audio links

Similar Questions

• Can Apple TV 4 supported Wi - FI or a BlueTooth audio link to a sound bar

  Can Apple TV 4 supported Wi - FI or a BlueTooth audio link to a Soundbar?

  I tried to put this question to 'Apple TV' but apparently, it's the only 'Community' I can post to.

  As far I can tell the answer is no.

  I asked to move your message using Apple TV in the cases where someone there is more to say.

  TT2

• audio link works the NTDB in Server

  Hello

  I created a MP3 audio link that works in preview in the browser but when I put the file on the server, it does not work. I have no idea. Please help me.

  Celia

  It will search the MP3 file to

  http://www.Stonybrook.edu/workingclass/Conference/2010/Session1_1.MP3

  but cannot find.

  Is that what you actually downloaded the MP3 file in the folder named "2010" in the folder "Conférence" in the folder "workingclass" on the remote server?

• Window drive audio link to Windows Media Player

  Just refreshed to new PC.  Used to be able to listen to audio clips using a window of audio player (like Barnes and Noble).  But with the new PC, I get a msg "you need Windows Media Player.  Which is already installed.  When I "Launch standalone player" WMP will launch and play the music most of the time.   How to bind upward WMP in the Audio Player window as before?

  Hello jebe1133,

  ·        You try to play Audio content of online sites?

  When you try to play content online on Web sites, it will automatically launch Media Player.

  I tried to run the test of the barnesandnoble.com, I see that launching a plug-in to play Audio files, it doesn't have to be manually linked to Media player.

  Try also to set Media Player as default player for Internet Explorer:

  1. open Internet Explorer, click options.

  2. the tab programs, click on the tab Internet programs.

  3. you will get an option to choose Media Player, click Media Player and as a default value.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Question audio link.

  I'm an all-Flash website design.  I put an mp3 in my library and applied as an action to more State for the buttons on my site.  It is set to 'event '.  For some reason, however, the sound is played when I move the button, and when I click the button at the bottom?  I just want to more State.  How can I fix it?  Thank you.

  You can specify unlimited (well, up to 16000) States of button with a movieclip, but since there are a limited number of events of button, it would make no sense to have more than 5 to 10, and for the overwhelming majority of the movieclip buttons, you will have only 3 States: high, low.

  Click on insert, symbol, movieclip.  on the timeline of the movieclip frame 1 set a stop() and label the framework 'up' and put anything you want on stage for the graphics.  further down the timeline, create a keyframe with the label "over", set your sound, assign the stream property and use any graphic you want on the boards for your highest State.  further to the bottom of the timeline (AFTER the sound stops continuously), create a keyframe with the label 'down' and apply whatever graphic you want.

  You can then use:

  {yourbutton.onRollOver = function ()}

  this.gotoAndPlay ("over");

  }

  {yourbutton.onRollOut = yourbutton.onRelease = function ()}

  this.gotoAndStop ("up");

  }

  {yourbutton.onPress = function ()}

  this.gotoAndStop ("down"); or gotoAndPlay() where appropriate

  }

• Are there 2 seconds audio delay with Apple TV as with Airport express

  Audio reading of the Mac to stereo via Airport express has 2 second delay. If I replace the airport express to Apple TV and connect optical to HiFi audio link ATV still do 2 seconds?

  Welcome to the Apple community.

  I have no such delay when I play audio via an Airport Express station. You must determine if the problem is with your network or device that you have connected to the AirPort Express Terminal. I don't know what other hardware you have for you for you help in this task.

• Bad audio when the DVD player works

  I have an Inspiron 1520.  For years, that everything worked well.  Now, I'm having a problem with my audio.  It works fine when I play music or movies from files on your computer.  But when I play something of my DVD (audio CD or DVD) drive, the sound is very crackley and stuttering.  It also occurs if the DVD player works (i.e. burn a disc) and I play a file (movie or music) from my computer.  There must be some sort of link between what is happening when my DVD drive is rotating & my speakers or other audio link.

  Any help would be greatly appreciated!

  Try this. Go to http://winhlp.com/node/10 they have a small script program to restore the DMA mode. Click on the link in their 1st step. (Note: for best results, use Internet Explorer when you run the script vbs to step 1). Read the instructions in steps 2 through 5, and then run the program. He made changes to your Windows registry database to try to give (s) the use of the DMA mode. If you want to know exactly what the program does, scroll to "Reactivate the DMA using the registry editor" for the full explanation.

• Conference of the pendant project audio problem

  Hello.

  I'm doing a project. Everything worked well, but currently the project Conference pendant he no y son more.

  Yet the audio track appears normally and when I can read a rush or a music organizer, son is operating normally.

  Thank you for your help.

  dadoudesaintlaurent

  What version of Premiere Elements, what operating system? What are the properties of your Timeline content? Is the audio linked video in one file, or is this audio autonomous? Is the audio in stereo or 5.1 channel? What is the predefined project?

  I decided to give up the button translate, because I wasn't getting a good translation for "...". It is there more of son. »

  You say that in the preview, you lose sound (you can not hear the noise) or are you saying that the audio is not synchronized with the video?

