Authentication timeout

Similar Questions

• Newbie Pix 501 HTTP authentication timeout

  two issues here:

  1. users that connect to the Internet through the Pix 501 ask about every three minutes to enter their user name and password. There must be a setting to change this, my dealer said there is no.

  2. users that connect to the Internet, the first time have their IE session. By clicking Stop and then refresh or House brings to the top of the page. Any ideas.

  Thanks in advance for any ideas you may have

  Jeff Charland

  Jeff,

  First rule is to never trust your seller on technical issues;). Your dealer is wrong. You can indeed change the moment where a user is re - you are prompted to enter their credentials. There are basically 2 parameters, you need to know about the pix regarding delays of authentication:

  (1) the inactivity timer. It's just like that. It expires an authenticated session via the PIX to hit X amount of time without all the traffic. The default timer on the PIX for this setting is 0, which means that we are no period of inactivity by the user (by default) monitor.

  (2) the absoltue timer. Again, is to noise. This timer starts as soon as the user is authenticated and works continuously. When the time is reached, the user is obliged to to re-authenticate when they try to start a new connection (for example, by clicking a link in a web page). The default setting for the absolute timer is 5 minutes.

  We recommend that you do not keep an absolute clock set for security purposes, but for ease of access, you can change these settings. Something like that would not be a 'off the wall' setting:

  timeout uauth 01:00 absolute uauth 0: idle from 10:00

  These settings will force the user to to re-authenticate every hour (absolute) or every 10 minutes after the connection becomes inactive.

  And finally, no idea about #2 above. It happens with all users. Anyone who has tried to Netscape to see if it is a question only IE?

  Scott

• SSH problem - unexpected Type of Message

  Hello

  I got this error message when I try to connect to my router (Version 12.2 (17r) S4). I refreshed instead of 1024 2048 bit RSA keys, but the message remains displayed.

  5 15:59:19.345 it IS: SSH2 0: type received unexpected mesg

  5 15:57:26.372 it IS: SSH2 0: type received unexpected mesg

  XXXX.xxxx #SH ip ssh

  Active SSH - version 1.99

  Authentication timeout: 120 seconds. New authentication attempts: 3

  XXXX.xxxx ssh #SH

  % No SSHv1 connections to the server running.

  % No SSHv2 server running connections

  Can someone help me?

  Thank you

  Hello

  Try to specify version 1 on the command line:

  -for IOS cli

  SSH - v 1 IP ADDRESS

  -for openssh

  SSH-1 IP ADDRESS

  Kind regards

• DHCP client when the auth-fail dot1x vlan not asking not

  Switching VLAN works very well when the user is authenticated. The machine is on vlan X, the user connects, port goes to vlan and then receives an ip address of the vlan Y. When the user disconnects, machine reauths and dates back to the vlan X.

  However, when I use the LAN virtual auth failure of dot1x on the port, the switch will change to vlan Z, but the computer (XP) still has an ip address of the vlan x XP still shows as "trying to authenticate" which I suppose may be the problem with her not asking not DHCP (normally it only until after auth).

  Is there an authentication timeout setting somewhere in XP? Or y at - it another way this problem? It's XP with SP3.

  Is there not another way around the issue. The 'problem' is that the machine already has an IP address.

  Basically, Auth-Fail-VLAN works as if a network connected to a switch, watched x-number of chess administrator happening consecutively, and the admin allows the port anyway in mode authorized strength and hard-sets it in one VLAN specific. At this point, it's the supplicant on how / if she needs to get on the network.

  IOW, it's a bit as if you just change the VLAN on a port on the fly for any other reason... same question.

  One workaround might be of course ensure it fails at time of initial plugin, when machine requests an IP address at first (assuming only for Windows platform anyway).

  Hope this helps,

• ASA and Phonefactor

  I'll try to get my ASA to authenticate users Anyconnect with Phonefactor authentication. Has anyone successfully done this before?

  Hi Jason,

  For that to work, you must configure the ASA to send a RADIUS request to PhoneFactor, you must set the timeout of RADIUS there so so that the ASA is not downtime waiting for a response from PhoneFactor.  Thus, both the ASA and the AnyConnect client must have enough downtime for the call that will take place and get an answer.

