Aurora-R4, BIOS A05 not found?

Similar Questions

• To version download link Android of the Aurora is offline, page not found

  I am trying to download firefox-aurora to my android, but the file is not available. I get page not found... I couldn't find a place where I could report it correctly, so I post here...

  Thank you, this link should work for now: https://ftp.mozilla.org/pub/mozilla.org/mobile/nightly/latest-mozilla-aurora-android/en-US/fennec-30.0a2.en-US.android-arm.apk

• BIOS directory not found error message - update BIOS T430s

  I recently bought a T430s (Type: 2352CTO) and thought I should try to update the BIOS to version 1.11 to 1.16.

  I have downloaded g1uj07uc.iso and burned the CD in the BIOS. After you restart the computer with the CD, I get an error message:

  The BIOS directory was not found. The process has not completed.

  I also tried the method of flashing the BIOS utility and got the same error.

  Anyone have this problem recently? Any suggestions?

  Year two old messages on other computers suggest that the motherboard must be replaced.

  
  

• Qosmio X 70-A-12 and new BIOS - FILE NOT FOUND

  IFIS would have to download the driver of "nine" BIOS (20/12/2013 - WIN 1.40) I get a 404.

  http://www.Toshiba.at/innovation/download_bios.jsp?service=at

  Thx for fixing this SOON

  Qosmio X 70-A-12

  There must be a temporary technical problem. Check it in a few days. I'm pretty sure Toshiba guys will fix it quickly.

• Updating BIOS for Satellite C55-A-1RG can not be downloaded - 404 not found

  I can't download the update of bios for laptop Satellite C55-A-1RG.
  I go to http://www.toshiba-greece.com/innovation/jsp/supportMyProduct.do?LNG=28&service=SE and when I click on the link

  02/12/14
  Update the BIOS
  Toshiba OS independent 1, 10 - WIN World Wide

  It shows me
  404 not found
  Nginx

  Nobody knows the correct link because I want to install windows 7, only the laptop for one of my clients and with the bios that have the laptop by default some options (start secure-> disable and start-> start MSC mode) and I can't install windows 7.

  If anyone knows of another way to install windows 7, it will be very useful.

  + The message was edited: link has been removed.

  Hello

  It seems that pilots could be downloaded again.

  You should be able to download this BIOS update package:
  [BIOS v1.10-VICTORY for Satellite C50-has, Satellite Pro C50-has, Satellite C55-has | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7936 & selSh ortMod = 4433 & language = 13 & selOS = all & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 1 & ID = 89306 & OS ID =-1 & driverLanguage = 42]

• Update the BIOS of satellite L755-144 - 404 File not found

  From [http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK]
  and [http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp?service=UK]

  11/07/11 BIOS update Toshiba OS independent 2, 70 - WIN World Wide

  [http://support1.toshiba-tro.de/tedd-files2/0/bios-20111107185122.zip]

  results in
  404 File not found

  Post edited by: MarkE

  Thanks for the comments!

• Satellite L455D-S5976 not found so I can't get the BIOS or downloads

  l455d-s5976 is not found on this site, so I can get the bios or downloads.
  I even put in the serial number and which did not either.
  Can not say that fills me full of promise that ill get the help I need.

  I want to update bios in the hope that it will solve my problem.
  My problem is the laptop overheating and closing, according to some investigations it seems that the fan does not pick up speed when it is hot. Fan works, just at lower speeds, strange thing, it seems to run a lot faster when I switch on the laptop and it starts.
  No idea if the bios update can help but its something that I want to try.

  This seems to be US model so try please find it on http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  Good bye

• "Boot device not found" Message After BIOS Update

  Today I was invited by the HP Support Assistant software that a BIOS update was available, so I got the application download and install the update. When the computer is back to the top, it says the boot device is not found.

  Ugh.

  Can someone help me with this?

  I have a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.1. Laptop was working fine before the update, which means that I probably would not have allowed the update of the BIOS.

  I found the problem (for me, anyway).

  1) go into the BIOS (F10 from your black screen) configuration settings.

  (2) fix the "Legacy Boot Options" and save your changes.

  As soon as I did it, it starts immediately in Windows.

• Not found for L50 - B BIOS update

  Hello

  I discovered that there is a new update of the BIOS for my series of satellites L50 - B, but whenever I try to download the file it comes back with a 404 not found. Toshiba pulled the day or something?

