Automatic failover
In a tightly controlled environment, where very little changes - Protection groups are static and the unique Recovery Plan is well defined - is it possible to automatically run the Recovery Plan if the instantiation of the right conditions can be measured/quantified? With PowerShell example?
I know there are risks with this approach and war business vs. technical to set and meet the RTOS will be delivered on time.
I'm just curious to know if this is possible and how it could be achieved. Either way, a layer of virtualized storage is not an option.
TIA,
HamR.
I'll tell you it's impossible...
I was talking with Carter Shaklin (MP for VMware PowerCLI) on what tasks could be automated with powershell for MRS.
I take it a good sign that VMware begins the process of powershell enabling their products to senior management as they did with ESX/vCenter.
I would be VERY surprised to see this SDK for MRS. result would expose to ordinary users object/properties/methods required to actually trigger an execution of a DR plan. I think that VMware remained engaged in the position that order to issue a 'GO' on the DR plan will require high-level approval of management of class C first...
If you are looking for something that would allow an automatic failover - really watch you any other 3rd party sellers availability products that allow you to create emotionally a "stretched" cluster The problem with these technicians, is that they are NOT designed for multisite DR, but the failure of a component - such as the death of a host or VM...
Concerning
Mike Landry
RTFM education
Author of the book of MRS:http://stores.lulu.com/rtfm
Free PDF or printed at price
Tags: VMware
Similar Questions
-
Automatic failover cluster Bugging head
Hi all
I am faced with continuous cluster due to network problem failover. I have two cluster CLUS1 and CLUS2, he got automatic failover cluster if all resources being normal. The error description is as follows: -.
Event type: Information
Event source: vxio
Event category: no
Event ID: 29
Date: 2010-09-27
Time: 07:23:38
User: n/a
Description:
vxio: disk driver returned the error 80000011 when vxio tried to read block 2222998 on Harddisk89.
I don't know, it's always because as the high utilization of the processor on a particular server or what. We have done several successful and trails w.r.to SAN, memory and performance optimization, but everything seems OK but even we in the face of this failover as a routine and fine.
Can you suggest me on the subject that... What all could be the possible reasons for this.
Better suggest me the solution from your end.
Also any suggestions and comments in brackets
+ Is the place pilot a gradation is a possible solution? [Even it will not be successful on one of the test of trail]
+ Increase SAN can be the solution? [Sufficient SAN is already there that again I ask]
+ Or memory problem? [Same memory is sufficient to perform the work]
+ It is not particularly over a certain period, as at the end of week or Monthened.
This shift has become a routine job, same everything seems fine? Please advise suggest his irritates my head a lot.
Hi VenOMCM,
The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.
Hope the helps of information.
-
Hello!
I tried to find out if SyncRep supports automatic failover. So far I have not found a definitive answer, and I was hoping someone could help me to answer this questions
Best regards
Kim
Hello, Kim.
SyncRep does not currently automatic failover.
Kind regards
Don
-
Automatic failover with Transport and apply Lag fails with ORA-16798
Hello
I configured a physical database maximum Performance, accelerated failover mode standby. I set FastStartFailoverLagLimit to 3 hours (10800 seconds).If I understand the Oracle documentation, Fast-Start failover should work with Max Performance, as long the Transport timeout is whithin the FastStartFailoverLagLimit.
So I started a few scripts, generated some loading, so I have a Transport and apply the shift of 3-4 Minutes.
Then I killed pmon to cause an automatic failover.Failover failed with ORA-16798.
I know, there is Note 846087.1 , which describes the problem, but I thought that automatic failover should work in this configuration.
Is this a bug or am I wrong?Thank you very much in advance.
Configuration Data Guard standby:
-----------------------------------------------Role: STANDBY PHYSICS
State of destination: apply
Transport delay: 3 minutes 3 seconds (calculated two seconds ago)
Apply the Lag: 3 minutes 26 seconds (calculated 0 seconds ago)
Apply the rate: 23,52 MB/s
Real-time query: OFF
Occurrence (s):
...Properties:
...
LogXptMode = "async".
DelayMins = '0'
Binding = "optional."
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = "300"
NetTimeout = "15"
RedoCompression = "DISABLE."
