Will be the version of windows 7 support autocad 2005 or 2006. If this is not the case, what steps are necessary to support the software. Engineering students will be difficult if windows 7 does support autocad 2005 or 2006
HI prakash sundar
Check the latest version of Autocad is available may 2010/11, or you can use 2009 fact.
try to run autocad 2006 in compatibility mode.
Right-click on the Setup<>
Run it from XP or vista. Click ok and check the issue.
I was trying to Visual Basic 2005 Express edition. It stops in the middle and gives me an error message: Visual Studio 2005 has a compatibility problem known with this version of Windows. And the Solution online is given as to install "Visual Studio 2005 SP1" and "Visual Studio 2005 SP1 update for Windows Vista and Windows 7". I could still run the installation and fill it. But when I start the Visual Basic Express Edition the above error message is copied.
When I tried to install above two 'VS80sp1-KB926601-X 86 - ENU' and "VS80sp1-KB932232 - X 86 - ENU", I get the error message "the upgrade patch cannot be installed by the windows service install because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program." Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. »
Anyhelp that will solve my problems above is greatly appreciated.
Thank you in anticipation - Kalyani Ch
Hi Katou Ch,
Thank you for visiting the Microsoft answers community site. The question you have posted is related to Visual Basic and would be better suited to the Discussion Visual Basic groups. Please visit the link below to find a community that will provide the support you want.
I would say that this last two updates. latest Firefox version 32.0 have a compatibility issue with Windows 8.1. My laptop newly bought worked fine with Firefox until recently. About two to three days before, during the navigation. blackheads should blink on the screen. At first, I figured well problem of pixel, but after testing the same sites with IE 11, these black glitter points seemed not at all. I tested it with chrome and no points. These black spots have not appeared before on Firefox, only recently. Unfortunately, I'm very uncomfortable with the use of Firefox that I had been using this browser since 2005, but this compatibility issue makes it difficult, cause flickering points can be annoying.
What you describe was reported before and it is almost always bound by graphics drivers. Firefox will (by default) use hardware acceleration to help speed up the rendering etc. On some graphics cards/driver combinations (most with Intel video) people reported black dots. Disabling the hardware acceleration option usually clears this up.
It is not limited to Win8.1 - were reported on both Linux and workaround there is to change the method of hardware acceleration... until the Intel video driver has been updated.
Just bought an Equium M50-164 and I have problems to open Microsoft Publisher files.
Generally, the computer is very fast compared to my old one but takes forever to open a file in Microsoft Publisher. Even when it does not open it opens all the tables that were created on the file.
I have Microsoft Office, Autocad 2005 and Microsoft installed Highway also. They seem to work fine.
Concerning
Hello
Well, it's not easy to say why it starts slowly. Slow performance can be a very difficult problem to diagnose because there are many causes of the slow performance. More in my knowledge Microsoft programs (IE. Editor, office, etc.) are very complicated software tools and it s is not easy to say which and how much process is running in the context of the BONE. I recommend you to search on the Microsoft Web sites for useful information. You can also check this link:
My daughter has been blocked since her Hotmail account. A few weeks ago, she tried to log into his account and she received a message saying that Microsoft believes that someone is using my account and she had to verify his identity. The problem is that the questions on the form are questions she can answer because she had the account for so long and don't remember not much information she gave when she first set up the account. It responds as fully and completely as possible, but she keeps a reply back that there is not enough information. We found a site where we could email and talk to the people at Microsoft. They informed us that they will not take phone calls home to check who's daughter. My daughter and I have provided a list of more than 25 emails received in this account, which must still be in the Inbox. One of these emails came from the law, let him know that his test results was ready and it has not been received into that account up to December 23 and has not been opened because he was sent at the time that his account has been blocked. Absolutely no one would know she was expecting that email if they were not him. They still won't give her access to his account. We are desperately seeking advice that anyone here can give us. It has submitted applications for college and scholarships all registrations than e-mail. She is currently taking classes in college for dual credit and receives all its information from there to this e-mail. She only uses email for important communications about the school, but the places she submitted as email to are just to many for us to save and to give a new e-mail address. Somebody, please help us!
We cannot help you, we are just members of the public just like you. However, I can tell you what helped me many years ago
It was around 2005 or 2006, I remember exactly. I fell for a phishing attack - I've been tirkced by typing my password into a fake website which looked like Microsoft, but was a fake. They used to access my account, buy a ton of Xbox games and more. I reported it, and Microsoft quickly locked the account because he had been the subject of fraud. They me refund all the money, but never unblocked the account. Then when they did, they foolishly sent me confirmation of it on the account has been locked. It was like saying "hey, we have your car to the shop, and we locked ékes inside you th.". Grrr.
They could not be made to understand that I could not access the account as they were telling me that my password was. I tried for days to explain this concept. I ended up having to open a complaint with the Better Business Bureau, which could get him degenerate and finally find someone with an idea to call me.
What is the size of disk hard max 1 HD in T40? lenove support, there are two pages related this topic, and one is 100 G (100G hard drive compatible with t40)
If I got a HD 100 G from a friend, can I use it in T40?
However if I can get an SSD probably will be better. Wonder if the system was installed on the SSD, hides and writes a temporary file slowly destroy?
These two articles are quite old (2005 and 2006) so I don't know why these said 80 to 100 GB is because it's the size of HARD drive that was available in 2005/2006 and information may not be current. I think that the 100 GB should work with a T40 if one ATA the T40 with no SATA.
There are also some Thinkpads that have a white list in the BIOS, so it will not start if you insert a HARD disk that is not in the whitelist (take a look at the link below). The T40 is not here, but I don't know whether or not T40 have such an authorization for the HARD drive. If there is no white list in the BIOS to the T40 any ATA drive should work in theory.
I'm not sure if the T40 will benefit many a SSD and don't know if there is any SSD with ATA. I've seen that SATA SSD. Also I don't know if I would spend so much money on an upgrade for such an old computer even if an ATA SSD is available. When you buy a new laptop it is SATA and ATA HDD/SSD will not fit. I recommend instead to consider a SSD later when you decide to buy a new computer. In normal use a quality SSD should work properly for many years with cache, temporary files, paging files and so on. The problem of wear SSD level is a bit overrated.
If you have a friend with a 100 GB ATA HDD, I suggest that you take the HARD drive and see if works or not. You can also wait for more answers and someone might have more info on this HARD drive you can and cannot use the T40.
I am install Win XP on my old Presario V2000. Everything went well, but I can't find the video driver. Windows Update does nothing and neither do your own support. Some pay $ 10 sites offer something, but I'm not paying anything. So, I need video driver for following V2000:
Compaq Presario V2000
AMD Turion (TM) 64 Mobile ML-28 technology
512 MB of memory
2005 or 2006 model
Video has 128 MB of RAM. Driver must support the widescreen resolution.
I will dig more information if you need that. Thank you!
Hyvaa huomenta, Joni:
Based on the hardware ID will keep you, here is the link for the video driver you need.
I bought Windows 7 Professional, because my children have games that need XP to run. I have dl'ed and installed XP Mode and Virtual PC, install Zoo Tycoon 2 for my son and I don't get a video memory error message. If I get this error message when you try to run Zoo Tycoon 2, how in the world can I run AutoCAD 2005? Microsoft sell us a bunch of lies? After reading some interesting articles on XP Mode, I now discover that my anti-virus provides me with even coverage in XP Mode.
Can someone give me some concrete answers as to why I need the XP Mode and how do I make it work?
XP mode must be treated as a completely separate machine. Think of it as a network computer.
He needs his own security software, updates and general maintenance.
I'm using a field of quick dashboard: 'Back', where I selected the year.
I need to find a valid contract, for example when I choose year 2001 Obiee find anything now.
What kind of formula or a function that I had to use, when I choose the year 2001 then I should get result provider, because in the supplier of the year contract has valid (between 2000-2006)?
Hello
The fast option is to use variables of the presentation.
In the prompt of the year create a variable presentation (named for example SelectedYear), then in the analysis, that the filter must be:
Start the new year > = @{SelectedYear} AND end of year<=>=>
x_parents - will be a record for each element that is a parent.
x_children - will have a record for each element that is a child.
(a) the hierarchy can be up to 6 levels (including the root and leaf)
(b) same point can be a parent, but also children if it is in the middle of the hierarchy.
(c) the same point can be parent to 1 or more child items (different hierarchies)
(d) the same point can be child for 1 or more elements of parents (different hierarchies)
Data presented in these tables similar to below.
x_parents:
---------------
Link ID
Item ID
100
2002
101
A2003
102
A2004
103
TO 2006
104
TO 2006
x_children:
----------------
Link ID
Item ID
100
A2001
101
2002
102
2005
103
2005
104
A2099
These data are the representation of 4 (Parent-> child) hierarchies:
1.-> -> 2002A2001 A2003
2. A2004-> 2005
3. to 2006->2005
4 to 2006-> A2099
Now, I need a such SQL query in passing the id of the element, it should be able to return all of its parent element and child ID. For example, from 2002, I should be able to get A2001 & A2003 and similarly, from 2005, I should be able to get both A2004 & to 2006.
Help please... !
And for an item_id provided...
SQL > ed A written file afiedt.buf
1 with normal (select 100 as link_id, "2002" like item_id from dual union all 2. Select 101, 'A2003' from dual union all 3. Select 102, "A2004' from dual union all 4. Select 103, to ' 2006' from dual union all 5. Select 104, to "2006" of the double) 6, ch (select 100 as link_id, "A2001" like item_id from dual union all 7. Select 101, '2002' from dual union all 8. Select 102, '2005' from dual union all 9. Select 103, '2005' from dual union all 10. Select 104, "A2099' from dual) 11- 12. end of test data 13- 14 select connect_by_root (par.item_id) | SYS_CONNECT_BY_PATH (ch.item_id, '->') as yesterday 15 of nominal Join the 16 ch on (par.link_id = ch.link_id) 17 where connect_by_isleaf = 1 18 and "& id" in (par.item_id, ch.item_id) 19 connect by prior ch.item_id = par.item_id 20 * start with par.item_id in (select item_id rated less select item_id of ch) SQL > /.
Enter the value for the id: 2002 18 old: and "& id" in (par.item_id, ch.item_id) 18 new: and "2002" in (par.item_id, ch.item_id)
Not sure what the best way to Word this, but that's. I wonder if there is a comparable feature in After Effects to what Nuke called the "showcase" and the data window". I will do my best to explain my problem. I'm jumping backwards between After Effects and Nuke. I used After Effects extensively since version 6.5 to 2005 or 2006. I've been tinkering with Nuke for years now, but now I'm determined to get competent in it. One of the features I noticed Nuke who seems to be lacking in After Effects is the "bounding box/display window" that appears as a white dotted line around an image in the display window.
Right now I'm working on a show that is My.cnf anamorphic linear exr with a deliverable 2158 x 2272 resolution. There is a pixel 233 pad/mat up and down so that the image is actually 2158 x 1806. If I open one of these files/shots in Nuke, I get the picture, 2158 x 1806 in the display window with a blank line dotted around her, within the metadata of the node, Nuke reading tab called the "exr/data window. It's floating in a sturdy white box that defines the full resolution of the photo (2158 x 2272), which includes 233 pixel black padding up and down. The anamorphic 2:1 ' squeeze' automatically' corresponds to the image in the display window 2158 x 1806 and remaining leaves 466 pixels up and down black and calls this overview read full resolution the "showcase" in the metadata tab of the node. Nuke reads metadata exr and performs the anamorphic compression.
If I open the same file in after effects CC, it cannot read the exr metadata so it does not apply a squeeze anamorphic and it stretches the image of 2158 x 1806 to fit the area of 2158 x 2272 complete resolution. I have to shrink the image to 79.5% on the Y axis to get it's good aspect ratio. After effects 2014 and 2015 WILL read the metadata and do the squeeze automatically, BUT when you return, he makes the black bars on the top and the bottom, Cook in the file. If this file is read Nuke, it opens fine but it will no longer be a data window around the image because the entire image is defined by both the 2158 x 1806 and 466 pixels of padding. If I turn of Nuke, it does NOT the black padding but stretches the image 2158 x 1806 in the "data window" to mount a 2158 x 2272, defined as the size of the file "window" that gets pressed again to a 2:1 ratio when it is read in Nuke.
It's exhausting to write so I would be surprised if anyone makes it all through in this. Since I have to do, I'll leave this here, in the hope, I gave enough information for someone to recognize this situation. I hope I'm missing something for After Effects to read and write these files in the same way Nuke. I am new to the exr world. I have always used the DPXs in the NEWSPAPER. In order to work with linear files above them in EXRs is kinda weird too. Thanks for reading if make you throughout this, I hope that he has no sense at all.
With version 1.9, the plugin EXR changed its treatment of displayWindow. He used to ignore it, but now it crops the displayWindow throughout. Most people prefer this, but you can be the exception. Fortunately, there is a way to restore the old behavior with the instructions in this message.
AE does not have this notion of dataWindow/displayWindow together, so there is no way to make an EXR this way. I suggest to make the buffer full off-AE, then perform an adjustment in Nuke to re - define the displayWindow. There is also the EXR command-line tools that can do.
If an EXR file has a pixel aspect ratio other than 1.0 (square), which should be reflected in AE. If it wasn't for some reason, you should always be able to enforce in interpreting the film.
I need help creating a fake site. Everything I want is when the user clicks on the button submit to a text box below the submit button or a message box pops up saying: "Please fill in all information." or "an email has been sent.
The email is not real, no e-mail will be sent to the person entering the details.
If the user does not have all the information, I would like information for stay and the message box, or the text to appear.
If the user has put all the information, I want the message or text box to appear, but information disappear as the form was reset.
Someone at - it a solution?
Someone who knows how to code the buttons to do the other sections of the page appear, or become visible.
Here is the code for the form... now you need to copy and paste it instead of what you already have, which is configured incorrectly.
$(document).ready(function() {
$('.formError').hide();
// check form fields
$('#submit').click(function()
{
var txtName = $('#txtName').val();
var txtEmail = $('#txtEmail').val();
var txtAddressStreet = $('#txtAddressStreet').val();
var txtAddressSuburb = $('#txtAddressSuburb').val();
Hello I want Windows 8.1 Enterprise 64-bit driver for HP Pavilion dv6-6c50se please hurry Sorry my bad English If not replay and give me any driver, I'm not suggestion bar to buy HP...
sick it don't let me not inportant update and no competitor updates, tried to do one at a time does not yet Download exe mpam-fe still does not not, and just do a full scan to treat a suspicious malware and not yet updated, one obtained any more idea
We use D1IM Version 6.1.3. If we open the object browser, you open a user account object AD ADSAccount table, we cannot see the value of this object in the attribute "displayNamePrintable. If we develop this attribute in the line 'New' and 'Old' is w
I have a single 7009 with double Sup - 2 running 6.1 (3) for a replacement of the base, the modules include a N7K-M148GT - 11 L and two modules N7K-F248XP-25. I'm looking to create several committees and will finally connect my DR via OTV site using