  I am running Windows 8.1 64bits.
  Thank you!

  Can you please post part number of your laptop?

  I checked the BIOS download page and he has filed 17 different models (numbers).
  By the way: which version do you want to download?

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cisco ASA 5510 - IOS upgrade 7.0 failing. Not found Flash BIOS

  Hello everyone

  I have a Cisco ASA 5510 in a lab with none of the configurations environment what so ever.

  Objective: upgrade the IOS current version 7.0 (8) to 7.1.1 (possibly go to 8.2 until memory upgrade on the SAA: 256 MB to 1 GB and then move to the latest version of 8.2 IOS).

  Output to see the attached Version.

  Output Flash attached show.

  asa711 - k8.bin is the file that has been copied from a TFTP server to flash.

  The following commands have been executed in order to update the IOS

  ciscoasa (config) # boot flash system: / asa711 - k8.bin
  INFO: Conversion of flash: / asa711 - k8.bin to disk0: / asa711 - k8.bin
  ciscoasa (config) #.
  ciscoasa (config) # end
  ciscoasa # write memory
  Cryptochecksum: aaaa08ce ccde38f2 19c42e08 dea24cbd
  2713 bytes copied in 1,450 dry (2713 bytes/s)
  [OK]
  ciscoasa # reload
  

  PROBLEM: the device ASA goes in an infinite loop (guard restart). This is the message on the console:

  The system boot, please wait...

  CISCO SYSTEMS
  Embedded BIOS Version 1.0 (11) 15:11:51.82 5 08/28/08
  Memory: 631ko
  Memory: 256 MB
  PCI device table.
  Bus Dev Func VendID DevID class Irq
  00 00 00 8086 2578 host Bridge
  00 01 00 8086 2579 PCI to PCI bridge
  00 03 00 8086 PCI bridge to PCI 257 b
  00 1 00 8086 PCI bridge to PCI 25AE
  1 d 00 00 8086 25A 9 Serial Bus 11
  1 00 01 8086 25AA Bus series 10 d
  1 d 00 04 8086 25AB system
  1 d 00 05 8086 25AC IRQ controller
  1 d 00 07 8086 25AD Bus series 9
  1E 00 00 8086 PCI bridge to 244th PCI
  1F 00 00 8086 25A 1 ISA Bridge
  1F 00 02 8086 25 IDE controller has 3 11
  1F 00 03 8086 25A 4 Bus series 5
  1F 00 05 8086 25A 6 Audio 5
  02 01 00 8086 1075 Ethernet 11
  03 01 00 177 D 0003 encrypt/decrypt 9
  03 02 00 8086 1079 Ethernet 9
  03 02 01 8086 1079 Ethernet 9
  03 03 00 8086 1079 Ethernet 9
  03 03 01 8086 1079 Ethernet 9
  04 02 00 8086 1209 Ethernet 11
  04 03 00 8086 1209 Ethernet 5
  Evaluate the BIOS Options...
  Launch of the BIOS Extension installation ROMMON
  Cisco Systems ROMMON Version (1.0 (11) 5) #0: Thu Aug 28 15:23:50 CDT 2008
  Platform ASA5510
  Use BREAK or ESC to interrupt the boot.
  Use the SPACE to start boot immediately.
  Start the program boot...
  Startup configuration file contains 1 entry.

  Load disk0: / asa711 - k8.bin... The starting...

  256 MB OF RAM
  Total of SSMs found: 0
  Total cards network found: 7
  mcwa i82557 Ethernet to irq 11 MAC: 0024.974a.65af
  mcwa i82557 Ethernet to the irq 5 MAC: 0000.0001.0001
  Not found BIOS flash.
  Reset...

  The only way for me to do things to normal is if I BREAK the sequence starting with ESC and go into ROMMON mode. I then issue a start command for the SAA to start with 7.0 (8) default IOS Image.

  Please can someone explain what is the problem here?

  Apologies if I'm missing something obvious that I'm not an expert of the SAA.

  Looks like that the ASA is hitting a field notice: fn62378. The FN, it's because of the incompatible version of hardware and software. Please upgrade to version 7.1.2 instead of 7.1.1. If you plan to spend in 8.2. So instead of going 7.1.2 you could go to 7.2.5 (recommanded), then 8.2.5

  http://www.Cisco.com/c/en/us/support/docs/field-notices/620/fn62378.html

  It will be useful.

