automate the insertion of notes

Similar Questions

• Undo the insert does not properly - Popup

  Friends
  
  To speak frankly fed up with Oracle ADF (Newbie .net was much easier)
  
  I have a use case for the edition of Masters details... Details are displayed in the table... For detail edit and create operation I use popup with the Control Panel window.
  
  My problem.
  
  I used a managed bean and operation of 'Create' to add new lines of appeal. Works well, but when I cancel my code does not work, I still see a blank line in the table of means...
  
  
  I get the rwStatusfrom method AM to check the status of the line. Please see the code.
  
  
  If (NEW".equalsIgnoreCase (rwStatus)) {" "}
  
  
  RW. Refresh(Row.REFRESH_UNDO_CHANGES |) Row.REFRESH_REMOVE_NEW_ROWS);
  
  
  }
  on the other
  {
  RW. Refresh (Row.REFRESH_UNDO_CHANGES);
  
  }
  
  
  If I add dtIter.getViewObject () .clearCache (); the code above Houston line concurrency exception is thrown, but new line is deleted.
  
  I even regenerated my table... No use.
  
  
  
  At the beginning I used "CreateInsert" for the insert operation and it was much easier remove the line but the question during the insertion of the first record my validation was immediately called in the showPopup (before adding data) so I tried the "Create" operation.
  
  
  Advice me please. I'm in the third day with this problem. (Creation of Bothe and CreateInsert works perfectly well in a form (view) but only question in popup).
  
  Thank you
  
  Published by: KK_Ash on May 26, 2013 08:13

  Hello

  in fact + "to speak frankly fed up with Oracle ADF (Newbie .net was much easier)" + "

  is a very very very bad start for a question of aid - honestly. Its never a good idea to disrupt a forum before asking for their time to solve your problem. To delete the line of the display, you must remove the link layer and not in the morning (which should get updated automatically). Then in the dialog box change the logic to cancel it if you access the current row of the iterator

    BindingContext bctx = BindingContext.getCurrent();
    BindingContainer bindings = bctx.getCurrentBindingsEntry();
    DCIteratorBinding iter = (DCIteratorBinding ) bindings.get("iterator name");
    iter.getCurrentRow().remove();
  

  See for how to handle the OK/Cancel button in a dialog box: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/77-ok-cancel-support-in-dialog-351871.pdf

  (which is basically your use case)

  Frank

• is it possible to automate the insertion?

  Hello
  Suppose I have two tables as follows:
  
  SQL > create table t3
  (a key primary number,)
  b the number,
  c number);
  
  Table created
  
  SQL > create table t4
  (number of d,
  the number e,
  f number);
  
  Table created.
  
  Now, my question is that, is it possible that when I insert values into the table t3, values in the column a of table t3 also automatically gets entered in column d. table t4?

  user12222356 wrote:

  Now, my question is that, is it possible that when I insert values into the table t3, values in the column a of table t3 also automatically gets entered in column d. table t4?

  And what needs to be inserted in columns e and f? I'll assume NULL:

  CREATE OR REPLACE
    TRIGGER t2_air
      AFTER INSERT
      ON t3
      FOR EACH ROW
      BEGIN
          INSERT INTO t4(d) VALUES(:new.a);
  END;
  /
  

  SY.

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• 'Lines' of the table does not automatically extend as added content?

  This is a table of Storyboard, built with a simple table.  Three columns: one for the images, one as a spacer, a text.

  I did the storyboard to the origin in the Pages, and then converted in Word to work with a partner, now converted to Pages yet.  It seems to be OK except for one thing:

  Before, when I would write in the text of the text column... the line would extend automatically as the text was written, at least in the size of a page.

  Now, I think lines are somehow "locked" and does not (at least one page), extend this text and images, are "hiding" because the line is not normally develop as she would have.

  Is there some click preferably a place that keeps my lines to a constant size, any content is in every cell?

  Or maybe it's a corruption caused by going to Word and back?

  All ears,

  Ben

  V4.3 Pages ' 09, or permit Pages v5.6.2 splitting a line beyond the limits of the page, so limit the content of text in a cell a to a single page. I just copy and paste a page full of text and he dropped in the first row, cell 3. It is automatically extended to the bottom of the page and not details. There is no hidden settings in Pages that will be substituted for this limitation.

• the disk you inserted was not readable by this computer

  "the disk you inserted is not readable by this computer" appears time to another, even if no disc is loaded...

  That I can not print, but after restart ok, but later it pop! My iMac has OS X El Capitan version 10.11.4.

  Can you help me with a user very amateur?

  Reset the SMC and LANDAU according to the iMac Intel SCM and reset the PRAM.  If the problem persists then if it please post a report EtreCheck on your system, and we can look for obvious problems. To publish the report, click on the link, download the application and run the report. Then copy and paste the report in your reply to this message.

• Is it possible to automatically check all bookmarks, then remove the works do not bookmarks

  Is it possible to check automatic all bookmarks and remove the works do not bookmarks

  Try this extension:

  • CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• iMac G3 Tiger Installation "the disk you inserted is not readable by this computer.

  Hello

  I try to install Mac OS X Tiger on my iMac G3 slot loading 400mH. The system is compatible all I checked before installing. I was able to start on the first disc very well. It is installed properly, until he asked for disc 2. When I put in the disc, it turns a little, and then do absolutely nothing. It just sits there even ask for the disc. After having let it run all night, I decided that the only option was to hold the power button. When I turned the machine back on, it gave me the error "the disk you inserted is not readable by this computer. He then ejected the disc.

  What are my options?

  One thing I forgot to mention, is that I have created these disks under windows with a program called TransMac. It was the first program that I found which could create for Mac bootable discs. The fact that he created the first a perfectly fine leads me to believe that it is not my Windows and Mac computer. I could be completely wrong, and if so what is a better program. I am not of any other Mac other than the G3.

  Thanks in advance!

  Other specifications:

  iMac G3

  400mH

  256 GB RAM

  120 GB disk with Mac OS 9 and OS X Panther (I'm trying to update for Panther)

  Historically, the Mac have trouble starting from system disks burned. As you say, the first one worked, so you might be on the right track. Have you tried to make a new second drive from the same program? Maybe there is a media problem or an engraving error.

  The other problem could be the source of installation of Tiger. Apple has distributed never freely as each copy that you find on the internet - free or paid - are pirated and may even be compromised. It happened more than you think. There are a lot of reports of people for an OSX version here as an internet download and even pay for it, only to find that it works at all. I've seen downloads Mac OS offered for sale even on sites like eBay (I point out them).

  So this begs the following question - where did you Tiger?

  If we get that worked, we ned to continue what I have some experiences with Panther and Tiger on the iMac of the same model which can be useful

• Why can't I insert 16 notes on the score?

  I am a piano song that has some quick parts in it. I use the score editor to compose because I want the sheet. I can't insert 16 notes (notes with 3 'bars' on top) in the score editor. I can't insert any any point which is "faster" that an 8th note. It's really frustrating... Could someone help me?

  Those who would be 32nd notes.  You must make sure that your Score of quantification display is set to 32... See below...

  

• Creating discs of recovery, says "the disk you inserted is not empty", but it is empty

  Windows Vista Home Premium, SP2. HP G60 laptop.

  I (finally) created recovery disks. When I insert a DVD - RW disc, I get an error message: "the disk you inserted is not empty. But it is empty. I tried to use disks formatted and unformatted, but no luck. What to do next? I don't want to try CD, because it'll take 17 of them (against 3 DVDs).

  Thank you

  Hello:

  You might want to try a DVD-R or DVD + R vice a DVD - RW.

  Paul

• the disk you inserted is not called by this computer

  Whenever I start the computer, it starts flashing on the screen "the disk you inserted was not called by this computer.

  When I booted into it, it shows me the Macintosh HD. I activated the 'first aid' keys and able to diagnose and the result was ok.

  Is - it my Fusion drive is causing the problem?

  Mr. Chua

  Mr. Chua,

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

• Insert in the table does not

  My version of LV: 8.6 developer suite x 86

  Hi all

  It seems the "insert table" according to VI would not work when one or more entry points are empty.  Is there a way to get around this?  From a conceptual point of view, it's a very simple thing that I don't know how people OR might have missed it.  There must be a way around this problem. Any suggestion?

  Right click the Array function to build and select CONCATENATE entries option.

• using Xp the sd popup does not work on the insertion of the sd chip into the slot, how can it be repaired?

  normally on the insertion of the sd chip a pop-up dialog box appears asking what route you want that information to sd etc. This pop up does not work and the only way I can get into the sd information is to search on D:, then click on 'Open' please notify if MS can restore the pop up facillity?

  Hi JohnWack,

  Welcome to the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  According to the description of the problem, I understand that you do not get the AutoPlay option when you insert the SD chip into the Windows XP computer.

  -What do you mean by "what route you want to than the sd information etc."? Are you referring to the auto play feature?

  Try these methods.

  Method 1

  Double-click on "My Computer", right-click on the drive you want to Auto play and click 'properties '.

  Click the 'Auto play '.

  Method 2

  Steps to enable AutoPlay.

  1. start, click run, type Gpedit.msc in the Open box, and then click OK.
  2. under Computer Configuration, expand models of administration and then click System.
  3. in the settings pane, do a right click Enable Autoplay, and then click Properties.

  For your reference.

  Windows XP does not recognize a secure digital card when you reinsert it after you remove it
  http://support.Microsoft.com/kb/812661

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.