Audio only plays when started from the beginning?

Similar Questions

• Audio will play not except from the beginning

  Hi, I am currently learn to animate using Flash CC 2014.

  So, I understand that for import audio in Flash, you create a layer for it, I did successfully.

  But my problem is that I've seen in the past (in flash animation tutorials), if you look at the timeline of the animation, you can hear audio playback from where you were and if you highlight, you can even hear the sound scroll and backward with your mouse.  But when I do, I don't hear anything.

  I can't hear the audio if I play the animation at the beginning, but if I'm going to be animation and synchronization of the lip, he'll grow extremely painful for me to have to play through the entire animation to hear what I have to animate then.

  Y at - it a fix for this or is there a setting I need to apply so that audio that I imported cheek whenever I keep the playback head?

  I use the Flash on a Mac if it is any help as well.

  Thanks in advance for any help or advice.

  You target ActionScript or HTML5 Canvas? If AS3, you can select a setting where audio exists and in the property inspector, choose to have the sound 'stream' that synchronizes upward well as you wish. If the target of canvas, you can choose only the types of sounds 'event '.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• You can change a song somewhere in the Middle rather than start from the beginning?

  You can change a song somewhere in the Middle rather than start from the beginning?

  Hello Gene,

  Currently, there isn't a way to do. It's a great idea and we will certainly look at it later!

  Thank you

  Bronwyn

  Community Manager for first Clip

• can I restart my mac - pro to start from the beginning I / ve he had only 2 days and I think that I / ve screwed it up

  can I restart my mac pro from the beginning.i/ve really messed it .i/ve only had 2 days.thanks

  A new Mac comes with 90 days of free technical support, AppleCare.

  Please call AppleCare.

  AppleCare: 1-800-275-2273

• only the wallpaper don't start menu icon or start from the beginning. How can I solve this problem?

  This problem happened very suddenly... Everything was fine the day before. Thank you

  It's a good start.

  Think the process explorer.exe as your office.  If it does not work because the file is missing, you will have no office or the taskbar, or start button until it runs, so you need to replace.

  c:\windows\explorer.exe file should never be missing.

  It is even difficult to remove on purpose since it's a protected Windows file.

  You haven't told us your situation Antivirus antimalware software, but I suspect whatever it is (effectively deleted) quarantined your explorer.exe file.

  Since it is a protected file, there should be a copy backup of the file in this folder:

  c:\Windows\System32\dllcache

  or, depending on your installation, you might find a copy in this folder:

  c:\windows\ServicePackFiles\i386

  You must use the Task Manager to click file, new task, browse... and navigate to these folders and search for a backup copy, and if you find the explorer.exe file, copy (Ctrl-c) and paste then copy it (Ctrl-V) in the c:\windows folder where it belongs to replace the missing file.

  Since it should never miss, the backup copy may also be missing, so I put one on my SkyDrive do you can download (sinus your Internet Explorer works) and replace the file c:\windows\explore.exe.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called explore when the name of the file should really be called explorer.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  You could also get a copy of explorer.exe from a working system and copy it to a floppy or USB key and use the Task Manager to browse replace the file (in two places)

  When the file has been replaced, use use the Task Manager to run this command again:

  %windir%\explorer.exe

  (%windir%\System32 is the c:\windows folder)

  How is it now?

  If it looks good, reboot and then run these scans:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Hi I recently transferred my mini iPad iPad pro data now all my game data is lost on both devices. It starts from the beginning of the games. Consedring I played all the games for 2 years, it's really sad. Any advice?

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro. Now all my game data was lost. All of my achievements and waiste game purchases. All my games is in the stages of early on both devices any help?

  Blazeyboy wrote:

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro.

  How do you transfer the data? Do you have the old iPad to backup and then restore this backup Pro iPad? Have you followed these steps?

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Message error "GFXUI has stopped working" when starting from the laptop to the top, running Windows 7

  Hi guys,.

  When I start my laptop there is a popup saying "GFXUI stopped working.

  Please tell me what to do...

  Thank you

  Ajay

  The seams of this file to be part of the Intel graphics drivers [1]. Install the latest Intel graphics drivers to fix.

