Audio separate from a video clip to use separately

Similar Questions

• How to slow down the sound from a video clip to the exact time (keyframes) and values?

  How to slow down the sound from a video clip to the exact time (keyframes) and values?

  I used the timewarp, but the sound is not affected.

  It is to be expected. Only the native time remapping affects sound, but given that EI is not an audio processing application, the quality is terrible. You must use the hearing or a similar program.

  Mylenium

• I tried to copy several items which are separate from any application that I use.

  I'm updating (OS X v. 10.11.6) on all the improvements etc. use only the desktop iMac & use most of the time, & Contacts 'Pages', 'Safari '. In addition, I'm a 'ole' jerk who uses 1 finger of each hand type & am very slow; & I'm in a w/Chair with other disabilities, hearing, etc.

  N ° 1: I tried to copy several items which are separate from any application that I use. As the "second word through the fourth word, then somewhere further down in the same app anouther Word or group of words and so on."

  No. 2: I tried to connect you 'communities' and after several hours and a lot of frustration, I tried to get a new one, and that's how I found myself here!

  I would like an answer to #1, if you have any info that I can use. Otherwise, I'll try something new tomorrow.

  Thank you

  Bill C.

  < post branched out by host >

  Hello Warcloud7

  1. Double-click the first word of your desired channel
  2. SHIFT, click after the last word in the string to highlight the word two by four (see screenshot)
  3. COMMAND double click on another FIRST word "later on."
  4. SHIFT-click after the last word you want
  5. COPY however you are comfortable - Edit menu or command + C
  6. switch to some other app that you like
  7. Paste your favorite way

  

• I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  I'm trying to get audio only from a video. I went to record audio only: (as shown) and there is no ' audio only ' click. do I have to upgrade the machine to live music, and if so, how?

  If you are looking to get audio only from a YouTube video, all you need to do is read your video and while it's going to copy the link. Then on another tab, open listentoyoutube.com. Just follow the easy directions and paste the link.

  Hope that helps. I found out a month ago and I have 4 CD made from these audio files. There is a lot of fun to find obscure stuff and making CD of songs.

  Jon

• Cannot read audio from a video clip via external USB interface

  Problem - when I try to play the audio on my iMac to a video clip in Lightroom cs6 my interface usb audio, I can get sound via audio integrated, even if iTunes play through fine audio interface.

  Hi jeffreyc;

  Well, its something related to some settings within your mac under the sound option.

  Kind regards

  Mohit

• Loss of audio when you import video clips into PrE12 of Nikon D7100

  When you import video clips into pre 12 from organizing the audio becomes uneven (guard droping in and out).

  Clips will play finme in Movie Maker and his plays ok if played within the Organizer, so I know they are. He PC is using windows 7.

  Taken the Nikon D7100 1920 x 1080 30 p (29.97 real rate).  Film are displayed as. MOV and Document Type video/quicktime playback of other threads and works wonder if the question relates to the project settings.

  Digital SLR Edit Mode project settings;  Time Base 29.97 pictures / s; Image size 1920 x 1080; Pixel Aspect square; Calendar-view Format 30 fps drops;  Audio sample rate 48000.

  Can someone tell me what settings should I use for a Nikon D7100.

  Thank you

  Popeye

  What are you - right click the icon on the desktop for Premiere Elements, and then select run as administrator? If so, please return to post 3 where I wrote

  You definitely need a user with the privileges of the administrator account. QuickTime as well as Premiere Elements require that. Sometimes a run as administrator (right-click the icon of the program Office) and selecting run as administrator can help. Please check it out. The permissions are important.

  RTA

• Windows Movie Creator... can rotate you the image from a video clip?

  Need help

  Anyone know how to rotate the image on a video clip... the voice and image are therebut photo is on its side

  Need help

  Anyone know how to rotate the image on a video clip... the voice and image are therebut photo is on its side

  =====================================================
  If you use Vista Movie Maker 6...
  There is an effect that can turn the video.

  See the following article:

  Movie Maker-
  How to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

  If you run Windows Live Movie Maker.

  See the following article:

  Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
  http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/

  (scroll down to: rotate and convert the)
  Video with Windows Live Movie Maker)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• First step: changing video clips before using them in a longer video?

