audio input is displayed in a different channel

Similar Questions

• Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

  I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

  The line-in input on a Mac requires an entry amplified, not a single entry.

  The headphone includes a contact mic. See:

  How to use the Apple earphones with remote and mic with your Mac - Apple Support

  You can also het USB mic input devices

• 550-215na Pavilion: no sound from the rear audio input jack

  Hello

  I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

  Any help would be greatly appreciated!

  Hi there @PrimoFigs,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

  Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

  What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

  Also try this: desktop HP-no sound on speakers (Windows 8).

  Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satellite M40 - 142, stereo audio input

  I can 'stereo' record through the microphone in Satellite M40 - 142?
  It is possible to have a line-input/output stereo or mono only?

  Hello

  As far as I know the line output (headphone jack) allows the connection of stereo headphones (16 Ohm min.) or a different audio output device. When you connect headphones, the internal speaker is automatically disabled. The input line (Jack Microphone) allows to connect a monaural microphone or other audio input device.

  Good bye

• HP ENVY 700-210 Desktop PC: Windows 10 improved rear output loss taken audio input on desktop HP Envy

  Beats and all software audio apps work fine after 10 window installed. but I lost out in all but one of my audio jacks back during playback using any audio application (Media Player, Cakewalk, etc.).  I went to manage audio devices on the control panel and to configure/test the speakers/headphones and I went out on the set of the back to my speakers during the test; but, not for playback of audio applications.

  I found a solution.  After the announcement of this question, I went through the different options for audio and put to update my sound driver.  Since I got a response from the Microsoft Community ( http://answers.microsoft.com ) forum which confirms this.

  > Go to Device Manager (press Windows + X, select Device Manager button.

  > Locate the audio adapter.  In my case, I had two entries for audio devices, "Audio inputs and outputs" and "audio, video, and game controllers.

  > I updated the driver for "IDT High Definition Audio CODEC" under "audio, video and game controllers".   It worked.

  > I had to reboot twice before it takes effect.

  > It seems that it is the same driver for 'Speakers/headphones' under ' Audio inputs and outputs.

  > Update drivers is reversible using the button "revert to the version.

• Genesis 4 Apple Tv doesn't have an optical Audio input jack.

  I just replaced my generation 3 Apple Tv with a generation 4 Apple Tv.

  The Genesis 3 has an optical Audio input jack that I used to connect my Bose system.

  The Genesis 4 doesn't have it.  Now I can't audio through my Bose system.

  Any suggestions?

  Use something different? I have read there are some cards, but you are right, that the v4 of the Apple TV doesn't have an optical port.

• audio input read several sound cards

  Heey everybody,

  I have a problem. I want to read two different signals at the same time of 2 different cards. 1 sound card internal of my computer laptop and 1 usb sound card.

  So I used the VI of its acquisition.

  

  Reading the two signals at the same time is not a problem until I took more than about 30 seconds measurement time for. He gets a buffer overrun.

  

  So I tried to do the following:

  

  I did this with 1 signal first and it worked perfectly, every second he has updated.

  But when I added the second signal he wanted only to read the first second of the first signal and then it got stuck, and I had to stop closing software. And then the killing labview with the windows taskmanagement thingey.

  Someone has an idea what is the problem?

  Greetings,

  Jory

  OK, never mind, I have solved. I made the largest buffers (audio input configure block) and now it works like a charm

• Audio input level set manually on t5i

  First post here. I just started working with my new t5i, which I use to work on my current video tutorial series. In the manual, I see how it is possible to set the maually of audio input for an external microphone level, but I can't understand how to navigate in the menu that allows me to do this. I pored over the user manual a number of times and could not find this information. Can anyone help?

  Same camera in different shooting modes. The menus I described would be for shooting video in 'P, Tv, Av or M '. Anything else will give you a small selection of menu, as you have already seen.

