Computer Pavilion laptop 15-n208tx: recovery

Similar Questions

• need windows 7-64 bit drivers for computer pavilion laptop 17-e004ed

  Installed Windows 7 / 64 bit computer pavilion laptop 17-e004ed. Need windows 7 / 64-bit drivers for hardware parts. Any suggestions?

  Thank you.

  Hello:

  You should be able to use all the W7 x 64 drivers and software for this model.

  Your model uses the Intel HD graphics driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & docname = c04104419 & LC = on & os = 4063 & Product = 6622225 & sw_lang = & #n262

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

• Pavilion g6 - 2400ca: installing drivers for windows 7 on the computer pavilion laptop g6 - 2400ca

  Hello

  I just installed windows 7 instead of windows 8 on my computer pavilion laptop g6 2400 ca, and I'm missing some drivers.

  Here is the necessary drivers, can help you please?

  Bluetooth controller:

  PCI\VEN_1814 & DEV_3298 & REV_00

  PCI\VEN_1814 & DEV_3298

  PCI\VEN_1814 & CC_0D1100

  PCI\VEN_1814 & CC_0D11

  PCI\VEN_1814

  PCI\CC_0D1100

  PCI\CC_0D11

  Network controller:

  PCI\VEN_1814 & DEV_3290 & REV_00

  PCI\VEN_1814 & DEV_3290

  PCI\VEN_1814 & CC_028000

  PCI\VEN_1814 & CC_0280

  PCI\VEN_1814

  PCI\CC_028000

  PCI\CC_0280

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & REV_05

  PCI\VEN_10EC & DEV_8136

  PCI\VEN_10EC & CC_020000

  PCI\VEN_10EC & CC_0200

  PCI\VEN_10EC

  PCI\CC_020000

  PCI\CC_0200

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  PCI device:

  PCI\VEN_10EC & DEV_5229 & REV_01

  PCI\VEN_10EC & DEV_5229

  PCI\VEN_10EC & CC_FF0000

  PCI\VEN_10EC & CC_FF00

  PCI\VEN_10EC

  PCI\CC_FF0000

  PCI\CC_FF00

  WD SES peripheral USB controller:

  USBSTOR\Other

  USBSTOR\RAW

  Hello

  Install:

  RALink Bluetooth 4.0
  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59632.exe

  RALink 802.11 b/g/n
  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61580.exe

  Realtek PCIe GBE Family Controller drivers in the series

  HP ProtectSmart hard drive protection

  Realtek PCIE card reader drivers

• Boot MGR is missing on the computer pavilion laptop G6-1311sa

  I had a problem with my G6-1311sa pavilion laptop with windows 7 Home premium 64-bit, got the error message saying hard drive failed

  I contacted hp and they sent me a new HARD drive and 4 cd, 1 was a recovery cd and 3 others I do not remember what they are for, think that's also part of the recovery package.

  After replacing the old HDD with the new 1, I turned on the laptop and tested the new HARD drive and memory, they both passed.

  If I put the recovery cd and everything is fine, even got the message saying that the recovery is complete, restart

  When I restarted it I put the cd 1 of 3 in and he had 3 parts to load, to restore factory settings (I think he said that) copy the files needed for the restoration of ard drive and copy the files on hard drive, it passes through the 1st stage without problem but then sticks to 24%, whenever he tries to copy the files and gives me this message : copy files is not D:\PRELOAD\BASE19. Management of stormwater to C:\RM\image\BASE19. STORMWATER MANAGEMENT

  now, I tried 4 times with the same result.

  What should I do? Help, please

  Hello shaar100,

  Take a look at this link http://goo.gl/XQZg8

  It will take you to a thread with the steps and processes for the problem you are experiencing.

  Please let me know if this helps solve your problem.

• Computer Pavilion laptop will not turn on black screen

  Hello

  I just turned on my computer laptop pavilion dv6 (almost three years), and it does not start. Instead, I got a blackscreen.

  The capital block and the keypad lights turn on and off all the time, but I can't do anything. I can't enter the bios, the recovery or anything like that. My computer just seems to be in limbo, and I can only turn it off by pressing the power button.

  I have windows 7.

  Thank you very much for your support

  Hello cristiaan4,

  Welcome to the HP Forums! I hope you enjoy your stay.

  I understand your computer screen is blank and there are LED turn signals. I will do my best to help you, and I apologize for the delay.