  By default, AnyConnect expects up to 12 seconds for authentication of the SAA before terminating the connection attempt. You can change this value in the XML profile as follows:

  To set the time of 90 seconds authentication:

  
  

  90
  

  You can see the release notes that describes the 'authentication Timeout control' to:

  Control of authentication Timeout

  The rest of the configuration is a client AnyConnect fairly common authentication with a Radius server.

  Let me know if you have any questions.

  Portu.

  Please note all useful posts

• SSH...

  Hello

  I activated the ssh ver 1 to my router, and when I run the command "sh ip ssh" is the result:

  Active SSH - version 1.5

  Authentication timeout: 20 seconds; New authentication attempts: 5

  I now use "putty" to access the router. His request to connect as and password. My understanding is that password is the one I've settled on vty lines, is not? What should I use in the connection like? If anyone can help please? Thank you.

  You have configured the following on your VTY lines: input ssh transport

  You can also check your config with the example here: http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

  I hope this helps.

  Steve

• Help command VIHostUpdate

  I hope that someone will know the syntax of the command that I need.

  I'm trying ugrade 4.0U1 4.1, I know that all the vihostupdate stuff and have used it before.

  My problem is that for some reason, my ESXi4.0U1 is very slow in transferring the zip of upgrading my client computer to the ESXi host, so I have an authentication timeout (takes more and download time), so I get a SOAP fault and vihostupdate stops

  Research in the ESXi host working folder shows a complete the upgrade zip copy, if I run the vihostupdate it just deletes and restarts the transfer of files, then mistakes once again.

  so my question, is there a command that will use the upgrade on the ESXi host zip to complete the upgrade process

  Thank you

  Wayne

  You can use the Technical Support or SSH to access the command-line ESXi host.

  Using esxupdate

  esxupdate--bundle=/path/to/bundle.zip scanning

  All mistakes here probably indicate the lack of a place to scratch. Defined by the client to Configuration tab-online software-online advanced settings.)

  Make sure you are in Maintenance mode and run

  esxupdate--bundle=/path/to/bundle.zip update

• wireless authentication failed because of timeout on new router

  Wi Fi nightmare!

  We bought a new router as we couldn't find MSI we bought the ASUS!

  ASUS WL-520GC router =>

  Wireless authentication failed because the timeout. Layer 2 security key exchange did not generate multicast keys before timeout. I have a Windows vista with the latest Service Pack installed on an Aspire 7520-5115. What I'm doing wrong (I'm a semi ILLITERATE computer!)?

  We bought a new router as we couldn't find MSI we bought the ASUS!

  ASUS WL-520GC router =>

  Wireless authentication failed because the timeout. Layer 2 security key exchange did not generate multicast keys before timeout. I have a Windows vista with the latest Service Pack installed on an Aspire 7520-5115. What I'm doing wrong (I'm a semi ILLITERATE computer!)?

  Help you contact your ISP or ASUS. This isn't a problem of Microsoft.

• Dot1x question: authentication MAB will never be failure or timeout

  Hello

  I have a problem when the switch will try to authenticate a device with MAB and it will never, or timeout.

  Here's the situation: where a device has 802 authentication. 1 x active but not a invalid parameters (or missing certificate).

  The switch will start dot1x for the customer and it will not be (a). He will switch to dot1x to MAB and... silence.

  I use a WS-C2960-24LT-L with IOS 15.0 (2) SE.

  Config:

   interface FastEthernet0/16 switchport access vlan 155 switchport mode access authentication event fail action authorize vlan 550 authentication event server dead action authorize vlan 550 authentication event no-response action authorize vlan 550 authentication port-control auto mab dot1x pae authenticator dot1x timeout quiet-period 3 dot1x timeout tx-period 1 spanning-tree portfast spanning-tree bpduguard enable end

  Newspapers:

   Dec 4 17:34:51.064 GMT: %LINK-3-UPDOWN: Interface FastEthernet0/16, changed state to up Dec 4 17:34:51.147 GMT: %AUTHMGR-5-START: Starting 'dot1x' for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:52.070 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/16, changed state to up Dec 4 17:34:54.234 GMT: %DOT1X-5-FAIL: Authentication failed for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:54.234 GMT: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:57.321 GMT: %DOT1X-5-FAIL: Authentication failed for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:34:57.321 GMT: %AUTHMGR-7-RESULT: Authentication result 'timeout' from 'dot1x' for client (e89a.8fb0.67c3) on Interface Fa0/16 AuditSessionID 0A011246000001187AA1F62B Dec 4 17:35:00.601 GMT: %DOT1X-5-FAIL: Authentication failed for client (Unknown MAC) on Interface Fa0/16 AuditSessionID 0A011246000001197AA21094 Dec 4 17:35:00.601 GMT: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (Unknown MAC) on Interface Fa0/16 AuditSessionID 0A011246000001197AA21094 Dec 4 17:35:00.601 GMT: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (Unknown MAC) on Interface Fa0/16 AuditSessionID 0A011246000001197AA21094

  SH int fa0/16 session auth

   Interface: FastEthernet0/16 MAC Address: Unknown IP Address: Unknown Status: Running Domain: UNKNOWN Oper host mode: single-host Oper control dir: both Session timeout: N/A Idle timeout: N/A Common Session ID: 0A011246000001197AA21094 Acct Session ID: 0x00000380 Handle: 0x1700011A Runnable methods list: Method State dot1x Failed over mab Running

  You can see above that is still running MAB but this device is not listed on the local store ID sequence or any where. If I run the command 'No mab', the switch will respond will be unavailable methods more and nothing more.

   Interface MAC Address Method Domain Status Session ID Fa0/16 (unknown) N/A UNKNOWN No Methods 0A011246000001197AA21094

  However, when I remove the command MAB; reset the port; He eventually fail to dot1x and move to restricted VLAN.

  It is this value by default design or the drop between the switch and the ACS authentication? Should I just use MAB where it is needed?

  Thank you in advance.

  On your configuration of the interface, I normally expect to see flex active thus auth:

   authentication priority dot1x mab authentication order dot1x mab authentication event fail action next-method

• Authentication of GBA / list DACL Timeout

  Hi all

  We have an installation of the SAA program to authenticate users who connect in the DMZ by RADIUS (ACS) and if it is allowed, download an ACL of GBA.

  Users are to expire after 15 minutes and have to be re - authenticate.  I guess it's a timeout value.

  How can I increase this value of timeout on GBA?

  Thank you!

  If you do not order that the SAA, you will need to adjust this setting:

  VPN-session-timeout

  If you want to control this GBA you can change/return the following attributes in the "authorization profile.

  Attribute RADIUS 50 - CVPN3000/ASA/PIX7.x-Authd-User-Idle-Timeout

  Located under the "Radius attributes: TAB.

  Reauthentication timer: Value  

  Located under the tab "common tasks".

  This requires that you run ACS 5.x.

  Thank you for evaluating useful messages!

• Machine + user authentication / MAR / Timeout

  Hello

  I use ISE 1.1.3.124.

  My first question:
  I want to know the relationship between the attribute 'WasMachineAuthenticated '.
  and MAR (restricted access MAchine in advanced for AD setting).
  Is it the same or not?

  When you exhale, you must machine auth again. What is the timer?
  Using the "WasMachineAuthenticated" attribute, is this the same timer that you configure in MAR?

  My second question:
  In a distributed environment, is the information on the previously authenticated machine replicated on all nodes in strategy?
  Because, if a swicth has 2 RADIUS-server, we are not sure that he shows up every time on the same server.

  Michel Misonne

  Hello

  Yes the attribute you a SEO are related to MAR settings which you pointed out.

  The cache of MAR is not replicated, and I don't know if this is roadmapped because the supplicant Anyconnect NAM now supports EAP-chaining.

  Here is more information on this feature:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect31/release/notes/anyconnect31rn.html#wp43883

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• The OAuth authentication. Timeout token

  Hello

  Documentation, I see that the time of expiration of the tokens are

  • Authorization codes expires in 60 seconds (for immediate use)
  • Access token expires in 8 hours
  • Refresh tokens expires in 1 year

  What will be the response of import or export if the access token is no longer valid? Is it possible to determine at service access token is expired?

  Hi Gregory,.

  You will receive a 401 response code trying to authenticate with the Eloqua API with credentials not valid/expired.

  In addition, when using OAuth authentication you can do a few checks in advance;

  -Store the value "expires in ' next to the chips so you know when to recharge them them.

  -Intermittently call endpoint API (https://login.eloqua.com/id) and drop/update tokens according to the answer.

  Let me know if you have any other questions.

• PPP CHAP counterpart x 3000-authentication failed

  Hello

  I just bought Linksys x 3000 a few days for my DSL to Jakarta.

