Audio video problems

Similar Questions

• Windows Media Player 12 and offset audio/video problem on most video files (.avi, .mkv)

  Hello

  This is the first time that I have a problem playing with windows media player 12.
  2 days I'm having this problem, most of the video files playback (IE great movies) are unstable and the video drags too and is only scratching sound coming from the speaker, while these files work fine on VLC, Real Player and WMC.
  Whatever the source of the files on hard drive or an external source, it just does not play it correctly how which he used to play everything.
  In addition, MP3 and other video files smaller in size are seem to be working on it.
  I would be very happy for your help!
  Concerning

  Hello
  1 did you change on your computer before this problem?
  You can follow the suggestions and then check.

  Method 1
  You can run the troubleshooting of Windows Media Player settings
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2
  You can update the latest codecs and then check.
  NOTE: WARNING OF THIRD PARTY SOFTWARE
  

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. :
  

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

   
  See also:
  Play an audio or video file
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file
  Play an audio or video file: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions
  Tips for fixing in common of the problems of its http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• Audio/video problems in the Timeline

  Now that I'm about to complete the project that I am working, I encountered a problem with getting portions audio and video of all of the assets of my video to come in the calendar when I drag them on my main sequence. I'm not having this problem if I drag the same assets in another sequence in the same project. What I've done!

  Check your Source patch. I suspect that in the sequence where you have problems, you do not have an audio patchwork of the selected track.

  

  [A screenshot would diagnose directly, rather than guess...]

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Satellite L755 - problem Audio/video using the WLAN connection

  Hello

  Recently got a Toshiba L755 and have a problem with the playback audio & video since I got it.
  I've updated the latest drivers for the Conexant HD Audio card and it made no difference.

  Essentially during playback there are a sound intermittent distorted during playback mp3, video playback and online stream.

  I tried different programs and the same thing, however, when I have a LAN cable presents no problem - it's only when I'm connected to the wireless network.
  I have a netgear router which works fine.

  Can someone please tell me what might cause the wireless create this problem and how to fix?

  Thank you very much
  Alex

  Strange you noticed this in battery mode and mode of AC adapter as well?
  Maybe a few Wlan signal interference can cause this

• Error: "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Original title: my sound card is missing or disabled?

  My sound worked very well with some speakers the other day, when suddenly it stopped working. The sounds again, but with sounds such as those where an error message is displayed is not default reading/game audio is not.

  I recently got this computer work again once I've been using another computer for awhile, so I was messing around with some parameters that could be the cause of this.

  One of my games says my sound card's 'missing or disabled', & iTunes says "iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly. »

  Thanks, Toby

  Re-install the drivers audio from the website of the manufacturer of the PC/laptop.

  See you soon,.

  Jerry

• Premiere Pro is mess up my audio/video synchronization. Use Handbrake really the only solution for this problem?

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files). The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." phone I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  Uses 3rd party freeware really the only solution for this problem? Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  Hi Christafarian,

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files).

  You wouldn't be the first. I'm sorry.

  The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." the phone

  I found:

  • If you pull the iPhone in a well-lit environment, it records at a constant speed.
  • In lighting challenged environments, you get images image variable rate.

  I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  For this project, you're probably stuck with transcoding with Handbrake or another method not Adobe. Our coders simply do not handle variable frame rates.

  Uses 3rd party freeware really the only solution for this problem?

  With Premiere Pro and this project, you have no other choice. For future projects, look into purchasing a high end video camera application where you can shoot at a constant rate regardless of the stage lighting.

  Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  If you like Premiere Pro to support variable frame rates, please create a feature request. Otherwise, I hope my tips will help you in the future.

  Thank you
  Kevin

• Video audio sync problems

  Hello
  
  I have a video app that I'm building - and before I used FMS and TCP connections for the video. Now, wait to be much lower than with UDP latency, I implemented in my application and stratus as capable server RTMFP UDP. I used the video phone sample application tutorial a simple sendStream and receiveStream for video.
  
  However, unlike the application hosted itself, example my audio and video are completely out of sync - 4 seconds! I tried to look at the sample code to see if there was any special settings that have been made. I have found none.
  
  My questions:
  
  1 adobe there special settings in their hosted example application? If so, what are they?
  2 are there timing issues known with the help of RTMFP connections for video?
  3. what other also problems of audio video synchronization to face someone?
  4. If none of the above is true, what do you think are my mistakes? Please let me know if I need to add information to answer this question.
  
