Authentication Server internal
Hello, this my three times I post the same problem on the authentication of the VPN 3000, but so far I didn't return or mail
Maybe the ones I'm more clearly than others.
Go ahead. Go ahead...
I have a VPN with PPTP VPN Tunnel 3000 and is the first option of authentication on the Radius Server:
Configuration > system > server > authentication is first the Radius Server and after internal (internal authentication on the Base Group)
But when I configure a user in User Management > user is not work. I think the order of authentication is first the RADIUS and if it does not find the second option is treated as (this case) is internal to the server. but don't meet the error in the log is:
00:00:08.550 44 04/20/2011-SEV = 3 RPT AUTH/5 = 137 187.55.63.215
00:00:08.550 04/20/2011 46, SEV = 5 PPP/9 RPT = 135 187.55.63.215 How is the behavior of the VPN 3000 when the server (this case a RADIUS) first of all do not be find? the second, that it is processed? I'm doing the second option to treat? I thank. You can lock the user radius to a specific strategy as follows: http://www.Cisco.com/en/us/Tech/tk59/technologies_configuration_example09186a00800946a2.shtml Alternatively, you can also assign the IP address of the radius server, the next option to enable this feature: (select: use the address of the authentication server) Then you need your radius server to assign ip addresses to users. Tags: Cisco Security Need help! ASA 5505 not PPTP passthrough to the Server internal Hello: Recently, I add a new Cisco ASA 5505 like Firewall of the company network. I found that the PPTP authentication has not obtained through internal Microsoft Server. Any help and answer are appriciated. Please see my setup as below. Thank you! ASA Version 8.4 (3)
dhcpd auto_config off vpnclient-wins-override Hello Wayne, The first thing I noticed
In the ACL you are pointing to the broad public while it should be to the private sector (YOU HAVE A PERMIT IP ANY ANY to the end, so it's not bad. FYI, if you decide to take this one any allowed ip address then you should point to private servers ip addresses) Now, the policy where the PPTP inspection, etc., will be used is not applied to any service-policy so add: global service-policy global_policy Don't forget not just for a PPTP connection to get established we should see 2 things: -Trading is done on the TCP 1723 port and then traded on Appreciate data packets. Follow my blog for more information on this topic: http://laguiadelnetworking.com/2012/12/22/what-is-new-on-the-PPTP-inspection-on-the-ASA/ Try and let me know Julio MAB authentication fails on the port of multi-domain: dead result of authentication "server." Hi all First of all, I have no experience with the configuration of Cisco switches (about half a year now) but I read loads and loads of documentation. I am trying to configure several areas (MDA) authentication on our Cisco switches using mab and spin into something strange. Currently, single mab is asked by my employer. Switch = 48-3560G IOS version 12.2 (55) SE1 RADIUS = Freeradius (version 2.1.10) On port Gi0/29 a Cisco 7961 IP phone is connected and plugged into the phone that a laptop is connected The switch configuration: AAA new-model interface GigabitEthernet0/29 dead-criteria 5 tent 5 times RADIUS server Radius response: (for the full reply see attached RADIUS - response.txt) Sending acceptance of access to the port id 98 to 10.1.1.207 1645 That's why access accept with assignment data VLAN Debugging on the switch : 001776: * Mar 1 09:27:35.606: mab-ev(Gi0/29): context MAB received create from AuthMgr
So RADIUS returns an Access_Accept and the switch treats it as a rejection of access and little esteem RADIUS as dead. Help would be appreciated! Chris Hi Chris, In response to your last post, assignment of vlan dynamic could be achieved with the help of the IETF RADIUS attributes according to the link: or using the pair of cisco-av according to the link: As for free using the Radius and cisco-av pairs. Please can you activate debug on switch output and reproduce the problem with the attempt to authentiation of customer: As a result the customer authentication event, also benefit from the following switch: I met problems with respect to the case of the pair of cisco-av. assignment of vlan for example work using the sensitive tiny "tunnel-private-group-id (# 81) = vlanid ' instead of ' tunnel-private-group-ID (# 81) = vlanid. When testing with the 'tunnel-private-group-ID(#81) = vlanid', I get an error: RADIUS/DECODE: parse cisco unknown vsa 'tunnel-private-group-ID' - FAIL So the 2nd link, with the changes: If you still have a question, please include the output of debug/display above which will shed light on the problem. Thank you the external authentication server configuration What is the difference with option 'a' (compared to the 'b' option) what configuration of an external authentication server? a. configuration | System | Servers | Authentication b. configuration | User management | Groups | Authentication servers Is it correct to assume that the 'b' option allows for the configuration of external servers for specific groups? Why should I use option 'a '? Thanks in advance. OK, option b allows you to set a server authentication for a specific group, while option 1 defines a server authentication for all groups. If option b is set then this server is used for authentication to this group only and overrides whatever it is defined in the option. If it is not set, then the option is used. can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message. tried to restart and got the same answer. Just set Windows to update when I logged on tonight. Hi ginnypierson, Thanks for posting in the Microsoft community. I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance. Before you start the troubleshooting steps, I need the information required 1. what web browser do you use? 2. have you made any changes to the computer? 3. this problem occurs only with the particular website? Method 1: If you use Internet explorer, I suggest you to see link and check. Get help with the Web site (HTTP error) error messages. http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors Method 2: I suggest you to see link and check. How to optimize Internet Explorer http://support.Microsoft.com/kb/936213/ro WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved. The authentication server is not available Using Photoshop CS4 Extended on a Windows 7 x 64 platform, when I try to make connections through the window. Extensions | Connections, I get "the authentication server is unavailable." Same thing on my laptop running Windows XP SP3. I have no record of boredom on Adobe.com, so I know that the connection protocols are correct. Also, when I try to "Check For Updates" using the flyout on the table of connections, I get "the update server is unavailable". Naturally, I want to get this working, but I'd settle for a work-around put up a sign that I created in the configurator. Interestingly, when I do window | Extensions | Kuler, I have no problem at all to connect to the Kuler application, so that the rules on internet connectivity to Photoshop questions. We believe that we have identified underlying causes and continue to investigate a long term solution. In the meantime, a workaround described in this article: http://go.Adobe.com/kb/ts_cpsid_83211_en-us Please post on if this solution works for you or not. Matthew PIX 501 problems with the web server internal. I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate. Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security. Then I would like my setup now get help and also how to do when using other ports and SSL later. Thanks Thomas! 6.3 (1) version PIX interface ethernet0 10baset interface ethernet1 100full ethernet0 nameif outside security0 nameif ethernet1 inside the security100 alfta hostname domain ciscopix.com names of name 192.168.1.16 TerminalPC name 192.168.3.0 Lager permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0 permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0 permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager outside_cryptomap_60 ip access list allow 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 outside_access_in tcp allowed access list all eq www host 62.108.197.90 eq www IP outdoor 62.108.197.90 255.255.255.192 IP address inside 192.168.1.254 255.255.255.0 alarm action IP verification of information alarm action attack IP audit location of PDM 62.108.197.10 255.255.255.255 outside location of PDM 62.108.197.11 255.255.255.255 outside location of PDM 192.168.1.0 255.255.255.255 inside location of PDM TerminalPC 255.255.255.255 inside location of PDM 192.168.2.0 255.255.255.0 outside location of PDM Lager 255.255.255.0 