  After that I configured my 3000 x, the internet connection could not go up if the PVC connection is in place.

  Here is some information of the device:

  Router information
  Firmware version: v1.0.01 build 2 November 00 22,2011
  Checking the firmware: 914eee0ceca371b4a4231c2af2f9f47f
  Current time: not available
  MAC address: 98:fc:11:dd:0e:cd
  Name of the router: linksys
  Host name:
  Domain name: telkom.net

  Internet connection
  Type of connection: RFC 2516 PPPoE
  Online status: offline
  Internet IP address: 0.0.0.0
  Subnet mask: 0.0.0.0
  Default gateway: 0.0.0.0
  DNS 1: 0.0.0.0
  DNS 2: 0.0.0.0
  DNS 3: 0.0.0.0
  MTU: 0

  DSL connection:
  Status: to the top
  Download speed: 1215 Kbps
  Upstream speed: 442 Kbps

  Connection of PVC
  Encapsulation: RFC 2516 PPPoE
  Multiplexing: LLC
  Type of QoS: UBR
  PCR:
  SCR:
  Automatic detection: disable
  VPI: 0
  VCI: 35
  Activated: Yes
  PVC status: to the top

  And here's what I got in the system log:

  PPP pilot generic version 2.4.2 79
  Deflate Compression of PPP module part 88
  PPP BSD Compression module part 84
  PPPoL2TP kernel driver, 75 V1.0
  ccp_autowan_sm_thread => starts in unconfigured mode, detection of State! 125
  -> State disconnected! 78
  xDSL G.994 training 74
  -> detection of State! 75
  -> dslWanSt = 1, ethWanSt = 0 81
  -> Training RJ11 condition! 79
  ADSL G.992 started 73
  Analysis of channel ADSL G.992 82
  ADSL G.992 82 message exchange
  Link up, carrier 0 ADSL, = us 442, ds = 1215 94
  -> RJ11 State! 70
  PPP-online Start connect... 78
  PPPoE PADI sending. 69
  PPPoE received PADO. 70
  PPPoE sending PADR. 69
  PPPoE server detected. 72
  PPPoE received PADS, session PPP set up. 95
  PPP sends ConfReq id = 0 x 1 [0xb65fbae2 magic] 91
  PPP receive ConfAck id = 0 x 1 [0xb65fbae2 magic] 94
  PPP receive ConfReq id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xc118f417 magic] 121
  PPP sends ConfAck id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xc118f417 magic] 118
  PPP LCP UPWARD. 61
  PPP receive challenge id = 0 x 1, <2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x>, name = 127 Huawei
  PPP receive failure id = 0 1 76 x
  PPP CHAP 84 peer authentication failed
  PPP LCP DOWN. 63
  PPP sends TermReq id = 0 x 2 could not authenticate ourselves Exchange 113
  PPP (LCP) send reason Terminate-Request Failed to authenticate ourselves pair. 131
  PPP User name and password authentication failed. 98
  PPP receive id = 0 3 75 x TermReq
  PPP sends TermAck id = 0 3 72 x
  PPP sends TermReq id = 0 x 3 could not authenticate ourselves Exchange 113
  PPP (LCP) send Terminate-Request reason FM timeout. 101
  PPPoE sent PADT. 69
  PPP-online Start connect... 78
  PPPoE PADI sending. 69
  PPPoE received PADT, meeting took end. 94
  PPPoE received PADO. 70
  PPPoE sending PADR. 69
  PPPoE server detected. 72
  PPPoE received PADS, session PPP set up. 95
  PPP sends ConfReq id = 0 x 4 [0xc890720f magic] 91
  PPP receive ConfAck id = 0 x 4 [0xc890720f magic] 94
  PPP receive ConfReq id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xb4a2146c magic] 121
  PPP sends ConfAck id = 0 x 2 [mru] 1492 [auth chap, MD5] [0xb4a2146c magic] 118
  PPP LCP UPWARD. 61
  PPP receive challenge id = 0 x 1, <2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x2x>, name = 127 Huawei
  PPP receive failure id = 0 1 76 x
  PPP CHAP 84 peer authentication failed
  PPP LCP DOWN. 63
  PPP sends TermReq id = 0 x 5 failed to authenticate ourselves Exchange 113
  PPP (LCP) send reason Terminate-Request Failed to authenticate ourselves pair. 131
  PPP User name and password authentication failed. 98
  PPP receive id = 0 3 75 x TermReq
  PPP sends TermAck id = 0 3 72 x
  PPP sends TermReq id = 0 x 6 failed to authenticate ourselves Exchange 113
  PPP (LCP) send Terminate-Request reason FM timeout. 101

  Does anyone have the same experience?

