Machine + user authentication / MAR / Timeout

Similar Questions

• 802. 1 x authetication machine & user

  When you use CTA 2.1 with the supplement of 802. 1 x, first the machine would authenticate on startup, then when the user connects they would re-authenticated and all user-specific settings apply. It was clear in the journals of the ACS.

  However, it seems when you use native 802. 1 x on a machine XP w / no CTA, first the machine authenticates, but when the user logs there is no re-authentication of the user. If I stop or disconnect the switch connected and activate/re-connect port it then the ACS logs show the place of the user authentication.

  What is the design of the native implementations of 802. 1 x? And is there a way I can do the dual authentications (machine & user login) as it seemed to make with the CTA 802.1 x?

  You must enable EAPOL-updates in the works on the machine.

  This should help:

  http://msdn.Microsoft.com/en-us/library/ms706538.aspx

• BlackBerry smartphones "the application cannot be processed until multiple pending user authentications are resolved (error Id: 40831).

  I tried to login to my account to update to Windows Live Messenger and got this error message. What should I do to correct this? I have not attempted to identify some time, so I'm afraid it says "multiple pending user authentications.

  According to me, whereas it has proved to be a problem of Blackberry App World (or BB in general). A battery lawn mower folding to solve the problem... Thanks for your suggestion though

• VPN3002 PAT-Mode and individual user authentication

  Hi all

  I have three questions about the VPN3002 connected to a VPN3005 in the PAT mode

  and with authentication of the individual user.

  First of all:

  Is it possible to use this function for several users to the

  private LAN.

  Because I tried this, but when we the second user has been authenticated one could not work more.

  Second:

  When we first meet is YES, can be the users in a group of dispute as the

  VPN3002 Client it self?

  Third:

  That is, when there is a router between the local private network and users?

  Because the field of authentication of user appears only when users

  are directly connected to the private lan.

  I tried with PAT, but this was not possible because the VPN3002 can

  different users.

  I think that it will be possible with NAT, but then I ran to my first question.

  concerning

  Karlheinz

  1 > it is the main function of the user authentication feature see here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3002/3_5/get_star/gs1under.htm#xtocid13

  2 > users cannot be in the other group. Group is dependent of the what the 3002 cumulates in.

  3 > it wouldn't send other subnets connected to the private sector. The design of the 3002 is such that only the subnet behind it, is what it can do vpn for.

  Kind regards

• User authentication with AD Director

  Hey!

  Am having a problem with the management groups.

  I try to make external authentication with users of the AD but fails with one: user authentication failed: Eric: no group admin

  Everything seems fine, political authorization, Menu access, liaison group AD with ISE Super Admin to access the data group

  My user is ok on AD (not locked, expired, or anything)

  Anyone had this problem before?

  THX

  Possibility of vice.

  CSCud31796    ISE - External RBAC fails if Member user from the group containing the apostrophe

  Symptom:

  RBAC using a storage of external identity (AD, LDAP) group mapping fails for a correct user with the groups to access the GUI of the ISE. The following message will appear:

  "User authentication failed: username: admin group.

  Conditions:

  The user is a member of a group that contains the apostrophe character.

  Workaround solution:

  There is no work around in ISE.

  1 rename all groups in the external identity store such that they do not contain apostrophes

  2 remove users participating in the administration of all external groups containing apostrophes ISE

  Jatin kone
  -Does the rate of useful messages-

• TimesTen - 7001: user authentication failed when using XLA

  I installed TimesTen 11.2.1.8.0 on AIX 5.3 System.* user 'oracle '. I created another user of the application 'risk' to use in my application with TimesTen.

  When running my application with the user 'risk' to connect with TimesTen it is OK. But when I want to use the XLA feature, when I call the createDurableSubscriber function, it returns the error

  javax.jms.JMSException: failure of SQLDriverConnect (XlaCommon.c, line 48): S1000 7001 [TimesTen] [driver ODBC of TimesTen 11.2.1.8.0] TT7001 [TimesTen]: user authentication failed - file "db.c", lineno 9722, procedure 'sbDbConnect '.

  It is strange that if I switch to user 'oracle', it works fine.

  Can someone please help understand the reason why.