...State of the database:
SUCCESSFast failover configuration:
-----------------------------------------------Fast-Start Failover: ENABLED
Threshold: 180 seconds
Target: < Targetname >
Observer: < servername >
Offset limit: 10800 seconds
Primary closure: TRUE
Auto-Rétablir: TRUE
Reconnection of the observer: (none)
Substitution of the observer: FALSE...
Messages of the DG - Log:
-----------------------------------------------
FAILOVER TO < DB >
Starting failover to the < DB > database
Notifying Oracle Clusterware to disassembly for the FAILOVER database
02/02/2015-13:38:04
Error running SQL = 604, sql = [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FI
ORA-00604: an error has occurred at the SQL level 1 recursive
ORA-00283: cool cancelled due to errors
ORA-16171: RECOVER... FINISHING not allowed away for thr 1, seq 34-37
Failed to retrieve Terminal.
Database error resource SetState (16798)
02/02/2015-13:38:08
Command FAILOVER < DB > completed with error ORA-16798The FastStartFailoverLagLimit property specifies the amount of data, in seconds, during which the standby database target can
delay on the main database on the recovery plan applied. If again applied Eve point database notes that many
seconds of the primary database redo point generation, accelerated tipping is allowed.
Errors show a gap for sequences 34-37, which is not optimal for a fast failover.
Even if FastStartFailoverLagLimit is set to 3 hours, there is too much data loss for the standby site because newspapers are not available on the backup server and the Broker cannot activate the Pb of the day before.
I recommend to to lean on increase the bandwidth network.
Concerning
-
automatic failover - failover unable
Hi gurus,
I have expirienced strange behavior of automatic failover of data guard.
According to the Observer newspaper failover failed:
Observer began
[W000 15:57:01.46 02/20] Observer began.
16:00:07.44 Thursday, February 20, 2014
Opening of failover accelerated to database 'ipcblna2 '...
Perform the failover NOW, please wait...
Error:
ORA-03113: end of file on communication channel
Process-ID: 2785
Session ID: 162 Seriennummer: 5
Unable to failover
16:02:08.55 Thursday, February 20, 2014
[W000 16:02:08.55 02/20] Failover failed. Leave the observer.
Observer stopped
However according to primary alerts of new ipcblna2 journal:
Successful failover. Primary database is now IPCBLNA2.
Primary alerts of new ipcblna2 journal:
Thu Feb 20 15:59:35 2014
RFS [7]: network Possible disconnect with primary database
Thu Feb 20 15:59:35 2014
RFS [2]: network Possible disconnect with primary database
Thu Feb 20 15:59:35 2014
RFS [6]: network Possible disconnect with primary database
Fri 20 Feb 16:00:07 2014
An attempt to failover accelerated because the threshold of 30 seconds is up.
Fri 20 Feb 16:00:07 2014
MICHAEL: Failover beginning
Fri 20 Feb 16:00:07 2014
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH FORCE
Terminal recovery: real-time decision applies
Fri 20 Feb 16:00:07 2014
MRP0: Background Media Recovery cancelled with status 16037
Errors in the /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_pr00_2892.trc file:
ORA-16037: Benutzer Hat Abbruch von managed recovery-procedure statement
Managed Standby recovery not using real time applies
Recovery interrupted!
Data files recovered in a consistent state to change 262827045900
Waiting for pid MRP0 2870 to terminate
Errors in the /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_pr00_2892.trc file:
ORA-16037: Benutzer Hat Abbruch von managed recovery-procedure statement
Fri 20 Feb 16:00:07 2014
MRP0: Stopping the process background Media Recovery (ipcdb)
Terminal recovery: real time apply
Waiting for "D000" dispatcher stopped
Fri 20 16:00:23 Feb 2014
ARC2: Waiting for example near full
Fri 20 Feb 16:02:10 2014
Waiting for Server shared "S000" to die
Fri 20 Feb 16:02:23 2014
ARC2: Waiting for example close has expired
ARC2: Waiting for example near full
Fri 20 Feb 16:04:23 2014
ARC2: Waiting for example close has expired
Logging of 1034 errors received on the eve
Errors in the /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_arc2_2827.trc file:
ORA-01034: ORACLE non available
Heartbeat PING [ARC2]: Unable to connect to the day before "ipcblna". The error is 1034.