  I'm an absolute beginner.  I bought the first Elements 7 and I bought the first Bible and read that.

  My question is, first appears to be software designed to help you create a video show by joining photos, audio clips and video clips.  Is there a step before this, however, namely editing the clips they come out your camera?

  I have been using PhotoShop for years, and in general when I take a picture I open it in PhotoShop and adjust the saturation, brightness, sharpness, perhaps white balance, rotation, if necessary, etc.

  Is there another piece of software designed to help make this kind of basic changes to a single video clip?  For example, if the clip came out too dark, is it possible to clear the air?

  I would appreciate the answers really, and if there is a book or an article that you might suggest about editing video clips I would be recognizing the recommendation!

  Stephen,

  If you talk about making adjustments in the process of import - similar to the bridge or Lightroom - so I don't think that there is a first equivalent. I could be wrong, but I don't think that first will do, it won't be WinDV or Scenealyzer (other popular tools of import).

  However, once you have your captured clip and in a project to create, you can do ALL KINDS of settings. For example, if you right-click on a clip and do appear the properties panel, the 'Image' control has settings for brightness, contrast, hue and Saturation. You can apply to the entire element, or use keyframes to apply different settings.

  By clicking on the 'effects' brings up even more options... Gaussian blur, channel mixer, B & W, many many others... You can even make masks in Photoshop.

  So in other words, you cannot make these changes through the ingestion of your material (as you can in Photoshop/LR), but once you get the first video will do much the same things as Photoshop.

• Audio only on a video clip

  Hello gang,

  Hope someone can answer this question.  A series of video clips I took more than a week.  After I started putting them together, I somehow 'lost' video.

  They appear as a video clip in the menu screen, but when I play them it is only the audio portion that appears.

  Then after that I let him play the clip 'loses' video photo associated with the item and displays the note "audio".  so I guess its now a

  audio clip and I lost my video?  Any ideas of the smart crowd?  I'm certainly not in this group.  very novice! \

  Thank you

  coach

  I was able to set up video clips, edit them (using PE7) and save them as a project.  A few days later, I went to see and they appeared as audio only.

  Coach,

  These two lines make me wonder a bit. I wonder if you are looking at and try to play the appropriate files. Let me give a little background, just so that we're both on the same page. First a few questions: when you have transferred the files to the SD card, what format they appear like? Where you copied them? Would you download and install G-Spot. Run one of these files that you copied to the SD card, and see what this program shows, expecially high to the right of the screen, where the CODEC used is displayed. There will be both the 'name' of the CODEC and the complete specifications of it. This info may contain a response for us. Then look at the bottom left of the screen G-Spot. You will see two columns of squares, with the number 1 in them. One is for video and one for Audio. Press the #1 for video and you * should * get a box below, with #2 inside. Hit and you * should * get a box with a #3 in there. Yet once, hit #3, and you'll get a tiny Viewer at the top left of the screen. Your video * should * play. You may also make the Audio too.

  Now for the info: PE, when you save, you don't save a project file with the. Extension PREL. It's only a database, without media inside, only the links to the media. There are also some consistent Audio files that appear in the folder structure of project of the MOU, which will have the same file name, as your media files, but the. WAV extension. These are only the Audio files. There will be a lot smaller files there, with. PEK extensions. This is the display of waveform.

  PE is a non-destructive Editor, because it does not change the original media files. They * must * be intact, as you copied to the SD card. It would be easy to play accidentally, say standardized Audio files (remember, the same file name, but with the.) Extension WAV*). You * should * be able to play your original (actually copies you made of the SD card) without problem. If they play only Audio, and that you have opened the right files, then you probably don't have the right CODEC on your computer. That's what the paragraph two is all about. and we will have the answer.

  Let us know what G-Spot and good luck,

  Hunt

  * If you have your operating system files Options to not display file extensions, please change this setting. You definitely want to see the file extensions, especially as many of your files have the same file name, with NLE work.

• How to export an image from the video clip of the first Pro to Photoshop for corrections and back.

  I want to export a video clip in Premier Pro on Photoshop for minor corrections throughout, then back to the first Pro. Corrections will be the same for each frame in the video. What is the best way to achieve this? If it makes any difference, I work with clips of R3D monochrome 6 K.