  André

  [1] http://answers.yahoo.com/question/index?qid=20100208064051AArbWBM

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Recovery USB key comes with write protection error when starting at the beginning of recovery

  I just got my key USB recovery flash in the mail from HP.  I have an ENVY 15 t-j100 Quad and I had accidentally wiped the OS off the coast of the SSHD.  I go into the BIOS, change the boot order, even tried disabling and enabling legacy mode secure boot and I get the same error once I have tell the laptop to boot with the USB key.  He comes up with an error cscript.exe and says that it is impossible to write in the C: disk because it is write protected.  I can cancel, try again or continue, but the laptop stops just after these buttons.

  Any help would be appreciated.  Thank you.

  Ryan

  I had set up the SSHD acceleration and 24 GB cache in a RAID0 configuration, as if it was before I wiped the OS.  Apparently, which caused the error, because recovery what USB works fine once I reset both drives non-RAID configurations.  I'll be able to put back them in a RAID0 once the OS is installed?

• Music / sound plays from the beginning

  I'm starting a new Flash animation (I've not used the Flash in a few months, but it says it is updated), and for some reason, I've added music, will only play if I start from the beginning of the timeline. If I start from anywhere in the middle of the timeline, after the departure, the sound is not reading at all. What is going on? Can it be fixed?

  What you describe would be the case if you have defined a test of properties. Change that to the stream.

• Restart slideshow from the beginning

  I just bought a DPF-VR100. When it is disabled, then it seems to restart the slideshow, everywhere where he stopped the last time. I want to start from the beginning each time. How do I do that? I couldn't find this setting or all instructions in the manual. I have the photos and music in the memory. The photos are classified in the index of the way I want them to appear.
  Thank you!

  Hello and welcome to the forums.
  This is a normal operation. If you turn on the photo frame off the power during the slide show and back, the slideshow restarts from the last image read. Unfortunately there is no adjustment for the slide show restarts automatically after the next power on.

• audio is launched from the beginning of the song little matter where I click in the movie timeline to start playing?

  I need the audio to help the photo calendar synchronization. However, no matter where I start playback to check a second time when a certain image, audio ALWAYS starts again from the beginning of the song! How can I stop this?

  Since you have posted in a forum XP... I'm guessing that you're
  using Movie Maker 2.1?

  If you drag the playback indicator (vertical line with square
  at the top... Rest the pointer on the square and drag)...
  the music should start playuing.

  Unlike the video track... you can click left/make dragging clips
  the audio left and right. And you can change the
  duration of a single photo on the timeline manually. Move
  your pointer autour in border of an element until you see a
  double red arrow. Now drag the double red arrow... you'll
  display a ToolTip that shows the evolution of life.

  Articles that offer information about audio sync with the video

  "Collections of projects".
  http://www.Papajohn.org/newsletters/024-Collections.html

  Study the rendering of DV - AVI files
  http://www.Papajohn.org/newsletters/048-StudyDV.html

  Editing film 'Basics '.
  http://www.Papajohn.org/newsletters/139-EditingBasics.html

• So why make a movie in movie maker, the only way to get the song to play with the photos in sequence is in play from the beginning?

  I am trying to edit photos to last for some parts of the songs (fade in and out where I want to that they), but the only way to see what the photos of 'falling' in the song by playing the song from the beginning. Every time. It won't let me go to a certain section of the timeline and play both the photo and the song at that time here (it takes me to the photo, but he began to play the song in some random place)?

  Thank you very much!! =)

  Hello

  Once you have added music, go to the Options tab. Now click on Split (in fact the split music) you should see the music bar along the top of the film split.

   

  Audio setting in Windows Movie Maker: frequently asked questions (valid also for Windows XP)

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

  See also: http://windows.microsoft.com/en-US/windows-xp/help/movie-maker/faq

• RAM Preview does not play from the beginning

  Anyone run into this.  When I RAM Preview, it does not start video playback up to about 1 second at first.  When loops overview it plays from the beginning, problem is only with the first reading.  Annoying to say the least.

  There is a bug in Mac OS x v10.10 (Yosemite):

  After Effects Mac OSX v10.10 (Yosemite)