Wouldn't add a new sequence of project no matter what

Similar Questions

• When I right click, the same context menu opens (menu hyperlinks, with "Open link in a new tab", etc.) no matter what/where I do a right-click.

  No matter where I right click on a webpage displayed (NOT the bar menu at the top of the screen), in computer text highlighted, a white spot in a Web page, or whatever it is, the shortcut menu for a hyperlink appears upward (with options to open it in a new tab, window or private (, bookmarking), and none of these options actually do anything, even if it is a hyperlink, I'm clicking. With the help of shortcuts like Ctrl + click on work very well. I have not recently installed plug-ins, and it only started a few hours ago. Wat do I do?

  Try disabling Firebug and see how it is.

• The deskcut add on 0.6.0.3 no matter what I try does not work

  When I right click on a web page in ff to save a shortcut on my desktop it does not work. The deskcut put the shortcut on the desktop more. Why?

  I can drag the link on the desktop and when I go over it, it shows the url, but when I click the icon it tries to set up a printer to complete a print job

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• When you create a new project, the "new sequence settings" step doe appears not automatically, what to do?

  Hello

  I have a question I make videos of product for a company that they would do that to me in a 16:9 format and in HD. Because they do not know on which channels they want to publish, but it is certain that they will publish on youtube I wanted to do it in the settings HDV and DVCPRO HD 720 p 24 or even 1080 p 24. I bought the license to create online and for some reason that I don't have the option at the beginning when I create a new project to change the settings for the sequence. They do not appear, and then I can not change. Guys do you have any idea what can be done in order to access this setting before the project opens in the end?

  I'd appreciate strongly any help in this matter!

  See you soon,.

  Mascha

  This option is no longer available in the current versions of first. Once you click OK in the new project dialog box, you can then create some sequences that you like new sequence in the dialog box. You can also return to any order and change them through the sequence settings.

• First Pro CC does not create a new sequence with a new project

  I'm sure I must be missing something, but when I create a new project in first Pro CC, it does not automatically create a new sequence.

  In CS6, create a new project would cause a list of sequence presets, and then create a sequence is empty for you.

  In CC, once you have created a project, you end up looking at an empty timeline.  You then go to the file, new, sequence and it do.

  Looks like a strange step to include, no?

  Is there a setting that I have not found so made CC to create new projects with a sequence like CS6?

  Yes, as Jim mentioned, there are other ways to create a sequence.  For example, simply import your video footage and then with a clip selected, choose file > New > sequence of the Clip.  Or in the project Panel, drag an item to a new item icon.  Much easier create the sequence of way, rather than by reading all the parameters in the dialog box new sequence and try to understand which attributes correspond to the media they work with.

• Moving notes/descriptions of sequences between projects

  Is it possible to get the notes of sequences/log (i.e. descriptions and the columns in the project of color-coding Panel) of one project to another?

  A producer has left a lot of good info, but they imported all MXF and superfluous BMP for images of P2 in the project. I would just go through and remove all these (or move them to a folder 'trash') within the project, but there are several copies of many of the MXfs and there is a lot of footage to cross and take all this stuff on. (lot of 2 sometimes 3 days of shooting 3 cameras: about 1 TB).

  Also, I don't want to have to go through and add a link to any media because it goes through one at a time due to the nature of the way in which P2 footage store itself so I can't just link the file top of page and let the first to find the rest; In addition, it would be lots of extra disk space lost in the form of unnecessary media Cache files.

  Perhaps a solution using prelude or Media Encoder? I just want to be able to make my own PPprj with a cleaner import (what I did), but also bring on all the comments/color-coding, which is perhaps in the metadata? If this is not possible, no biggie, it would just make my life easier and remove a giant hassle. If it is possible please notify.

  Thank you!

  It is possible to import sequences of a project and the files that were used on the sequence to come. Journal transfer notes via as well; It may be that all that you need transfers to the course. Check it out and we do know.

  Just import the footage into your new project and see what happens. Not all of the project, just the sequences you want.

  I use images of P2, but I don't think it's important in this case. Please let me know if I'm wrong about this.