ARC2: Waiting for example near full
Fri 20 Feb 16:05:07 2014
Renounce wait dispatchers/dispatchers and shared servers to die
CLOSING: kill the server sessions.
CLOSED: all the closing of sessions successfully.
Fri 20 Feb 16:05:07 2014
SMON: disabling of cache recovery
Try to perform a Terminal recovery (ipcdb)
Start of recovery media: Managed Standby Recovery (ipcdb)
has started the process of logmerger
Fri 20 Feb 16:05:07 2014
Managed Standby recovery not using real time applies
Fri 20 Feb 16:05:07 2014
ARC2: Waiting for example close over
Parallel Media Recovery started with 8 slaves
To start: Eve redo Logfile to check-in
End: Standby redo Logfile to check-in
"Terminal recovery Timestamp is February 20, 2014 16:05:08.
Terminal recovery: application standby redo logs.
Terminal recovery: thread 1 seq # 12 again required
Recovery of terminal:
Online Redo Log recovery: thread 1 mem Group 6 Seq 12 reading 0
Mem # 0: /u01/app/oracle/oradata/IPCBLNA2/stdbyredo01.log
Identified end-of-Redo for thread 1 sequence 12
Incomplete recovery applied to change 262827045901 20/02/2014 time 15:59:35
Media recovery complete (ipcdb)
Terminal recovery: success of
Fri 20 Feb 16:05:08 2014
Identified end-of-Redo for thread 1 sequence 12
Activation reset sleep ID 652569681 (0x26e56c51)
ARCH: Stopped archiving, error occurred. Will continue to retry
ORACLE Instance ipcdb - check-in error
ORA-16014: Log sequence 6-Nr. 12 non archiviert, keine Energiepflanzen vision
ORA-00312: line-6, 1-wire Journal: ' / u01/app/oracle/oradata/IPCBLNA2/stdbyredo01.log'
Errors in the /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_arc0_2823.trc file:
ORA-16014: Log sequence 6-Nr. 12 non archiviert, keine Energiepflanzen vision
ORA-00312: line-6, 1-wire Journal: ' / u01/app/oracle/oradata/IPCBLNA2/stdbyredo01.log'
Completed: ALTER DATABASE RECOVER MANAGED FORCE STANDBY DATABASE FINISH
ALTER DATABASE COMMIT TO SWITCHING TO THE MAIN WAITING WITH THE STOP OF THE SESSION
DATABASE ALTER CROSSING elementary SCHOOL (ipcdb)
Waiting for the transition from role maximum is 15 minutes.
Backup controlfile written to trace the file /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_rsm0_2844.trc
Terminal standby recovery start SCN: 262827045900
RESETLOGS after complete through change 262827045901
Log in online /u01/app/oracle/oradata/IPCBLNA2/redo01.log: thread 1 Group 1 had been previously authorized
Log in online /u01/app/oracle/oradata/IPCBLNA2/redo02.log: thread 1 group 2 was previously disabled
Log in online /u01/app/oracle/oradata/IPCBLNA2/redo03.log: thread 1 Group 3 has been previously authorized
Log in online /u01/app/oracle/oradata/IPCBLNA2/redo04.log: thread 1 Group 4 has been previously authorized
Log in online /u01/app/oracle/oradata/IPCBLNA2/redo05.log: thread 1 Group 5 has been previously authorized
Standby became primary YVERT: 262827045899
Fri 20 Feb 16:05:09 2014
Assessment target incarnation to 20
The digital switchover: completed - mounted as primary database
Completed: ALTER DATABASE COMMIT to SWITCHING to the MAIN WAITING WITH the STOP of the SESSION
Fri 20 Feb 16:05:09 2014
Arc1: become the "no SRL" ARCH
ALTER DATABASE OPEN
Initializing data Guard Broker...
Fri 20 Feb 16:05:09 2014
Assigning activation ID 652556989 (0x26e53abd)
Thread 1 Advanced to record the sequence 2 (open thread)
Thread 1 is open to the sequence of log 2
Currently Journal # 2 seq # 2 mem # 0: /u01/app/oracle/oradata/IPCBLNA2/redo02.log
Opening of redo thread 1
View MTTR is disabled, because FAST_START_MTTR_TARGET is not defined
SMON: enabling cache recovery
Fri 20 Feb 16:05:10 2014
ARC3: LGWR is scheduled for archive destination LOG_ARCHIVE_DEST_2 after log command
Fri 20 Feb 16:05:10 2014
NSA2 started with pid = 29, OS id = 5464
Successfully online 2 undo Tablespace.
Dictionary check start
Logging of 1034 errors received on the eve
Errors in the /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_arc2_2827.trc file:
ORA-01034: ORACLE non available
Heartbeat PING [ARC2]: Unable to connect to the day before "ipcblna". The error is 1034.
Logging of 1034 errors received on the eve
Errors in the /u01/app/oracle/diag/rdbms/ipcblna2/ipcdb/trace/ipcdb_arc3_2829.trc file:
ORA-01034: ORACLE non available
ARC3: Error 1034 creation log file from archive for "ipcblna."
Archived journal 254 extra for each sequence 1 1 0x26e53abd dest ID thread entry 1:
Archiver released errors process. Is more interrupted
Verification of the complete dictionary
Check the compatibility of the header files for tablespace 11g encryption...
Compatibility check header files 11g for tablespace encryption completed
SMON: enabling the recovery of tx
From OCMS background process
Fri 20 Feb 16:05:10 2014
OCMS started with pid = 30, OS id = 5466
Database character set is AL32UTF8
Fri 20 Feb 16:05:10 2014
found dead shared server "S000", pid = (18: 1)
idle dispatcher "D000" completed, pid = (17: 1)
No Resource Manager plan active
From QMNC background process
Fri 20 Feb 16:05:11 2014
QMNC started with pid = 40, OS id = 5472
LOGSTDBY: Validation controlfile with logical metadata
LOGSTDBY: Validation complete
ALTER SYSTEM SET service_names = 'IPCBLNA2.idealo.de' SCOPE = MEMORY SID = "ipcdb";
ALTER SYSTEM SET service_names = 'IPCBLNA2.idealo.de', 'RESIN_READ1' SCOPE = MEMORY SID = "ipcdb";
ALTER SYSTEM SET service_names = 'RESIN_READ1', 'IPCBLNA2.idealo.de', 'RESIN_WRITE' SCOPE = MEMORY SID = "ipcdb";
Completed: ALTER DATABASE OPEN
ALTER SYSTEM SET log_archive_trace = 0 SCOPE = BOTH SID = "ipcdb";
ALTER SYSTEM SET log_archive_format='%t_%s_%r.dbf' SCOPE = SPFILE SID = 'ipcdb ';
ALTER SYSTEM SET standby_file_management = 'AUTO' SCOPE = BOTH SID ='* ';
ALTER SYSTEM SET archive_lag_target = 0 SCOPE = BOTH SID ='* ';
ALTER SYSTEM SET log_archive_max_processes = 5 SCOPE = BOTH SID ='* ';
ALTER SYSTEM SET log_archive_min_succeed_dest = 1 SCOPE = BOTH SID ='* ';
ALTER SYSTEM SET db_file_name_convert = ' / IPCBLNA / ', ' / IPCBLNA2 / ' SCOPE = SPFILE;
ALTER SYSTEM SET log_file_name_convert = ' / IPCBLNA / ', ' / IPCBLNA2 / ' SCOPE = SPFILE;
Fri 20 Feb 16:05:11 2014
Using the default for the STANDBY_ARCHIVE_DEST as USE_DB_RECOVERY_FILE_DEST parameter value
ARC3: FROM PROCESS ARCH
ALTER SYSTEM SET log_archive_dest_state_2 = 'RESET' SCOPE = BOTH;
Fri 20 Feb 16:05:11 2014
ARC5 started with pid = 43, OS id = 5478
Successful failover. Primary database is now IPCBLNA2.
Thread 1 Advanced to save sequence 3 (switch LGWR)
Currently Journal # 3 seq # 3 mem # 0: /u01/app/oracle/oradata/IPCBLNA2/redo03.log
Fri 20 Feb 16:05:12 2014
Archived journal 255 extra for each sequence 1 2 0x26e53abd dest ID thread entry 1:
ARC5: Started archiving
ARC3: FROM PROCESS ARCH COMPLETE
krsk_srl_archive_int: enabling archiving delayed physical standby SRls
Identified end-of-Redo for thread 1 sequence 12
Archived journal 256 additional for each sequence 1 12 0x26e56c51 dest ID thread entry 1:
From CJQ0 background process
Fri 20 Feb 16:05:14 2014
CJQ0 started with pid = 42, OS id = 5490
Fri 20 Feb 16:05:18 2014
Safety started with pid = 50, OS id = 5504
steps to reproduce:
the judgment on the primary
configuration:
DGMGRL > show fast_start failover;
Fast-Start Failover: ENABLED
Threshold: 30 seconds
Target: ipcblna2
Observer: s146
Offset limit: 7200 seconds
Primary closure: TRUE
Auto-Rétablir: TRUE
Configurable failover conditions
Animal health conditions:
Corrupt Controlfile YES
Corrupt YES dictionary
Inaccessible logfile No.
Stuck archive ONLY
YES offline data file
Oracle error conditions:
(none)
primary news after failover:
Database - ipcblna2
Role: PRIMARY
State of destination: TRANSPORT-WE
Occurrence (s):
ipcdb
Database error (s):
ORA-16820: accelerated failover observer observes is no longer this database
Warning (s) of database:
ORA-16829: accelerated failover configuration is trolling
Properties:
DGConnectIdentifier = "ipcblna2".
ObserverConnectIdentifier = "
LogXptMode = "async".
DelayMins = '0'
Binding = "optional."
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = "300"
NetTimeout = "30"
RedoCompression = "DISABLE."
LogShipping = 'ON '.
PreferredApplyInstance = "
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO '.
StandbyFileManagement = 'AUTO '.
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '5'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ' / IPCBLNA /, / IPCBLNA2 / '.
LogFileNameConvert = ' / IPCBLNA /, / IPCBLNA2 / '.
FastStartFailoverTarget = "ipcblna".
StatusReport = "(monitor).
InconsistentProperties = "(monitor).
InconsistentLogXptProps = "(monitor).
SendQEntries = "(monitor).
LogXptStatus = "(monitor).
RecvQEntries = "(monitor).
HostName = "rac4.lvl.bln."
Nom_sid = "ipcdb".
StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=rac4.lvl.bln) (PORT = 1521)) (CONNECT_DATA = (SID = ipcdb)))'
StandbyArchiveLocation = "USE_DB_RECOVERY_FILE_DEST".
AlternateLocation = "
LogArchiveTrace = '0'
LogArchiveFormat = '% t_%s_%r.dbf '.
TopWaitEvents = "(monitor).
config after failover:
Configuration - dg_newtest
Protection mode: MaxPerformance
Databases:
ipcblna2 - primary database
Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
ipcblna - (*) physical standby database (disabled)
ORA-16661: database backup must be restored
Fast-Start Failover: ENABLED
The configuration status:
ERROR
Perhaps a clue:
strange behaviour occurred after the configuration of the shared server connections. before automatic failover worked very well.
relevant parameter:
* .shared_servers = 10
* Once = 445
* .session_cached_cursors = 300
* runoff = 400
* .open_cursors = 500
* .log_archive_dest_2 = "service = db_unique_name VALID_FOR = (ALL_LOGFILES, ALL_ROLES)"ipcblna2"="ipcblna2"net_timeout = 30', ' valid_for = (all_logfiles, primary_role)"
* .job_queue_processes = 1000
* .dispatchers ='(protocol=tcp) (dispatchers = 1)(sessions=400) '
* .log_archive_dest_state_2 = 'ENABLE '.
11 GR 2 on rhel5
Thank you
Hi oraman,
You can check the broker for this config. Connect to the database with dgmgrl and get the config database:
See the verbose XXX database;
The parameter 'StaticConnectIdentifier' will tell you what data Guard Broker expects to find when it needs to restart a database. You must create a static entry to the listener with the service_name in this setting.
Make sure you have the "SERVER = DEDICATED" in the connection string. If you set this explicit, default oracle shared a connection via the server connection, which could cause your question.
