Automate the installation (runInstaller send me questions in the script)...

Similar Questions

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• How to get the shortcut to exe on deskto automatically after installation?

  Can someone tell me how to get the shortcut to exe on deskto automatically after installation?

  Kind regards

  Vijtin

  Look at this link

• Send the default settings and the server - you want to configure my MSN so that it can automatically appear when I send invoices

  try to put my server and other information on my email windows or even if I put my msn, so it can automatically appear when I send invoices.

  I want to send invoices and when I click on send it comes up with windows mail, and I want to come with msn email how to fix this

  Thank you

  try to put my server and other information on my email windows or even if I put my msn, so it can automatically appear when I send invoices.

  I want to send invoices and when I click on send it comes up with windows mail, and I want to come with msn email how to fix this

  Thank you

  Try MSN customer service:

  http://support.Microsoft.com/kb/940784
  Link includes... Information and support services options MSN to the benefit of others looking for answers, please check the suggestion as answer if it solves your problem.

• Automate the installation of Adobe

  I am trying to automate the installation of Adobe Reaser X.

  I downloaded the customization tool, but it needs and the msi file.  I can only find the exe file.  Can someone point me to a link.

  If anyone knows how to automate the installation with the exe file that will be just fine as well.

  After much searching I found the answer.

  /sPB /rs

  /sPB = silent installation

  /RS = reboot deleted

• Question in regards to the script for automatic filling check box

  Hello everyone.  First of all, let me say a big thank you to all the users, but also the admins of this forum.  As a user of LiveCycle newbie, I learned an incredible amount of research on the forum and reading of others.  Now, to my current question...

  I use a custom form created in LiveCycle ES 8.2 and wonder how to empower a checkbox to fill automatically (IE. 'on') based on a number entered in a numeric field by using a range of criteria.  To be more precise, I have (5) checkboxes that will be labeled as follows:

  Name: CheckBox1 < 500

  Name: CheckBox2 500-999

  Name: CheckBox3 1 000-1 499

  Name: CheckBox4 > 1 500

  Name: Checkbox5 no

  I don't want only a SINGLE checkbox auto fill based on a certain number I enter the numeric field (called "NumericField1").  For example, if I enter "889" number, I want only CheckBox2 AutoComplete in.  Not sure what script to use in the Script Editor for this.  Any help would be greatly appreciated.  Thank you very much in advance.

  MJ

  You are welcome. I added a second numeric field. NF1 is entered by the user option. NF2 is calculated field read-only to mimic your form. NF2 simply takes the value of nf1. I moved the logic of radio button in the radio button exclusion group calculate event to produce the results below. I think that's what you're after. The updated form is attached.

  

  Steve

• Automate the installation BT

  I install a bluetooth application on 700 laptops that have the Toshiba Bluetooth in them. I am trying to automate the setting up the security settings as well as to create a virtual port Server series. Can I use BTSecurityExport for this? I have tried to manually enter all the values of registry you guys create, but it does not work. It shows that the serial port exists, but does not allow me to connect. Regarding the security settings, the user interface shows that they are correct, but it still requires a PIN when you connect.

  I have try this tool also and it worked for me, but I have not configured additional COM ports. Is already an available COM port from the server that works by default. Why did you configure a second?
  The mentioned tool is just to restrict functions for security reasons as far as I can see.

• automate the smartlist using contour utility questions

  Hello
  
  IAM want to automate the smartlist using .csv for Member of the entity dimension using contour utility
  
  Create a smart list called "alnasser' member of the dimension entity E10134
  
  alnesser smarlist contains a) price b) sale c) prefixing sale d) d afterpricing) test factor has two child
  
  IAM not not see members of the smart list under alnasser
  
  file source as follows below
  
  Entity, Parent, Data Storage, Description, Data Type, Base, Plan Type (Plan1), aggregation (Plan1), Smart List ALNASSER currency
  E10134, store, ALNASSER, unspecified, USD, 1, +, ALNASSER, sales
  
  his show a column name or header not recognized
  
  How to give the source smart list with the entity dimension and where I did the source of error and give to testfactor
  
  I guess that the error with the header name alnasser smartlist
  
  Sreekumar.H

  Hello

  Could you just add the values for the smart list in the planning, once they are in place, you don't have to set them up again.
  If you can't then I would use something like LCM to create an XML with values inside and then import it into.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to automate the SSH connection/commands on a series of switches PowerConnect 3400 3500 and 6200 series.

  I'm trying to find a way to automate the commands to send a series of switches (about 20) showing some configs and save the output to a file. The way I was trying to do was using plink and creation of a batch of files for her.

  Essentially, it would be something similar to the following.

  ECHO for /f % in (devices.txt) plink % l word of PAST of USERNAME-pw-v - m C:\Batch\commands.txt > output.txt

  To split the above command, looking for my ips in the devices.txt and made a "plink pw - username PASSWORD - v IP-l m - COMMANDS > OUTPUT" for each. The problem, I'm running is that the switches do not accept logins, they constantly ask for the user and the password again. Even when you try to put them in the commands.txt he will not accept the entry. I googled using plink with dell switches but there is nothing to talk about this problem.