• Add the new entry name of folder of bookmarks does not

  (There's a reason I'm fool the previous thread on this subject, as well as my response to this: I couldn't find a way to add FireFox 10.0.2 to the tags of the thread.) If the thread tags may be edited/added, I wouldn't highlight problems with FireFox 10.0.2 by launching this new thread.)
  RE add new bookmarks folder, can not enter the name of the new folder:

  I am now having this problem with FireFox 10.0.2, 11/03/2012

  When I click on add a folder, a new folder appears in the tree view and the folder name field is highlighted for the entry. But when I start to type characters in the field, I can only type 1 or 2 characters at the most seized stops accept input. I then go to the bookmarks menu, locate the new folder, right-click it, click Properties and complete the registration of the name of the folder.

  At worst, the folder name field will cease to accept entry as soon as I type the first tank, in which case the name of the folder will remain as "new folder." I find the new folder in the bookmarks menu to change the name, as described above.

  It is very annoying because it adds a number of additional steps just to add a new folder in the bookmarks menu. Add the new folder through the "Show all bookmarks" and navigate through the folder hierarchy are an alternative workaround, but that records all the steps.

  Any ideas or solutions?

  Hi John99,
  It has worked well in Mode without failure. Thanks for the suggestion!

  I'm going offline a bit to understand what add-on, plugin, etc., could be causing it. In the meantime, I have marked your suggestion to use Mode safe as useful so that anyone else coming here could get the clue.

  I should probably drop another line in the thread for the guy who in (or has been) using FireFox 7...

  I'll post my results if I can understand it.

  UPDATE:

  I went after any add-on which had nothing to do with bookmarks.

  It was the first add-on I tried, SortPlaces 1.9.1 that automatically sorts bookmarks in various ways according to the parameters. When I disabled it, the problem disappeared.

  I re-enabled it and checked the options to see if I could understand why she was stop to add the new folder. In the 'Options' tab, there is a time limit for how long interval SortPlaces will wait before you sort a bookmark changed or added. It was set to 3 seconds.

  It is not long enough for old men by typing the new name of folder. I put it in 10 seconds. Then, I created a new folder of bookmarks and start typing a name long nonsense, while I looked at the clock. After that 10 seconds it stopped accepting the entrance, right on the mark. What this hidden for me earlier, it was that when he stops to accept input, you don't see the new folder to place in the position of sorting on the menu add a folder. You will see that if you expand the folder later. It's probably why I didn't connect the two.

  Anyway, problem solved. I'm leaving the delay to 10 seconds. If I ever need to be longer, I'll just increase it.

  Thanks again for the suggestion of Mode safe and enjoy the next season of mud.

  Alan Mintaka

• When I add a new event to the calendar, what I type is 'New event' when I press return. Why?

  When I add a new event to the calendar, I type the name of the event in the field, change the time, add notes, etc. When I press return, the new event indicates briefly on the calendar as what I typed, but most of the time, it is up to 'new event '. I tried to change my sequence of this type I and sometimes validate instead of return, but it doesn't seem to be a reason for this behavior. Also, it happens all the time, just most of the time.

  It's extremely frustrating because if I don't notice it right away, I don't know what was the event.

  Any suggestions?

  I use OS X, 10.9.5.

  Maybe this will help.

  Calendar may not enter the new event.

  Calendar may not enter the new event (2)

• I can do something that would cause all the new sequence files to have the same local variables?

  I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.

  Does anyone know a way to do what I'm doing?

  Thank you.

  Skeptic,

  If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor.  You can then use this template to create all your future movies.  Once you configure the model you like you will be easy to reuse this sequence skeleton again.

• Titles and effects in Windows Movie Maker transition are passed in the movie when you try to add a new video

  Cannot add a new item at the beginning of the video - Please HELP! __

  Hello

  I edited a video in WMM, registered, it's all good.

  now, I need to add a little extra clip at the beginning of the recorded movie. but when I have to add to the beginning (I just drag and drop it at the beginning), it seems to push all my effects of transitions and titles forwards in the film. If the titles that are supposed to before some clips are now pushed more in other clips or clips that appear later in the film!

  is there a way to avoid this problem?

  I appreciate any help!

