Auto update turned on by itself and updated my computer without authorization

Similar Questions

• BlackBerry 8350i smartphones turns off By itself and back!

  OK, I have an 8350i by Nextel. A couple of weeks my BB itself off and turned and then turn the. I don't think much of it until he started to happen very frequently. When I say often, I hear every 10 minutes. Pretty frustrating for a phone that I use for work. I took it to a local service, but they didn't know what was going on so they simply slipped the software and reloaded it. This solves the problem for about 24 hours, and then she went back. There has been sporadic with about one day between each of them, but it has since become a very common question again. It happens about 5 times a day I know. It's embarrassing and I hope someone can help. Thank you in advance!

  I am running Version 4.6.1.313.

  If you are still under warranty, you should try to have it replaced by your carrier

• Why my WIFI on my computer turns off by itself and won't turn it on?

  I have a Dell Inspiron e1505 with windows XP home. My internet works fine. I have the latest drivers for my computer. But my WI - FI goes off without reason and won't turn on, so I have to restart the computer. When this produces the sound on my computer also starts to act "weird." I begin to hear a crackling sound or the sound stops, but not all the time... just to milliseconds. I have re-installed the driver for audio that came on a CD, but the problem occurs again when the wi - fi goes out of himself. Help, please! I don't know what to do!

  Hello

  · What is the service pack installed?

  · You have security software installed?

  Try the methods below:

  Method 1:

  Follow the steps from the link below: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  Method 2:

  Download the troubleshooter from the link below and run the same thing and check if this may help; Troubleshooting Microsoft Windows XP-based networks wireless in small businesses or individuals: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=35c7e5ad-59e7-477b-9d27-6a7030e67002&displaylang=en

  Method 3:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• have I not a ghost? PC turned off by itself and restarts when playing flash games...

  Hi, have a hp dc 7700 with a DC 7700 SFF USDT Board in it, 4 gig of ram, 750 GB HD, xp pro, 32-bit, windows just recently began to shut down the pc and restart on its own only when playing farmville, (flash game)... really weird... what I did > I did a full virus scan with advest & malware a few threats found and deleted, has done a chkdsk on it, performed a restore to an earlier date, have always the same problem... ran JRT and no threat not found, has anyone seen this before?  other that farmville, there is no other problems with it, my other dc7700 cmt have no problem when you farmville... duty to solve this problem, the pc of the wife...

  old_geekster wrote:

  Boatmoter, welcome to the forum.

  Have you checked to see if the computer is overheating all in game.  Games is intense and can cause a heat.  This can certainly cause the computer to reboot unexpectedly.  There are many FREE programs that you can use to check the time.

  Thanks for the tip I will load CPUZ and check the temperature which would be the specs of temp on this one

  old_geekster wrote:

  Boatmoter, welcome to the forum.

  Have you checked to see if the computer is overheating all in game.  Games is intense and can cause a heat.  This can certainly cause the computer to reboot unexpectedly.  There are many FREE programs that you can use to check the time.

• Downloaded SP3 of XP on a USB to update XP computer without internet connection, computer, failed to read the iso file?

  I downloaded the SP3 of XP on a USB to update an XP computer that is not connected to the internet.  The computer cannot read the file, any suggestions on a download that will help you... the file is a. ISO file

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  It is an executable file (.exe) that must just run and install, i.e., it is not an iso file that will be used to create a CD which included the executable.

  Just like the iso file, it can be saved to a Flash DRIVE on another PC before running on the PC to update.

  So try and get up-to-date with the Windows updates.

  Tricky

• I forgot the password to my old computer admin, and he has 1 account to it. What can I do to cross it and unlock my computer without drop kick to it through my 3rd floor balcony window lmao.

  Although even I have now a new computer, still I'd like having my old 1 as a back-up if this 1 crashes ever, there is only 1 account on it and I forgot the password of admin for it. I tried to restart it in safe mode if all goes well to bypass the password admin start-up section, but surprise! always had a password and when I type the password reset link under the password box that he told me that I need a password reset disk where can I get 1 of them and I can get very cheap 1 because I am disabled and cannot work more:(si im limité sur combien dépenser chaque mois.) It also requires a USB and not a disc, the brand and the model is an Acer Aspire 5610 with windows vista home premium.

  Hello DOWG pepper,.

  Unfortunately Microsoft forbids us to give instructions on how to work around/hack admin password. There are ways, but we are not allowed to disclose. As this is an old PC, maybe the best thing for you to do is re - install windows on this computer.

  On the reset disk, you will need to create one of these yourself by opening the control panel and clcikcing on user account icon. In user accounts, look to the left of the window and you will see a list of tasks. The first is create a reset disk.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows 7 - CAPI2 and root certificates auto update (error 4107)

  Hi - I get this error as well (full text below) - I searched for all possible combinations of words to try to find and answer this question - I turned CAPI2 loging but the results help really - I have tried almost every fix listed but with no improvement.

  The heart of the problem I see is that Microsoft has released a file damaged or unusable .stl otherwise - and nobody seems to be willing to give a clear answer as to what to do on this subject - confusing, CAPI2 error is that the certificate is outside its period of validity, however, if indeed, you download and extract it file the given error is that the certificate used to sign the .stl file is not valid for the requested use - that is MS as the timestamps look right to me!

  For the record, I'm under Windows 7 Enterprise 32-bit with IE8

  See you soon

  James

  Log name: Application
  Source: Microsoft-Windows-CAPI2
  Date: 2010-10-08 11:14:03
  Event ID: 4107
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: # removed #.

  Description:
  Has not taken from the root list third-party auto update cab at: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: a required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
  .
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      4107
      0
      2
      0
      0
      0 x 8080000000000000
     
      27923
     
     
      Application
      # removed #.
     
   
   
      http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab
      A required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
  
   
  

  See...

  Event ID 4107 or 11 is logged in the application log in Windows Vista or Windows Server 2008 and later (26 August 2010)
  http://support.Microsoft.com/kb/2328240

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my windows update Auto setting turns off suddenly. message says "administrator disabled the auto update". I have the admin account, I has not extinguished. I can't install vista sp2 KB98465 pack, update error code 800F0900. Help, please.

  Ideas:

  • Vista
  • This problem occurred after avast is flaggeg error last dec 4 2009
  • I tried to reset the windows update components, but it did not work.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi Agnes Vizcarra,.

  Thank you for visiting Microsoft Answers.

   

  ·         Which version of Windows Vista is installed on your computer?

  ·         Remember to make changes recently?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  ·         Group Policy

  ·         System policy

  ·         Registry

  Method 1

  Try to turn on the auto update by following the steps in the link below:

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Method 2

  If you have any security software installed, disable temporarily.

  Method 3

  Download and install the stand-alone package for the Service Pack 2 from the link below:

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Method 4

  Run a virus scan because it causes sometimes caused by viruses.

  Microsoft Security Essential

  http://www.Microsoft.com/Security_Essentials/

  Link to view:

  Learn how to install Windows Vista Service Pack 2

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  http://support.Microsoft.com/kb/948465

  Hope the helps of information. Please post back and we do know.

  Joel S.

• How to install a driver after you turn off the auto-update

  I disabled auto-update Windows Update drivers by following the instructions in the following article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/disable-auto-install-drivers/61d02eb2-C131-44BF-b743-d614f0189cf2?TM=1347039132644
  It was due to the update of Windows Installer drivers on top of my existing bluetooth drivers and prevent the unit to work. I had to reinstall Windows to solve this, UN-installing then the installation of the Dell printer drivers did not work.
  I just bought a Freecom 2 to drive that connects via eSATA. Unfortunately, the instructions say that I don't need to install drivers because Windows will do it automatically! Ugh.
  I am reluctant to turn to the auto-update as it will probably destroy bluetooth again. So the question is: How can I install Freecom drivers and the problem of bluetooth do not breed take the risk?
  Note: Looking at the dialog box "want you Windows to download the driver software? ' there is an option to" install the driver software from Windows Update if it does not appear on my computer.
  Well well... driver Dell bluetooth software is on my computer (the software to install, it is on my C: drive and it is also installed) so not preventing him to get the version of Windows Update? I am concerned about the confidence that, given that the driver has been installed also the last time he downloaded the MS driver (although the auto-update feature was turned on at that time here). I'm afraid to think that the Dell driver's oldest (who is) and so he gets crushed.
  Thanks in advance.

