RDP to machine with multiple monitors, preserve the application position

Similar Questions

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• 4235 with multiple monitoring Interfaces?

  This is a general question as to whether anyone is running on 4.0 4235 sensor code with multiple monitoring interfaces?

  Basically, I wonder if you have any comments on the performance or if you run into any problems with the configuration. I have not seen too much documentation for configuration in fact this, so I wonder if there are additional requirements or considerations.

  Hi Chad,

  With ID 4.0, you can only montior using an interface to sniff. 4.1 you will have taken care of multiple monitoring interfaces.

  As far as performance goes, I don't see any problems and more to ensure that the management station is able to handle the upcoming alarms when using several interfaces.

  Thank you

  Obaid.

• Audition with multiple monitors and nVidia - crashing / flicker

  When using mulitple monitors hearing signal several times at the start, take longer to start and often crashes.  When you use a single monitor, hearing throw very well.  We run Windows 7 Pro on to Lenovo T430 with nVidia NVS 5400 M card.  I have also some Lenovo x 230 who have Intel Graphics.  When you use multiple monitors with Intel graphics card, it works fine.

  E-mail log files (na not see an option on attach firmly to this topic).  It seems that the main difference is not only with multiple monitors, but rather with nVidia graphics.  Multiple monitors on a laptop computer Intel Graphics ONLY works great... no problems.  Multiple monitors on a computer of graphics from nVidia has problems.  However, when the didn't use a monitor on nVidia computer, it works fine.

• Photos of virtual machines with multiple disks on different LUNS - Question

  I have some questions on how to manage the snapshots of virtual machines with multiple disks on different LUNS.  First of all, the LUNS are VMFS.  We are just starting to add virtual machines with dedicated for data storage format VMFS LUNS.  I don't think an extra space must be made for snapshots, as well as at least 100 GB LUN is required to store the data, and then say, add about 25 to 50% of this amount?  Set the 100 GB vmdk file but have the GB from 25 to 50 additional disk space for snapshots, if necessary (rather than just to get a unit number logic needed 100 GB of data and devote all of the 100 GB to the vmdk file).  In addition, if a virtual machine has several files vmdk on different LUNS, which will be a problem to take a snapshot, and is it possible to do just a snapshot of a disk of a virtual computer (as the volume of the BONE)?

  Thanks for any help.

  Snapshot files are created in the home folder of the VM by default for all virtual disks, no matter on what data store they are. You must make sure you have enough free disk space on the data store for snapshots.

  If you want to exclude a virtual disks of taking snapshots, you can set it to 'Independent' - 'Persistent' machine virtual settings to the HARD drive.

  André

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• share 'Start' content and presentation of the tile with multiple users on the same Tablet Windows RT

  Hello

  Can someone tell me if it is possible to share/copy the content start and the tile layout with multiple users on the same shelf?

  Hello

  Welcome to the Microsoft community.

  Unfortunately, you will not be able to share or copy the content start and available to tile with multiple users. However, you can rearrange the tiles and select the content to be displayed manually on each of the user accounts.

  See these articles for more details:

  Customize the splash screen

  http://Windows.Microsoft.com/en-in/Windows-8/start-screen#1TC=T1

  Reorganization of the tiles start

  http://Windows.Microsoft.com/en-in/Windows-8/rearrange-tiles-start

  I hope this helps. Let us know if you need more assistance.

• Problem of migration of a virtual machine with multiple vCPUs

  When I try to migrate some of our virtual machines with vMotion, I get the following error.

  «Impossible to migrate from host a to host b: virtual machine has 4 virtual CPUs, but the host only supports 1.» The number of virtual processors can be limited by the selected guest OS for the virtual machine or the granting of licenses for the host".

  The two ESX Server are identical HP DL380 with two quad core Intel Xeon. They are both connected to the same server vCenter (2.5). They both use the same license server. And, the VM OS is set to Windows Server 2003 Enterprise (32-bit), which is responsible for 4 vCPUs (it does now after all).

  I tried moved under voltage power VM off and got the same error, so I changed the vCPU to 1 and it migrated correctly. Then, I changed it to 4 vCPUs with no problems on the new host. Only problem is, I can't stop some of the virtual machines to migrate to the new host because of the availability requirements.

  ~ Brian

  Have you tried to change the settings of your license and apply them, just in case where?  I had the weird services fails when there is a kind of latency hit the license of the ESX host server.

  -KjB

  VMware vExpert

• How to avoid creating multiple instances of the application?

  Hello

  We have a user interface Application. The application has been set to Auto run at startup and as a Module system.

  The application has a file listener that checks all new emails.

  When we start the application from the user interface by clicking on the application icon, it seems that the multiple instance of the application is created. For this reason when send us an email to request it is receiving emails several times. Sometimes simple, double and sometimes even five times.

  public class MyApplication  extends UiApplication implements FolderListener,
          SystemListener, GlobalEventListener {
  
      // Boot
      public static void main(String[] args) {
          if (args != null && args.length > 0 && args[0].equals("gui")) {
              // code to initialize the app
              fromService = false;
              // register the notification
              Notification n = new Notification();
              n.registerNotificationObjects();
  
              Utilities.writeLog(GUID, "MyApplication GUI Starting up");
              MyApplication service = new MyApplication();
              service.enterEventDispatcher();
          } else {
              Utilities.writeLog(GUID, "OnBoardV2 Service Starting up");
              MyApplication service = new MyApplication();
              service.enterEventDispatcher();
          }
      }
  
      public void messagesAdded(FolderEvent e) {
          /// Receive messages
          }   
  
  }
  

  In this regard, any help will be apreciated!

  Thank you

  I don't know if it's your entire code, but if you register your application as a file time listener never, it is called, then you save several headphones. The listener does not cause deleted your app closes, you must explicitly remove the listener. You must either put the listener in its own class and only sign up to start or find a way to check if the listener is already registered whenever the application is called.

• Impossible to uncheck "extend the desktop on this monitor option" when you work with multiple monitors.

  Title: Cancellation of the DESKTOP EXTENSION

  I am wanting to "uncheck" the 'extend the desktop to this monitor "... It's 'grey '.  How can I fix?

  Hi Goldie01,

  I understand that you are haivng problem with the connection of multiple monitors. I'll be happy to help you with this problem.
   
  (1) have you tried to connect the monitor directly on the CPU and check?
  (2) have you made changes on the computer before this problem?
   
  Method 1: I suggest you run the Microsoft FIXIT from the link and if it helps.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2: I also suggest you follow the steps to configure and change the display on multiple monitors of links and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors
   
  For reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems
   
  Method 3: Also, I suggest you to update the graphics card drivers and check if it helps.
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• See the virtual machines with multiple tags in a category

  Good afternoon-

  I'm looking for a way to list all virtual computers that have several tags of a certain category. In my situation, I use VMware tags to control the selection of lists for my backup software. I have a category of tag called tags said 'Monday', 'Tuesday', and "Backup Job" etc. I'm looking for a script that will tell me all the virtual machines that have multiple labels in the category of backup, as the 'Monday' and 'Thursday' tags, for example.

  Thank you!

  Try something like this

  $tagCatName = "save jobs".

  $tagCat = get-TagCategory-name $tagCatName

  Get - VM | where {(Get-TagAssignment-entité $_-catégorie $tagCat).} {Count - gt 1} |

  Select Name,

  @{N = 'Tags'; E = {[string]: join ("," (Get-TagAssignment-entity $_-category $tagCat | % {$_.}))} Tag.Name}))}}

• Cycle multiple monitors at the start of the VM?

  I have a virtual machine from Windows XP SP3 running on a 32-bit Windows 7 with 8 monitors host. Whenever I reboot, I have to click the cycle multiple monitors more than a dozen times to get my favorite layout.

  Is there a way to set a value by default so that I don't have to scroll all layouts on each reboot? If not, is there a key combination for the button so that I don't have to follow the menu bar in every sense to continue to click cycle multiple monitors? I have read several posts on the same issue, but have yet to see a solution.

  Here's my svga settings of the. VMX

  SVGA. AutoDetect = "FALSE".
  svga.maxWidth = '6400 '.
  svga.maxHeight = "4800.
  svga.vramSize = "134217728.

  Thanks for all the ideas.

  Unfortunately, no, there no shortcut to move to the N monitors without browsing all possible topologies. We had a few similar requests, and we will look at making it easier to use in a future release.

• IMac is not able to share multimedia files with multiple users on the same computer.

  We just bought a new IMac that we were very excited.  We have phones Apple and iPads, replacement and ten year with a new Mac old PC made since.

  Now, the trouble begins. For more than ten years Windows had several usernames on the same machine and have been able to have a shared folder only for music, pictures and video that my iTunes program and others could acsess and share from several user names. This kept all in one place for new photos families by me or my wife and our 30 gigabytes of music that comes from our CDs was available at bolt of us. Now in train to implement on IMac should be easy but is impossible.  after transferring the music to my login information, it cannot acsess all files on my login. I am not even able to share or provide his acsess. I can move the iTunes folder to my shared folder. She can get acsess now but iTunes says that the library file is locked. I worked with care from Apple on the phone for that sold, but they believe it will not be possible without creating two copies of the 30 gigabytes of music for each of us. who would take more hard drive when it failed too.  Sharing is not any help. These files were before iTunes. I'm not pay 30 dollars a month to store in icloudcor use a google reader slow to the Internet connection when everything's fine here. Apparently Applow programmers do not believe in sharing of multimedia files between two users on the same device, even if a PC does that very well. My choice here is so far have duplicates of all the photos, music and videos loaded on the disc for me and my wife, charge all the media for an external hard drive which for some reason any all Apple programs will share, or return the mac to another PC that will be able to make several connections with sharing music and photos. Apple if you are reading this you are 10 years behind on that. Not everyone is born in the last five years and bought their music on iTunes to be able to use home sharing. Home sharing cannot help this. your applications should be able to be told to use the media files shared without import copies to readers of the user. I am very disappointed. Someone else has any ideas for that?  I have pictures, not iPhoto. I have a week more to be able to return it. I'm not interested in making a fake account that is always connected to share or maintaining of me constantly connected. It should have been easy, I had to be happy to play with new software.

  Photos, iPhoto and iTunes libraries must appear on an external hard drive that is formatted as shown below to be used by multiple users on the same Mac:

  

  So get a properly formatted external HD and move your iPhoto/pictures of her as well as your iTunes library.  This way all your iMac users can access and use both libraries.

  An alternative to the external HD method is to partition your internal hard drive into two partitions, one for libraries.  It is formatted as shown above and be large enough to contain the libraries and allow the expansion of libraries.

  

• Flash with multiple monitors

  Hello
  
  I have a problem with the Flash projector and multiple monitors.
  
  I'm developing an application with the .exe file running on a multiple monitor environment, when I try to get a full screen (with CTRL + F or fscommand ("fullscreen", "true")) display only goes to the main screen.
  
  The only thing that works is to maximize the application but I get the menu and the windows taskbar and the key.
  
  Someone has any idea how to solve this problem?
  
  Thank you in advance.
  
  Javier.

  I think that unless your desktop is set on both monitors and double not only a vision, full screen will always go to just the main monitor. Most graphics cards dual monitor give you the possibility of having dualview, or span.

  Russ

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them