  Thank you
  jump

  Hello

  I edited a video in WMM, registered, it's all good.

  now, I need to add a little extra clip at the beginning of the recorded movie. but when I have to add to the beginning (I just drag and drop it at the beginning), it seems to push all my effects of transitions and titles forwards in the film. If the titles that are supposed to before some clips are now pushed more in other clips or clips that appear later in the film!

  is there a way to avoid this problem?

  I appreciate any help!

  Thank you
  jump

  =====================================
  If publish you (save) project in the format of video .wmv
  in a folder on your drive hard drive... and then reimport the .wmv
  film of the file and drag it on the timeline (as a new project)...
  the items will be more separated and you can add
  your new clip at the beginning without disturbing anything.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Add a new ipsec connection to an interface (which work already in another session)

  Hi, guys like tittle says:

  I already have a session running ipsec.

  Now, I need to set up another with a different peer ipsec tunnel and traffic not related.

  Documents mention that it is not possible for re-branded, more than one encryption in an interface card.

  I have only a public interface, so how do you achieve this?

  BTW:

  I need also of course on the config... I can't turn the existing connection.

  Here is my config.

  **********************************************************************************************************

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  address of isakmp crypto key [Council] 200.222.222.1

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac MYTRANSFORM

  !

  MYMAP 10 ipsec-isakmp crypto map

  Description "vpn site to site of my remote"

  defined by peer 200.222.222.1

  game of transformation-MYTRASNFORM

  match address 150

  !

  interface GigabitEthernet0/1/1.10

  encapsulation dot1Q 10

  IP 222.111.1.1 255.255.255.128

  IP access-group 170 to

  crypto MYMAP map

  !

  Extend 150 IP access list

  10 permit tcp host 172.24.3.1 eq 8888 host 172.22.0.1 (2032 matches)

  20 permit ip 172.24.3.0 0.0.0.255 host 172.22.8.16

  30 permit ip 172.24.3.0 0.0.0.255 host 172.22.5.41

  IP 172.24.3.0 allow 40 0.0.0.255 host 172.22.6.160 (64 matches)

  Any help on that would be preciated,

  Thank you!!

  Leo.

  Hello

  Essentially, you use existing map of Crypto

  So looking at your existing configuration

  • Add a new "crypto isakmp policy x" UNLESS the existing matches the parameters of new connections also
  • Add a new "isakmp crypto key" for this new peer configuration
  • Add a new configuration of "crypto ipsec transform-set" , UNLESS the existing matches the parameters of new connections also
  • Add a new ' access-list ' that defines networks the and remote for this VPN L2L
  • Add a new 'MYMAP x ipsec-isakmp crypto map' to the existing one

  If you could add something like this to the existing "crypto map"

  MYMAP 20 ipsec-isakmp crypto map

  Description Connection 2

  defined peer x.x.x.x

  transform-Set

  function address

  In particular note the number used in the foregoing 'MYMAP 20 ipsec-isakmp crypto map'

  So to my rest of understanding of configurations, you add as usual, but for the Crypto map you will need its own number sequence/number/order number.

  Also do not forget to add NAT0 / configurations NAT Exemption.

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni

• Problem with PPR in a table advanced with the insertion of several lines in create the page using 'add a new button '.

  Hello experts,

  I created a page that contains an array of advanced, 6-7fields (including a poplist column)

  Whenever I have add a new using the line add new line button, I get a null pointer exception.

  Code in Scenario1.

  
  

  Public Sub handleCurrencyChangeEvent()

  {

  PVO OAViewObject = (OAViewObject) findViewObject ("xxCurrencyPVO1");

  Line OARow = (OARow) pvo.first ();

  OAViewObject dtlVO = (OAViewObject) findViewObject ("xxEcreditCardDtlVO1");

  OARow dtlRow = (OARow) dtlVO.getCurrentRow ();

  String currency = (String) dtlRow.getAttribute ("CurrencyCode");    / / NULL POINTER EXCEPTION

  If ((currency == null) |) ("AED".equals (currency)))

  {

  row.setAttribute ("ExchangeRateTypeRender", Boolean.FALSE);

  row.setAttribute ("ExchangeRateDateRender", Boolean.FALSE);

  row.setAttribute ("ExchangeRateRender", Boolean.FALSE);