  In the preview in edit box monitor, you read the timeline timeline rendering content? (Is there an orange line on the timeline contained during the preview?) Please confirm that the problem is only in preview and no problem with playback of export. That's what I understand the translation.

  Please consider and provide more information.

  Thank you.

  RTA

• Is it possible to lock either the video or audio track?

  I'm trying to copy and paste a short segment of audio to reuse in another movie.  From Pinnacle Studio, this was done by the video track of locking and the stretch of the audio track of the copy and paste in another part of the timeline.  How this is done in the first 14 elements?

  provlima

  What computer operating system?

  No locked track.

  What you want to do...

  a. a part of an audio segment in a project and then copy the use to use it in another project

  or

  b. use of a part of an audio file in another part of the same project?

  You cannot copy and paste insert between projects in Premiere Elements except on Windows, then it is ClipMate associated with Premiere Elements.

  First Elements ATR troubleshooting: PE: ClipMate copy/paste between projects

  It should work for first 14 elements, but I have tested until 13/13.1.

  Rather than cut the audio on the timeline to get the segment for copy/paste, consider to drag another instance of the audio on the far right of the timeline, make your cuts it and dragging the Cup in place within the same project.

  Depending on what you want to do, you can set the gray tabs on the work area bar to span the audio segment of calendar you want. You don't have to break the video audio link. Then go to export & share/Audio/WAV and critical put a check mark next to the share of work area Bar just before you click Save. Then import this segment since the disk hard saving location in your Premiere Elements project using the project add Media/files and folders.

  Please consider. If any questions or need clarification, please ask.

  Thank you.

  RTA

• Surface-mounted with audio synchronized PluralEyes

  Hi - a bit of a newbie here... Please bear with me!

  Yesterday, I shot a few videos with a shotgun microphone from rode to the taking of microphone in camera on a Canon HFG30 set to use the external microphone of cameras to record.  This was sent by hdmi to the NInjaBlade.  I also recorded separately on a Zoom H6 recorder using the XY microphone.

  I used successfully PluralEyes to synchronize the audio tracks.

  I have 90 minutes of recordings and want to create subitems/clips that I can move me around, intersperse with another content etc.

  If PremPro subelements are the more useful approach, how can I get the synchronized sequence of master in the source window to create points of e/s that would allow me to create the subitems?  How can I associate the track synched Pluraleyes for the soundtrack of video/hdmi so that the IO brand clipping selects the external audio synched and includes it in the subitem?

  Or maybe there is a better way all together... or a method step by step to achieve this.  I guess I could use the blade on the main sequence, but that seems rather destructive and could limit my ability to re - edit trim positions.

  Any help/advice would be so appreciated.  Does anyone have a workflow that will allow them to share?

  Thank you very much

  Andrew

  Since nobody has jumped in to offer any assistance, I thought that it would be useful to other newbies like me to share my last two days of effort to try to come up with a workable workflow.

  So at the beginning, I got excited with the help of prelude to generate shorter clips that I knew that I would need the accumulated gross video.  So I opened each file in prelude, created for subitems along the timeline to match these areas, I want to save.  I then created a scripted, added the subelements, then exported the first edit to create a new folder of transcoded files.  Then, I took this clips folder and tried to sync it with the audio files using PluralEyes.

  It does not, because a lot of my clips were short (less than 5 seconds) and this inhibits the algorithm of PluralEyes to be able to find exact matches.

  Back to the drawing board!

  So I then synced all of the original video files (i.e. cut / edition) with the external audio using PluralEyes and it has exported to the output file standard .xml.

  I imported it directly in PremierPro and he gave me a long unique sequence that was all spaced appropriately along the timeline.

  Then the Epiphany... based on my knowledge of the use of assemblers of cinema to work!  The secret is to isolate and remove what you don't want, rather than trying to isolate and record what you want!  So, I went along the timeline creation of entry/exit points to cover the areas of junk.  And used the Extract tool to remove the unwanted stuff.  This resulted in a timeline of the individual clips with audio link internal and external to the video.  Because I didn't define the markes IO such as a few additional images were available at the beginning and end of each clip search, can I know enter each and refine the garnish on an image by image basis.

  Wow I did it!  I don't know that there are other, perhaps better ways to do this (it seems that Prempro always offers several ways to get to something!)... .but this workflow works for me and I will continue to use it until I could better!

  I hope it's a value for at least one other person there!

  Andrew

• First - moving Audio files in increments less than a picture

  Hi guys,.

  I was wondering if it is possible, in a first sequence to move audio files in increments smaller than a single image.

  Select "Show audio time units" in the menu (at the top right in the timeline panel) timeline you need to break the audio link to any video track as the video can move frame by frame

• Stripping on an audio track to 8 PE

  I did a search on this topic, but can't find an answer, even if I have to believe that it was taken at a point.  But I use first Elements 8 and I would like to remove the audio of the videos as well as others can make use of audio.  How can I do this?  I see that I can break the audio link of the video, but I don't see how I actually take video on PE 8 so I can use it as a MP3 file.

  Also, I guess that even if I "Strip"on this track, it's really always there with video. "  Is this correct?

  Thank you.

  To produce an Audio file only in your calendar, you would share those ideally PCM/WAV, with disabled video export. I've never had before 8, so you will need to me check out on all this:

  1. Go to the tab share and choose computer staff
  2. Choose a MS AVI (DV-AVI)
  3. In the Options dialog box, uncheck the export video - leave checked Audio export
  4. Decision time - do you want Audio, or only certain parts of the entire timeline, in separate files? In the first case, leave the range on any timeline. If the latter, then adjust the WAB (work area bar) in the course of what you want and choose the range: workspace toolbar. Repeat this process for each individual item of Audio you need.
  5. Audio (left), check that the settings are: uncompressed 48 kHz 16-bit with compressor value. This will result in a high fidelity PCM/WAV file.
  6. Don't remember if PrE 8 had added the MP3 Compression CODEC, but check. I love PCM/WAV for high fidelity and don't like MP3 Compression, BUT that does not give rise to a smaller file. They just don't sound as good.

  Hope that helps and good luck,

  Hunt

• Dynamic link to After Effects, handles

  Hi everyone, I apologize in advance if this has already been replicated in another thread.  I had a good glance and then discussions were referring to this, no cover the specific problem I have.

  At first I had the same problem that a few people have had - when I click right gripper in my timeline first and selected "substitute after composition Effects", I was confused and embarrassed as to why my transitions not working first.  I understand now that it of to do with handles (parts of a clip before the in and after the exit points that allow to do things as cross dissolves right?) and the fact that dynamically linked clips AE do not automatically counts for them.  The original video clip is long enough to deal with transitions but my dynamically linked clip starts and stops at the points of entry/exit, me leaving not enough spare executives to cross dissolve.

  OK, so finally my question.  Is there a way, when dynamic linking, to do AE account for handles?  In other words, to make enough of the original clips, lets give him enough on each side of my entry/exit points that I can still cross dissolve?

  I would appreciate help with this.

  Thank you!

  As your clip you wish to replace it with AE composition can be fairly complex piece of several nested sequences, and you is not forbidden to have other extra video and audio in the timeline panel, it's easier to do some preparatory work in PrPro full:

  1. Select clip you want to replace it with AE composition and paste it for example in the slopes above and below

  2. develop according to your borders of transitions and then replace with model AE

  

  3. When you have finished your magic in AE, select this very scenario PrPro you initially want to replace it with model AE (if you want to keep your original audio intact, break video audio link first).

  4. Select your model dynamically linked in your project Panel or Source monitor, keep pressing Alt/Opt and then drag the clip selected in the timeline panel - it preserves your transitions to disappear (if you want to drag just video, only video perlace of the Source monitor accordingly)

• Audio management with animation and advanced actions

  Hello everyone,

  I actually try to use Captivate in order to show that a screen with several animations appear one by one with the following procedure:

  http://blogs.Adobe.com/Captivate/2011/05/adding-multiple-click-based-animations-on-a-scree n-with-adobe-captivate - 5.html

  But, I have a voice audio associated with the slide itself, and files audio link to each imported animation.

  I would like to cut the 'master' sound to listen to only a particular sound.

  You have an idea on how to do something like that?

  Thank you very much

  Best regards

  F.Bo

  Hello

  You cannot achieve this with the audio of the slide, but if you attach the audio to an 'invisible' object (perhaps a rectangle with fill transparent and no respect), you can control the audio using actions advanced to show/hide this object. This is how I realized several effects in my last blog. If I want to control audio that I will never insert as slide audio.

  Playtime with audio and widgets

  Thus, the workflow would be to hide animation with its seal and show the invisible object, which now plays the previous slide audio. When the user clicks to see an animation, attach an action to this box click (or button) that hides the invisible object and shows the animation.

  Lilybiri

• Binder/sync Audio and video

  I think I'm right on the right edge if this can work:

  I have a rough cut of a few clips using audio on the device. I also recorded with a separate audio recorder. I want to sort a secondary audio link to the primary audio and video clips from the source, so that the secondary audio will be added for the first mounting without having me to go and re - synchronize each change with the corresponding secondary audio. Is it possible to sync the audio added in a source file and have a reflection in an edited sequence?

  Aligning each camera with audio clip associated with its own sequence, then changing using these sequences rather than the original clips is one of the best ways to proceed in the light of your starting point.

  Audio drift should not be apparent on reasonable periods of clip (for example, up to 10 or 20 minutes) depending on the stability of the clock in the audio device.  Many reports were due some manufacturers using audio rates slightly non-standard who first then supposed to be correct and therefore generated out-of-sync issues for about 30 minutes or more.  Not your problem here.

  If, when you check the sync audio on a full clip, you know it's OK at first but in the end, then setting a marker for both video and audio at the end and using the rate stretch on the audio to change its length by a small amount to align the markers should give good enough sync for the clip.