  So my question is, is it possible to automate this sort of thing in a batch file? Or some way to automate a series of commands to a switch via SSH? I'm just not wan't do manually connect to each of them, carry out my orders, out, reconnect and repeat. I did it on cisco switches so I thought the process would be similar but I don't understand what obstacle I'm running in here. Ideally, I'd like to see how to do this via SSH but at this point, I am ready to accept almost any alternative (secure) to automate the sending of orders for my switches.

  I hope that all makes sense.

  Sorry, I haven't used before plink, so I'm not sure what to change to get this to work. In the past, there was another Member of the community who has been able to use expect to establish connections to switches and save configs.

  Linux.Die.net/.../expect

  It may be somewhat more than installation, but you can be able to make it work for your needs.

  http://Dell.to/1RONL3D

  Let us know

• Automate the update of Windows Server R2 2012

  Hi all

  I am currently looking for a method to update automatically to our servers. Rather than use Windows update to install and reboot servers, I want to be able to automate the download and install the updates, but to impose when the server reboots automatically. I know that WSUS automatically installs updates but I don't think there is a way to control when the server should restart. Also apart from that, I know that servers come online without having to login to them manually. I think that the only way to go about this is with a script.

  Any help or insight is most appreciated. Thank you.

  It is a forum for specific consumers.

  You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus

• Automate the backup of Config

  I'm looking to install a way to backup the configuration of my C370.  Currently, I know how to do it manually via the GUI.  Is it possible to automate this process and it backs up through the CLI?  I was searching through the CLI yesterday, but I couldn't find what would save the config on the command.  I guess if I could find the command that I could set up a job through our Kiwi CatTools to do.  I would like to know if anyone knows how to do this, or if you have found another way to do this effectively.

  Thank you

  Mike

  Hi Mike,.

  There are actually two ways to do this.

  You can save the configuration of the CLI by using the saveconfig command. You can load a configuration file using the loadconfig command. I would like to run these commands first, just so that you can see the process. Basically, you can script something around these commands that could do the job.

  We also have a section of Nice knowledge base that covers this topic as well. The approach is a little differnet but the results are the same.

  How can I schedule or automate the backup of the file of configuration XML from my device?  Where he lives?  How to do a scheduled backup of the configuration of a Windows system file?

  Environment:

  -ESA with AsyncOS 6.x or later.
  -A designated host for the introduction and the storage of backups.

  NOTES:

  Familiarity with the BONES of script and forecasts of the tasks is necessary to understand and implement these tasks safely.  Please understand that many of these concepts are beyond the scope of the IronPort customer support and these sample scripts are certainly not taken in charge.  Although these steps have been successfully tested, this article is mainly for purposes of demonstration and illustration.

  The configuration file dynamically generated during the use of the recording or email of the CLI or GUI configuration tools.  To have an effective backup, it is best to "unmask" passwords, which allows you to place a ground form of passwords for local administrative accounts in the device configuration file.  For this reason, we can not simply copy a flat file "running Setup" of the device.  This method allows us to access the device first, issue a command to dynamically build the current configuration, and either save or mail a copy of this file somewhere remotely, without any intervention from the user.  Once this is done, we can then repeat or schedule this task to occur on a regular basis.

  Quickly and automatically save the configuration with the passwords exposed files:

  (1) generate a SSH key pair to use.  Verify that you can access your device via SSH without having to enter a password.  Details on this operation is provided in article #283.

  (2) create script to connect to the device, save the config and copy (or by mail).  Two simple examples written in BASH:

  Example #1: Saving the configuration to a specific host
  #! / bin/bash
  # This saves the config and then he copies locally via SCP in a directory called backup/config-ironport
  HOSTNAME = test.com
  USER name = admin
  FILENAME = "ssh $USERNAME@$HOSTNAME "saveconfig Yes"|" grep xml | cut f 3 - d "" ' "
  SCP $USERNAME@$HOSTNAME:./configuration/$FILENAME./ironport/config-backups /.

  Example #2: Emailing an email address configuration
  #! / bin/bash
  # This sends the config to MAILDEST
  HOSTNAME = MX.test.com
  USER name = admin
  [email protected] / * /.
  SSH $USERNAME@$HOSTNAME 'mailconfig $MAILDEST Yes.

  NOTE: this similar logic can be applied in any scripting language OS such as VB scripts or batch for Windows.  These scripts are intended as examples only rudimentary.

  (3) use cron or or scheduling tool to start work on a regular basis.  Services like cron or Task Scheduler in Windows are easy tools that can be used to automate simple jobs like that.  For example, the * NIX CRON configuration file follows this format:

  minute (0-59), hour (0-23, 0 = midnight), day (1-31), month (1-12), day of the week (0-6, 0 = Sunday), command

  So a good example to run this script every day at 02:00 would look like:
  00 02 * /location/your_script.sh

  Otherwise, here is another method to automate a backup of the configuration.

