Auto common in normal mode.

Similar Questions

• Not able to hear sound on the Normal mode and safe mode.

  original title: windows-screen is frozen on normal mode had to cut the power to go in safe mode no sound on all channels

  Windows-screen is frozen on normal mode had to cut the power to go in safe mode no sound on all channels

  Hi break it,
   
  (1) you are able to boot to the desktop normally?
  (2) remember to make changes to the computer before the question?
  (3) to when was the last time the sound was working fine?
  (4) what do you exactly mean by windows-screen is frozen?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286
   
  Method 2:
  Perform the system restore from SafeMode at an earlier date if the system worked very well.
   
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Method 3:
  If you are facing problems with the audio, see the following link:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
  Hope this information helps.

• Something is wrong! Start in safe mode, but it turns out that for Normal mode.

  Mac Mini (late 2014)

  Processor 3 GHz Intel Core i7

  16GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Iris 1536 MB Intel graphics card

  Monitor: DELL U2713HM, use the Apple adapter to connect to the Mac Mini

  I upgraded from Capitan in Sierra and got the problem that after I pressed the power button, the screen is full white. This problem has occurred on the Sierra, never happened in Capitan.

  I went to the Apple store today, they made a few diagnostic and found no problem. Everything is good. System is fine too. In the Apple store, they showed me to press SHIFT after I press the power button and it will start up the Mac in safe mode. They told me this can sometimes help fixing the boot issue. My Mac actually works very well in the Apple store. I tried the power and turned off twice in the store, and there is no problem. I am happy and come home.

  After I go home, I turn on my Mac, it always has the same problem before you go to the Apple store, after I pressed the power button, the screen is completely blank. So I tried to boot mode safe by pressing Shift and taking until I saw the Apple logo on the screen.

  After I log in, I checked my Mac mode, this is actually Normal mode!

  If I intended to power to the top of my Mac in safe mode but it turns out to be normal.

  If I do not press SHIFT and hold it pressed down after I turn on the power, I'll have just a white screen!

  It works very well in Apple store, but not in my own House.

  Anyone know what is happening?

  What is different between your system and the store? Have you taken your own keyboard & they were they that? If you use a bluetooth keyboard try using a wired USB one instead. Is this an original Apple keyboard?

  Do you have other devices connected? If you delete them.

  Please see the article below from Apple, it has information about starting in safe mode without keyboard (by setting a NVRAM variable). If you enter a work boot, you can put the mini in safe mode from there, via the command appears on this page...

  Try safe mode if your Mac does not end commissioning - Apple Support

  I would like to start trying to make another bootable OS disc - either an installation disc or a complete operating system to see if the Mac can be started OK to a different installation of OS - which indicates if the operating system or disk are part of your question, or if the material is simply unable to work correctly at all.

• How to return to normal mode when you use vim shortcuts in the code/style editor?

  I try to use vim shortcuts keyboard for code/style editor in Firefox Developer Edition. I can type 'i' to switch to insert mode, but how do I return to the normal mode? ESC activates / deactivates the pane of the console, but don't come back to me in normal mode.

  Sorry, I misunderstood. I'm not familiar with the way VIM works. CTRL + C doesn't do what you want?

• Begin stripe iMac G5 white lines in normal mode

  Suddenly, I struck out white small vertical lines on my iMac g5 display.

  Start in safe mode, all is ok.

  How can I fix it in normal mode start?

  You could try and see if a reset of the iMac G5 chip power management

  can help; but there is a risk a hardware problem or component failure is

  behind the symptoms you experience in this series of model construction.

  • iMac G5: how to reset the SMU - Apple Support

  If yours is an original iMac G5 reset power management varies; details of the note

  in the above supported the article, about the location of a button on the early model.

  Another article of support on iMac G5 issues, troubleshooting, reset, etc.

  • iMac G5: troubleshooting when your computer won't turn on - Apple Support

  Not sure if a PRAM and NVRAM reset could help because some symptoms may be

  the backlash or LANDAU or power/system management controller reset...

  • How to reset PRAM-NVRAM on your Mac - Apple Support

  Did you try to boot from the installation disc to see if the symptoms in display

  has disappeared? It might mean something in the way of troubleshooting...

  There are possible graphics problem on some models, and some repairs in question

  replacement of parts or with solder flowed again. Some people chose

  Disassemble the unit and heated the graphics card to fix the connection failed.

  And others had problems with power supply capacitor; swollen capacitors are the sign of a

  need replace. and the computer test again to be sure. In addition, if the

  iMac G5 running hot, which may also appear as video gradient. The power

  supplies can be dusty inside, then the computer may need to be cleaned. Any

  thing to do, are to be considered as part of a troubleshooting topic.

  Good luck!

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.

• Does not open in normal mode

  Firefox will crash whenever I try to open it. Then, it opens in safe mode. I have reset and restarted the computer and it still crashes. I sent more than 127 reports of incidents in December only. I tried to reinstall, but it stops and says that he cannot continue to install. None of my programs that use that the internet will open, I get a "stopped working" or Launcher has stopped working message. (PCMatic, Quicken, Malewarebytes, Superfast PC) and many other programs that I downloaded and uninstalled after that they will not load. Nothing seems to fix the problem

  Short do a clean install of windows and start over I don't know what to try next.
  Betty

  I stopped the hardware acceleration and firefox open in normal mode. My programs still have the problem of launch. (Quicken and PCMatic) when I open them when they try to open I get a launcher has stopped working. I get the same problem with IE as well.
  I'm running the scans suggested right now to search for malware.

• How to get delicious back add on "normal mode" mode "Classic".

  Today, all of a sudden I asked me to reconnect to delicious, when I tried to put a bookmark on delicious firefox add on. When I tried to sign in Ferré a pop-up of my delicious bookmarks, but not the sign in the window. I made this several times and now the success. Then I googled for an answer and someone recommended to turn to the classic mode of delicious add on. I did this and found that I didn't want this. Can you please tell me how to get the normal mode of the decicious add to firefox back.

  What is the extension 'Delicious Bookmarks' (https://addons.mozilla.org/firefox/ad.../delicious-bookmarks/)?

  This page says:

  We have also included a classic Mode for those who want the delicious basic buttons without all the features of sync or research. This option is available when you install the add-on and are subsequently available in the delicious menu in Firefox.

  I have not tried myself. Can go you away from Classic Mode using this menu?

  (When I followed the link for support, it seems that support is complete, and the Delicious Blog suggests rather to use a bookmarklet: update on the browser extensions.)

• Firefox is faster on the safe mode. Even when I disable all extensions and plug-ins, it does still work on normal mode. What should I do?

  I already tried to uninstall e install again, but rest the problema. When I use safe mode, firefox works correctly. I tried to remove all extensions and plug-ins, but the problem persists. Even my mouse pointer moves slowly around firefox screen when the normal mode. I have synced with another computer and I have no problem with each other.

  Hello lgm11, try turning off hardware acceleration and check again (in safe mode hardware, acceleration is disable).

  Thank you

• MacBook pro works well in safe mode but freezes in normal mode

  Now I'm in safe mode, but if I restart in normal mode. It freezes.

  I have chosen of all the startup items.

  I ran the diagnostic test suggested by Linc Davis report.

  Start time: 10:29:16 04/30/16

  Model identifier: MacBookPro11, 1

  The system version: OS X 10.11.4 (15E65)

  Kernel version: Darwin 15.4.0

  Start mode: security

  Integrity of system protection: enabled

  Since the starting time: 10 minutes

  FileVault: on

  Diagnostic reports

  2016-04-06 CudaDriveInstall crash

  2016-04-06 GoogleTalkPlugin crash

  2016-04-06 IMDPersistenceAgent crash x 2

  2016-04-06 ReportCrash crash

  2016-04-06 cloudd crash

  2016 04-06 com.apple.CommerceKit.TransactionService crash

  2016-04-06 recentsd x 5 accident

  2016 04-06 suggestd accident x 5

  Crash of Microsoft Error Reporting 2016-04-12

  2016 04-27 com.apple.WebKit.WebContent crash

  Journal

  30 Apr 09:13:45 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:13:46 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:13:46 en0: configuration of error transmission antenna (index = - 1).

  30 Apr 09:48:26 launchd process [1]-l' system of limitation of disabling i/o level

  30 Apr 09:48:26 launchd process [1] disable the CPU - the system-wide limit

  30 Apr 09:53:06 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 Apr 09:53:12 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x30684b4c8b15bb07, the provider is 0x30684b4bcb530207

  30 Apr 09:53:12 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 Apr 09:53:13 en0: antenna diversity (index = - 1) Configuration error.

  30 Apr 09:53:13 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:16: 15 launchd process [1]-l' system of limitation of disabling i/o level

  30 AVR 10:16: 15 launchd process [1] disable the CPU - the system-wide limit

  30 AVR 10:17: 41 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:17: 47 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0xaba80277a3767cd9, the provider is 0xaba80276e3f4a6d9

  30 AVR 10:17: 47 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:17: 47 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:17: 47 en0: configuration of error transmission antenna (index = - 1).

  30 AVR 10:17: 51 SIOCPROTODETACH_IN6: error utun0 = 6

  30 AVR 10:19: 59 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

  30 AVR 10:19: 59 jnl: b (1, 4): replay_journal: from: 16072192 to: 3949056 (joffset 0 x 19502000)

  30 AVR 10:19: 59 jnl: b (1, 4): rereading of newspaper.

  30 AVR 10:20: 05 IO80211ControllerMonitor::configureSubscriptions() cannot add the _controller subscriptionIO80211Controller::start is 0x79b5767eccf49abf, the provider is 0x79b5767e0d328ebf

  30 AVR 10:20: 05 init: error getting of PHY_MODE;  using MODE_UNKNOWN

  30 AVR 10:20: 05 en0: antenna diversity (index = - 1) Configuration error.

  30 AVR 10:20: 05 en0: configuration of error transmission antenna (index = - 1).

  Demons

  com Apple.Installer.osmessagetracing

  launchd

  / System/Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

  -com.cisco.anyconnect.gui

  / Library/LaunchAgents/com. Dell.Scan.Dell2155ColorMFP.ButtonListenerAgent.plist

  -com.dell.scan.Dell2155ColorMFP.ButtonListenerAgent

  /Library/LaunchAgents/com.Google.keystone.agent.plist

  -com.google.keystone.system.agent

  /Library/LaunchAgents/com.TeamViewer.TeamViewer.plist

  -com.teamviewer.teamviewer

  /Library/LaunchAgents/com.TeamViewer.teamviewer_desktop.plist

  -com.teamviewer.desktop

  /Library/LaunchDaemons/com.Adobe.fpsaud.plist

  -com.adobe.fpsaud

  / Library/LaunchDaemons/com. Apple.Installer.osmessagetracing.plist

  -com.apple.installer.osmessagetracing

  / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

  -com.cisco.anyconnect.vpnagentd

  /Library/LaunchDaemons/com.cudadrive.cudadrivesvcd.plist

  -com.cudadrive.cudadrivesvcd

  /Library/LaunchDaemons/com.Google.keystone.daemon.plist

  -com.google.keystone.daemon

  / Library/LaunchDaemons/com. Microsoft.Office.Licensing.Helper.plist

  -com.microsoft.office.licensing.helper

  /Library/LaunchDaemons/com.TeamViewer.helper.plist

  -com.teamviewer.Helper

  /Library/LaunchDaemons/com.TeamViewer.TeamViewer_Service.plist

  -com.teamviewer.service

  Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist

  -com.citrixonline.GoToMeeting.G2MUpdate

  Beams

  /System/Library/Extensions/JMicronATA.kext

  -com.jmicron.JMicronATA

  / / Library/Internet Plug-Ins/Flash Player.plugin

  S/O

  / Library/Internet Plug-Ins/googletalkbrowserplugin.plugin

  -com.google.googletalkbrowserplugin

  / Library/Internet Plug-Ins/o1dbrowserplugin.plugin

  -com.google.o1dbrowserplugin

  / / Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin

  -com.microsoft.sharepoint.browserplugin

  / / Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin

  -com.microsoft.sharepoint.webkitplugin

  / / Library/Internet Plug-Ins/Silverlight.plugin

  -com.microsoft.SilverlightPlugin

  / Library/PreferencePanes/Dell 2155 Color MFP.prefPane

  -com.dell.scan.Dell2155ColorMFP.prefPanel

  / Library/PreferencePanes/Flash Player.prefPane

  -com.adobe.flashplayerpreferences

  /Library/security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle

  -com.teamviewer.AuthorizationPlugin

  / Library/Widgets/Status Monitor.wdgt

  -com.dell.print.statusmonitor.widget

  Library/Address Book Plug-Ins/SkypeABDialer.bundle

  -com.skype.skypeabdialer

  Library/Address Book Plug-Ins/SkypeABSMS.bundle

  -com.skype.skypeabsms

  / Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin

  -com.citrixonline.mac.WebDeploymentPlugin

  Content of/etc/hosts

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  Content of /etc/pf.conf

  scrub-anchor "com.apple / * '.

  NAT-anchor "com.apple / * '.

  RDR-anchor "com.apple / * '.

  dummynet-anchor "com.apple / * '.

  Anchor "com.apple / * '.

  load the "com.apple" anchor of "/ etc/pf.anchors/com.apple".

  Content of/etc/syslog.conf

  install.* @127.0.0.1:32376

  Content of /etc/pam.d/authorization

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH pam_ntlm.so optional use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  Content of /etc/pam.d/checkpw

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so no_check_home no_check_shell

  Content of /etc/pam.d/chkpasswd

  AUTH required pam_opendirectory.so

  account required pam_opendirectory.so

  password required pam_permit.so

  session required pam_permit.so

  Content of /etc/pam.d/cups

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/pam.d/ftpd

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Contents of /etc/pam.d/login

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session required pam_uwtmp.so

  session pam_mount.so in option

  Content of /etc/pam.d/login.term

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_uwtmp.so

  Content of /etc/pam.d/other

  AUTH required pam_deny.so

  pam_deny.so account required

  password required pam_deny.so

  session required pam_deny.so

  Content of /etc/pam.d/passwd

  AUTH required pam_permit.so

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_permit.so

  Content of /etc/pam.d/rshd

  AUTH required pam_permit.so

  account required pam_nologin.so

  account required pam_opendirectory.so

  session required pam_launchd.so

  Content of /etc/pam.d/screensaver

  Pam_krb5.so AUTH optional use_kcminit use_first_pass

  AUTH required pam_opendirectory.so use_first_pass nullok

  account required pam_opendirectory.so

  account sufficient pam_self.so

  Group accounts required pam_group.so no_warn = admin, wheel fail_safe

  account required pam_group.so no_warn deny group = admin, wheel ruser fail_safe

  Content of /etc/pam.d/smbd

  account of the sacl_service pam_sacl.so = allow_trustacct smb

  session required pam_permit.so

  Content of /etc/pam.d/sshd

  Pam_krb5.so AUTH optional use_kcminit

  AUTH pam_ntlm.so optional try_first_pass

  AUTH pam_mount.so optional try_first_pass

  AUTH required pam_opendirectory.so try_first_pass

  account required pam_nologin.so

  account of the sacl_service pam_sacl.so = ssh

  account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  session pam_mount.so in option

  Content of /etc/pam.d/su

  AUTH sufficient pam_rootok.so

  AUTH required pam_opendirectory.so

  Group accounts required pam_group.so no_warn = admin, wheel tweak root_only fail_safe

  no_check_shell account required pam_opendirectory.so

  pam_opendirectory.so password required

  session required pam_launchd.so

  Content of /etc/pam.d/sudo

  AUTH required pam_opendirectory.so

  account required pam_permit.so

  password required pam_deny.so

  session required pam_permit.so

  Content of /etc/periodic/daily/110.clean-tmps

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_tmps_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_tmps_days"]

  then

  echo ' $daily_clean_tmps_enable is defined, but '.

  "$daily_clean_tmps_days is not.

  RC = 2

  on the other

  ECHO «»

  echo "deleting old temporary files:

  Set f noglob

  args = ""-atime $daily_clean_tmps_days - mtime + $daily_clean_tmps_days ""

  args = "${args} - ctime + $daily_clean_tmps_days.

  dargs = "- empty - mtime + $daily_clean_tmps_days"

  dargs = "${dargs}! "- name .vfs_rsrc_streams_."

  [n "$daily_clean_tmps_ignore"] & & {}

  args = "$args '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  dargs = "$dargs '" echo "${daily_clean_tmps_ignore %} ' |" ' "

  sed / [] [] * / ! -name/g "

  .. .and 21 more line (s)

  Content of /etc/periodic/daily/130.clean-msgs

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_msgs_enable' in

  [AA] [Ee] [Ss])

  If [! d/var/msgs]

  then

  echo ' $daily_clean_msgs_enable has the value but msgs/var / ' \.

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "cleaning of the old ads system:

  [n '$daily_clean_msgs_days'] & &

  ARG =-${daily_clean_msgs_days #-} | ARG =

  GSM-c $arg & & rc = 0 | RC = 3

  FI;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/140.clean-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_clean_rwho_enable' in

  [AA] [Ee] [Ss])

  If [-z "$daily_clean_rwho_days"]

  then

  echo ' $daily_clean_rwho_enable is activated but '.

  "$daily_clean_rwho_days is not defined.

  RC = 2

  Elif [! d/var/rwho(1)]

  then

  echo "$daily_clean_rwho_enable is enabled but/var/rwho(1)."------

  "does not exist".

  RC = 2

  on the other

  ECHO «»

  echo "deleting obsolete files in/var/rwho(1):

  case '$daily_clean_rwho_verbose' in

  [AA] [Ee] [Ss])

  print = -.

  *)

  print =;

  .. .and 14 more line (s)

  Content of /etc/periodic/daily/199.clean-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  If [/ var/spool/fax - d]; then

  ECHO «»

  echo "deleting files fax scratch."

  CD/var/spool/fax & & \

  To find. -type f-name ' [0-9] *. [0-9] [0-9] [0-9] "- mtime + 7 - delete > / dev/null 2 > & 1;"

  FI

  Content of /etc/periodic/daily/310.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_accounting_enable' in

  [AA] [Ee] [Ss])

  If [!] ACCT - f]

  then

  echo '$daily_accounting_enable has the value but ACCT '.

  "does not exist".

  RC = 2

  Elif [-z "$daily_accounting_save"]

  then

  echo ' $daily_accounting_enable is defined, but '.

  "$daily_accounting_save is not.

  RC = 2

  on the other

  ECHO «»

  echo "accounting log rotation and collection of statistics:

  CD/var/account

  RC = 0

  n = $daily_accounting_save

  RM f ACCT. $ ACCT n.gz. $n || RC = 3

  m = $n

  .. .and 18 several line (s)

  Content of /etc/periodic/daily/400.status-disks

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_disks_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "record status:

  DF $daily_status_disks_df_flags & & rc = 1 | RC = 3

  ;;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/420.status-network

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_network_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "State of the network interface:

  case '$daily_status_network_usedns' in

  [AA] [Ee] [Ss])

  netstat-i & & rc = 0 | RC = 3;

  *)

  netstat - in & & rc = 0 | RC = 3;

  ESAC;

  *) rc = 0;

  ESAC

  output $rc

  Content of /etc/periodic/daily/430.status-rwho

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$daily_status_rwho_enable' in

  [AA] [Ee] [Ss])

  RWHO(1) = $(echo/var/rwho / *)

  If [f ' ${rwho(1) % *} "]

  then

  ECHO «»

  echo "the system of Local network status:

  PROG = ruptime

  on the other

  ECHO «»

  echo "Local System State:

  PROG = running time

  FI

  RC = $($prog | tee/dev/stderr | wc-l)

  If [$?-eq 0]

  then

  [$rc - gt 1] & & rc = 1

  on the other

  RC = 3

  FI;

  .. .and 3 more lines

  Content of /etc/periodic/daily/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $daily_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/monthly/199.rotate-fax

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  ECHO «»

  printf %s "rotation of the fax log files:

  CD/var/log/fax

  I'm in * .log; do

  If [f ' ${i} "]; then

  echo-n "$i".

  If [x - / usr/bin/gzip]; then gzext = ".gz". else gzext =""; FI

  If [f ' ${i} $.3 {gzext} "]; then mv-f "${i} $.3 {gzext}" "${i}.4$ {gzext}"; FI

  If [f ' ${i} $.2 {gzext} "]; then mv-f "${i} $.2 {gzext}" "${i} $.3 {gzext}"; FI

  If [f ' ${i}.1$ {gzext} "]; then mv-f "${i}.1$ {gzext}" "${i} $.2 {gzext}"; FI

  If [f ' ${i}.0$ {gzext} "]; then mv-f "${i}.0$ {gzext}" "${i}.1$ {gzext}"; FI

  If [f ' ${i} "]; then mv-f "${i}" "${i}.0" & & if [x - / usr/bin/gzip]; then gzip-9 "${i}.0. DIY FI

  Touch "${i}" & & chmod 640 ' ${i} "& & chown root: admin" ${i} ".

  FI

  fact

  ECHO «»

  Content of /etc/periodic/monthly/200.accounting

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  oldmask = $(umask)

  umask 066

  case '$monthly_accounting_enable' in

  [AA] [Ee] [Ss])

  W = / var/log/wtmp

  RC = 0

  Remove = NO

  If [$rc - eq 0]

  then

  ECHO «»

  echo "doing the accounting of connection:

  RC = $(ac-p |) Sort - nr k 2 | Tee/dev/stderr. WC - l)

  [$rc - gt 0] & & rc = 1

  FI

  [$remove = YES] & & rm-f $W.0;

  *) rc = 0;

  ESAC

  umask $oldmask

  output $rc

  Content of /etc/periodic/monthly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $monthly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Content of /etc/periodic/weekly/320.whatis

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  case '$weekly_whatis_enable' in

  [AA] [Ee] [Ss])

  ECHO «»

  echo "reconstruction whatis database:

  MANPATH ='/ usr/bin/manpath - q'

  If [$? = 0]

  then

  If [-z "${MANPATH}"]

  then

  echo "manpath impossible to find directories manpage.

  RC = 3

  on the other

  RC = 0

  /usr/libexec/makewhatis.local "${MANPATH}" | RC = 3

  If [X "${man_locales}"! = X]

  then

  I'm in ${man_locales}

  do

  LC_ALL = $i /usr/libexec/makewhatis.local - a------.

  -L "${MANPATH}" | RC = 3

  .. .and 9 more line (s)

  Content of /etc/periodic/weekly/999.local

  If [r - etc/defaults/periodic.conf]

  then

  . /etc/defaults/periodic.conf

  source_periodic_confs

  FI

  RC = 0

  script in $weekly_local

  do

  echo "

  case '$script' in

  /*)

  If [f "$script"]

  then

  echo "Running $script:

  sh $script | RC = 3

  on the other

  echo "$script: no file.

  [$rc - lt 2] & & CR = 2

  FI;

  *)

  echo "$script: not an absolute path.

  [$rc - lt 2] & & CR = 2;

  ESAC

  fact

  output $rc

  Contents of the /Library/Preferences/com.apple.security.appsandbox.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  < key > UnrestrictSpotlightContainerScope < / key >

  < true / >

  < / dict >

  < / plist >

  Contents of the /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (text of XML document)

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  < plist version = "1.0" >

  < dict >

  Flags kernel < key > < / key >

  < string > < / string >

  < / dict >

  < / plist >

  Featured: indexing and search disabled

  Firewall: on

  Small files: 43

  Time elapsed (s): 272

  If it works in Mode safe, look in system preferences > users and groups > login items and delete items from opening of any third party. Also look in Library/StartupItems. Nothing is put in this folder by default, so something in here belongs to you. Then log out and back in or restart and test.

• My iMac doesn't work that in safe mode, normal mode the screen layout is really weird. Help, please! :)

  Hi guys,.

  Since yesterday my iMac 27 inches of the end 2009 has acted weird. Text was not good more visible and popupscreen were empty, white or black. (do not know why they are uploaded in reverse)

  

  Then I tried a clean install. Screen was working again fine. Then formatted my drive and installed the new OSX.

  

  Download went fine, but when installing the pop-up screens were not visible.

  

  After a few random reboots on my side, it worked again.  Thus, installation...

  But... Now, I always have the same question. In safe mode, everything works fine, but in normal mode, the screen is *. Pop - up screens are blank/black or white, the numbers are mixed, etc. What it can be.

  I already installed it on an external HARD disk, reset the SMC and the PRAM, Test hardware (message only 1 failure: 4sns/1/40000000: TH00 - 9,000.) "But I think it's because I installed my SSD later, that's why I need to use a program like HDD control to control the fan).

  so... What can be? I've tried everything! If any of you guys could help me, I would like to do a happy dance ;-)

  You have a sensor error. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  Install El Capitan from scratch

  Restart the computer. Immediately after that the chime hold down the command and R until the Apple logo appears. When the Utility Menu appears:

  1. Select utility disc in the Menu Utility, then click the continue button.
  2. When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) in the list to one side.
  3. Click Delete in the main window of disk utility. A panel will fall.
  4. Define the type of Format Mac OS extended (journaled).
  5. Click on the apply button, then wait for the done button to activate and click on it.
  6. Quit disk utility and re-enter the Utility Menu.
  7. Select reinstall OS X and click on the continue button.

• Cannot connect the macbook pro in normal mode

  Cannot connect the macbook pro in normal mode

  Are you getting errors?

  How do you connect? You use Safe Mode?

  What year/model MacBook Pro you are using and what version os OS X are you running?

• in normal mode, the page disappears off the coast of the right side of the screen. This does not happen in full screen. What can be done to correct the report to the screen to normal screen?

  version 5 loaded on windows 7. all went well for a while. one day, using, normal screen ratio doubled in width; that is half of the page disappears off the screen to the right (on a widescreen). When applied full-screen mode, the ratio is very good. It only happens in normal mode, which is the generally preferred option. I can't determine all means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal mode. not when the program is opened from keyboard page is correct for a moment, and then increases the width with 1/2 page dissappearing.

  This problem may be caused by the extension of the toolbar of Babylon 1.1.8

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I opened a Web site and it zoomed in somehow. He now is in zoom mode. I don't know how to get back to a normal mode

  I opened a Web site and a four cursor arrow opened and he zoomed in. I can't zoom in normal mode. Please notify.

  Reset zoom: CTRL + 0 (zero)

  • See: Page Zoom and Text Zoom

  cursor arrow four: You can be your arrows up/down mode of navigation with the keyboard so you immediately at the top and bottom of the page only. Press the F7 key to toggle the keyboard navigation.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Black screen after login on Satellite L350-20 q (normal mode)

  My Satellite L350-20 q running Vista Basic.
  After the connection, which is normal, I'm going to the arrow then turning to a permanent black screen when I start in normal mode.
  In safe mode, I have a normal behavior and I can work. No malware present a Spybot report. But my Avast antivirus is doesn't seem to work in safe mode.
  Do you have an idea about this problem?

  A colleague advised me to update my graphics driver which is currently version 06/12/2008 Intel Corporation 7.15.10.I502 for Mobile Intel 4 series express chipset family. What is the URL and the name of the file to download the latest driver?

  Post edited by: normal mode of nigelle added to the title.

  On this virtual path, it is not easy to say what the problem is here. I don't know since when you have this strange problem but if possible, try to roll back the OS to an earlier time until she starts to happen. Use the System Restore tool to do this.

  I don't know what is the seriousness of this problem may be but and if the display driver installation can help. To be honest I don't think. My advice to you is to back up all your important data and install OS again using recovery image installation. After doing this you will have factory again and everything will be OK.

  By the way: I think that this old notebook is supported for Win7. A long time ago I ve installed Win7 32 bit on L300 and there HERE perfectly. Much better than the original Vista OS.