Aurora R4 - adding an SSD with RAID 0 HHDs

Similar Questions

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• SSD with raid H700

  Hi, before you go rip some boxes outside when I get it KingDian 120 GB SSD works with a R610 server with controller of H700?

  Ive read that the raid controller will see disk but will say that the disc is not a dell disk but will work?

  any info on how to get the SSD to work with this raid controller would be nice :)

  They will normally just work, but if you use uncertified readers, all bets are off. You can have particular difficulties with the name/knock-off brands like KingDian. They work either or they do not, there is no much to do if not troubleshooting.

• Adding an SSD on my PC without having to replace the HARD drive

  Greetings!

  I have a HP Pavilion Elite HPE - 180 t desktop PC with Windows 7 64 bit installed.  I do a good amount of games on my PC and a year ago I upgraded my card to an NVIDIA GeForce GTX 470 graphics and my diet to a Thermaltake TR2 RX 750W unit.  I also have a card mother mATX (9.6 "x 9.6") of PEGATRON.

  Recently, I tried adding an SSD for my machine in order to improve the performance and organisation for some PC games that I love.  I did some research on the subject and am found a bit confused on whether or not, my motherboard will be able to handle the addition of an SSD in my machine.  I have read that I need you sure that my motherboard supports natively AHCI?  How can I check to be sure that if I buy an SSD that I'll be able to integrate it into my system?

  To be clear, I want to continue to use my disk regularly to run my operating system and all the other goodies on my PC and install an SSD for store and load my music/movies/games etc.  I was watching some affordable 'mushkin' SSD that seem to do the trick.  I can give the link for more later if necessary.  Thanks for your help!

  Hello

  F10 to the HP splash screen you will get in the bios.

  AHCI is recommended for use with an SSD, but it is not necessary. Most modern SSDS are supported operation garbage collection which does almost the same thing to maintain the SSD.  Check with the manufacturer of your SSD.

  Even if the SATA controller is set to RAID and the SSD doesn't not part of an active array, topping should always work.

• Installation and optimization of Windows 8 with RAID

  Original title: windows installation in dell inspiron 8 5523.

  Hello

  Recently, I bought a dell inspiron with 32 GB ssd and 500 GB of hard drive.

  I try to install fresh windows 8.

  someone please give me step by step of the instructions for installation and optimization with RAID.

  concerning

  Hi Venkatavaradhan,

  1. who is the current operating system installed on the PC?

  2. what exactly happens when you try to install the Windows 8?

  
  Refer to this article on how to install Windows 8.
  How to perform a new installation of Windows
  http://Windows.Microsoft.com/en-CA/Windows-8/clean-install

  To install Windows and optimization with RAID, please post your request in the TechNet forum.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w8itproinstall/threads

  Hope this information helps. If you have other windows related to queries, we will be happy to help you.

• Cable required to replace the 128 GB SSD with a 500 GB Samsung Sata SSD 600 Evo 850?

  Hello

  I have a Tecra Z50-A-169.

  Do I need a different cable to replace the existing Toshiba 128 GB SSD with a 850 Samsung 500 GB sata SSD 600 EVO?

  V/R

  jvdw

  Nevermind, I found it already.
  The current SSD is located in mSATA and I can directly replace it with a Samsung 850 EVO 500 mSATA

  V/R
  jvdw

• XW4400: installation of XP in xw4400 with RAID 1

  Hello

  We are trying to install Windows XP in the workstation HP xw4400 with RAID 1.

  Change the BIOS settings and confgigured RAID.

  But during installation of XP, the Setup program does not recognize the hard drive.

  We are able to install Windows 7, in the same job, with the same RAID configuration.

  Please help.

  Thanks in advance

  You are the very welcome.

  Here is a guide to see how integrate the drivers if you don't know how.  Read the Intel section and then read the downloadable document on how to integrate all drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120/highlight/true#M17758

  I have compressed upwards and attached the applicable drivers below under attachments.

  Download, unzip and wake the folder and it should go.

• Limits of HP Envy Phoenix H9 configuration with Raid drives

  I was about to press the button on Envy H9 with Raid 1 2x2TB readers, but I found that this selection I limited to only 1 optical drive of the selection.  I like the advantage of having 2 optical drives to copy discs, but also like security of the Riad discs in reverse. I contacted HP sales but they could help answer why such a limitation with the Raid configuration. I must point out thatI can select 2 optical drives if I select 2 independent drives. Someone at - it understand why the number of optical discs that me is available depends on if I have 2disk readers in the configuration of the Raid or not?

  Thank you

  Hello

  Intel SATA bios chips and drivers are constantly evolving and any given combination may not work reliably in any given motherboard.

• Slowered Windows experience graphics Index after adding msata SSD on 13 of Yoga

  Windows experience Index graphics and graphics of games lowered after the addition of extra msata SSD on 13 of Yoga. Before the update I added RAM and which increased my experience of them I added msata SSD 256 GB for my Yoga 13 and then my graphics lowered from 5.1 to 4.7 and memory Index and graphics of games reduced from 6.3 to 6.2 and disc main hard went from 7.8 to 7.7.