outside location of PDM 192.168.2.0 255.255.255.0 inside location of PDM 62.108.197.137 255.255.255.255 outside location of PDM 62.108.197.137 255.255.255.255 inside location of PDM 195.67.210.72 255.255.255.255 outside location of PDM 62.108.197.90 255.255.255.255 inside PDM logging 100 information Global 1 interface (outside) NAT (inside) 0-list of access inside_nat0_outbound NAT (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0 Access-group outside_access_in in interface outside Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1 Enable http server http 62.108.197.10 255.255.255.255 outside http 62.108.197.11 255.255.255.255 outside http 195.67.210.72 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside http 62.108.197.137 255.255.255.255 inside enable floodguard Permitted connection ipsec sysopt Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac Crypto ipsec transform-set esp strong - esp-sha-hmac outside_map 20 ipsec-isakmp crypto map card crypto outside_map 20 match address outside_cryptomap_20 peer set card crypto outside_map 20 195.198.46.88 outside_map card crypto 20 the transform-set ESP-DES-MD5 value outside_map 40 ipsec-isakmp crypto map card crypto outside_map 40 correspondence address outside_cryptomap_40 peer set card crypto outside_map 40 62.108.197.137 outside_map card crypto 40 the transform-set ESP-DES-MD5 value outside_map 60 ipsec-isakmp crypto map card crypto outside_map 60 match address outside_cryptomap_60 peer set card crypto outside_map 60 195.198.46.88 card crypto outside_map 60 the transform-set ESP-DES-MD5 value outside_map interface card crypto outside ISAKMP allows outside ISAKMP key * address 62.108.197.137 netmask 255.255.255.255 ISAKMP key * address 195.198.46.88 netmask 255.255.255.255 part of pre authentication ISAKMP policy 10 encryption of ISAKMP policy 10 ISAKMP policy 10 sha hash 10 1 ISAKMP policy group ISAKMP life duration strategy 10 86400 part of pre authentication ISAKMP policy 20 encryption of ISAKMP policy 20 ISAKMP policy 20 md5 hash 20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400 Telnet 192.168.1.0 255.255.255.255 inside Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www And a new application: outside_access_in list access permit tcp any host 62.108.197.90 eq www Access-group outside_access_in in interface outside * You have the group-access above on your original configuration message, BUT not on the above post. Don't forget to issue clear xlate after the change and also record with write mem. Try to do this in the pix CLI instead of using PDM.
Hope this helps and let me know how you go. Jay I get the following error message when you try to access one of my hotmail accounts:
I get the same message... must be a problem with hotmail. How to view the mail server internal to the secondary address. Peace, I have a wan with 3 addresses interface, and I have an internal e-mail server. When I send emails from the mail server it appears to the world as primary I address we will tell to x.y.z.67. I want it to appear in the secondary address x.y.z.68. How to do this? I already have a nat static port 25 110, 995, and several others, but which allows only when mail is sent to the mail server is not when sending mail from the mail server. any help? I did a quick laboratory with this and then forgot to post back :-) It was on an emulator, but I couldn't make it work. I tried to create a pool NAT using the secondary IP to the e-mail server to use, but it did not work. And there is no way to say IOS you want to overload the mail to a secondary IP address server IP IE. It overloads only on the primary IP on the interface. The only thing I can think right now is a NAT one to one between the real mail IP server and the secondary IP address, but this requires that you do not use the secondary IP address for port redirects to other servers. Is there a reason that it should be a secondary IP address IE. IOS will always be NAT, even if the IP address is not assigned to the interface. Jon Cisco NAC authentication server stopped? Hi all is 1_ there a way to specify an order for authentication on NAC Manager v4.7.2 servers? the needs of the customer, is the primary server (AD) fails it switches to the RADIUS? Is this possible? is 2_ possible for a role on a server auth? Thanks in advance. Dumlu Dumlu, If you configure AD SSO, it is the way it works right now. You need to