9.0027.06.1.7601.2.00010100.1.0.048x 32*-*-*-*-PW48700371-177-0000061-850625S-1-5-21-3557145390-3644324294-2060978674TOSHIBASatellite C660TOSHIBA1.6020110707000000.000000 + 0004B8C3E07018400F804090409Korea Standard Time(GMT+09:00)03TOSCPLTOSCPL00103103Microsoft Office Enterprise 200712ACD7202654E586fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-65261 14

  Content Spsys.log: 0 x 80070002

  License data-->
  Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 3:15:2012 19:39
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: MgAAAAEAAgABAAIAAAABAAAAAwABAAEAJJT + lnD3en8mEX4nsL 8NxRgtMToxMDARso plus

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: no, table invalid SLIC
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP TOSCPL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  OSFR TOSHIBA HAS + 2ND ID
  SLIC TOSCPL TOSCPL00
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Please someone help? I'm not a techno person and I don't know how to solve this problem. Thanks and regards.

  > How can I get a copy?
  If your laptop was initially shipped with Win7 preinstalled and you want to now order original Toshiba Recovery disk for your laptop that you can do it on https://backupmedia.toshiba.eu/landing.aspx
  >... where I can find a product key that I use to activate windows?
  You can not find it. I put t understand your question. If you use OS Toshiba you n t need activation code, but if not you and if pre-installed OS is installed with the installation of Microsoft disk you need to pay for a valid license.

  All the time, you're in the magic circle. You always ask the same question, but somehow, you don t read what other people write here. Please read another thread - http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=262518