Slowered Windows experience graphics Index after adding msata SSD on 13 of Yoga

Similar Questions

• 2720 XPS does not start after replacing mSATA SSD 32 GB

  Hello

  I replaced the mSATA SSD 32 GB on my 2720 XPS with a Samsung 850 EVO 250 GB SSD.

  When I go into the BIOS, I see the new drive mSATA.

  But when I try to start, I get the error "no boot device."

  I have not changed the settings in my BIOS after permutation of the SSD but I noticed that my first boot device is now internal hard drive instead of Windows boot device, or something in front.

  Any ideas? I tried not to put the 32 GB SSD back in again to see if it boots always.

  Thanks in advance.

  So, I called Microsoft and basically got told that, because I did a clean install on a separate disk that Windows was originally installed, they are unable to help me. I'll have to do a fresh install of Windows 8.1 on my SSD and then upgrade to Windows 10 from there.

  He mentions this particular fact nowhere on their website that provides the media tool!

  And the fact that the Dell rep, I spoke of na not know that particular nugget and asked me to do a clean install on the new disk did not help at all.

  Now I have to wait for Dell to send me a CD of Windows 8 so that I can install on my SSD and update from there.

  Beware if you are already on Windows 10 and planning to install it on a new drive!

• How to re-enable loading the recovery partition after stock mSATA SSD HDD cloning?

  Dear community,

  This weekend I managed to install mSATA 80 GB Intel SSD on my older X 220 of 1 month. With the help of the Intel Data Migration Software my HARD drive 320 GB stock has been cloned on mSATA SSD 80 GB with the downsizing of the system partition main Windows7_OS (66GB instead of 287 GB) and the preservation of the windows loading partition SYSTEM_DRV and ThinkVantage Rescue & Recovery partition Lenovo_Recovery in place. Later, I removed the HARD drive to stay on the SSD system only for testing purposes.

  While Windows loads fine, the BlueButton seems to be a malfunctioning now: instead of loading the partition of ThinkVantage Rescue & recovery it shows me the message of Windows loader telling me that it cannot find the target system more. What's wrong? Is there a way to remedy this?

  NOTE: When I'm pulling HDD inplace and pushing the BlueButton then R & R support very well! It seems that ThinkVantage seeks R & R partition on the disk instead of SSD.

  Thank you!

  OK, answering my own question: Reinstall ThinkVantage Rescue & recovery could help as soon as it re - initializes the boot partition as well.

• Pavilion dv7t-3300: weird behavior after adding the SSD and RAM upgrade

  Has just added a new HD SSD to my note as "disk 1"(the former one is 'disk 0', he has a Win. " 8.1 works). Installed Win. 10 in the new drive and everything has worked well so far. I tried to upgrade the memory, so I bought two Crucial DDR3 1333 with 8 GB memory each, the previos configuration were two 2 GB memory (4 GB total).

  The question is: If you use a single memory (8 GB) everything looks Ok. If I add the other (16 GB total), the new SSD is not recognized, but the old man works as usual. The new drive is not yet recognized after botting from the former (not even from the Disk Manager). Already tried to drag the disks with no luck. There seems to be something with the memory, since everything works with a memory of 8 GB or with two 2 GB memory, but with two memoirs of 8Gb the new SSD seems to be dead

  Advice or similar experiences? Is there something that I am missing?

  So much worse... the SSD seems to be broken or something similar. Does not work on the other PC, then... I guess that this has nothing to do with the memory

  BTW, the 16 GB are works fine

• Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

  I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

  Just reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Remember, if it is a retail upgrade license:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  You can skip to enter the product key and try the activation of the phone to work around this problem.

• Best option to use the mSATA SSD Drive - HP Envy 15 Sleekbook: Cache or primary storage?

