Limits of HP Envy Phoenix H9 configuration with Raid drives

Similar Questions

• JP Pavilion envy 17 n008nl: problem with a driver

  Hello

  I can't solve a problem with a driver.

  Here is the description:

  \VEN_8086&DEV_095A&SUBSYS_50108086&REV_61\4&3ac2d821&0&00E3

  Should which driver I install?

  Thanks in advance

  Here are the network drivers. Please install the network drivers:

  http://support.HP.com/us-en/document/bph07165

  ALSO

  Try to install HP Support Assistant that will automatically download and install updates/drivers:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

• Phoenix 850qe: HP ENVY Phoenix 850qe Desktop PC - hard drives added additional... power cable?

  Ordered with a SATA PC came with a power cord for this player. want to add my HARD drives... I have slots for three, but a single power cord for the SATA drive...

  Is there a reference number or the name of the adapter to power these discs? (FRO three data cables supplied with unit)

  Its dangerous with sata power thanks to the design of the contacts inside the plug.

  This just sucks, I feel your pain.

• HP ENVY Phoenix Desktop - 850: missing WLAN driver

  Hello

  I can't find the driver for the wireless network adapter.  It is not listed on the page for the driver for my model.

  HW PCI ID: PCI VEN_8086 & DEV_095A & SUBSYS_50108086 & REV_61

  Please answer with driver DL link.

  Thank you

  Dave

  

  

  For anyone interested, the website of intel has a tool, you can download and install to detect missing drivers they know! -A worked for me on the missing drivers!

  http://www.Intel.com/p/en_US/support/detect

• Desktop HP ENVY Phoenix 810qe: desktop HP ENVY Phoenix 810qe

  I wanted to know if
  
  Desktop HP ENVY Phoenix 810qe
  
  Comes with graphical bultin or only the dedicated graphics card?
  Please guide me so that I can make decision of purhcasing this product. Thank you

  Hello

  The link you provided indicates that this particular model has a NVIDIA GTX 745 graphics card included in the price.  This product HP, K6V72AV, also built in the Intel graphics processor, but it is not usable when the NVIDIA GTX 745 is installed.

• Upgrade my HP ENVY Phoenix 810qe desktop computer

  Hi I have a HP ENVY Phoenix computer desktop with Windows 8.1 810qe

  Can I replace my NVIDIA GeForce GTX 745? With the NEW NVIDIA GeForce GTX 970?

  You are welcome.  I am sure that you will be very satisfied.

• HP ENVY Phoenix 810 - 370st: upgrading Ram for my HP ENVY Phoenix 810 - 370st

  I have 16GB in my HP ENVY Phoenix 810 - 370st, with room for another 16.

  I've been looking for affordable options to upgrade, but does not know how much pine should I get?

  It seems that the most common options are 240 and 204... or was a Dyslexic? Is there such a thing as 204?

  I need to know EXACTLY what kind of RAM works for my computer. Thanks to you all.

  Hello

  The modules are 240 pins

  Specifications of the motherboard, IPIWB-PB (Pittsburgh2) | HP® Support
  http://support.HP.com/us-en/product/HP-envy-Phoenix-810-300-desktop-PC-series/7161705/model/7276717/document/c03605561/

  • The four-channel memory architecture

• HP Envy Phoenix h9-1333: upgrade CPU Cooler

  Hi all
  So today, I have a problem that drives me crazy. I have a HP Envy Phoenix h9-1333 with a Core i5 3570 processor, 10GB of RAM DDR3, 2 TB Seagate Barracuda (drive C), 16 GB SanDisk SSD caching, and an Asus GeForce GTX 650Ti upgrade. So I went the process of upgrading my CPU cooler to a cooler much more efficient, quieter, then I jumped on the air cooled by the train running and bought a Cooler Master Hyper 212 Evo. The day before, I moved the components of my Phoenix in a NZXT Phantom 410 Mid Tower case. However when I went to install the stand-offs for the cooler I found that the stand offs were too big for the holes in the motherboard. After you create a scene in front of my dogs full of swearing, I put the old ice on and now makes me here. Yes, the Evo of 212 Hyper will fit in the case, I went up to now this question. My problem is that the stand offs do not fit into the holes and another problem that arises is that there is a back plate which is hard at least to my knowledge but I thought I could work but actually I could not. Is that what I can do so that I can't take back the new cooler?

