audio is unsynched in new sequence?

Similar Questions

• Audio kills razor after Mid-sequence cut tool.

  Hello

  I use the first Pro CC 9.2 to modify a nested sequence of 2 x video and 2 x Audio tracks. I have already edited two hours or equipment in any 30 minutes and all of a sudden my next haircut with the razor tool removes completely the audio during the rest of the nested sequence. I can double click on the nested sequence and see the original 2 x audio video and 2 x titles all works well (before and after cutting with the razor tool). I can even copy and paste these audio tracks (post-a cut) No nested in the nested sequence and listen to them fine?! Someone can explain why or how is what is happening. I already got half a dozen videos the same method without any problem.  Thanks for your time and any help you can offer.

  TL; Dr

  Razor tool inexplicably kills all the audio of a nested sequence of mounting medium.

  Found a work around. Select the rest of the track of nested problem (which had no sound after the edict) and a clutch of replacement. It has transformed into a new sequence (but always in sync). I even did some retouching tool razor to see if the problem occurs again, but well.

• new sequence of the clip adobe cc 2015

  front of "new sequence of the clip" video using the new sequence could open their own values. Now, I can only open a single channel audio sequence with this method. I wonder how I can like you used to?

  Yes but there is a difference in the new and new sequence of the clip.

• No audio for cam multi-nested sequence

  Confused about how this should work cannot so someone please double check these steps?  I'm getting no audio to a sequence of nested active multi-came.

  Sequence of source:

  Video track 1-3

  Audio track 1-3 (silence)

  Track audio (active) ext 4

  I had to synchronize all these manually in the source sequence. Once synchronized, I cut 1-3 audio track and the track audio left 4 active.

  So, I wanted to create new multicam sequence:

  1 has created a new sequence

  2. drag the source in the new sequence sequence, thus it nesting

  3. right click on the new sequence and enable the multi cam

  4 no sound on the new track sequence

  If I created a new multi cam sequence leaving the first (i.e. selecting clips, activate sequence cam multi and audio sync) and create a new sequence, I have no problem getting audio.

  If you want not audio tracks 1-3, try remove these titles rather than their inhibition. I think that if the audio that is currently on the A4 is moved to A1, then you will hear once he nestled and enabled asa a multicam sequence.

• I can do something that would cause all the new sequence files to have the same local variables?

  I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.

  Does anyone know a way to do what I'm doing?

  Thank you.

  Skeptic,

  If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor.  You can then use this template to create all your future movies.  Once you configure the model you like you will be easy to reuse this sequence skeleton again.

• Beginner frame size question-new sequence is not what says PP

  I want to crop 30px from the bottom of a 576 x 352 movie. If only I could drag a marquee selection autour with a crop tool and save it would be perfect.

  All that I know to do is create a new sequence with the new frame size 576 x 322, then copy the old film in it. I have create a new sequence of Custom, and PP dialog box shows that it has the desired size (scrn bottom CAP), but it isn't... its actually much smaller and the most cultivated in all parts. When I copy in the 576 x 352 images in to the new sequence, the image size is not yet near. What I am doing wrong?

  PP CS6 mac

  

  

  The spacing in pixels between these two screens do not match... are the pixels of your film footage square pixels, or more narrow les.909? Make sure your settings to completely sequence corresponding to the size of the image file - and all other things except to change the dimension of height. So remember to slide images of this sequence, using 'set to the size of the image' and see if it works better.

  Neil

• Newbie question - how to set up the new sequence of 1280 x 720?

  Need to do a video class for Youtube & PP project still to learn.

  Read YT vid is 16:9 ratio, and a common frame size is 1280 x 720, but having trouble setting up of work area.

  for example. New sequence / select Widescreen 48 kHz, which is the format of the pixels is D1/DV... Image 16:9 720 poster size h, (where h is height right?... but no width)

  Once created, I look under settings of sequence and this watch frame size 720 Horiz and 480 green, gray & unchangable. Like all other fields.

  That's happened? I don't understand... How can I get 1280 x 720?

  Usually I drop a video on a new timeline, makes - me if I want to change the setting to match, but I have vids of 1280 x 720 for this project, some are bigger, some are vertical phone mobile videos. I tried to drop a jpg 1280 x 720 on a new timeline, but did not get this dialog box.

  I don't have the time to do a whole bunch of tutorials at the moment, hope someone can help make me it past this issue.