  Thank you

  You created the user 'at risk' within your TimesTen database?

  CREATE a USER risk IDENTIFIED BY 'some password'?

  You granted the privilege of the user risk to use XLA?

  XLA GRANT at risk;

  Have you used this user name and password in the JDBC URL when connecting to the database application JMS/XLA?

  The 'oracle' user is probably your admin user of the instance (which is the database root) and therefore can use all the features without special action (but of course you never run application as that user).

  Chris

• Connection of the user authenticated to the external proxy

  Hi Experts,
  
  I created an externally authenticated user in the database. And can connect without a password with the syntax below.
  
  SQL > connect / @TESTDB
  Connected.
  SQL > show user;
  The USER is 'SCOTT '.
  
  That user scott has a power of attorney to an another DBuser PROXY_USER authorization.
  I got the syntax but that works only from BONES of the database.
  
  sqlplus [proxy_user].
  SQL * more: Production version 11.1.0.6.0 on Mon 15 Nov 16:28:47 2010
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  Connected to:
  Oracle Database 11 g Release 11.1.0.6.0 - 64 bit Production
  
  I can log in as a user authenticated outside windows CLIENT running on Release 10.2.0.1.0
  
  SQL > connect / @TESTDB
  Connected.
  
  But the syntax of connectivity above Proxy fails with below the CUSTOMER
  
  SQL > connect [proxy_user] / @TESTDB
  SP2-0306: invalid Option.
  Usage: CONN [ECT] [connection] [AS {SYSDBA |}] SYSOPER}]
  where < logon >: = < user > [< password >] [@ < connect_identifier >] | /
  
  But works the same syntax of database OS!
  
  I can connect to TOAD, but can not connect from SQLDEVELOPER or SQLPLUS
  
  My sqldeveloper version is:
  
  Version 2.1.1.64
  Build a HAND - 64.45
  
  and sqlplus:
  SQL * more: Release 10.2.0.1.0
  
  Any idea?
  
  
  Thank you.
  
  Published by: najet November 18, 2010 15:09

  Hi najet

  If you get SQLPLUS work SQLDeveloper (thickness jdbc/oci/instant customer) is definitely worth a try.

  I don't know what the problem with your configuration of the proxy usecases that I am familiar are:
  Through the UI SQLDeveloper

  There are two ways to make proxy connections:
  where p1 is user proxy and c1 is a client of the proxy:

  method 1/single session (if no 2nd password or unique name required)
  Main connection popup
  user: p1 [c1]
  password: p1

  2/two method session
  Main connection popup
  user: p1
  password p1

  context connection authentication

  client proxy: c1
  no password or unique name

  -Turloch
  Team SQLDeveloper

• Rendering of the elements in a JSP page only to users authenticated on adf-security

  Greetings
  
  This is a simple question?
  
  I need to display a link only if I'm with a user authenticated on adf security. could someone provide me with the EL that I have to set the RENDER in my JSP
  
  Thank you

  Try something like:
  ADFContext.getCurrent () .getSecurityContext () .isAuthenticated)

  Therefore, EL must be:

  adfContext.securityContext.authenticated

  You should be able to use the EL generator.

  Vincent

• Invalid user authentication

  Hello
  
  I'm on IOM 9102 + Websphere, I ran the patch_websphere and redeploy the .ear file. But now when I try to connect to the IOM, his throw invalid user authentication and I am not able to connect to the IOM. When I enter the password, its not taking the password and the cursor goes back to the user name text box.
  
  Thank you
  Suren

  This means that it is already disabled. To check, from the command line, run the following:
  wsadmin - port NONE

  This will connect you to the websphere administration tool. Next type:
  securityoff

  This will stop the security that allows you to connect with any username and password. Restart WebSphere.

  From this point you must enable security. Follow these steps:
  -Once WebSphere returns upwards, connect with any what user name and password in the console of websphere.
  -Access security--> user records--> custom
  -Enter the user name "XELSYSADM" and then make sure to ignore case is marked
  -Enter the password xelsysadm for "Server User Password"
  -Click 'OK' and 'Save' in the master configuration.

  I don't have a console of websphere that I have, but this will allow security for the application again. Restart and see what happens.

