Audio startup option does not.

Similar Questions

• commissioning of startup option does not appear

  my laptop is hp pavilion 14 elegant and I installed ubuntu as second operating system and when he starts the startup option does not appear I hop you can help me solve this problem

  Hi AbdatFaster,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Sleekbook and problems after installing Ubuntu. You could look at this document computer does not start. Here is a link to Faq and Ubuntu.

  I hope this helps.

  Thank you.

• Legacy startup option does not save

  Hi all

  If I want to install windows 7 on my HP ENVY dv6-7258nr, and I've tried both ways.

  One was from a cd that has windows 7 on it, but I get to the final stages and it gives me an error saying that this computer has no hardware to continue or something like that. (NOTE: I have disable securom and active legacy boot from the disc)

  So, that said, I tried to do it via the usb port. Everything works, the installation is subject to the finish and the computer reboots (as it is supposed to be several times throughout the installation process) and my laptop is on the screen where it says "NO operating system installed, etc.". I go into the bios and see that the securom feature has been reactivated and inheritance disabled.

  Now, I just test it to ensure that it is not save. So I turn off the comp, turn it on, go into bios, disable securom and activate, save and exit, restart, go back to the bios and the settings, that I just saved have been returned

  Could this be why the installation of the USB does not work? I think that because of the secruom reset to enabled, its default value of UEFI mode if necessary.

  Any help would be greatly appreciated, thank you.

  Please try update BIOS F.24 from following link:

  http://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60606.exe

  http://FTP.HP.com/pub/SoftPaq/sp60501-61000/sp60606.html

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Desktop icons can be seen on the desktop, folders are not able to be open, content is not visible; File save option does not work!

  Recently, I tried to re - install samsung smarthru mfp program (already installed and working except the scan).

  at the end of the reinstall the Office is empty, desktop wallpaper and all records of icons could not be seen, I wasn't able to use windows Explorer.

  I tried restoring the system, but even after that the message that the restore system was not made completely.

  Now the problems are that (1) folders/icons on the desktop are not displayed on the desktop (I have added Office to taskbar and all office files can be accessed from there.

  (2) the big problem is that folder except option does not work: cannot save Web pages, also the documents/files are not able to be saved after having published a new name.

  (3) new folder names the names of the files are not created.

  I tried norton internet security 2010 full scan, there is no virus.

  kindly help

  Thank you

  Norton will be interefe with system restore.

  Read this info for problems with the system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Launch Startup Repair does not work

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause Launch Startup Repair does not have to work.  Thanks if someone can advise.

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause the launch startup repair does not work.  Thanks if someone can advise.

  Hello

  It may be damaged.

  If you have problems with the use of the built-in repair software:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Computer freezing and startup repair does not solve the problem.

  fix my computer when windows start dump then launch startup, but does not solve the problem. Can you help me solve the problem

  Hi Wwiese,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the problem, the computer freezes in the commissioning on the Windows 7 computer.

  I would appreciate if you can help me with the following information.

  1 were there any hardware or software changes made on the computer before this problem?

  2. are you able to boot into office?

  3. you receive an error message/code?

  I suggest you try these methods and check if it helps.

  Method 1

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download drivers software updated for this particular device.

  Method 2

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 3

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 4

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  In addition, you can do a System Restore the Windows Recovery Console.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Indexing of the options does not not - Dll common shell Windows does not

  Hello

  I can't open the indexing options. It stucks at "awaiting to receive the status of indexing. the error is "Windows Shell common Dll is not responding.
  I tried the fix (support.microsoft.com/mats/windows_search/). And create a new account. And SFC. But nothing does work.
  You have a solution?
  Thank you.

  Hi ATMT

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with indexing options does not and the Windows Shell common Dll message error message does not.

  Method 1:

  I suggest you run the fixit tool and check.

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/en-us

  Method 2:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3:

  I also suggest you to see the links and check.

  You can also check the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

• Why my audio midi Setup does not recognize my external midi devices?

  Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.

  P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.

• 41.0.1 - tab utilities Plugin Options does not work - ranks multiple tabs, etc.

  41.0.1, tab utilities Plugin Options does not work, multiple rows of tabs, etc.

  Installed and configured 'Tab Mix Plus' to use instead of "Tab Utilities".

  Solved. Thank you.

• Firefox Autocorrect option does not

  Hello

  I recently changed my laptop. I installed firefox, but the auto fix option does not work...
  It doesn't show red underscore on the misspelled words...

  However, sometimes it works as well, but most of the time this isn't...

  Also, I've always seen this similar problem: https://support.mozilla.org/en-US/questions/1026848?esab=a & s = & r = 0 & as = s

  Is this due to a bug in the installation or what?
  I would appreciate your help and your support.
  Concerning

  Hello

  You can check your language settings in your Subject: preferences page to make sure you have the correct language configuration. Go to the tab content for languages. You can also make sure that you enable spell checking in the Advanced section, under the general tab.

  • (language) Tools (or

    

    ) > Options > content

  • (check spelling) Tools (or

    

    ) > Options > advanced > General > "Check my spelling as I type".

  Also, check your dictionaries to ensure that you have the right installed:

  • Tools (or

    

    ) > Add-ons > dictionaries

  You can always see if spelling is enabled for the correct language by right clicking in an input box. "Check spelling" must be checked and that there should be a submenu of 'Language' which shows the dictionary that is currently selected.

• Home Page layout option does not work. Home page comes down to Modzilla Firefox Start Page.

  Homepage layout option does not work after saving a new or different homepage on Firefox 19.0. When you open a new page (not tab) it always comes back to the default "Modzilla Firefox Start Page" value anything.

  How to fix preferences that will not save help?

• I have firefox 13 and 15 but realplayer download this video option does not work, extensions to save plugin is disabled, if no videos do not play in youtube

  I have Firefox 13 and real player 15, but the download this video option does not work, under extensions to save browser plugin is disabled, but if active videos do not play in youtube, error occurs, it's major drawback, it works well with IE, but I prefer Firefox so any help to rectify the issue is appreciated.

  One possibility is to upgrade to Flash 11.2 and re - activate the Plugin RealPlayer browser Record extension in the Add-ons Manager (Tools > Modules > Extensions) (it's a softblock).

  If you need to return to 11.2 Flash you can download Player Flash 11.2 through this direct link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

  You must uninstall version 11.3 Flash.

  • http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

• The help file for export bookmarks in Safari told to go to "Organize Favorites", but this option does not appear in my menu

  I want to export Safari bookmarks. The help file explains to pull down the bookmarks menu to 'Organize Favorites', but this option does not appear on my menu drop-down. The help file is out of date?

  Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

• default e-mail account option does not appear

  I have a mini ipad with ios 9.2.1.  I want to choose gmail as my default e-mail account, but the 'default' option does not appear (as it does on my iphone with the same version of ios).  It must be less than the "signature" option in "Mail, Contacts, calendars" in the settings, but it isn't here.  Any suggestion on how to solve this problem?  Thank you.

  You have multiple e-mail accounts set up on your iPad in settings > Mail, Contacts, calendars, and at least two of them were currently "Messaging" enabled on them? I have several active accounts and I had the setting in iOS 9.2.1 (and now 9.3)