set the RADIUS or LDAP auth provider, and if so the SSO AD fails, they would see the choice to open a session using this provider. For your question, yes you can map roles to suppliers. When you set a provider, you can provide a default role that uses the provider. HTH, Faisal Deployment via a server internal; stand-alone installers needed Hi all.. I'm new to the creative cloud thing. I'm trying to set up an internal update server so that our users do not have to go to the internet to receive updates CC. I hit a roadblock here, installation/deployment guide: "When you create a product installation folder, one of the first things you do is point AAMEE to product . install file for the product you purchased on or you are product packaging point. The Application Manager of scans this folder and presents you with a list of the applications and components that can be installed, from which you make your choices. » My question: where I can find these? To my knowledge, there is no stand-alone installer for the CC apps. Thank you in advance! Marc Too bad... I realize that JOHN is only for the pre-Creative cloud software. On APEX ai2 Server internal error I get a "500 Internal Server" error today trying to use APEX 5 early adopter preview Is there a planned maintenance of the service? He seemed fine yesterday. I use it to create a basic app demo to try to sell my bosses on the use of the APEX for a next project and I'm supposed to be showing them something today: S Hi André,. We are aware of the problem, which seems to happen intermittently. We will do our best to solve it as soon as possible. We apologize for any inconvenience that this issue is causing. Kind regards Hilary Update of Lightroom 5.7.1 with Server internal to the Adobe update I was able to implement an internal server in my studio to manage all the downloads and a single iMac update and then deploy on others. Because of updates to lightroom via the internal server? Or do I have to install it manually? I tried to download the 5.7.1 Update site and install it on a single machine, but he asks me the serial number. Gianni, We use RUM but pull down updates directly from Adobe. Lightroom is one of the applications that does not affect the Update Manager (like Acrobat, CC Desktop App and, I think, Muse). Our laboratory systems are all built with the installers, created by the Packager CC tool and are anonymous (under license with the tool of serialization and deployed without the desktop application). When the releases a new version of Lightroom, I found that I need to create a new installation package. On Mac OS, it works very well. For Windows, I found that I have to re - serialize the system after installing the update to Lightroom. So, I built this step in the Setup commands script that I use. I hope this helps. I spent the better part of an afternoon to find it the first time that I had to deal with it. Not pulling not updated on the Server internal Flash Hello Two years, I configured an internal server to distribute Flash updated to Windows endpoints. It works well, until he appears, this month of May. My end points are so stuck on 13.0.0.214. If something has changed Check that I did: 1. update script on the server always pulls files. Destination folder indicates v14 has been downloaded Pulling the version.xml from the update server to update internal (via https) confirms this. For info: < version > "' < Plugin major="14"" minor= "0" buildMajor= "0" " buildMinor="145"/ > "" < MacPlugin major= "14" " minor="0" buildMajor="0"" buildMinor= "145"/ > "< SAUConfig checkFrequency="1"/ >" < / version > 2 CNAME 'flashupdate' is always in the DNS system 3 domain wildcard cert is valid and linked to HTTPS such that I get no warning of the cert when you browse the internal update server https://flashupdate.domain.local (IIS 7) On an endpoint, here is a sample flashinstall.log (could not find the error codes mean!) for about the last 30 minutes. I used FlashPlayerUpdateService.exe to start manually. 2014 7-9 + 14-45 - 44.830 [info] 1628 flashupdate.domain.local 2014 7-9 + 14-45 - 44.830 [info] flashupdate.domain.local 1629 2014 7-9 + 14-45 - 44.831 [info] 1614 2014 7-9 + 14-45 - 44.831 [info] 1616 2014 7-9 + 14-45 - 44.832 [info] 1618 2014 7-9 + 14-45 - 44.835 [info] 1608 2014 7-9 + 14-45 - 44.835 [info] 1612 2014 7-9 + 14-45 - 44.837 [info] 1620 2014 7-9 + 15-18-0, 225 [info] 1628 flashupdate.domain.local 2014 7-9 + 15-18-0, 236 [info] 1629 flashupdate.domain.local 2014 7-9 + 15-18-0, 238 [info] 1614 2014 7-9 + 15-18-0, 239 [info] 1615 2014 7-9 + 15-18-0, 240 [info] 1618 2014 7-9 + 15-18-0, 242 1619 1063 [info] 2014 7-9 + 15-18-0, 282 [info] 1628 flashupdate.domain.local 2014 7-9 + 15-18-0, 283 [info] 1629 flashupdate.domain.local 2014 7-9 + 15-18-0, 283 [info] 1614 2014 7-9 + 15-18-0, 284 [info] 1615 2014 7-9 + 15-18-0, 284 [info] 1618 2014 7-9 + 15-18-0, 287 [info] 1608 2014 7-9 + 15-18-0, 288 [info] 1612 2014 7-9 + 15-18-0, 289 [info] 1620 2014 7-9 + 15-18-0, 289 [info] 1604 This is an output of LS endpoint for C:\Windows\SysWOW64\Macromed\Flash showing that nothing moves 43871 total -r - r - r - 1 usergroup 16435888 May 15 12:18 Flash32_13_0_0_214.ocx -rw-rw-rw-1 user group 4609272 9 Jul 16:18 FlashInstall.log Usergroup - rwxrwxrwx 1 1863856 15 May 13:18 FlashPlayerPlugin_13_0_0_214.exe -rwxrwxrwx 1 user group 257712 May 15 13:18 FlashPlayerUpdateService.exe Group of users - rw-rw-rw-1 511152 May 15 12:18 FlashUtil32_13_0_0_214_ActiveX.dll Usergroup - rwxrwxrwx 1 847536 May 15 12:18 FlashUtil32_13_0_0_214_ActiveX.exe Usergroup - rwxrwxrwx 1 847536 15 May 13:18 FlashUtil32_13_0_0_214_Plugin.exe -rw-rw-rw-1 user group 16361136 May 15 13:18 NPSWF32_13_0_0_214.dll Group of users - rw-rw-rw-1 1583299 May 15 12:18 activex.vch Usergroup - rw-rw-rw-1 856 15 May 13:18 flashplayer.xpt -rw-rw-rw-1 user group 0 9 Jul 16:25 ls.txt -rw-rw-rw-1 user group 135 9 Jul 15:52 mms.cfg -rw-rw-rw-1 user group 1598803 May 15 13:18 plugin.vch The mms.cfg looks like: AutoUpdateDisable = 0 SilentAutoUpdateEnable = 1 SilentAutoUpdateServerDomain = flashupdate.domain.local SilentAutoUpdateVerboseLogging = 1 I know that 1. the internal update server is able to communicate with Adobe and download the updates (I used wget in verbose mode to check the result). 2. on the verge of ending, I manually browse and download files update v14 without problem, so config and web hosting permissions looks ok 3. the update of the endpoint for a reason any still refuses to remove the updated files. So, the idea seems to be in the mysterious error codes? So I'm stuck - please help! Hello I'm glad it works for you now. The Setup log file you posted contains any errors, codes just information that indicates the proper functioning of the background update features. To clarify one of your points, the internal update server does not communicate with Adobe servers to download the update package. As an administrator, you or someone else, would need to download the update package (fp_background_update.cab) and send the files (in the structure provided) on your internal server. It is a process unless automate you it. Once the files are displayed on your server, it can take up to an hour for updates start to appear on your machines users (of course, depending on how your environment is configured, you can to clear the cache of your server so that the new files to download). -- Maria of Server internal error 500 everything by opening the page of the Hello World Please check metalink Note: JDeveloper Page errors with 'Cannot find the class Java\Lang\StackOverflowError' [370759.1 ID] Fraud - charged for a purchase unauthorized iTunes/Youtube I got an e-mail, allegedly from Apple (***@contacts.icloud.com), saying that I was charged for an unauthorized purchase iTunes. It's a song unrecognized phone unposted. Delete my purchase the link takes me to Youtube. Can someone advise how I remove I forgot password on Satellite C660 management sister Hey guys,. My sister recently gave me a Toshiba Satellite C660 and she forgot the password for administration.We can go in the other account, but every time I try to download something it requires permissions on the account of administration. Ive bee OfficeJet 8610: 8610 printer does not print just install the new printer. Printer indicates it is connected on the wireless Wireless computer. Printer does not print. Tried to bugs in the HP, installed the full pilot. Nothing happens. Can someone, please? Smartphones blackBerry how to send videos via bbm? is it possible to send videos by blackberry messenger? I continue to read it on the ads but theres no option that allows you too! HELP PLEASE! get the 1726 error: cannot add the port monitor get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525 Could not complete the installation.
Authentication was rejected: reason = authentication failure
manage = 299, Server = (none), user = x 1, area =
User [x 1]
disconnected (MSCHAP VERSION-2) authentication failure...Similar Questions
!
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 172.29.8.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 177.164.222.140 255.255.255.248
!
passive FTP mode
clock timezone GMT 0
DNS server-group DefaultDNS
domain ABCtech.com
permit same-security-traffic inter-interface
network obj_any object
172.29.8.0 subnet 255.255.255.0
service object RDP
source eq 3389 tcp service
Orange network object
Home 172.29.8.151
network of the WAN_173_164_222_138 object
Home 177.164.222.138
SMTP service object
tcp source eq smtp service
service object PPTP
tcp source eq pptp service
service of the JT_WWW object
tcp source eq www service
service of the JT_HTTPS object
tcp source eq https service
network obj_lex object
172.29.88.0 subnet 255.255.255.0
network of offices of Lexington Description
network obj_HQ object
172.29.8.0 subnet 255.255.255.0
guava network object
Home 172.29.8.3
service object L2TP
Service udp source 1701 eq
Standard access list VPN_Tunnel_User allow 172.29.8.0 255.255.255.0
Standard access list VPN_Tunnel_User allow 172.29.88.0 255.255.255.0
inside_access_in list extended access permit icmp any one
inside_access_in tcp extended access list deny any any eq 135
inside_access_in tcp extended access list refuse any eq 135 everything
inside_access_in list extended access deny udp any what eq 135 everything
inside_access_in list extended access deny udp any any eq 135
inside_access_in tcp extended access list deny any any eq 1591
inside_access_in tcp extended access list refuse any eq 1591 everything
inside_access_in list extended access deny udp any eq which 1591 everything
inside_access_in list extended access deny udp any any eq 1591
inside_access_in tcp extended access list deny any any eq 1214
inside_access_in tcp extended access list refuse any eq 1214 all
inside_access_in list extended access deny udp any any eq 1214
inside_access_in list extended access deny udp any what eq 1214 all
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access permit tcp any any eq www
inside_access_in list extended access permit tcp any eq www everything
outside_access_in list extended access permit icmp any one
outside_access_in list extended access permit tcp any host 177.164.222.138 eq 3389
outside_access_in list extended access permit tcp any host 177.164.222.138 eq smtp
outside_access_in list extended access permit tcp any host 177.164.222.138 eq pptp
outside_access_in list extended access permit tcp any host 177.164.222.138 eq www
outside_access_in list extended access permit tcp any host 177.164.222.138 eq https
outside_access_in list extended access allowed grateful if any host 177.164.222.138
outside_access_in list extended access permit udp any host 177.164.222.138 eq 1701
outside_access_in of access allowed any ip an extended list
inside_access_out list extended access permit icmp any one
inside_access_out of access allowed any ip an extended list
access extensive list ip 172.29.8.0 outside_cryptomap allow 255.255.255.0 172.29.88.0 255.255.255.0
inside_in list extended access permit icmp any one
inside_in of access allowed any ip an extended list
inside_in list extended access udp allowed any any eq isakmp
inside_in list extended access udp allowed any isakmp eq everything
inside_in list extended access udp allowed a whole
inside_in list extended access permitted tcp a whole
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
local pool ABC_HQVPN_DHCP 172.29.8.210 - 172.29.8.230 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT static orange interface (inside, outside) source RDP RDP service
NAT (inside, outside) source obj_HQ destination obj_HQ static static obj_lex obj_
Lex-route search
NAT guava Shared source (internal, external) WAN_173_164_222_138 service JT_WWW JT_WWW
NAT guava Shared source (internal, external) WAN_173_164_222_138 service JT_HTTPS JT_HTTPS
NAT guava Shared source (internal, external) WAN_173_164_222_138 service RDP RDP
NAT guava Shared source (internal, external) WAN_173_164_222_138 SMTP SMTP service
NAT guava Shared source (internal, external) WAN_173_164_222_138 PPTP PPTP service
NAT guava Shared source (internal, external) WAN_173_164_222_138 service L2TP L2TP
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
inside_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 177.164.222.142 1
Route inside 172.29.168.0 255.255.255.0 172.29.8.253 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt guava
AAA-server host 172.29.8.3 guava (inside)
Timeout 15
guava auth - NT domain controller
identity of the user by default-domain LOCAL
Enable http server
http 172.29.8.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac Remote_VPN_Set ikev1
Crypto ipsec transform-set esp-3des esp-md5-hmac Remote_vpn_set ikev1
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto-map Dynamics 20 ikev1 transform-set Remote_VPN_Set set outside_dyn_map
Crypto-map dynamic outside_dyn_map 20 the value reverse-road
card crypto outside_map 1 match address outside_cryptomap
peer set card crypto outside_map 1 173.190.123.138
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5
ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA'RE
P-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 192.168.1.0 255.255.255.0 inside
Telnet 172.29.8.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
!
dhcprelay Server 172.29.8.3 on the inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
internal ABCtech_VPN group strategy
attributes of Group Policy ABCtech_VPN
value of server DNS 172.29.8.3
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_Tunnel_User
value by default-field ABCtech.local
internal GroupPolicy_10.8.8.1 group strategy
attributes of Group Policy GroupPolicy_10.8.8.1
VPN-tunnel-Protocol ikev1, ikev2
name of user who encrypted password eicyrfJBrqOaxQvS
tunnel-group 10.8.8.1 type ipsec-l2l
tunnel-group 10.8.8.1 General-attributes
Group - default policy - GroupPolicy_10.8.8.1
IPSec-attributes tunnel-group 10.8.8.1
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
remotely IKEv2 authentication certificate
pre-shared-key authentication local IKEv2 *.
tunnel-group ABCtech type remote access
attributes global-tunnel-group ABCtech
address ABC_HQVPN_DHCP pool
authentication-server-group guava
Group Policy - by default-ABCtech_VPN
IPSec-attributes tunnel-group ABCtech
IKEv1 pre-shared-key *.
tunnel-group 173.190.123.138 type ipsec-l2l
tunnel-group 173.190.123.138 General-attributes
Group - default policy - GroupPolicy_10.8.8.1
IPSec-attributes tunnel-group 173.190.123.138
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
remotely IKEv2 authentication certificate
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
Policy-map global_policy
class inspection_default
inspect the pptp
inspect the ftp
inspect the netbios
!
172.29.8.3 SMTP server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:6a26676668b742900360f924b4bc80de
: end
!
Group AAA dot1x default authentication RADIUS
Group AAA authorization network default RADIUS
AAA accounting delay start
start-stop radius group AAA accounting dot1x default
start-stop radius group AAA accounting network default
!
235 a description
switchport access vlan 4
switchport mode access
switchport voice vlan 2
load-interval 30
bandwidth share SRR-queue 10 10 60 20
queue-series 2
priority queue
action retry authentication event 0 failure allow vlan 7
action of death event authentication server allow vlan 4
living action of the server reset the authentication event
multi-domain of host-mode authentication
Auto control of the port of authentication
restrict the authentication violation
MAB
Auto qos voip cisco-phone
spanning tree portfast
service-policy input AutoQoS-Police-CiscoPhone
!
RADIUS-server host 10.1.1.24 auth-port 1812 acct-port 1813
RADIUS server key 7 xxx
RADIUS vsa server send accounting
RADIUS vsa server send authentication
Cisco-AVPair = "Tunnel-Type = VLAN.
Cisco-AVPair = "Tunnel-Medium-Type = 802.
Cisco-AVPair = "Tunnel-private-Group-ID = 7.
Cisco-AVPair = "Tunnel-preference.
001777: * Mar 1 09:27:35.606: mab-ev(Gi0/29): MAB authorizing MACAddress
001778: * Mar 1 09:27:35.606: mab-ev(Gi0/29): client context created MAB 0x2200000F
001779: * 09:27:35.606 Mar 1: mab: State has original mab_initialize enter
001780: * Mar 1 09:27:35.606: mab-ev(Gi0/29): sent to create a new context of EAP of MAB to 0x2200000F (MACAddress) event
001781: * Mar 1 10:27:35.606 THIS: % AUTHMGR-5-START: start "mab" for the customer (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
001782: * Mar 1 09:27:35.606: mab-sm(Gi0/29): the event received 'MAB_CONTINUE' on the 0x2200000F handle
001783: * 09:27:35.606 Mar 1: mab: during the mab_initialize State, had 1 (mabContinue) event
001784: * 09:27:35.606 Mar 1: @ mab: mab_initialize-> mab_authorizing
001785: * Mar 1 09:27:35.606: mab-ev(Gi0/29): MAC-AUTH-BYPASS boot for 0x2200000F (MACAddress)
001786: * Mar 1 09:27:35.614: mab-ev(Gi0/29): MAB received a Reject Access for 0x2200000F (MACAddress)
001787: * Mar 1 10:27:35.622 THIS: % MAB-5-FAIL: failure of authentication for the client (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
001788: * Mar 1 09:27:35.622: mab-sm(Gi0/29): the event received 'MAB_RESULT' on the 0x2200000F handle
001789: * 09:27:35.622 Mar 1: mab: during the mab_authorizing State, had 5 (mabResult) event
001790: * 09:27:35.622 Mar 1: @ mab: mab_authorizing-> mab_terminate
001791: * Mar 1 09:27:35.622: mab-ev(Gi0/29): removed the credentials of 0x2200000F (dot1x_mac_auth_MACAddress) profile
001792: * Mar 1 09:27:35.622: mab-ev(Gi0/29): AuthMGR for MACAddress sending event (2)
001793: * Mar 1 10:27:35.622 THIS: % AUTHMGR-7-RESULT: result "dead server" authentication "mab" for the customer (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
001794: * Mar 1 10:27:35.622 THIS: % AUTHMGR-5-VLANASSIGN: VLAN 4 assigned to Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
001795: * Mar 1 10:27:36.512 THIS: % AUTHMGR-5-SUCCESS: authorization succeeded for client (MACAddress) on the Interface Gi0/29 AuditSessionID 0A0101CF0000007F0207A4AC
http://Tools.Cisco.com/Squish/d1791
http://Tools.Cisco.com/Squish/8Bd61
Debug RADIUS
Debug authentication of all the
debug functionality of authentication all
display the interface authentication sessions
Cisco-avpair = "tunnel-type(#64) = VLAN (13).
Cisco-avpair = "tunnel-medium-type(#65) = 802 media (6).
Cisco-avpair = "tunnel-private-group-id(#81) = vlanid.
Alex
Everything works well except for Lightroom, which I can't see the updates. I am still with version 5.6, because it seems that the internal server downloads updates of lightroom (so I don't get notification of update of the iMac to customer).
I learn OAF and I run the "HomePG.xml", but I get a page saying "Page cannot be displayed" with 500 internal server error.
Can someone help me please? Maybe you are looking for