  "the fact that the manual says that he needs a driver to be"automatically installed by the operating system"suggests that... he needs Windows Update."

  (1) while I don't have an external HARD drive in a box I have a case of a slot for external e-SATA replaceable hot which is about the same as a commercial external HDD, but without the box.
  When I plug in a HARD drive into the slot in Windows automatically detects the drive.
  Windows should automatically install the drivers for basic/generic for most of the devices when it detects something new just to be attached/connected. Once Windows did, this 'device' must be posted from there on.
  This is not the same thing as let the Windows updates to install the drivers.

  So, when you plug in the external hard drive on e-SATA port, the first time Windows pops up a similar message to-"new device detected... the driver installation, you can check if the device is detected and drivers are installed by going to computer management > Device Manager to see if your external HARD drive is on the list of hard drives."
  If non - R / click on hard drives and click "search physical changes.
  There is also an option here to update the drivers.

  You are quite correct disable optional updates.
  It is not a recommended option, especially for the graphics drivers and chipset.
  Personally, if the mfg of the material provides drivers on their website always download and install the drivers manually.
  As a result of that it is prudent to updated Windows configuration only updates are available so you can choose which you want to install and choose to install it on your own time inform.
  This way you can close applications and browsers and better to avoid the possibility of corruption updated leaving the priority update. It is also
  more course with a clean install of Windows to start with sp1, and then do the other updates in small batches.

  2. when the HARD drive is connected and recognized in the Device Manager are moving
  for the computer management > disk management. This shows the good
  for HARD drive capacity?
  If the HARD drive has only a small partition and unallocated space that is perhaps why only a small capacity is shown elsewhere.  You can format the HARD drive and
  create a new Partition or Partitions here.

  "b if I uninstall/remove device, then as soon as I tried to install the driver from the manufacturer it seemed to install ok, but... still bluetooth didn't work." It simply detects all devices everything I tried. »

  Have you tried the fix .NET? .NET can be damaged and should be
  updated in all cases.
  It's been awhile, so I don't remember why (safety improvement?) but I uninstalled .NET and reinstalled with. NET4.
  DOWNLOAD: Microsoft .NET Framework 4 (Web Installer) - Microsoft Download Center - Download details

  .

• Firefox worked FINE yesterday and it auto-updated and now whenever I load the Web site, it crashes immediately, even in safe mode. Help please?

  I tried the following-
  refreshed Firefox
  uninstalled/reinstalled firefox
  safe mode
  removed the malwarebytes program due to work for someone else
  has ran my spyware, zero results returned

  Chrome works very well. Everything else is fine. Firefox had no problem until it auto update last night. I can't submit a crash report because every time he asks me I say Yes and then he tells me 'problem presentation report '.

  This looks like a problem with the NVIDIA Network Access Manager.

  • BP-db6d3841-B1A5-49B3-b0bf-4bdac2151222

  There is a version of Firefox 43.0.2 planned to block this NVIDIA driver, you can try to install through this site:

  • http://download.CDN.Mozilla.NET/pub/Firefox/releases/43.0.2/Win32/en-us/

  Otherwise, you can check the control panel so you can find "NVIDIA Network Access Manager" or "NVIDIA ForceWare Network Manager" and uninstall this software.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not...

  My iphone will not suddenly be updated to icloud photos?  It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc...  can anyone help?  well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...

  Have you tried the signature to iCloud and then reconnect?

  Try a reset.

  Reset device

• Different auto update for Vista and Windows 7

  Computer my wife, Firefox under Windows Vista, has been updated this week to Firefox 7.0. Mine, Firefox running on Windows 7, however remains to 6.02. When I pull down help / about it says "Firefox 6.0.2 is up-to-date." I know that I could download 7.0 manually and install it, but I wonder why Auto-Update didn't get it. Two of us are on the output channel.

  Updates to Firefox 7 were off early yesterday due to a bug related to disappear during the update of modules.

  http://blog.Mozilla.com/addons/2011/09/28/issue-discovered-with-Firefox-Add-on-upgrades/

  A Firefox version 7.0.1 for this problem should be available shortly.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.