  }

  on the other

  {

  row.setAttribute ("ExchangeRateTypeRender", Boolean.TRUE);

  row.setAttribute ("ExchangeRateDateRender", Boolean.TRUE);

  row.setAttribute ("ExchangeRateRender", Boolean.TRUE);

  }

  }

  Public Sub initPVO()

  {

  OAViewObject appPropsVO = (OAViewObject) findViewObject ("xxCurrencyPVO1");

  If (appPropsVO! = null)

  {

  If (appPropsVO.getFetchedRowCount () == 0)

  {

  appPropsVO.setMaxFetchSize (0);

  appPropsVO.executeQuery ();

  appPropsVO.insertRow (appPropsVO.createRow ());

  Line OARow = (OARow) appPropsVO.first ();

  row.setAttribute ("RowKey", new Number (1));

  }

  }

  handleCurrencyChangeEvent();    / / If I comment on this call, there will be no null pointer when I click on the button Add a new rank and PPR will not be the first line when I select the poplist.                 

  }

  Public Sub createDetailRow()

  {

  String hdrId;

  OAViewObject hdrvo1 = (OAViewObject) getxxEcreditCardHdrVO1 ();

  OAViewObject dtlvo = (OAViewObject) getxxEcreditCardDtlVO1 ();

  Initialize and create a line of VO

  If (! dtlvo.isPreparedForExecution ())

  {

  dtlvo.setMaxFetchSize (0);

  dtlvo.executeQuery ();

  }

  Line dtlrow = dtlvo.createRow ();

  dtlvo.executeQuery ();

  int count = dtlvo.getRowCount ();

  dtlvo.insertRowAtRangeIndex (count, dtlrow);

  Development of the sequence for the number of request *.

  Number of dtlseq = getOADBTransaction () .getSequenceValue ("xxdm. XXDMI_ECREDIT_CARD_DTL_SEQ");

  hdrId = hdrvo1.getCurrentRow ().getAttribute("CreditCardHdrId").toString (); mind vo

  dtlrow.setAttribute ("CreditCardHdrId", hdrId);

  dtlrow.setAttribute ("CreditCardLineId", dtlseq);

  dtlrow.setAttribute ("LineNumber", count + 1);

  End of sequence generation *.

  dtlrow.setAttribute ("CurrencyCode", "AED");

  String currency = (String) dtlrow.getAttribute ("CurrencyCode");

  System.out.println ("CurrencyCode:" + currency);

  dtlrow.setNewRowState (Row.STATUS_INITIALIZED);

  } / / end createDetailRow()

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  Event string = pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM);

  * Treatment add line button *.

  If ((ADD_ROWS_EVENT. Equals (Event)) & & "AdvTblRN".equals (pageContext.getParameter ("source"))) ".

  {

  am.invokeMethod ("createDetailRow", null);

  am.invokeMethod ("initPVO");

  } //**End add row button *.

  otherwise if

  ("currCodeChangeEvent".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))

  {

  am.invokeMethod ("handleCurrencyChangeEvent");

  }

  ===========================================================================================================================

  Could please help what is wrong in the code, I followed all the steps as stated in the guide, but the table advance, the problem starts whenever I click on the button Add a new row for the creation of new line.

  I couldn't understand what was wrong with the code.

  Thanks in advance,

  Suman

  Suman,

  A few points:

  1. Why do you call handleCurrencyChangeEvent in the event to add a line? Simply set the useful, likely of the values in the line it himself.

  ex:-instead of calling the handleCurrenyChange method, simply add the below lines inside the createDetailRow()

  dtlrow.setAttribute ("ExchangeRateTypeRender", Boolean.FALSE);

  dtlrow.setAttribute ("ExchangeRateDateRender", Boolean.FALSE);

  dtlrow.setAttribute ("ExchangeRateRender", Boolean.FALSE);

  2. it looks like you have on the field of the currency and that fireAction handleCurrencyChangeEvent action method is called, right?

  Instead of using dtlVo.getCurrentRow, use the code below:

  public void handleCurrencyChangeEvent(String eventRowSourceParam)
    {
    OAViewObject pvo = (OAViewObject)findViewObject("xxCurrencyPVO1");
    OARow row = (OARow)pvo.first();
  
    OAViewObject dtlVO = (OAViewObject)findViewObject("xxEcreditCardDtlVO1");
  
    //OARow dtlRow = (OARow)dtlVO.getCurrentRow();
    OARow dtlRow = (OARow)this.findRowByRef(eventRowSourceParam);
  
    String  currency = (String)dtlRow.getAttribute("CurrencyCode");    // NULL POINTER EXCEPTION
  
    if ((currency == null) || ("AED".equals(currency)))
    {
    row.setAttribute("ExchangeRateTypeRender", Boolean.FALSE);
    row.setAttribute("ExchangeRateDateRender", Boolean.FALSE);
    row.setAttribute("ExchangeRateRender", Boolean.FALSE);
    }
    else
    {
    row.setAttribute("ExchangeRateTypeRender", Boolean.TRUE);
    row.setAttribute("ExchangeRateDateRender", Boolean.TRUE);
    row.setAttribute("ExchangeRateRender", Boolean.TRUE);
    }
    }
  

  In the controller:

  if((ADD_ROWS_EVENT.equals(event)) && "AdvTblRN".equals(pageContext.getParameter("source")) )
  {
    am.invokeMethod("createDetailRow",null);
    am.invokeMethod("initPVO");
  } //**End Add Row Button**
  else if ("currCodeChangeEvent".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
  {
    String eventRowSourceParam = pageContext.getParameter(EVENT_SOURCE_ROW_REFERENCE);
    Serializable[] params = {eventRowSourceParam};
      Class[] paramTypes    = {String.class};
    am.invokeMethod("handleCurrencyChangeEvent",params, paramTypes);
  }
  

  3. Why do you call initPVO when it is clicked on the Add line? Are you calling not just in the PR?

  You could call it once in the PR and let. When you call it PR, you may need to remove the handleCurrencyChangeEvent of this method call.

  See you soon

  AJ

• Premiere Pro creates new after effects project sending clips to AE?

  When you create a new composition in After Effects to clips on the timeline, Premiere Pro works perfectly well. Send clips to a new composition, the same project After Effects. All is well and good. Until I got close After Effects or Premiere. Then, when that I raise, clips in After Effects in a new composition, Premiere Pro sent something strange. Even if I reopen the project I was working on, no matter what, Premiere Pro sent clips to a new project and not send them to the one currently open. Does anyone have any kind of reasons as to why?

  Hi Instrud:

  Just to clarify: when you continue to work, After Effects is open with the file to current project open AE and Premiere Pro is open with the file to current project plans open as well.  Then, when you choose "Replace with After Effects Composition" your Pro first sequence, the current project of AE closes and starts a new AE project.

  All of which is managed by dynamic link and clearly something is off.

  I got to one of two things:

  • Begin a conversation with Adobe support to check that everything is installed and configured correctly on your system.
  • Uninstall the two Premiere Pro and Adobe After Effects and then reinstall them (something Adobe support would you anyway).

  -Warren

• Newbie question - how to set up the new sequence of 1280 x 720?

  Need to do a video class for Youtube & PP project still to learn.

  Read YT vid is 16:9 ratio, and a common frame size is 1280 x 720, but having trouble setting up of work area.

  for example. New sequence / select Widescreen 48 kHz, which is the format of the pixels is D1/DV... Image 16:9 720 poster size h, (where h is height right?... but no width)

  Once created, I look under settings of sequence and this watch frame size 720 Horiz and 480 green, gray & unchangable. Like all other fields.

  That's happened? I don't understand... How can I get 1280 x 720?

  Usually I drop a video on a new timeline, makes - me if I want to change the setting to match, but I have vids of 1280 x 720 for this project, some are bigger, some are vertical phone mobile videos. I tried to drop a jpg 1280 x 720 on a new timeline, but did not get this dialog box.

  I don't have the time to do a whole bunch of tutorials at the moment, hope someone can help make me it past this issue.

  Thank you

  You need to fix CS6 first missing sequence settings:

  Features and sequence presets missing | Adobe Premiere Pro CS6, first Pro CC

  Once you have done this, you can configure your sequence.