  Thanks in advance.
  Rohan

  with RTMFP, video and audio can go out of sync if your stream flow exceeds the capacity of your network. video is currently being sent with a reliability of 100%, so once it has queued for transmission, it will be sent (eventually). video is lower priority audio, so audio gets dibs on the capacity of your network. If the video stream flow is higher than what is appropriate for your network (after audio), video data will be back until its send buffer is filled, new images of the camera will stop to have captured him. in steady state, this may look like a multi-seconde shift between video and audio.

  try to lower your rate/quality video so that it fits in your network quality. video and audio should remain synchronized.

  with RTMP, there is a buffer of network transmission (TCP) for all parts of your stream (audio & video). When you have enough bandwidth, the TCP buffer will fill up eventually and video images will stop at been taken into account to compensate. so while the audio and the video might stay synchronized, the total end to end latency will increase. When you use RTMFP, the audio and video have stamps of independent transmission, so in the event of insufficient network resources, audio of the highest priority should be faster but the video can be left behind.

  -mike

• HP Pavilion HauppaugeWinTV HVR 1290 and Windows 7 - Audio stuttering problem

  Hi all

  I have the WinTV HVR 1290 card installed in a new building.  Window7 Media Center does a great job, support the DVR functions.

  I searched for the latest drivers that HP has on Windows7/64 Bit support.  The current problem is that the recovery of a sleep almost always ends with an Audio stuttering problem.  A reboot clears the stuttering.

  HP probably has some drivers of Windows7 pre-release for sold third party hardware integrated into the Media Center PC.

  Any help would be appreciated.

  Thank you

  Roy

  Open Device Manager and look under sound, video and game controllers to see what sound card you have.

  If you have X-Fi Xtreme Audio choose your template from here.

  Scroll down.

  http://support.creative.com/kb/showarticle.aspx?SID=61105

  If you have Realtek use this driver.

  check accept and next. install the updated Vista driver.

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1 & PNid = 14 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

• Satellite R630-13R - HDMI output only for the audio/video receiver?

  I have the opportunity to play the DVD on my Satellite R630-13R with the release of his passing through the stereo jack to my amp, but now that I have to buy a new amp, I've been watching AV receivers that have the HDMI inputs and pass through the image.

  I won't have a TV screen connected for a while (until what it comes to upgrade), but can I enjoy the HDMI sound transformed in the audio/video receiver in the meantime?

  Hey,.

  Yes, you can use the HDMI connection to an AV receiver as HDMI transfer its too.

  I found a thread similar to the receiving subject audio/video HDMI. Maybe it of useful for you also if you have any problems with correct configuration:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50845

  I hope I could help you :)

• Camileo H30 - Audio & video don't work synchronously with Win XP

  My computer is running Windows XP.

  I downloaded DivX 7 as an actor of HD movies.

  But when I download the videos to my computer and you try to play with the DivX 7, the sound is out of sync. But the videos shot in SD play fine.

  Any idea why this might be happening and how to fix?

  I also have the ArcSoft software installed as well.

  Hello

  I have read a lot about these symptoms and it seems that your material is not keeping up with the reading.
  The reason is that the sound plays back well, because its easy for the hardware of computers to do this, but if it is the video, the system is overloaded. The part big percentage of executives "fall": This means that they are not displayed. The frames are correctly displayed are usually late and this causes audio/video synchronization issues. If you have a video problem fell/delayed due to the computers hardware limitation.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Toshiba 40L7335DG: small delay audio/video using the tuner internal

  Sometimes the video audio delay when you use the tv tuner internal.
  The delay is sometimes small and insignificant, sometimes reach approximately 500 ms.

  When some audio or video settings are set to different values to the default values stay worse.

  Other TV (LG) don't have the problem when using the same signal.

  Hello

  Have Hmm you tried to reset the TV to factory default?
  Do this. I read somewhere else that factory settings could help solve such audio problems.

  I had a similar problem with my TV from another manufacturer using a HiFi amplifier as part of s the TV HDMI port.
  But I could solve it an option in the menu of the amp which decreased the output of audio sync problems.

• Satellite C855 - 2fc w / Windows 8 - audio/video trolling and buzzing

  For the past week or so I have experienced a problem audio previously unencountered with my Toshiba Satellite C855 - 2fc (windows 8 OS).