  -Kevin

• is it possible to make the machine and authentication of users in the same permission profile?

  Hello

  I want to know is - it possible to machine authentication authentication of users arrive at the same time? Something like that...

  Condition

  IF (wired_802.1x and AD:externalgroup computer dommain EQUAL AND Some_domain_user_group EQUAL AD:exteranalgroup)

  Permissions

  then Vlan x

  Basically, I'm just checking a machine in the domain and user is valid only while he should be able to have full access.

  Any help will be of great value.

  Hello

  IF (wired_802.1x and AD:externalgroup computer dommain EQUAL AND Some_domain_user_group EQUAL AD:exteranalgroup)

  -Not possible

  As the authentication of the user and the machine occur in different contexts.

  ACS cannot check them both at the same time.

  With the help of MAR, you can, although club together and reach:

  "machine is part of the domain and user is valid only while he should be able to have full access"

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1235978

  Tips for MAR configuration:

  (1) set the client to authenticate user or computer.

  (2) create two rules in the authorization for the user and and the other for the machine (identity them using the ad group membership).

  (3) enable MAR on the AD on ACS configuration page and set the aging time.

  (4) in rule user, customize and use the condition "Has been authenticated machine" and the value is false.

  Rate if useful

• Wireless, machine and user authentication

  Hi all

  I have a problem with my connection to employee wireless (802. 1 X EAP connection).

  When users are on a wired connection and then come to the employee wireless on XP or 7 machine name is not automatically sent to ISE in the message of 802. 1 x. I have to restart the machine to thave the computer name sent in the 802. 1 x Message.

  Is this normal? Is there any setting to have the name of the auromaticaly machine has sent on the wireless!

  Thanks for the support

  Hi Boris,.

  You mean you use the authentication of the computer? and that is not used correctly when the device is already connected to the wired side? and it is only sending the username? not the name of the computer?

  Well, the problem with the windows machine auth and ACS (and ISE is the same) that windows sends the auth trigger machine only when it starts. for example, if the user is already connected to the auth machine cannot be triggered.
  Rather than restart the machine, I thing logging off and it will trigger demand for auth machine as well.

  Microsoft RADIUS (NPS or the older IAS) can detect the State of machine auth, while the user is running. This is because Windows and the radius of the same provider, they fit together better.

  I know a customer who left the entire RADIUS ACS for NPS becaue of this issue.

  I hope this answers your concern.

  Kind regards

  Amjad

  Rating of useful answers is more useful to say "thank you".

• ACS5 / ISE: PEAP authentication - first then machine user

  Hi on board,

  I have a simple question about AAA with ISE or ACS5 and PEAP.

  As we all know, is the big drawback with the PEAP Protocol, you cannot apply that property of the company not authenticates on the network.

  Example:

  Computer Windows - authentication domain and user PEAP. During GINA of Windows, the computer account is used - after login, the user account is used.

  If I bring my own iPad to society, I just have to activate WLAN, enter my domain credentials and voila! I am!

  Some companies want to restrict the network only for devices of the company.

  Therefore, is a simple solution for this, EAP - TLS - but we know all that some guys do not want to put in place an infrastructure to full blown public key...

  So here's the question:

  Is is possible to enforce an order of authentication in ISE or ACS.

  If a request for a certain MAC address of the client authentication happens (Calling station ID), this identity must authenticate with a first computer account (the prefix "host\") and that once the machine authentication is successful, the authentication of the user is authorized.

  If someone wants to connect with a user account, then this is not possible, if there was not a sign of the old machine.

  So is this possible with the ACS or ISE?

  Thanks in advance!

  Johannes,

  You can prevent ipads to connect forcing the machine authentication check the authentication of the user policy.

  http://www.Cisco.com/en/us/docs/security/ISE/1.0/user_guide/ise10_authz_polprfls.html#wp1116684

  You can also use the profiling feature in ISE to reject apple devices to access the network.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Help with State Machine user Sequentail events

  I'm trying to create a program using the state machine which include events genreated user to jump between States. Also, I want the program to require a sequence of events to be genreted before entering in some States.