  To fix this, I encourage you to please try the steps outlined in this document from HP: Troubleshooting screen displays black with no. Error Messages at startup or start-up

  This document you will help idenfying the source of the problem and can suggest many corrections. I believe that the problem can be solved by trying these steps. If this is not the case, the computer doesn't have a hardware problem. To remedy, please contact HP telephone support. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  I hope this information helps you. Please let me know your results. Thanks for posting on the HP Forums. Have a great day!

  Mario

• Pavilion laptop g7 Image Recovery file copy fails

  Material: G-7 HP laptop

  Operating system: Windows 8

  I bought a laptop Pavilion g7 in December 2012.  The 1 TB HARD disk provided with the laptop started to go bad on me.  After several attempts to "self-repair system" (which didn't) I bought a HD 1 TB Seagate SSHD replacement.  Given that I had no Windows 8 recovery disks, I contacted HP, paid for and sent them to me.

  So now I have a new SSHD, new W8 recovery discs and my laptop.  I replaced the HD and the recovery process according to the instructions of the paper that came with the disc.

  4 percent (in the "Copying files needed for the recovery of the phase of hard drive"), I get an error message:

  Reducer (the error message title)

  Copy the file fails

  From: D:/PRELOAD/votes.14. STORMWATER MANAGEMENT

  To: C:/RM/Image/votes.14. STORMWATER MANAGEMENT

  Press OK to retry.

  Obviously since I post this topic simply by pressing "OK to retry" did not work.  I turned off the laptop computer and restarted the process of recovery.  I had the same error at the same point above.

  I've read a few other BBs HP and see what people have done this experiment with various laptops, W7 and W8, posted the same question and had useful people respond by posting links and possible corrections.  I clicked on the links, but see not all what actually helps me 1) explain why I get this error message. and (2) what should I do to fix it.

  Appreciate any help anyone can provide, but please break it down Barney style as I am not a computer person.  Seriously, don't joke not on that - I'm weak in terms of technology.

  I can't understand what I'm doing wrong.

  Hello

  The first thing I want you to do is make sure the hard drive is working to do this, follow these steps;

  1 turn on the computer

  2. Select f2 for system diagnostics

  3. Select check disk hard, fast

  What is the result of this test?

  If this test passes means that it is likley to be the CD, I answered several questions like this one, where in fact the disks are corrupt so my Adviser is if your drive hard test passes contact HP and ask them to send a new set of replacement drives for unfortunately it seems problem common were disks do not work.

  James

• Pavilion laptop DV4 disk recovery installation issue what would it be?

  I formatted my HARD drive using a bootable floppy to CD (Dariks Boot and Nuke) - who has written on the C and possibly partition D (HP Recovery)... Everything went well with that.

  HP DV4-1543sb

  Original operating system was Win 7

  Laptop 2 years

  1. I then inserted the factory purchased HP disk recovery and booted from it (2 discs and 1 extra drive in the game)
  2. Installation went well with disc 1 that it then prompted me to two disc I did. Subsequently requested the extra disk I inserted.
  3. Once it is installed, it restarted the PC automatically and then start configuring Windows 7 up or at least begun to load (Win 7 was also my original OS).
  4. Process is completed and it still rebooted itself.
  5. Laptop computer loaded a little Windows (an icon appeared) and then suddenly a message saying error has occurred could not finish loading Windows)- or something of this nature
  6. Tried to reinstall and got the same scenario.
  7. Once more I formatted the HARD drive with a full format which took 2 hours.
  8. All that above was repeated with the same results.

  Any suggestions?

  The BIOS may be corrupt and if yes, how can I install a fresh BIOS with no available Windows application.

  Thank you.

  Hello

  I suggest to try the following workaround.

  If you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64 bit is the exact retail version, you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO on a CD blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key Windows located on the underside of your laptop when requested and when the installation is completeuse the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need to find from here.

  Kind regards

  DP - K

• sound does not come on the computer pavilion laptop

  I was using my computer when there was a popup for an update from hp. I've updated and then restarted the computer, but there was not his coming out. everything worked well, just noise. On the small speaker mixer microphone icon shows that he has his fate. even when I adjust the volume the ping that is supposed to be heard is not there, but it shows as green and spikes to show that there is a sound that is supposed to be there. How can I fix it?

  "Laptop HP Pavilion dm4-2191us

  Product number: QE382UA

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 8.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Computer Pavilion laptop suddenly stops.

  Computer work.  All of a sudden the screen is black, button / stop is on all the others do not. Have to stop with the button. Reset.   No other way to resart it.    HP Pavilion Windows vista laptop.