  Please advice.

  Thank you.

  Oh, I'm sorry, I just found out that I put the wrong password PPPoE. After you type the correct password, it works now. Thank God...

• Authenticated key management (AGM) succeeded not keys in Windows Vista SP2

  When wireless connection windows authentication fails and the connection times out. The root cause of detail is that a level 2 security key exchange did not generate
  multicast keys before timeout. I am aware that Microsoft recommends updates to SP2 which I am running KB935791. The problem is that it is a known problem that I have to solve that Vista has no auth keys and handle unrecognized during the passage of WPA... It is supposed to be a fix for this problem, but we can help you find it very difficult

  Hello

  Uninstall and reinstall the drivers of NIC from Device Manager and check if this can help, follow these steps:

  (a) start Control Panel, click hardware and sound and then click Device Manager.

  (b) to expand the node that represents the type of device you want to uninstall, right click on the entrance to the unit and click on uninstall.

  (c) in the dialog box confirm the device removal, click OK to start the uninstall process.

  (d) when the uninstall is complete, the site of the factory driver download and install the drivers.

  (e) after installing the drivers, install the latest updates.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can download the drivers from the manufacturers Web site.

• Sending a big boost with the SDK high-level examples of results in a timeout

  Hello

  I try to send a big boost with the sample of high level. I have registered my valuation Service Push Blackberry application, deployed the SDK in Tomcat on my computer, my app has added to the list of high level sample applications and tried to send a little help with a message in plain text during broadcast (to the Subscriber of "push_all").

  This resulted in an IOException caused by a timeout: "taken IOException sending message to the address URL of PPG: https://cp3520.pushapi.eval.blackberry.com/mss/PD_pushRequest.

  I have a few test:

  1. I send a simple GET request in Forefox on https://cp3520.pushapi.eval.blackberry.com/mss/PD_pushRequest which resulted in 401, so I can reach this address.

  2 I tried to reproduce the request with a Firefox plugin. Here are the contents of my application:

  Headers:

  Permission: myBase64encodedcredentials

  limit: QfgeRDy0bk3pYpCMeL8Q

  multipart/related

  Content:

  -QfgeRDy0bk3pYpCMeL8Q
  Content-Type: application/xml; Charset = UTF-8

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.DTD">
  
  
  

  
  
  
  
  -QfgeRDy0bk3pYpCMeL8Q
  Content-Type: text/plain; Charset = UTF-8
  Push-Message-ID: bgsCVVfx6AD-1361888782229

  test
  -QfgeRDy0bk3pYpCMeL8Q-

  This resulted in a timeout.

  3 I tried the same query without the "multipart/related" header, and got this response:

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.DTD">

  So I guess that it is not an authentication problem.

  Do you know what could prevent the response to be sent?

  Hello

  I finally solved the problem!

  In fact when I tried to reproduce the request I made a mistake in the headers, I put two different instead of ' Content-Type: multipart/related; Boundary = QfgeRDy0bk3pYpCMeL8Q; type = application/xml '. I tried with the firefox plugin again and get the same response as Matt told me in his private message, when tested with my credentials:

  
  http://www.openmobilealliance.org/tech/DTD/pap_2.1.dtd">http://cp3520.pushapi.eval.blackberry.com/mss/PD_pushRequest" sender-name="RIM Push-Data Service" reply-time="2013-02-27T10:48:40Z">
  

  For the serevr part I think it was because of a proxy problem, you said. I could not download the installer of linux SDK on the Blackberry site, I installed the Windows SDK on my Windows computer, and I think that Java options were not used by the server (which is strange because I put it in the Tomcat service Java options). I copied the folder of the SDK on my Linux computer, added the Java options in catalina.sh and everything worked well with the sample of high level. So I guess that the problem comes from my Java Windows Setup.

  The tricky thing, I don't really understand is the timeout for the request with bad headers.

  Now, I need to know why the app is not subscribed to the service push, but it is another problem.

  Thank you all!

  Julien