  Kind regards

  Akshay Rouanet

  Remember messages useful rate.

• N200 bios flashes-> hard drive not found

  I have a Lenovo 3000 N200 0769.
  I downloaded the upgrade of the bios on the Lenovo site. The laptop stood awake for a few minutes after the launch and completion of lightning with explore does not, including the flash window is complete, normally closed.
  When he started upward again, I got normal screens, finally windows XP startup screen showed, but as soon as the blue line arrived in the second or third place, the computer go to the black screen asking for a normal boot, safe mode or the configuration was last started. All these options have led to a blue error screen that was shown for only a half second that I couldn't even read the error number, then all reeboted again and I got stüch with the display of black selection again.
  When I tried to repair windows XP CD (R key), he said that I have not installed hard drives. I got the same message when I tried to reinstall XP. The bios displays the installed drive. I also tried resetting the bios, no change. I found the article on the community of lenovo on how to reset the cmos, but it seemed that I had failed, either. Anyone alse said his drive Id changed to another thing and causet problem, but does not list how to fix that.
  I don't know what else to do. I need the data on the laptop ASAP and I want to say.

  Someone on FixYa said I need to remove the cmos battery and this is supposed to be under the keyboard. I removed the keyboard, but can't seem to find the battery. Is anyone please tell me where it is? I saw all the batteries in the world and I can not find even when it is... or maybe I have gist never seen one like this yet or what?

  BIG MISTAKE! Version 3.03 of bios is not the best for this model, especially if only a few months (like mine), has made in my case 3.03 caused trouble on the events of interruption-recovery repeatedly crashes on the post. Actually recovered 3.05 bios original and questions solved all this. Later, I will put the download link. You don't need to worry about bsod, simply change the sata to ide on bios mode and windows will go up. (the provided vista can assume the two, xp requires a change of driver before)

• BIOS Flash Utility fails with "BIOS directory is not found."

  I have download the 32-bit BIOS update 6fuj35us.exe and crossed the ThinkPad BIOS Update Utility Setup Wizard. After I click on finish, I accept the option Update my BIOS. He is unable to start the process of flashing with the error popup: 'the BIOS directory is not found. The utility may not be completed. "I tried the image ISO too, it burns and started successfully, but I got the exact same error message when I tried to launch the flash.

  Anyone have this problem?

  Thank you

  I had to send my machine back for a motherboard replacement.  Fortunately, they returned it quickly, two days, as soon as allows shipping.

• Drive 1 not found, cannot enter the bios or boot menu.

  I hope you guys can help me with a problem. I have a workstation t5400. A few days ago it stopped booting. I get a disk 0 not found: Serial ATA, Sata 0. On the bios boot screen, I can hit f2 and it says its set of entry towards the top but just goes back to the drive not found error. I tried to change the cables, tried plugging the drive into another port (which I do not know is actually activated because I can't get on the bios). I know for a fact that the drive works. I replaced the motherboard battery. I wouldn't be able to get into the bios without any installed readers?

  Any help would be a life saver. Thank you

  Morgan.

  Thank you. I unplugged all readers but that did not work at first. It took me ten minutes to realize I should probably remove the battery for a second. I finally had no error! messages and means able to enter setup. All disks have been disabled. That makes sense to me because 0 is enabled by default and it wouldn't give me a not found error if the port has not been activated and that I should still be able to access at least bott settings.

  Anyway, problem solved. Thanks for the help. I still want to know why he messed up.

• Aurora r4 internal hard drive not found

  I went to turn my computer on Thursday and I received a message that says, internal hard disk not found, to solve this problem try to reset the player. No bootable device. Strike F1 to retry boot, F2 to enter setup menu, F5 to enter the PSA.

  I ran PSA and all the past. I removed the internal battery to see if it would help because it worked for me in the past and it didn't this time. I don't have another hard drive.

  I also had to wipe the disk a few months before what is happening. I kept getting blue screens of death, which I thought that it was caused by a virus, the virus has been removed, reset the bios a few months after the virus has been removed I kept getting the blue screen saying that I would need a new motherboard but did not. It worked fine until it starts to me don't give no boot device.

  Any help would be greatly appreciated, I don't want to have to buy a new computer

  Both worse thanks for all the help I got it to someone for repair.