  Thank you

  You need to fix CS6 first missing sequence settings:

  Features and sequence presets missing | Adobe Premiere Pro CS6, first Pro CC

  Once you have done this, you can configure your sequence.

• Creates a new sequence lost the old 1

  Hi I created a new sequence after the installation of a sequence. Although the sequence was not named, I just dropped the footage on the timeline and used this sequence. So, I created a new 1 and you click the x on my sequence bar. to close, knowing that he was saved, and I would be able to access it later when I needed it. But now I can't find the sequence, how to find this old sequence?

  TIA

  Updated - I went to my individual files and he has shown me a small icon in the lower corner which files have been used. I clicked on that little icon and he grew up in this sequence. Problem solved

• I want to create new sequence from a clip using script.

  I want to create new sequence from a clip using script.

  You can pop the dialog box new sequence (which requires interaction from the user to confirm the name of sequence), or create a new sequence from a .sqpreset file (and specify the name); There is no API around the feature 'make a sequence corresponding to this project item', available in the project Panel.

• When you create a new project, the "new sequence settings" step doe appears not automatically, what to do?

  Hello

  I have a question I make videos of product for a company that they would do that to me in a 16:9 format and in HD. Because they do not know on which channels they want to publish, but it is certain that they will publish on youtube I wanted to do it in the settings HDV and DVCPRO HD 720 p 24 or even 1080 p 24. I bought the license to create online and for some reason that I don't have the option at the beginning when I create a new project to change the settings for the sequence. They do not appear, and then I can not change. Guys do you have any idea what can be done in order to access this setting before the project opens in the end?

  I'd appreciate strongly any help in this matter!

  See you soon,.

  Mascha

  This option is no longer available in the current versions of first. Once you click OK in the new project dialog box, you can then create some sequences that you like new sequence in the dialog box. You can also return to any order and change them through the sequence settings.

• Wouldn't add a new sequence of project no matter what

  Hey guys and ladies.

  I'm a rookie on this topic, please help me :)

  I've added a new project and add a new sequence. I click on file > new > sequence or press Ctrl + N or in the small window to explore lower-left on the new sequence. No matter what I do, the system just seems unresponsive, there is no answer to my action. How can I reset all configurations that I may accidentally made?

  Thank you, David

  Aight I got it. I had to delete the data ' AppData > Premiere Pro "in order to obtain the sequences made :)

• Paste the contents of a sequence into a new sequence

  Hello

  I would like to perform a technique that I used a lot of FCP.

  She is to assemble all the rushes in a sequence, then go through it with the source monitor and insert its contents into a new sequence.

  Now, when I try to do that, I can insert only the sequence itself in the news, so I am the subsequences in my mounting sequence I want any.

  Is there a way to perform this kind of editing?

  Thank you

  Lotfi B.

  If you are on CC, click on the upper left button on the timeline, it will toggle between add clips, or add nests.

• Create new sequences of the Razor tool

  Hello:

  I have a video of 2 hours of questions / answers in a forum.  I want this divided into 8 sessions of 15 minutes, each representing a different question.  I can cut the clip using the razor tool, but I don't see how to take each piece of 15 minutes and place it on a new sequence, thus creating 8 sequences.  I then export each 8 sequence regardless as a flash video, creating 8 videos flash can I insert into Dreamweaver.

  I tried to copy / paste, drag, but the sections cut do not seem to want to leave the original sequence that I imported.

  Ideas?

  Kind regards

  Rich Locus

  Create a copy of your full length sequence.

  Rename the duplicate sequence "Session 1" (or something similar)

  Edit this new sequence to include only the first session.

  Create another copy of your full length sequence.

  Rename the duplicate sequence "Session 2" (or something similar)

  Edit this new sequence to include only the second session.

  Repeat steps.

  Notes:

  Don't forget to work on duplicates, and then save your cutting the length.

  Create a duplicate sequence by selecting

  in the project Panel and then Ctrl + click - move.

• Create a new sequence in first pro cc

  Please tell me how to create a new sequence that is the size of the selected item?

  Steven explained how do it in the first response to my query.

  Best,

  J

• First Pro CC does not create a new sequence with a new project

  I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.

  In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.

  In CC, once you have created a project, you end up looking at an empty timeline.  You then go to the file, new, sequence and it do.

  Looks like a strange step to include, no?

  Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?

  Yes, as Jim mentioned, there are other ways to create a sequence.  For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip.  Or in the project Panel, drag an item to a new item icon.  Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.