• Challenges of the audio input jack (seems not work)

  Hello

  I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

  Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

  Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

  I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

  Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

  Any suggestions on how to proceed and get my audio jack working again please?

  Kind regards

  Klmdb

  Hi @klmdb

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

• Audio input Inspiron 15 3000 can not detect the headset

  Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

  Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

  1. open Device Manager (type devmgmt.msc in the box of Windows search).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

  If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

  If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

• Audio input on mac (MacBook Pro (retina, 13 inch, mid-2014) which has a single audio port for headphones and number of PORT of ENTRY.

  How to do on my MacBook Pro (retina, 13 inch, mid-2014), which has only a headphone audio input port? Do Garageband, or Preferences/audio, or Audioand MIDI or what?

  Connect an audio interface to a USB port to have an audio input, or insert a divider entry in the headphone port. You need additional hardware to have an audio input.

• Can you stereo audio input in an iPhone and listen in real-time?

  Well, it's rather a strange question, so I will explain briefly the background... I am a user of the hearing and I'm considering the purchase of hearing aids new fantasies that are capable of connecting to an iPhone (wireless via THE Bluetooth); This allows several things, including the ability to listen to the audio from the phone.

  I currently don't own an iPhone but wonder if buying one, as well as these hearing aids (Starkey Halo 2, if you're curious) might be a good option.

  The thing that is currently my attention is: is there a way that I could use this configuration of audio stream of (for example), a TV or a stereo directly to hearing aids? To do this I would need power audio * in * the iPhone and do share the same audio output for hearing aids. The audio input should be high enough quality and (especially!) in stereo, not mono; so we couldn't use the 3.5 mm jack. Ideally, I'd like to audio input via a digital SPDIF (PCM stereo) connection; If this is not possible then via a signal analog stereo level line (preferably via XLR, but failing that would make a jack or RCA). Another important thing is that (except what is inevitable due to the nature of the Bluetooth connection), this should be pretty low latency.

  I guess I would need some kind of accessory for this and perhaps also additional software.

  How possible it seems?

  You might want to repost on in the forum "hearing". There seems to be a number of users of Halo.

  Hearing

• Audio input

  What are the controls for recording Audio Input in Win 7 for Compaq Presario CQ 5600F?

  Please notify.

  Thank you

  Hello

  The audio controls for Windows 7 are located in the control panel:

  Open the control panel. Click hardware, sound, and then click record. You will see a variety of controls/recording sound.

  I hope this helps.

• Audio input does not not on my Satellite A200 - 1CR WXP SP2

  Hello

  My laptop is Satellite A200-1CR. Earlier I changed my Vista laptop to Windows XP SP2 home edition, but I have a problem. My audio does not.

  Realtek HD Audio input and output driver is there but does not
  Upcoming audio output.
  But not a supported Audio input.
  Please someone help and replay quickly for me.
  I'll wait for your replay.

  Thank you.
  Arul.A

  Hello!

  I just wanted to share a few experiences. When I shot down my system to Windows XP edition family of pre-installed Vista (Satellite A100) I went to the support section of the official site of Toshiba and downloaded all available for my laptop to XP. And everything has been working fine until now. Oh, I think this chipset driver I got from the Intel site.

  Maybe try to re - install some components like chipset driver (as the audio is embedded)?

  Good luck!

• Satellite L40-B1258 - taken from audio input does not work

  Hi, the audio jack in my laptop does not work. When I bought it I don't check the audio jack, after a few months of using my laptop only then I discovered that the audio input jack is not working. I tried to connect an external speaker or the headphones and both do not work.

  In Control Panel > Sound > playback - only speakers is available in the list, there is no helmet. Help, please...

  Satellite L40-B1258
  Part No. PSKQEV-00V005AR

  The devices on which you can see when you turn on the devices see the disabled option?

  In any case being that peripheral external is correctly connected. Put the audio input to the end.

  When listen you to music on the internal speakers and headphones is OFF music or you can always hear it on the internal speakers?