  How to do a scheduled backup of the configuration of a Windows system file?

  With the following procedure, you can save the configuration on a regular basis of a Windows system file.

  1 install the emulator of terminal 'PuTTY' under C:\

  2. create a text file with the following line and name it "send_config.txt" and place it under C:\ (Change of [email protected] / * / to the email address you want the configuration file must be sent to)

  mailconfig [email protected] / * /.
  3. create a text file with the following lines and name it "send_config_batch.bat" and place it under C:\
  (Change the "hostname" for the host name can be resolved or IP address of your device and the "password" to your real password for the admin account).

  C:\putty.exe-SSH hostname-l - pw admin and password C:\send_config.txt m
  output
  
  4. Add "send_config_batch.bat" to the scheduled task window.

  The Configuration file will be sent to the address specified in the "send_config.txt".

  I hope this helps!

  Christopher C Smith

  CSE
  Cisco IronPort customer

• Do not lock - automate the deletion of backups RMAN old day after a success

  Hi all

  Admin: Do not lock this thread. I moved here the database instance based on the suggestion of another Member, and the question to this forum. If you want to lock a thread, lock one in the forum of the database, not this one.

  I am looking for a way to automate the deletion of backups RMAN old days only after the occurrence of a success. At the present time, I have daily backups of L0 via crontab, and I need to create a script that can tell if a successful backup is done, then delete the old L0 if it has. Any suggestions on how to start? I'm stuck in code to see if a successful backup has been performed.

  Oracle 11.2.0.3

  Exadata (4 nodes)

  Linux 5.10

  * a from database forum

  A backup is completed when the backup command is complete.

  You have two 'blocks execution' in your rman script.

  Put the DELETE OBSOLETE between the end of the last execution block and EXIT:

  OUTPUT CHANNEL fs1b;
  OUTPUT CHANNEL fs2b;
  OUTPUT CHANNEL fs3b;
  CHANNEL fs4b;
  CHANNEL fs5b;
  CHANNEL fs6b;
  CHANNEL fs7b;
  CHANNEL fs8b;

  }

  remove the backup noprompt obsolete;
  "exit";

  You also want to do some other household:

  cross-checking of backup;

  delete expired backup noprompt.

  overlap archivelog all;

  delete noprompt expired archivelog all;

• automate the changing images while retaining the page layout

  First of all I'm a complete noob to InDesign I have to load several pictures on a model separately (product shots if its just a pic at a time) after googling ID, I realized sizing questions has been the best program to keep all the images the same size in a framework is possible to automate the process of loading the images instead of me having to do it manually one by one?

  If your model has graphic empty placeholder frames for your photos, you can select several photos at once in the Place dialog box (file > Place). Then you will get thumbnails for each of them in your cursor placement, and you can move your cursor over each placeholder image, click to place, move to the next, click, etc.

  When you have a cursor with several images loaded, it will display a number (the number of remaining pictures). You can browse the images in your cursor with the arrow keys (left arrow, right arrow).

• Automate the FM2015 publish via CLI call

  Is it possible to automate Framemaker 2015 file > publish, that is to say to call this function from the command line?

  Typical use might be to automate the construction of output html/pdf/etc since a buildbot Jenkins.

  A bit with the question: why isn't pdf option in the file > publish dialog box? Have the output from the menu pdf

  under file > save as PDF and the rest under file > publish might have been good enough in 2015 but seriously:

  This after all is 2016.

  BR Bjørn Asle

  See this message:

  Re: How to access the Publisher module

• Path to script and automate the vmkfstools command?

  Very long story short, running vSphere 5, I need a way to execute the command 'vmkfstools y 60' against my stores of data to recover free space on my table of Compellent SAN.

  This article explains the command and the object: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2014849

  From one or more hosts, I so need to go into each VMFS data store and run the command "vmkfstools y XX" to reclaim space. Otherwise the Compellent table see SVMotion jobs and snapshots as "new entries" and never release the free space.

  To automate this, I would use PowerCLI and maybe just run the script as a scheduled my vSphere Server task.

  I understand also the VMA device can do this kind of stuff, but I don't understand how to automate/schedule tasks with it more I prefer using PowerCLI.

  Anyway, sorry for the question noob and thanks in advance. Any help is very appreciated!

  The problem is we use thin Volumes put into service on a Board of 3par, with T10 off Unmap (which is now the default) freeing up space by deleting a virtual machine or by a storage vmotion means space gets released to the VMWare/data store layer and can be reused by Vpshere but he is not recovered at the Array level , delivering a vmkfstools, writes a file in the data store removes it returns T10Unmap to the matrix, the 3par then and returns this space to the free pool. It works when we manually we just want until VMWare decide UNMAP turn automate it.

  Brett