  Product: HP Envy 15 t Sleekbook (15 t-j100)

  Technical specification:

  • Intel Core i7-4700MQ @ 2.40 GHz
  • Intel HM87 chipset
  • 12.0 GB RAM DD3 (two openings 8 GB + 4 GB)
  • NVIDIA GeForce GT740M (2 GB) + Intel HD 4600 graphics card
  • 1 TB 5400 RPM SATA HDD
  • Windows 8.1 Pro x 64

  Hi all

  I intend to buy an SSD mSATA disc to my desire, because I want to improve the response time at the opening of some programs, improve the General performance of the operating system and to access files faster to big (read and write).

  I searched several readers mSATA SSD in the Web and I chose a P830 Series128GB mSATA SSD Samsung miniPCI-E disk (SATA III 6 GB/s, read 500 MB/s, writing of 400 MB/s).

  But I'm asking about what might be the best option to use the SSD mSATA so suitable as a primary drive (operating system installation and leaving 1 TB of HARD drive for storage and applications) or use it as a cache to improve overall performance.

  I do not envy for IE play or video editing, but I work with VMWare Workstation, and most of the time I need to use about 2 or 3 VM at the same time (sometimes during the recovery of a virtual Suspension of machine it take a long time, the virtual disks sizes about 40 GB). Another use for my desire is to play movies/series HD / 3D 0 and mirrored them for my Smart TV (via Miracast)

  I read something on Intel Smart Response Technology (SRT) and I heard some benefits for use with SSDS as cache memory but I am still confused the best option.

  Any suggestions you may have? It might be useful for me!

  Kind regards

  Alejandro

  Hello @cchoiz ,

  Welcome to the HP Forums!

  I understand that you have questions about the installation of your mSATA SSD.

  The mSATA slot is designed to only be used as a disk cache. You may experience problems starting in the mSATA SSD as drive. For this reason, I recommend to use it in its configuration provided; as a cache drive.

  The decision is entirely at you in the end. If you are able to configure the BIOS to use the mSATA as the main drive, this will help improve your system performance in addition to using it as a cache drive, especially if there is enough space to install your VMWare on the mSATA SSD after you have installed the operating system. Use it as a main drive will also increase the life expectancy of the SSD.

  I can only offer you my personal and no suggestions 'official response HP' in this regard. As previously mentioned, it is entirely up to you.

  Hopfully, this helps at least a little.

• DV7 Graphics Score on Windows experience index (Radeon 6770 M problem?)

  Can someone explain why the HP dv7t 6000 CTO (prod. No.) XW899AV) displays a score for graphics Windows experience index and the reviews which is higher with the Mobile Intel HD Graphics active (6.3) than with the Radeon HD 6770 M (4.1)?

  I don't know if the cause of updates, but the BIOS and graphics drivers have received updates in the last six months or so... the version of the graphics driver is: 8.830.6.3000and the latest BIOS is installed: F.1A.

  Here are the screenshots of two; each result index performance Windows (WEI) uses a different graphics option:

  Mobile Intel HD Graphics

  

  Radeon HD 6770M

  

  post the solution here:
  
  http://h30434.www3.HP.com/T5/notebook-display-and-video/dv7-with-HD-6770M-2GB-has-horrible-D3D-performance-even-after/TD-p/1007183/page/3

• Base score Windows Experience Index-how to improve Graphics score online?

  Vista Home Premium score is 3.5 because graphic Graphics & Gaming... I don't know how to improve these online & the best score is CPU = 4.9... no idea or help there... thanking you, yours sincerely liam k

  Hello

  Once your graphics hardware has later graphics drivers installed or Web site of the manufacturer of the computer or the manufacturer of the graphics card, that's all.

  The only way to improve the graphical result is to buy and install a better graphics card.

  Don't worry too much about what says the Windows experience index.

  You have no graphic problem?

  Therefore, there is no need to worry about this.

  See you soon.

• issue after deployment to windows 7. I get the error to follow "the Windows experience index.

  Original title: question after deployment to windows 7.