  Hi TR.

  Try to import the file directly in Photoshop. If this does not work, report.

  Thank you
  Kevin

• How do remove you audio from a video and then use an audio of a different video to put in the first video?

  I have a video with good quality video but audio very bad, but I have another video of the episode even with the bad video but the sound quality. How can I remove the audio good video bad and replace it in the latest version of Windows movie maker on Windows 7 with audio video bad?

  Basically, you need to capture the sound quality to a separate mp3 file outside the filmmaker and then delete the wrong audio track and the good idea of layering.

  According to the source, this could be as simple as recording audio reading even if you end up with poor quality than the one you want to replace. If a file, it is possible to upload a video to mp3 converter.

• First do not insert audio track when inserting video clip

  I just got the 2015 CC (updating FCPX) first of the trial about 10 days ago and so far I love it. I ran into this problem when I insert a video in an audio clip with her is not in the sequence. I made sure that the video contained audio and he did. I even re-inserted a clip I had previously entered with the audio, and this same clip was not inserted with audio.

  Here's a video for a better explanation of my problem: first question? -YouTube

  Any help will be great!

  Thank you.

  You forgot to patch source audio track.

  

• Audio disappears from the video file when they are imported, please help!

  Hello

  When I open a new project and create a sequence, usually I import a. File video TS that automatically gets a blue label. When I hang out in the sequence, the video will appear in a video slot machine and associated audio appears in an audio connector. However, lately, about completely random, when video files I import them, they come with a purple autiomatically label assigned to them, and when I drag them on the sequence, there are only videos or sound only. PPCS6, when I go into the properties of the video in the software, records that the. TS file has any audio associated - yet when I look at the file outside of the software, it is very good and has the audio.

  Can someone help me please? It's quite urgent and I would appreciate it.

  Thank you.

  Update: just installed the update, did not know it was there! It seems to have corrected, thanks for letting me know! I hope that it doesn't yet, but I'll be sure to come back if she does.

• Creating space where video clip can pass, but cannot go away from this area

  I want to do something first film line mobile must in second video clip, but can not go far from second video clip.

  stage.addEventListener(KeyboardEvent.KEY_DOWN, starMoving);
  function starMoving(event:KeyboardEvent):void
  {
       switch (event.keyCode)
       {
            case Keyboard.UP : star_mc.y-=10;
            break;
            case Keyboard.DOWN : star_mc.y+=10;
            break;
            case Keyboard.LEFT : star_mc.x=star_mc.x-10;
            break;
            case Keyboard.RIGHT : star_mc.x+=10;
            break;
            default:
            break;
       }
  }
  

  So this is the code to handle the first movie clip... I can go anywhere on the scene...

  How can I do, then the first clip from movie sets just in second?

  Thank you.

  Whenever you move, you must test the extensions to see if you are still within the limits. I'll use the right for an example, you can do the rest.

  case Keyboard.RIGHT :      star_mc.x+=10;     if(star_mc.x + star_mc.width > containerClip.x + containerClip.width){          star_mc.x = containerClip.x + containerClip.width - star_mc.width;     }     break;
  

• Windows Movie Maker-how insert a picture in a video clip

  Inserting images in video clips

  With movie maker, is it possible to insert an image in a music video without the audio from the video clip stop. Basically I have a video of people talking. I want to keep the audion running and superimpose a picure in the video.

  Inserting images in video clips

  With movie maker, is it possible to insert an image in a music video without the audio from the video clip stop. Basically I have a video of people talking. I want to keep the audion running and superimpose a picure in the video.

  ===================================================
  For the timeline, drag a second copy of the video on the audio / music and
  send her to the left or right to align on the Audio track. Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete a section...
  Then, insert a Photo and give it the same duration as the segment that you deleted.

  Here's another method:

  Split your video clip on each side of the area where will be the stills. Now... drag
  the part cut on the audio / music. BTW... If you want to add a second 5 again...
  Remove 5 seconds of the video clip. (info below on the separation if you need)

  Drag your pictures still to the time line and drop them to the location where you
  deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to adjust it to
  position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line) to move forward on the scenario.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.