  I had the machine since mid-February, but it was only recently that I found that whenever I try to read multimedia files through any player - mainly Media Player Classic with CCCP codecs, VLC and iTunes, but also when streaming video and audio line - everything I watch/listen to will sometimes meet a hum and that for a brief moment it blocks on a time of audio/video of the same way as shown as in this video:

  http://www.YouTube.com/watch?v=CF9Pvdsz0UM
  (not my video or on the same make of the machine, but the symptoms are exactly the same)

  Although it is extremely annoying this happens particularly often - well that the time is not entirely predictable, I've found that when you listen to a podcast, it would occur about every forty minutes - I'll post again after trying time during video playback.

  Whenever it happened I already had the the Task Manager ready and waiting, but so far I have not noticed any jump in CPU or anything whatsoever on the performance tab or anything that would stand out as being abnormal.

  I'm lost as to what to do about it and what could have caused this--suddenly, it started happening so I thought that there might be a possibility of a windows update or some such thing to happen, but while they inspected my audio driver status in Device Manager I saw that the option to go back to previous versions has been grayed out indicating that they had not been modified since I first used the machine, which means one of the indices only I had as to its possible causes has been removed from the list.

  I spend most of my time watching some stuff on my laptop and it drives me crazy so if you help me to solve this problem, I love you + forever +.

  Hello

  Here are a few comments on the youtube page regarding this video, and some people have already solved this problem. But it wasn't always the same solution.

  A user solved this disk defragmentation HARD running and this contributed to this day

  Others used a software called malwarebites pro.
  It seems that this software one causes some delays during which crisscross the audio.
  You have this software?
  If so, uninstall the pro malwarebites check how it will work.

• Video problems and a green screen

  Hello

  I read the questions and answers on this topic, but some things work and others do not.  For example, I was able to solve one of my problems with some other fixes I found through online forums General for the 'green' screen that plays with the audio only.  It seems to work for me on you tube but not on Facebook more videos alhtough Facebook worked the first time when I rebooted.

  What I did get into my internet options and under accelerated graphics that I checked use software rendering instead of...

  and on the Security tab, I checked activate 64-bit processes in increased protected...  It Enhanced protected mode should as well then?  Should I check this option.

  I also treid to do what the responses recommended... as a right click on the video on Facebook when he plays and then I get a pop up I get the settings options or global settings and adobe flash player info... by clicking on settings gives me options but none for "screen", only for my microphone, camera and storage.  If I click on global settings, need me to flash player help.  And the last option, I get my version of Adobe info, which is version 13.00.214.  So no option to uncheck the box disable accelerated graphics cause I think I already did this in Control Panel.

  But why is working with youtube and videos from Facebook that I also tried to play videos as wmv and other video files files in my windows media player flash and then I get a screen black but still audio not play now.

  My computer is a HP Pavilion Notebook PC and it came with Windows already installed 8.1.  My graphics card is a Radeon R5 AMD graphics card.

  So what the devil now.  Should I install more recent Adode Player?  Even by unchecking the option graphis accelerated, this isn't really a solution for the deeper problem and the question, because then it slows down your graphics card?

  My computer is not even a week and I hate having to always download the patches and constant updates and spend hours searching for and trying to solve a problem that really should not appear in a first time.  Why are there so many problems with Windows?  Is this a problem with windows updates as well.  Active X controls?  Isuses of compatibility with 64-bit processes.  Can I use Firefox.  I did with my old HP, which finally launched the bucket and that's why I had to buy a new one.  I had to replace my battery before a year and my warranty battery lasted that long either and then the thing finally overheated and died.  But I had a lot of similar things happen before with the last HP laptop if it's Windows or is it HP or is it browsers, readers?

  I'm sorry if I'm unloading on you... I want too much, but it's so frustrating as a consumer of always having to go through such things.  I use my laptop to work on his own account so please help!

  Thanks for letting me vent...  I'd appreciate your help, thank you.

  A frustrated customer

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry you're having problems.  I looked into your problem with video problems.

  You have uninstalled Internet Explorer?

  Have you tried Google Chrome?

  It already includes Adobe® Flash® Player built-in. Google Chrome automatically updates when new versions of Flash Player are available. Adobe are on version 15. Here'sa place to update. It has a link to Google Chrome as well.

  Here is a link to common problems of Flashplayer.

  I would try a system restore because this could undo any change that could happen with an update from Microsoft. Sometimes they have not completed or installed on the laptop.

  Hope this helps you.

  Thank you.