  Hello

  You must have been struck by lightning the issue with your other post.

  HP generally uses screws to the holes in the motherboard to ensure a fit for the heatsink of HP.  Cooler Master may have some suggestions.

  Saw a post here if someone claims that the back plate can be removed. It still leaves you an adjustment problem. I suggest make you a model of the sink top of page area of editing and send to Cooler Master and ask for advice.  The Cooler Master 212 EVO is an industry best rated air cooler.

• HP Envy Phoenix h9-1355: map graphic upgrade in HP Envy Phoenix h9-1355 [7770 Radeon Radeon R9 series)

  Hello!

  I have a HP Envy Phoenix h9-1355 with graphics of AMD Radeon HD 7770.

  I want to upgrade my graphics card a Radeon HD 7770 to a series of Radeon R9 390 - preference. I want to do this especially because I want to connect multiple computers on struggling Display Port (DP) and my current Radeon HD 7770 card has only one exit of DP.

  I have a few questions:

  1 can I switch to the R9 series and he'll be back in this Office Tower?

  2. is it easy or difficult to unattach the old card and set a new? Requires an expert and if someone competent enough can handle this task?

  Thank you!!

  P.S. is there something else that should I worry about (e.g. from unexpected side effects) to make this update?

  Hello

  I'm confused about your statement to "'connect multiple computers ' to display ports."  Did you mean to say you want to connect several monitors via the ports of the display on your computer?  I think that's what you hear.

  The ASUS TURBO GXE 960 is a nice graphics card. I like the provisioning of multiple DP.  The ASUS card should work in your PC.   If you plan to run a large number of monitors high resolution then you should consider a graphics card that has a larger memory.  The tests that I reviewed during the execution of the 4K displays with modern games isn't all that favorable with mid-range graphics cards.

• Add memory to HP ENVY Phoenix 800 - 070st - free space for the locations of memory behind the radiator.

  Hello

  I ordered a HP ENVY Phoenix 800 - 070st with 16 GB of memory and is to be delivered Friday. My question is how much clearance is here to the sticks of memory in the slots behind the radiator and the radiator has to be removed for adding memory to these two locations. Will it take low memory footprint, or is there room for mem sticks with heat sinks. It won't be here until next week, if just trying to plan ahead.

  Thank you

  Bryan

  Gateb, welcome to the forum.

  I can't find any warnings about any of your concerns in the specs of HP.  However, having said that, I suggest wait you receive the computer to make purchases.  HP isn't necessarily embracing third-party updates.  Memory performance with heat sinks can be very important, as you know, or you have asked the question.  Better safe than sorry.  Just my $. 02.

  Moreover, it is a great computer.

  If your problem is solved, please click "accept as a Solution.

• HP ENVY Phoenix 810-230qe fails intermittently load Win 8.1 at startup

  I've had my HP ENVY Phoenix 810-230qe with Windows Pro 8.1 for a little over a month now.  I love the computer, but I had a problem.  Sometimes at startup, the HP logo will appear on the screen of the monitor and that's where things stop.  Windows 8.1 does not attempt to load.

  The first time this happened, I turned off the computer after a few minutes, then started again, but it's the same thing.  After having thought about it for a few minutes, I turn it off again, then turned on the power and you press ESC several times to get the boot menu appears.  Then I pressed F9 to get to boot device Options. The list of the options I have are:

  • UEFI boot sources

  Windows Boot Manager

  UEFI: IPv4 Realtek PCIe GBE Family Controller

  UEFI: IPv6 Realtek PCIe GBE Family Controller

  • Sources of boot legacy

  In this list, I chose Windows Boot Manager and press ENTER.  The HP logo reappeared and then Windows 8.1 began, to my relief.

  Since then, it happened again a number of other times, but in no set model.  Sometimes it loads Windows without problem, while other times it does not.  I'm now ESC, F9, the Windows boot manager selection quickly when this happens and it loads Windows and all is well.

  Anyone have any ideas on what is the cause or what to do to fix the problem?

  Hello

  Which should not happen with your new PC.

  Shut down the system and check mother HHD or SSD/card power and data connections.

  You can also start to the start menu and run UEFI HDD and component diagnostics.

  Try to reset the BIOS by default. Try a different cable SATA 3.0.

  If you find some mistakes of disc/component and wiring is secure, save all the necessary data and do a factory restore or use Windows Recovery and do a Reset.

  If the problem persists after a restored factory (Reset), then you have a type of hardware problem. Could be the SATA controller on South Bridge or some other motherboard fault. A restore successful factory (the problem disappears) should eliminate all corruption software reserved System / Boot partition.

  You should probably contact HP support for warranty assistance if the problem persists after a factory restore.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Office 810-150se (Win 8.1)
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)

  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)
  Custom build: (Win XP upgraded to Windows 7)

• Difficulty installing ESXi with RAID and Ethernet

  I have a Promise FastTrak TX2300 RAID controller PCI card and a PCI Netgear 1 GB ethernet card. The RAID controller is configured with RAID 1 and has two identical disks connected. A logical drive is defined.

  When I run the VMware ESX Server 3i 3.5.0 installer displays the two RAID drives as if there was no RAID. If I select one of the disks and continue with the installation, the installation program uses only this player and the second drive is intact.

  Once installation is complete, the system will start and allow me to configure the ESX Server.

  The configuration of the server sees any Netgear card.

  How do we install ESXi to recognize the logical RAID drive both the Netgear ethernet adapter? The only Setup installation option that I could see was to press TAB before the loading of the installer. But that just showed two lines of giberish and I press any takes over the responsibility of the installer.

  Kevin

  (1) the promise is a "soft" raid card, which means linux and windows, that the pilot made the raid, ESX, so on, it will work, but each drive is independent.  There is no choice in addition to using a fully supported RAID card.

  (2) netgear probably isn't on the HCL, and therefore will not work.  Buy a card in the HCL...

  -Matt

• HP envy Phoenix: win 7 does not start with connected external hard drive

  I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

  Hello

  The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

  @tpetras

  I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

• Phoenix 810 ENVY: ENVY Phoenix 810 with AMD Radeon R9 270 problem

  System:

  HP ENVY Phoenix PC 810

  Model 810-250se

  10 64-bit Windows

  Video:

  AMD Radeon R9 270

  My PC had a screen black/reboot during the ten days about problem. My son, who plays games on it, believes that the video card above is at the origin of the problem. There was a recent series of Windows included 10 updates a driver for this hardware, but after several attempts (including RESETS of Windows with a picture CD 10) installation via the update or directly from March 28 AMD download, the furthest I get is a black screen after trying to install the driver software. I did it with Windows Defender disabled. I tried Mode safe mode with and without networking, but the Crimson AMD software will not run here. I used the utility from dismantling of AMD as well.

  The problem earlier, before I start all the diagnostics, was a reboot loop.

  Having said all that, at a time given, I ran the HP BIOS utility that scans everything for chess... guess what, video memory FAILED:

  ID 0LM8HS-00082V-QFFV7F-Q2WM03 failure

  Is this an indication that the card is toast, or that the pilot and the chipset is just missing/messed up?

  Another symptom is a weird game of vertical strips on some graphic characteristics.

  So I guess my question is, where I go from here to get the PC up?

  Thank you

  Phil

  Hi @Tutescrew,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the video memory FAILURE. I'll be happy to help you.

  It is a hardware issue, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• HP ENVY Phoenix 860-008na: Prob start with plug headphone

  I ended up buying a new HP ENVY Phoenix 860-008na pc... .set everything works fine... when I stopped him and bk for her to come later everything just do not start I had to unplug the keyboard of my game and my plantronics headset audio 655 DSP... booted up ok taken keyboard in worked fine... but when I plug the headphones in a back of a stop on wouldn't boot again... so had to keep the headset disconnected... can someone tell me wat the prob might be and If I do something? .. .works great on my laptop

  Hi... thx for your answer... I use another headset, plantronics audio 995H wireless and works fine... has them both a few years now... 665 DSP works very well on my laptop wired does not work on the new pc tho