  I just roll back to windows 7 Windows 10

  the best thing I have ever done in my life.

  .

  Now when I try to run the windows experience index
  I get the follow error
  "The Windows experience index.
  your system could not be calculated.
  before, I update to windows 10

  I don't have this problem
  so, how do I solve this problem?

  Hello

  We appreciate your time and effort to get back to us.

  As the step above did not help, I suggest you to try the steps in the link below and check if it helps:

  Performance Windows ERROR index  

  Experience index Windows error "the windows experience index for your system could not be calculated.

  Let us know the status of the issue. We will be more than happy to help you further.

  Thank you and Merry Christmas to you also.

• For XP Windows experience index. I can't find the SYSTEM MAINTENANCE AND after selecting the start and Control Panel.

  I'm following the steps to display the score of our computer trying to open the performance and tools by clicking the Start button, click Control Panel, clicking system and Maintenance , and then clicking Performance Information and Tools. However, I cannot locate the system and Maintenance icon so, therefore, cannot take place.  Maybe this does not apply to our computer?  Yes, we use IE8 and XP Professional.

  Windows XP does not include Windows Experience Index. It is only available in Vista/Win7.

  But there are other tests of performance that allows your computer to reference.

  http://www.CNET.com/topic-software/benchmarking.HTML?tag=Lia; Lcol

  This is a link to several assessment tests. Some are free, others are not.

  Have fun
  DWN2DV8

• experience of Windows error "windows experience index because you couldn't was calculated."

  I take my laptop to cleaning and when I brought I saw the theme is windows based so I ran the windows index and screen pop up experience and he said "windows experience index because you couldn't were calculated.» Cannot not all assessments. Assessments or other operation did not completely succeed. This is because of an error generated by the operating system or other component driver. "Someone knows how to solve?

  so I take my laptop to cleaning and when I got it back I saw the theme is the basis of windows so I ran the windows index and screen pop up experience and he said "windows experience index because you couldn't were calculated.» Cannot not all assessments. Assessments or other operation did not completely succeed. This is because of an error generated by the operating system or other component driver. "Someone knows how to solve?

  Hello

  I'm sorry, but we don't know how they "cleaned".

  But I suggest that you go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  If the problem persists after that, I would take it back to them to fix it properly.

  See you soon.

• Tecra A10-112 - Windows Experience Index 3.4?

  The WEI score is 3.4 with all default settings. The details are the following:

  Processor: 5.4
  Memory: 5.1
  Graphics (office performance): 3.4
  Games graphics: 3.6
  Hard drive: 5.2

  I know that the integrated graphics card isn't help the score in any way. Toshiba A300D-15 b with AMD CPU 2.1 scores 4.8 which has a graphics card dedicated.

  Do not play games, but the disappointing thing is that the performance of office are less than the score of the game.

  Now the question is do I seriously take WEI or the integrated graphics (Intel GMA 4500MHD) is quite good for the time being and for Windows 7?

  Please take into account the fact that A10 - 112 has a resolution of 1680 x 1050 and I think to the graphics card integrated is no match for this resolution in particular with Vista, what you think?

  Hello

  To be honest I think nothing of it. The Windows experience index is ok, but in my opinion it s not really significant.

  But some values are interesting;
  As much as I know graphics performance score Office represents s graphic performance of the system using the Windows Aero Desktop feature. As you've experienced the Aero needs a lot of graphical resources and in my opinion, this value is lower.

  But generally the Mobile Intel GMA 4500MHD isn't bad.
  Graphics memory (performance) can increase the upgrade of the main RAM.
  Thus, for example Vista 32 bit OS:

  RAM 1 GB - dedicated video memory = 64 MB - system memory shared = 158MB - TOTAL graphic memory available = 286MB
  2 GB RAM - dedicated video memory = 128 MB - = 702MB - TOTAL graphic memory available = 830MB shared system memory
  RAM 3 GB - dedicated video memory = 128 MB - = 1214 MB - TOTAL graphic memory available = 1342 MB shared system memory
  4 GB RAM - dedicated video memory = 128 MB - = 1214 MB - TOTAL graphic memory available = 1342 MB shared system memory

  Vista 64-bit OS:
  RAM 1 GB - dedicated video memory = 64 MB - system memory shared = 158MB - TOTAL graphic memory available = 286MB
  2 GB RAM - dedicated video memory = 128 MB - = 702MB - TOTAL graphic memory available = 830MB shared system memory
  RAM 3 GB - dedicated video memory = 128 MB - = 1214 MB - TOTAL graphic memory available = 1342 MB shared system memory
  4 GB RAM - dedicated video memory = 128 MB - = 1631 MB - TOTAL graphic memory available = 1759 MB shared system memory

  Welcome them

• Satellite L655-11J - result of the memory of the Windows experience index

  The results are
  Processor: 6.9
  Memory RAM: 5.9
  Graphics: 6.7
  G game: 6.7
  Hard disk: 5.9 Toshiba mk5059GSXP

  The result of the memory is too low?

  Hey,.

  Why is the result of memory too low? The score is still good scores even other parts are better.

  In addition, the Windows experience index is not important in my opinion. You can see a few numbers at the end, but what to do with it? I don't see a reason to make such a test if I convinced and satisfied with my computer. Who care about these things other landmarks? ;)

• = 1.0 Windows experience index

  My windows experience index is 1.0. It's so disappointing maybe it's because my graphics/video driver? What do you think? I went down my longs E5-411 of win8.1 for 32-bit win7 and it not there no video driver available online.

  

  your problem was caused by the downgrade your system has been designed with windows 8.1, others have tried what you're doing with some success, don't know what driver intel web page you tried, but I think it's called "Iris", but make sure that it is for the 32 bit Windows 7, since that is what you have installed , but again, you have not all controls function that gives windows 8.1 driver, so you may need other drivers from Intel, such that the "chipset" like just install an older version of windows will give you all the necessary drivers for your system default Windows 8.1 has a lot of hardware nerwer drivers in Windows 7 does not have.

  You can try to download driver Intel utility version 2 and running that to see what he can come home with no guarantee that it will work, but just a suggestion that she is a utility designed for updates from the intel driver, another program is called Slimdriver, it will scan your system for the necessary drivers and will locate and download them precision in my experience may be questionable, but it does not work as he says.

• Windows experience index

  Recently I restore my laptop to dell factory image and after that my windows experience index becomes lower. Previously, it is 5 but it's now only 4.3.

  I think that the RAM and the processor side has been reduced.

  Hi Murat,

  Do you have Windows 7 service Pack1 after restoring the computer to the original image?

  If it's just the legacy, then you should not get the low rating for Windows Exp Index.

  I suggest you to see the following link:

  Your computer's Windows Experience Index score may change after you install Windows Vista Service Pack 1
  http://support.Microsoft.com/kb/953286
  
  Method 1: update Windows Experience Index of Control Panel

  To do this, follow these steps:

  (a) click Start.

  (b) right click on computer.

  (c) click on Properties.

  (d) click on Windows Experience Index: not class.

  (e) click Refresh now.

  
  Method 2: Update the Windows performance index at a command prompt

  To do this, follow these steps:

  (a) click Start, type command prompt in the Search box and press ENTER.

  (b) type the following command and press ENTER:

  WinSAT formal

  
  Method 3: After changing the hardware configuration of the computer

  To resolve this problem after you change the hardware configuration of the computer, follow these steps:

  (a) click Start

  (b) type the following path in the Search box, and press ENTER:

  (c) %SYSTEMROOT%\Performance\WinSat\DataStore

  (d) delete all of the .xml files in the folder.

  (e) follow the steps in method 1.

  I suggest update you also the drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly