Automatic configuration - stop application tier services on all nodes?

Similar Questions

• No way to mount a diskgroup on * all * nodes in node 1?

  Hello

  We lack GI/Oracle RAC 11 g 2 on RH6 with storage of udev (abandoned since ASMLib).

  Please correct me if I'm wrong: there is no way to mount a diskgroup that you created

  from the node on which you just did on all nodes of your cluster?

  I don't have to connect to the remaining nodes and run my right to ALTER DISKGROUP MONTER?

  Thank you.

  Kind regards

  SEB

  If you add a new asmca diskgroup (ASM Configuration Assistant), it mounts diskgroup to all nodes for you.

  It also allows running local Assembly and installation on all nodes.

  Here you can find the link to the documentation for the asmca:

  Oracle ASM Setup Wizard

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• I can't stop the automatic delivery of applications. on HP Photosmart 5520 printer all in one

  I can't stop the automatic delivery of applications. on HP Photosmart 5520 printer all in one

  To add to what sabertooth04 said, here a link to a document that deals with the applications of printing for your printer model. Click the menu drop down titled "Managing planned delivery Print Apps" and the option to cancel or remove an application will be available for you click on and examine measures to remove this application. I hope this helps.

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Since I downloaded El Capitan I get a notice of entry of device of 'Santa Barbara School District' saying that they can automatically configure my Mac!... I don't want that at all

  Since I downloaded El Capitan I get a notice of entry of device of 'Santa Barbara School District' saying that they can automatically configure my Mac!... I don't want that at all!... It appears every 30 minutes or so... El Capitan is safe?

  The computer has a serial number which is included in a registration of devices belonging to an organization. If you do not belong to this organization and that you didn't acquire the device with him, then there was an error or the device (or the logic board) is stolen. If the unit was purchased used, for example on Ebay, or if the card has been replaced by an unauthorized service provider, then it is almost certainly stolen goods. Otherwise, you must take the device to an Apple Store or to an other authorized service provider to have serial number has changed. May asked you proof of ownership.

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• Cannot display networks wireless range... impossible to start the Automatic Configuration service

  My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.

  Hello

  If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.

  Maybe this can help, http://www.ezlan.net/wzc.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Automatic configuration service ipv6 has any special installation?

  When I run the

  automatic configuration service IPv6 address

  order of the interface fa0/0 R2, R3 on the other end is configured with a static global unicast address, should R2 use NDP and find the prefix and eui - 64 to make the host ID without the need for any other configuration specail?

  Or I have to correctly answer to R2 R3 value?

  For the moment, I do this in GN3 but R2 is only coming up with a link-local address.

  Thanks in advance.

  Hello

  by default, Cisco routers behave as IPv6 hosts until ipv6, unicast routing is configured in global configuration mode and then it starts sending RAs and response to the RS of the device that is configured on an interface SLAAC.

  Then configure this command on R3 and R2 will obtain a prefix of R3 and use EUI64 to complete the host Party.

  Kind regards.

  Alain

  Remember messages useful rate.

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• Configuration Application Porvider Services (APS) for SmartView V11 - Linux

  I had a distributed architecture for Hyperion Planning. Essbase is hosted on a Linux server.
  
  The essbase is on Shared Services hosted on a different server.
  
  While trying to create a data by the common service provider connection (in Smart View - Ver 11) the URL not solved.
  
  Is it possible to configure APS for shared services.
  
  Thank you very much...

  Can you give some details on your architecture?

  In general, do a few checks:
  1. when installing the web application service provider, not is it registered properly with Shared Services.
  2 check the manual deployment guide and find the URL that will tell you if the deployment is very good.
  3. in the Essbase administration console, add the server of the provider under Hyperion server vendor.
  4. the server ping APS and netstat to see if the service is in place.

  Kind regards
  Chrystelle

• Problems with the configuration of the ntp service application

  Hi people,

  I'm stuck at the configuration of the ntp service to start by default on an esxi server via perl.

  That's what I'm doing:

  My $hostServiceConfig = new HostServiceConfig (serviceId = > 'ntpd', startupPolicy = > 'on');

  My $hsca = [];

  Push (hsca @$, $hostServiceConfig);

  My $hostConfigSpec = new HostConfigSpec (service = > $hsca);

  My $taskRef = $hostProfileManager-> ApplyHostConfig_Task (host = > $host, context = > $hostConfigSpec);

  When I ask the status of the command fails:

  SOAP fault:

  -----------

  Error string: the operation is not allowed in the current state.

  Lack of details: InvalidState

  I guess I'm just missing some small detail. Maybe someone sees my mistake right now :-)

  Hi eholtz,

  Here's the code I added to hostServiceManagement.pl (IIRC!):

  1. check the boot strategy:

  sub checkServiceEnabled {
          my ($serviceSystem,$service) = @_;
  
          my $services = $serviceSystem->serviceInfo->service;
  
          foreach(@$services) {
                  if($_->key eq $service) {
                          return $_->policy;
                  }
          }
          return 0;
  }
  

  2 then disable the service:

  my $policy = &checkServiceEnabled($serviceSystem,$service);
  if($policy eq "on") {
          eval {
                  $serviceSystem->UpdateServicePolicy(id => $service, policy => "off");
                  print "\t" . color("cyan") . "Successfully disabled $service\n" . color("reset");
          };
          if($@) {
                  print "\t" . color("red") . "Error: Unable to change startup policy on service \"$service\" due to: " . $@ . color("reset") . "\n";
          }
  }elsif($policy eq "off") {
          print "\t" . color("yellow") . "$service is already disabled" . color("reset") . "\n";
  } else {
          print "\t" . color("red") . "Error: Unknown startup policy \"$policy\"" . color("reset") . "\n";
  }
  

  And to allow:

  my $policy = &checkServiceEnabled($serviceSystem,$service);
  if($policy eq "off") {
          eval {
                  $serviceSystem->UpdateServicePolicy(id => $service, policy => "on");
                  print "\t" . color("cyan") . "Successfully enabled $service\n" . color("reset");
          };
          if($@) {
                  print "\t" . color("red") . "Error: Unable to change startup policy on service \"$service\" due to: " . $@ . color("reset") . "\n";                     }
  
  }elsif($policy eq "on") {
          print "\t" . color("yellow") . "$service is already enabled" . color("reset") . "\n";
  } else {
          print "\t" . color("red") . "Error: Unknown startup policy \"$policy\"" . color("reset") . "\n";
  }
  

  P.s.: based on your current score, you should be able to PM me now...

  Kind regards

  --

  Thomas

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• Best practices Check - Configuration of the Communication Service

  So, we have the following here the use case...

  Background:

  We have a FMS instance that has several teams using multiple applications, air conditioned and have their own specific communication needs. Teams of infrastructure, such as the database or Server team are also included on this FMS. We have services configured around applications and their dependencies, so a single object will exist in several services.

  To work around the lack of granularity configuration and horrible the service-based E-mail in the form, I created an event rule that queries for FSMServices affected for a given event and iterates over all the unique services, pulling on the notification settings through our way of soil and trigger Actions from the command line or appropriate accordingly EmailActions... we use of the-d in the field of shortDesc service options.

  Example:

  

  (You can ask for a detailed explanation of what do the settings, if you wish, or that the levels called - but they are just an additive representation of the levels of severity in foglight)

  Here's our new problem:

  We have teams who want notification on certain rules of certain severities (such as criticism), but not others. This has created the need for a 'white list' or the 'black list' of the original names of rule for the event to determine whether an event should be communicated to our NOC or paged on our teams.

  My solution of thought:

  
  

  We will create a new cartridge (FoglightCommunication) that contains a custom dashboard and the definition of the topology for a FSMServiceConfig object. This object contains a white list or black list for some rules should be provided for each service. This TopologyObject would also resume functionality which serve as my current shortDesc variables... Essentially, it would contain all THE information relevant to its corresponding FSMService object configuration. We have experience in creating modules advanced both in the creation of Foglight cartridge/agents/topology definitions.

  The dashboard would exist to facilitate the configuration of this new object and to facilitate the visualization of the current communication service. This would also allow our team to allow the teams less educated with Foglight feature more easily and completely configure their own communication service. Empowering the team owner is always a good thing

  My Question:

  Did someone in the quest (it's such a name cooler than Dell) sees a problem with this? My only concern is that we could lose all our configuration information to uninstall the cartridge for a upgrade problem. He might consider a work around with an option to export/import... but it's a messy solution and a non-human evidence. Is there a way to specify the data to be persisted, even if the cartridge that has defined this topology definition is uninstalled?

  I'd appreciate any comments or thoughts. Thank you!

  Hi Adam.

  This looks like a very useful customization. I don't see why your team should not move forward with that.

  I also like the idea of building an import/export feature in your cartridge in order to preserve the configurations in case you need to uninstall the cartridge. Note that even in this case, type of custom topology that was written to the repository data Foglight will always be there (i.e. it will not be served unless you specifically request this) - so you can be able to get Foglight to save the configuration information important for you.

  I encourage you to update the community on your progress on this and send questions, screencaps, etc., as needed.

  Thank you!

  Robert Statsinger