  Vicki72 wrote:

  HP pavilion dv7 Vista Microsoft Security Essentials.  No changes or software added.  Seems that since I'm the new Office Chair and plastic under Presidency happens when sometimes I touch the edge.  But if I express the touch, it happens.   It is not superheated and works fine most of the time.  Thanks for the reply

  OK if everything works before I would say that your Chair plastic causing an electrostatic discharge and it is going through your computer and causing spikes and he thinks that there is a surge and causing it to stop. You have to find a Chair not static plasic or you'll have a short-lived mobile soon. Touch the edge is a discharge electrostatic transfer into the computer and it detects more tension and stop to protect themselves. It's like walking with socks on the carpet a touch a doorknob in metal and you will allow a "Zap" is an electrostatic discharge and what id hit your laptop and it will make short work (pun intended) of you laptop.

• Computer pavilion laptop i7 incredibly slow

  Hi, I have a hp pavilion 2321ss g6 with a processor intel core i7. I had for about 2 years. It had not occurred to me to use this forum til now.

  Initially, he had run on win8, but he was almost inoperative (very slow) and I have upgraded to windows 10.

  As I installed the new computer system was incredibly slow and lazy. Opening a program, for example a browser may take more than a minute, making it unusable. Old computers are faster. I think all the updates on the system are made.

  Startup time is 300 seconds, and after that start it does not work well, on the contrary, it takes time to "warm up".

  What can I do?

  Thank you

  Lisa

  Please follow the troubleshooting and suggestions to this sticky following.

  http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/my-computer-is-running-slow/m-p/5599548#M206024

• Power on password on the computer pavilion laptop

  Help, please!

  My laptop (pavilion g4) application for administration or power on password (that I don't remember). After trying several times, it shows this message:

  System disabled: 81203610

  Thank you!

  Hello

  Try this: 34161236

  Use the posted above unlock code to access the BIOS

  Disable all passwords that are enabled

  If current password request - type the unlock code

  New password, simply press the ENTER key
  Repeat the same thing to check the password column.

  Then exit the BIOS saving & exit option to save the changes.

• Pavilion 2 10 x *: differences between models of 10 computer pavilion laptop x 2 2 - in1

  Hello

  I'm seriously considering buying a 2 in 1 laptop - HP Pavilion x 2 10 "device, but I'm confused by several different model numbers, and what mean differences. Can someone help please let me know how the following model numbers differ each other? Thanks, Lou

  HP Pavilion x 2 10-n055na

  HP Pavilion x 2 10-n005na

  HP Pavilion x 2 10-n002na

  HP Pavilion x 2 10-n102na

  Hello

  Means simply more or less options (such as the CPU, RAM, wireless card) with the same basic elements. You can see for example

  HP Pavilion x 10 2-n055na:

  http://support.HP.com/au-en/document/c04759985

  HP Pavilion x 10 2-n005na:

  http://support.HP.com/us-en/document/c04763428

  Kind regards.

• Why my computer pavilion laptop, it starts and seconds later, just stops

  Im working on a pavilion entertainment pc and when I go to boot it it stays on for a brief second then stops I was wondering why its done this for as far as I know nobody has never opened to make adjustments

  Hey Sonny.

  There are a ton of questions that could cause this. The most common is a failing hard drive or it overheats. Since its only on a brief second I would try a hard reset, followed by the disk hard self-test.

  Perform a hard disk of that test
  Hard reset your laptop

  I would like to know if one of these help.

  Thank you
  Sean

• Computer pavilion laptop G6 - printer does not print

  I have laptop which is wireless and my other computer is on my desk and is connected via a cable internet through the router.   On my desktop, the printer indicates very well, loan and work and I can print, but the laptop says printer offline.   I have checked all cables, etc., but don't know how to get to the printer.

  Hello

  Please contact the Microsoft Community.

  I would have you try the doctor print from here.

  See also article-

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• drivers for computer pavilion laptop 15 PC 15-n040sx

  I installed Windows 8 Pro on my "Pavilion 15 laptop PC 15-n040sx" and was able to block all the drivers, but one.  Can you help me to find it

  Cockpit: SM Bus controller

  Hardware ID:

  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2166103C & REV_04

  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2166103C

  PCI\VEN_8086 & DEV_9C22 & CC_0C0500

  PCI\VEN_8086 & DEV_9C22 & CC_0C05

  Hello:

  You must install the driver from the Intel chipset from the link below.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng