Audio plays in the mess and with drops when I use .mp3, is set when I convert it into .wav. Someone knows why?
I have audio files I import into AE, wishes to use. MP3s, but have a problem with them playing in the mess and most of the audio plays do not at all. Also the sound that plays does not match the waveform.
I have batch save files as .wavs to the difficulty. But I was wondering why this is happening.
In order to better clarify the MP3 format is highly compressed and has been designed to provide a faster reading on a network. Format takes all samples and looking for similar values, so he doesn't have to store each bit of data for each sample. Then a table is built which said the sample currently has the same values as the sample at that time there. This table is parsed by your CPU and audio is reassembled into sound kinda sorta corresponding to its original. The higher data further reading is to the original.
When AE leans on a MP3 player and start decoding of information, combining this with the other audio that may or may not be compressed, and mix all these calculations with the treatment effects and pixel data, MP3 decoding was sometimes out of sync simply because there is no comprehensive audit in MP3 format which ensures that the audio stream is rendered in the correct order when in the CPU clock cycles are overloaded with other processes. An MP3 player can even skip and stutter when played on an iPod, if you are at the limit of storage and execution of something else in the foreground.
Any lossless or uncompressed audio format does not work like that. Sample 1 contains all the data for this moment, sample 2 too and so on. There is no audio samples that does contain all the data so that things don't get out of use when the CPU is stress because they cannot (or at least, it's much more difficult).
It goes the same for video streams highly compressed in the production pipeline. You will always have better results if you convert to a frame without loss or close based lossless format.
Tags: After Effects
Similar Questions
-
Audio comes through the speakers and headphones plugged headphones
Audio sound plays through the headphons and speakers when headphones are connected.
Any advice appreciated
Hello again Nervuz,
Thanks for the quick response!
Based on the information you have provided, I recommend to uninstall and reinstall the audio driver for your desktop. To do this, please follow this document on follow-up with the IDT High Definition Audio Driverdownload and software uninstaller (Windows 8). If this does not work and you hear again audio to both the speakers and earphones, please follow the next step.
The next step is to run a diagnostics using Automated Troubleshooting (Windows 8)program. This should help with the audio in question.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
Is there a way for EA to automatically save the audio files in the project and publish directories & json? Thank you
Bob
good edge would not copy all the external files that you have added to your project in the publication of record, you should only do copy paste your files and folders created by your self after publication!
and I can not undrestand "Unlike you, I'm not that qualified and often make mistakes that make some of my totally useless code retries." You can save your project every time with the new name to have your previews works!
and on the withdrawal of your symbols that uses the name of the class, you're hurting, you should do it this way
SYM $(".) Preview"). Remove();
and that's why you can not make it work
If tehre is any question feel free to ask me questions
Zaxist
-
CCleaner shows a plugin in Firefox without the name of the program or the Publisher and with a version number of '0', and it can be disabled or deleted. It is a plugin for Firefox by default, and if so, what do I do? It does not appear in my list of Firefox addons in Firefox and a malware scan does not detect.
It is possible that the profile has become corrupted, and you can try to start a new profile.
-
WINDOWS HOTMAIL
My Hotmail has recently begun to generate drafts and get into my project folder with the title 'unknown '? Someone knows why?
Any Hotmail questions belong to http://windowslivehelp.com/product.aspx?productid=1
-
my pc is played to the top and I want to uninstall windows 7 and then reinstall it without losing all my software already installed. Is this possible?
Boot from the Windows 7 Desktop
Insert your Windows 7 installation DVD
Click Install now
When the installation menu appears, click on "Upgrade".
This will upgrade your existing installation during the updating of the existing system files. Your personal files, settings, and installed applications will be preserved. -
I made a music video in Flash and it won't play on the timeline, and I can't scroll through it either. He plays when I press Ctrl + Enter, but not in the timeline panel. It worked perfectly before, but now for some reason it doesn't. Help, please
It is the nature of the movieclips. They play only when you make a film Test. If you want an animation that plays when you scrub the timeline, select the element and change it to be a chart instead. You can do this in the properties panel.
-
I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems
Thank you
PeterHello
The easiest way is with a crossover cable - a special wire to connect the two systems.
You can get one at your local computer store - they are not expensive.Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
set up the network.====================================
Or you can set up a wired or wireless network.
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlAd-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htmNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
computer will automatically connect to IE start up how can I stop this.
When I would use the computer and open IE when I'm ready to use it.
I have a ZYXEL router.
This has happened only since I checked a pop box that says connect automatically very stupid, I know, but now can not cancel.
help please
Hi Tansy,
Thanks for posting your query in Microsoft Community.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
I understand that you want to disable the open Internet Explorer at startup option.
Method 1
Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeStep 2: If the problem is solved in SafeMode with networking, then I suggest to perform clean boot and remove the program that is causing the problem.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135
Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.Method 2
I suggest you run virus scan online by using the Microsoft safety scanner.Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote:
when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.See also: Stop a program from running automatically when Windows starts
http://Windows.Microsoft.com/en-in/Windows7/stop-a-program-from-running-automatically-when-Windows-startsThanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you
-
I have a serial number and request code when I bought Adobe Acrobat of TechSoup. For some reason, I can't post it after the download, and now I can't use it yet at all. Please notify.
What is the exact error you get when you enter your serial number?
Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
I can't download anything, when I have the page with four blue square bit he never move forward. Maybe, someone know why? Thank you!
Please try another web browser, or delete the browser history and cookies and the same retry.
Hope this will help you.
Kind regards
Hervé Khare
-
Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?
While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?
If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.
Best regards
Q
Hello
It may help to place your watch in mode do not disturb before driving:
-On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.
You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.
-On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.
To send comments and/or service requests to Apple, you can submit the form here (all comments are read):
https://www.Apple.com/feedback/watch.html
(This is a supportive community focused on user - you don't talk to Apple here).
-
Why can't an iBook on iTunes in South Africa? They promote the iBooks and iBooks author on their Web site, but it seems that SA is not on the list of countries of distribution. Free IBooks are not available. Someone know why? Thank you.
Liz...
According to Apple eBooks aren't yet available > > I can buy on the iTunes Store in my country?
Simply because Apple makes the promotion of iBooks does not necessarily that they are available in all locations.
Sorry!
-
Hi I have a compaq mini 110 I forgot the passwword and it prevents me from using the machines please help this serial number is
IT SHOWS THE FAILURE OF THE SYSTEM ORDER CNU9418FNF FATAL ERROR PASSWORD CHECKING
Enter: e9lov3u898 (3rd character is a lowercase L)
Kind regards
DP - K
-
Hi there, on my pc (windows xp professional service pack 3 - American version) and I can't find the entrance to the Icelandic keyboard for my pc, I tried the usual stuff on the web, and I still can't use it.
Here is the download what you are looking for. Please rate me upward if you find my post helpful. Thank you!
Maybe you are looking for
-
I don't know what happened. Last night before I SLEEP, my touch pad was perfect. In the morning, when I checked my touch pad, it was broken into pieces in itself. I wonder if it is the problem of the quality of this product. How can I fix it?
-
How can I load computer my videos corder cam
I have Windows XP operating system. How to download videos from camcorder to the computer so that I can convert a dvd disc? I have also 1EEE1394 cable to go from JVC camera to the computer. Any ideas out there? Terry
-
wanting to make a bootable iso of my c/p for Reload case of a crash
I would like to know how I could make a Bootable Disk in an img or an iso of my current p/c.or what told me an img gohst of my pc. I hope that this is possible. Thanks BAM
-
Can someone help me install this Huawei E160 USB dongle, such that it is impossible to find the drivers. have done all the control panel Modem USB things uninsatll and that the dongle is regarded as mass storage device but no modem with 4 hours of 02
-
HotSync of Palm M515 of replacement
I've been using Palm for many years and the death of my previous machine I bought a second hand M515- I tried to hotsync with Palm 6.2.2 that is on my computer and that contains my personal data... It seems to be a binding problem here that Hotsync d