auto collapse a mobile menu accordion when you click on links to anchors on the same page

Similar Questions

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• 36.0.4 Firefox has stopped working with flickr. (Works w/IE) When you click on a photo, I give the error message: something has gone wrong. Click 'OK' to reload. .

  Following the recent update for Firefox 36.0.4, I can not use Flickr, either when you are connected or if not logged into Flickr. When I click a picture, instead of having the enlarged image, I get the following error message: "error - something went wrong. Click 'OK' to reload the page, or 'Cancel' If you want to continue browsing the page (you won't be able to perform all the actions, however). »

  The problem does not occur with Internet Explorer.

  I'm on Windows 7 Home Premium, but there is no change to the computer before the problem with Firefox and Flickr started.

  I'm glad to hear it works now as expected. If he have more questions please do after return and will be happy to help you.

• Crash when you click some links (I crash report #)

  FF hangs when you click on a link (sometimes random links, but can be reproduced reliably). It happened when trying to submit the issue of the accident.

  Easy way to reproduce:

  Visit: http://www.sciencedaily.com/releases/2009/04/090418084813.htm

  Scroll to the end of the article, click on the link to "" more information is available on: http://www.microtransat.org/".

  Which should cause the crash.

  Alternative method (if you want a reliable site):

  Ask a question of accident on this website (mozilla), click on "Click here for detailed instructions" in the "Crash IDs" section.

  Insta-crash every time.

  Reinstalling FF, did the trick! I even used my old profile and it works very well.

  It seems that the latest update of FF corrupt something.

  Thanks for the help! I don't honestly think a reinstall would fix anything, as it rarely does. Here, it's rare treats!

  Thank you all!

• Unable to set usage, only allowed 1%. When you click OK ' could not ask for the parameters for the reason next 0x8007007b '.

  Windows 7 Home Premium (64-bit) Service Pack one.  Unable to set usage, only allowed 1%. When you click OK or apply. Get error message» Could not apply the settings for the following reason: the syntax of label file name, directory or volume is incorrect (0x8007007b).

  Original title: System Restore

  Hello

  You did changes to the computer, before the show?

  The error 0x8007007B occurs when the system is configured to store the restore on a wrong path or location points

  Follow these steps and check.

  a. click Start, type sysdm.cpl and press enter.

  b. click on the System Protection tab.

  c. automatic restore points, deselect any location invalid or duplicate.

  d. click on check the C: drive with the Windows Logo.

  e. click apply , and then click on Ok.

• Why a tab and a new window opens when you click a link

  When you click on a link in a new window AND new tab open. They stack above the other on the desktop slow down the computer. We run OS X EL CAPITAN.

  With the recent "update" I'm having this problem too. Navigation became a royal PITA. 27 windows open at the same time? It looks like nobody tested before FORCING the update that does not need to be updated.

• Can'tr remember the witch program to start when you click a link

  If I create a shortcut on the desktop OR receive an email (Outlook Express) with a link to the internet, then he always asks what program starts when I click on the link.

  I tried 'Open with' and pointed out IE and chackmarked 'Always' and then okay, but NEXT time I click the link, I have to specify new IE - as if he will not remember the settings of the first.

  What's wrong?

  For web browsers, use "Set Program Access and Defaults" control which browser opens.

  This should be a link in your Start Menu, but if you cannot find it there, go to control panel and open Add / Remove programs.  There should be a link to "Set Program Access and Defaults" to the left of the window.

• When you click on my "History" tab, get the search history not a list where I've been

  When I click on my I get a box that says search history not a list of the history tab where I was.

  Looking for recent locations on your computer or places on the web.

  For the web, click the down arrow on the right end of the box of your browser,

  For places on your computer, click the Start button, and then any library list, photos... then top left under Favorites, you should see two recent locations and has recently changed, if you do not see either of these lists go to Favorites list or a down arrow appears on the left side ads click on Favorites for the menu to appear.

  You can add recent items to the list of the start menu, clicking on a white spot on the windows start menu, then select Properties, click on the Customize button and search for the recent items and check this list and apply and OK.

  Check the two boxes in the area of privacy and apply and OK.

• Where will the emails when you click them as 'not spam' in the spam folder?

  When an email in the spam folder and I click "not spam", where he's going, and how to get it back?

  Hey,.

  I have goggled this problem for you.

  According to AOL:

     "If you see a piece of email that is not spam, click the email, and then click This is Not Spam. The message will be automatically moved to your New or Inbox folder. You should then add that email address to your address book or your Custom Sender List (if you have one set up), so that future emails from this sender will not be sent to your Spam folder."
  