  I didn't know that adding additional disk msata influence graphics performance. Please let me know if you think anything that might have caused this decline.

  Hi bsreekanthreddy,

  I tried to look and found a few questions on the WEI scores drop after updates to HW,.

  This thread might be useful.

  http://forums.Lenovo.com/T5/Windows-7-knowledge-base/X201-Windows-experience-index-drops-after-upgra...

  http://forums.Lenovo.com/T5/Windows-7-discussion/Wei-score-dropped-after-RAM-upgrade/m-p/382089

  Hope this helps,

  Cheers!

• HP Pavilion Elite HPE-540me: adding an SSD (SATA III) for HP Elite desktop computer. Is this possible?

  Dear Experts...

  I want to upgrade my computer by adding an SSD as a master drive and move the original 2 TB drive to be a slave.

  I found several coices of SSDS, but almost all of them are SATA III interface.

  Is my office supports this interface? as it is just written that it has a SATA interface without specifying what version of SATA!

  How many hard drives could this office holds? I already have two (the original 2 TB and my old drive 256 GB) and I wand to add a SSD for Windows and the progs.

  Can I purchase this SSD for example? Samsung Electronics 840 EVO-series 500 GB 2.5 inch SATA III single-unit Version internal Solid State...

  It is the official my desktop HP specifications page .

  Thanks in advance for your help.

  Hello

  It has 2 bays free HARD disk as on its specifications:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02781215

  You can trade SSDS on your machine and make the old HDD as a secondary drive ("slave"). SATA III is backwards compatible so you can use it. Since then have been smaller SSD (normally 2.5 "), something that is similar to one of the following media:

  http://pccasegear.com/index.php?Main_Page=index&cPath=210_901

  Kind regards.

• When I reply to an Email it seems to be adding other Emails with it.

  As the title suggests. When I reply to an Email it seems to be adding other Emails with it.

  Hello

  Please contact the Microsoft Community Forums. I understand that when you answer email from other email responses will be added.

  (1) who is the provider of mail service?

  (2) using Internet Explorer or another web browser to access your emails and the answer?

  When you reply to an existing message, the content of the email will also get passed.

  If you do not want the content of the email to send when you answer, I suggest you to choose the answer and delete the contents of the email and then compose a new message and send that or you can choose to compose a new message.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• Need advice on setting up my new SSD with a HHD

  I want to transfer my win7 OS and some of my software highly used to my new (500 GB) SSD. My old HHD (500 GB), I like to keep my user files.  When I say userfiles is the designated My Documents, my pictures, my videos, etc.

  I'll use "Acronis True Image" to copy my HHD on my SSD. Then I was going to reformat my HHD call my D: drive and move my Userfiles to this HHD.

  Can someone tell me if this is a good way to put my userfiles on one disc while keeping my OS win7 on my SSD. Should I know, things to watch?

  Thanks in advance.

  I now want to put all userfiles who don't get a lot of use on my E: Can anyone advise how I can do?

  -> Mobile only some of the files is not a good idea. You end up with a confusing system. Much better to move the complete user libraries. You can do it like this:

  1. Make sure you have an external backup of your files to the user. Important always files must be at least two independent media. See here what can happen when you ignore this rule.
  2. Format E: drive.
  3. Create the folder E:\Mettam\Music.
  4. Click the start planet, and then click Mettam to open your libraries.
  5. Right click 'Music', and then click Properties.
  6. Click on 'Move', then enter E:\Mettam\Music as a folder target.
  7. Check if your music files have been moved to the E: drive.
  8. Repeat the process for your remaining files Documents, pictures, videos, downloads. I let the other folders where they are.
  9. Be sure to check your backup process engages the moved files.

     Don't forget to mark answers that will answer your questions as "Response" to this topic.

• The Nikon d5500 has been added is supported with Adobe Lightroom 4.4?

  The Nikon d5500 has been added is supported with Adobe Lightroom 4.4? Thank you.

  No, it isn't. In fact, it is not supported by ANY version of Lightroom at the moment. DNG converter 8.8 supports the model, and you can use it to create DNG copies that can be used in Lightroom 4.4. But the d5500 has been added will never be supported in Lightroom 4.4. Support probably will come in the next update or upgrade.

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about t

  My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about CS6, rebootet and so forth--nothing worked. Two hours later, I tried to install DW 5.5 - that worked. Then I tried again to install 6.0 - without success. Can anyone help?

  Thank you for your response. I could not find caps.db.

  Meanwhile, I solved the problem as follows: I searched "dreamweaver" everywhere one deleted all that I could find. Then I googled "CS6" and did the same. I guess that there are around 20 or more places where I deleted files or directories. Suddenly, installation has not prevented, to 2%, what he has always done before and the installation was a success :-) It cost me more than 4 hours to understand this, and I have found a trick somewhere really help. Adobe itself I could not contact because I couldn't find an email address or a phone number - poor support for such expensive software. For luck, I didn't deliver something just in time. Missing a useful support, it's an attitude really poor, poor Adobe... I think that I do not buy not more products Adobe - it could cost too much of my time... :-(