Auto-hide toolbars failure after using external display portable S1

Similar Questions

• My iMac screen went black, I use external display?

  MY iMac screen went out or black.

  Always a good hard drive.

  So can I use an external display to log off

  and wipe the hard drive for recycling.

  Thank you

  Yes. Here is the information on your model:

  Connection of the screen	1 mini DisplayPort
  Display modes	Double view extended and copy video
  External resolution	Up to 2560 x 1600 pixels

• Satellite A10: RGB Port is not installed - can not use external display

  Satellite A10 the RGB PORT is not installed & cannot be used as external display. I tried to install the communication or COM 1. interrupt code. What are the possible solutions?

  Hello

  What did you mean by "not installed"?
  Generally, you don't need to install anything. You don't need any drivers for this port 3.
  Windows XP drivers should work properly.

  Please check device manager if there are errors or yellow exclamation points.
  If the problem occurs for a short time, you can try to use the WinXP restore tool.
  This tool will reduce the BONE until the start.

• HP Pavilion DV7 lid is broken. You want to use external display.

  My screen was damaged and I had a technician to replace it, but in the process, he broke the lid. The hinge brackets broke, scokets for the screw on the lid broke, and I'm unable to get spare parts, so I decide that I want to see if it is possible to disconnect the screen, remove the cover, because he just flip-flops it and use my TV as an external display.

  The problem is when I connect it to my TV via VGA or HDMI, nothing is displayed on the screen until the computer was started in Windows 7. Is there something I can do?

  Hello jcvamp,

  I understand that your screen is broken and you want to use an external monitor.

  You are able to use the external monitor, but as you say you will not be able to load BIOS.

  The BIOS can be displayed on the primary monitor.

• Since Windows 8 my taskbar don't auto hide more, even after you have changed the settings.

  Just upgraded to Windows 8 and my bar tasks don't hide now, even after clicking on auto-hide settings, I tried applying ok then ' ing, and I tried to get rid of any notification, but usually disappear again :/

  Any help would be thank you very much.

  One of the common culprits that breaks auto-hide is the center of the Action.

  To test: click the Action Center icon in the system tray (it's the icon of white flag), when the window pops up to close it. If the taskbar mask that was the likely culprit.
  You can turn off the center of the Action via the control panel > Notification area icons > the system tray icons turn on or off > Action Center in the OFF position.

• Desktop icons reorganized after using external monitor

  Hi, whenever I connect to an external monitor using personalization, my desktop icons completely reorganize themselves after that I disconnect the monitor. It happens every time and is very frustrating. Any help?   Thank you

  Hello whirleygig,.

  ·         You have this problem when you connect a single monitor?

  ·         How you set up your monitors multiple, are set to show the icons of screen sharing?

  ·         Have you tried to disable auto arrange on the computer?

  Try to turn off the Auto arrange feature and check if it works very well.

  Do right click on desktop-> organize arrange icons by-> auto-> uncheck the option.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update failures after using recovery disks (error A 8024, 000)

  original title: Windows update failures as a result of the use of recovery disk

  I used a recovery disc following a replacement of HDD on my Acer laptop and now windows update will not work.  I get an error A 8024, 000.  I tried the MS fix - it tool, but gives an error when it tries to install as well.

  Hello

  I suggest you to disable any program of security on your computer and check if it solves the problem.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.

• detected external display suddenly stopped working - displays black screen

  original title: detected external display suddenly stopped working

  Hello

  I have searched in several forums, but have not been able to completely solve this problem.  It has been set provisionally and has not yet.
  This system I have:
  HP TouchSmart tx2 tablet pc with Windows Vista Service Pack 2 x 64-bit (Home Premium)
  AMD Turion (tm) X 2 Ultra Dual-Core Mobile ZM - 82, 2.2 GHz
  ATI Radeon HD 3200 graphics card
  I have been working for more than a year with a monitor flat screen Dell ST2310 external monitor and works very well with the setting "use external display only.  From one minute to the next two screen went black so I forced a restart and again the same problem.  I decided to manually disconnect the external monitor by unplugging the VGA cable from the laptop that turns on automatically to the main display as it would if I am disconnected display.  When I connected the VGA cable again the same question in the two screens were entirely black.  I unplugged once more the VGA cable if I could change the settings in Windows mobility.  I plugged back in the VGA cable after changing the settings of "external display only" to 'mirror' devices and after playing for a bit, with the Windows Mobility Center, I had the external display to work again my regular settings: "external display only.  This solution lasted a day and now works in the main screen and the external screen is completely black.
  I tried in vain to solutions:
  -Change VGA cables continues to experience the same issue.

  -Tested according to the specifications and Dell monitor Monitor works fine if the backlight is not the problem.
  -Records update for ATI Radeon HD 3200 graphics card and driver generic PnP Monitor and Dell ST2310.
  -Uninstalled ATI Catalyst Manager and re install now as AMD Vision Engine Control Center.
  -Checked AMD Vision Engine Control Center recognizes the connected external display.
  -Uninstalled the driver Dell ST2310 and re installed the driver.
  -On the screen settings have tried to extend the desktop on the external screen (second)
  Now, this is what's going on and don't know how to fix it:

  -Windows Mobility Center detects a monitor external, even when the VGA cable is disconnected.

  -When it detects the external display it sometimes detects it as DELL ST2310, sometimes as a generic Non - PnP monitor.

  -Sometimes under "Monitor" in the Device Manager, there are several monitors generic Non - PnP contained also the Dell ST2310 and generic PnP monitor.

  -When the external monitor is connected, the screen is completely black and does not work even after changing the settings Windows Mobility or Fn F4.
  Help!

  Hello
   
  I also suggest you to update the BIOS. Visit the manufacturer for more information.
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  WARNING:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  See also: http://h10010.www1.hp.com/ewfrf/wc/document?docname=c01881110&tmp_track_link=ot_recdoc/c00678157/en_us/c01881110/loc:4 & cc = us & dlc = en & lc = en & product = 352607 #N624
   
  Thank you

• I use Windows 7 and I can't find how to designate always be on top when it is on auto-hide the toolbar.

  I use Windows 7 and I have 2 questions:

  "" 1. I can't find how to designate the toolbar "always be at the top" when it is on auto-hide.

  2. the selection of 'File' is missing from 'New' in the Catalyst Control Center options - I can no longer create new folders.

  Can someone help me with these questions?

  Question 1: Do a right-click on the taskbar, click Properties.  In the window that opens, you will find the settings to modify its behavior in the way you want.

• MacBook Pro died after using 2 external displays

  On Monday this week, I got a new MacBook Pro. I downloaded Logic Pro X that I use with my keyboard plugged into one of the USB and my audio interface (hearer iD14) plugged into the other. I also use a LG monitor and a Samsung. To do this, I connected a KÖNIG hdm-switch on the HDMI from the MacBook and then inserted two monitors in the switch. It's all very well worked for several hours until the screen went all weird and then the computer is completely dead and it is still very, very dead. I tried now hold the power button for 10 seconds, but that does not help. I also tried Ctrl + alt + shift + power, releasing and pressing the power button once again, without a bit of luck. I tried to load, what does not work either.

  2.2 GHz Quad - Core Intel Core i7, 6 MB of cache L3 (turbo boost up to 3.4 GHz)

  16 GB 1600 MHz DDR3L SDRAM memory

  256 GB of flash storage

  OS X pre-installed (not sure if Sierra was installed when I start the computer for the first time, so I don't really know and now I can't check, so...)

  As the computer is dead, I wasn't using the charger. Then causing do this? Or is it because I used the hardware (monitors, switch) that are not Apple? Or is it simply not recommended using external monitors with MacBook Pro? I really don't understand if I fried it by using it in a bad way, or if I just had a bad luck to get a product with property damage or something.

  I really need to use two monitors, so I hope that's not the problem...

  Someone at - he experienced something similar to this?

  Post edited by: mlnrvlton

  I would resume, they are intended to support two monitors im pretty sure and I use mine with a dell monitor and it is not a problem.

  I would say that what you have done is proper use of the machine, so says apple is not the Dell XPS 13 build 3 screens 4K...

• Shortcut icons on the desktop/taskbar windows thumbnails prevent display after auto hide

  Ive noticed this part of the time in the decades long ongoing saga to get even the simplest parts of windows to work correctly, the taskbar is not reshow auto-hide is because there are some shortcut icons on the side of the taskbar are.  If I move my mouse over the lower part of the screen where there is currently not an icon appears, but if I'm smiling all the way to the side and there's a shortcut, the taskbar often will not see the.  If there is a fix let me know but mostly I write this information cause I wish windows could fix their software to work properly one day. I know that you have a 2 new versions of windows to sell its been years that you have failed to address this simple question, but maybe one day I would actually feel that he still had to pay for a service of microsoft and not feel the need to mod all my Xbox and everything to get half broken services, software, and really bad customer service.

  If you want to influence Windows, join the Insider to the http://insider.windows.com program and submit your front be incorporated.

• How can I disable the auto-hide known file attachments, and why are still on the 10 internet pages where I have to download something if I use firefo

  How can I disable the auto-hide known file attachments and why are they always about 10 Web pages where I have to download something when I use mozila firefox?

  Windows computer

  Ignore the link of the player Shockwave that probably, you mustn't he compared to Flash player because it is barely used nowadays.

  FredMcD, you really need correct/update your clipboard for that.

  The downloadable Shockwave player version (not flashing) is 12.1.3.153 and not 15.0.0.152 as you can be confusing which version of the flashplayer reached before.

  Flash player is 15.0.0.189 and not 14.0.0.179 as you can see at https://www.adobe.com/software/flash/about/

  Flash player is used for good Flash videos like Youtube and Flash games in Shockwave player is little used compared to Flash, for things such as games and online learning tools.

  And please, don't say "I asked. It's the way it is displayed on the site"as you said last time in https://support.mozilla.org/en-US/questions/1026518 , because who says little about why you're wrong ad versions and calling Shockwave player, Shockwave Flash.

• Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Advice appreciated!

  No, you can't.

• Qosmio X 870-116: use of Intel / nVidia GPU internal / external display

  Hello

  I have a Qosmio X 870-116 which have 2 video cards, an Intel onboard and a more powerful Nvidia.
  My problem, I did not how to pass my screen on the Intel card and I see my Nvidia for the display external.

  Someone has an idea to pass on to my first display nvidia card?

  Thank you

  Hello

  Something like this isn't possible.
  You cannot use two cards simultaneously for internal and external display.

  First of all, you can switch between the external and internal view using the Fn + F4 (or just F4) function key

  Secondly the nVidia Optimus technology optimize the performance of the laptop perfectly without a GPU nVidia and Intel graphics card.
  Switching is automatic and requires no reboot of s for laptop.

• Satellite M50-130: no display after the passage of the external display in main monitor

  I have a very strange problem.
  My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen...

  Well, any help would be appreiciated.

  Hello

  Could you please be clearer? Is it possible to see something on the external monitor?
  Do you see something? What happens if you use the function FN + F5 device display?

  I put t know how you managed to set the external display as main screen because on my laptop, this option is grayed out.
  However, you should see the laptop if you will start Notepad in safe mode. Please check!