  For example:

  States: Init, idle, a-1, A-2, A-3, B - 1 and stop

  If a-1 State is selected, the user must enter the setting and select the condition A-2.
  The user cannot directly jump without having to access the mode a-1 to A - 2
  If the user selects the a-1 State, he should have the possibility of not input parameter and jump to another State as B-1 or Stop

  State A-3 can be entered automatically by State A-2.

  How to program the machine in order to do what I want? I've updated a sampling program. I'm not sure if I impleted the program properly. The user Panel hangs if I enter State a-1, and then press the Stop button. It does not allow me to leave the a-1 State and forces me to go to State A-2.

  A few other questions:

  -How to initialize all values of boleean to 0 during my Init State?

  -Why is a timeout value?

  Hey there, I developed example of Jacobson on a bit here to illustrate the case "Idle, how far to walk, ' your state machine diagram.

  Some keys on the front panel when you are in the bad condition will do nothing, as you can see, because I only check for buttons, I would like to respond to each State. For example, by pressing "Start on" the State of market won't do anything because this isn't a valid button, but pressing "Quit" will bring you to Idle. To implement the rest of the state machine, it is up to you!

• For the WLC domain user authentication

  Hi guru

  Im having a problem in the configuration of my WLC domain users. I have ACS v3.3 and WLC 4112.

  I followed these instructions, but still I keep to authenticate whenever I tried to connect my laptop to some SSID. And in addition, the windows login me invite only once. Please help me

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml#manual

  Thank you.

  What says "Machine Authentication is not allowed"?

  Make sure that ACS helped him:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a00801df0e4.shtml

• Machine based authentication using EAP - TLS, MS CA and 5.2 of the ACS

  I use ACS 4.2 for Windows for a couple of years now and I'm pretty comfortable with it.  5.2 model is much more different than what I expected.  We downloaded the trial in our laboratory for 90 days, and I try to get 802. 1 x wired works so we can be sure that we want to buy it.  I've looked everywhere and I have been unable to find some basic instructions on how to configure the following in a step by step process scenario:

  1. integrated AD

  2 EAP - TLS

  3 certificates

  4 Microsoft CA

  5. the applicant is XP SP 3

  6 non-Cisco 802.1 x compatible switches (switches are not the question)

  I got GANYMEDE to work fairly easily, but I am confident the issues I have are user based :).  Does anyone know of a doc somewhere that goes on a scenario like this (in addition to the user manual and docs of migration ISBN)?  Also, we have the assurance of software on our box 4.2 - TAC support questions we have on the 5.2 box while we are it do demonstrations?

  Thanks in advance.

  Hello, Christopher.

  I'll try to give you some tips to achieve what you want.

  Additional info can be found in the user guide:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/acsuserguide.html

  1. in the identity store / Active directory, check "enable machine authentication.

  2 import a certificate for ACS

  Go to System Administration > Configuration > Local Server Certificates > Local certificates and click the Add button.

  Select how you want to import the certificate, and then verify the Protocol EAP

  3. Add your switches as aaa clients

  Access network resources > network hardware and the AAA Clients, click on create and add configure address IP + shared secret for the RADIUS.

  4-go to access policies > Access Services and click on create a new access service.

  Select the selected Type of Service and network access in the list.

  Verify the identity, group mapping and authorization

  5 - go to the access policies > rules of selection and select "Rule based selection result" if not already done, then click Customize at the bottom right of the screen, and then add the properties that allows you to match your device with which you want to do TLS.

  You can use the IP address of devices, or you can create a NDG (in network resources), assign devices to the NDG and match this NDG in your rule.

  If all your switches RADIUS will make eap - tls, you can change the rule

  Rule-1

  Ray game

  Default network access

  While in the result, you choose your service of access created in step 3.

  6 - go to the access policies and click on the access service that you created in step 3. In the allowed Protocols tab, see EAP - TLS

  7. unfold your access service menu, and then click identity. Select your ad as being the source of the identity

  8. check that the 'Allowed access' rule is selected in the authorization to access your service

  These measures define your devices, and then create a rule to say that ACS must use an individual service for this access devices and set this access service to use AD as authentication.

  Again, what are the basic steps, he may miss some things to do depending on your configuration, but I hope this will help you.

  ACS 5 may be difficult at first, but once you get your hands on it, you will see that it is powerful.