  Hope this helps you.

• How can I fix: Burkina Faso / approval of the separate tabs when you click on links?

  When I click on the link in the email took me to the new tab, he wants me to click the "approve" button to open the link

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

• When you click on firefox50 icon firefox load a blank page

  OK the update downloaded and now when I click on the firefox icon it loads a blank page. already checked avg and its good insofar as the firewall. I have to reset every time firefox50 to use the firefox browser. Help, please

  Brian

  Hello

  I'm glad to hear that your problem has been resolved. If you haven't already done so, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support.

• How to do the "Key-enter" trigger (when you click on enter key) works as the key "F8"?

  Hello. I have another question to ask.

  Oracle Forms 6i.

  I have a form in which SMARTBAR & by DEFAULT is the menu and there is no push buttons.

  In the form, there is a "field" named as "ID no.". After entering "No ID" in the field and click on the button 'Run query' in the menu 'DEFAULT & SMARTBAR', all the details of this respective "No ID" gets displayed in other areas. Even if I press "F8" all fields is displayed with values.

  But I have a requirement, i.e. after the entry "No ID" and click on the 'Enter' key, I want all the values to display.

  So I created a "Key-enter" trigger with the following code:

  BEGIN

  EXECUTE_QUERY;

  END;

  But after entering "No ID" and click on the 'Enter' key, the values are not displayed.

  What can I do to make this happen?

  Thank you.

  It depends on the design of your form. If your article ID is part of the base table block, you can do it.

  On your entry ID, create a KEY-NEXT-ITEM trigger:

  If: system.mode = "ENTER-QUERY" then

  execute_query;

  on the other

  next_item;

  end if;

  Now

  -L' user clicks enter the query (via smart bar icon or F7).

  -User enters ID and click on the button to execute the query.

• "Application not found" error when you click on links within Windows Mail

  Original title: "Windows Mail"

  Mail works find - no problem. However, when there is a link on my email to a web page, I get a message "Application not found". Fine, now not.

  Help!

  Mail works find - no problem. However, when there is a link on my email to a web page, I get a message "Application not found". Fine, now not.

  Help!

  Check your Internet Explorer (or your main browser). He has probably not ALL his faults.

  Start button > default programs > set your default programs > coulm left, click on Internet Explorer (or your main browser) > it doesn't say "this program has all its defaults"?
  If it does not, click on choose by default for this program > put checkmarks on all entries in the list > clikc register.

  Now try to open the link in the email.

  t-4-2

• CHM crashes when you click on links to PDF/word on IE9 files only

  Here's the situation:

  CHM file is created with a few links to items of baggage, which are PDF files. I have links in the two topics and live the table of contents.

  PC with Internet Explorer 8 or less installed, users are able to click on these links and the PDF file opens.

  On PC with Internet Explorer 9 installed, the CHM file breaks down (and worse yet, takes the request that aid was launched since with it).

  The error message is: Microsoft HTML Help executable has stopped working [exit].

  I tried to create a small project with links to the PDF files and word documents, as long as the files of luggage and external links only, and the same thing happens. I tried on several PC (even a Vista PC which was OK when it was IE8 and not OK when I upgraded to IE). I'm running the CHMS off my PC, not on network drives.

  Has anyone else seen elsewhere? I would have thought that other people would have noticed this if it was a generic problem with IE9 and CHM files, but I don't see anyone mention in this forum or anywhere else on google. Makes me think it is something that I did wrong...

  One last thing, I have the file as webhelp output and links worked fine.

  Thanks in advance to anyone who has a suggestion here.

  It was reported and it's really a problem of Microsoft. Link to most any kind of embedded file is causing the problem. The use of PDF files is very common during the construction of a complex aid distribution system.  This issue has been visible since the IE 9 in the recommended Windows updates.  Which covers the last two weeks.

  Tom

• The behaviors do not work when there is a previous div fixed on the same page?

  I have a still image at the beginning of the page.

  After that, I have a div with images in which I applied the swap image behavior, but the behavior does not work.

  If I change the positioning of my image, therefore, if this image is in the absolute position, by report o what either (unless it is fixed), the following divs show the swap image behavior.

  What is going on?

  I found it; is a z-index issue.

  Giving the div fixed negative z-index (-10), the behavior of the rest of the divs is working well.

  It just fit my original drawing at all, but it is not serious. There's a solution.

  Thank you all for your kind replies.