Concerning
Thomas
-
Storage vMotion allows automatic failover to the replicated copy?
With vSphere replication allow "Storage vMotion" automatic failover to the copy replicated in case of a failure of the data store?
Trying to figure out a solution where if A SAN fails, we can install SAN B to pick up without any interruption of service.
Welcome to the community - Storage vMotion does not provide this type of functionality, you will need to get to the VMware Site Recovery Manager (SRM), but it will be some time - failure
-
By comparing the different editions for an automatic failover
Hi all
I need to select a product of virtualization to a new project (VMware, Microsoft or Citrix). I did a lot of reading and I'm leaning towards VMware but I'm worried about the cost. The condition is to have two host computers physical (for redundancy) connected to an external storage with the possibility of performing automatic failover, while if one host fails other pics upwards. I also need to be able to back up the entire configuration, including all the VMS tape so that I can recover if the whole system is out of service.
My question is that the high availability feature that is included in the Standard edition can do, or if I should also get the functionality DRS and VMotion which are only in the Enterprise edition.
Kind regards
No interruption of service there is nothing from now...
HA will ensure that your virtual machines are fed to another node in a cluster, HA has allowed, in case of failure of the host or an isolated situation. HA may also be able to on a VM when VM honor as a characteristic of expermintal.
DRS will be dynamically balancing the resources in the cluster and the availability of resources for each virtual computer.
vMotion is a live migration of a virtual machine in a cluster or farm of hosts with compitable CPUs. But the ESX Server hosting work inorder to facilitate a vMotion of a VM.
SVMotion is a live migration of a virtual machine in data warehouses, such as local storage storage SAN/iSCSI based, while the virtual machine is still in service.
SRM is the site recovery Manager, which allows you to switch to another site in the same set site is inaccessible.
Fault tolerance is the next feature that allows you to run your H/W failure continuously, without interruption of service in case of VMs or any other type of failure of the host.
For now, you should be good with the standard edition, which supports H, since no interruption of service, it is not what you are looking for immediately.
I hope this helps.
-Surya
-
Automatic failover of server, not exactly by using CSS to load balancing?
Hello
I investigated the use of the unique CSS11501 box to meet a specific requirement of customers for what follows.
A sticky connection to a Winframe Cluster(client side) to a backend via a VIP web servers. The reason for the sticky connection with the main server is that there are additional servers providing services to two servers independent backend web service VIP.
Most traffic on the client side will come to a limited set of ip addresses (or maybe even one) that represents the many winframe unique sessions i.e.unique browser sessions. I think that this can be achieved by using Cookies. Is this OK and there at - it another way to do this?
In the background that VIP must use only the web server main, even though he is active/available, but have the ability to switch automatically to a second server, if one breaks down.
I believe that it is possible to use a script or the HTTP protocol in the service keepalive. My question is what balancing method can be used to achieve this type of active / standby (HSRP) as a feature on the CCS for Services (Servers) attached?
Thanks in advance,
Regan
Regan,
1 cookie should be used to stickyness if ip addresses is not allowed.
2 check the functionality of the backend I'm sorry.
This allows you to configure the normal servers [or one] who will receive all traffic and if they are all declining, the sorry server will be used.
So in your case, the backup server will be defined as server sorry.
The command you need is primary sorryserver under the definition of the content rule.
Kind regards
Gilles.
-
on DG HA, automatic failover
I want to know dg ha
Forward to your response
Thank y
If the primary database crashed, I'm afraid that you shouldn't wait of database failover, the digital switchover.
The step for your reference:
failover
1. get the waking state, SELECT database NAME, RESETLOGS_TIME, LOG_MODE, OPEN_MODE, PROTECTION_MODE, REMOTE_ARCHIVE, DATABASE_ROLE, SWITCHOVER_STATUS, FORCE_LOGGING FROM v$ database;
2 stop repeat applies: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
3. stop the redo log transpotision:ALTER DATABASE RECOVER MANAGED standby DATABASE FORCE FINISH;
4. transition to the primary role: ALTER DATABASE COMMIT to the PRIMARY WITH the SESSION STOP CROSSING;
5. open the database: ALTER DATABASE OPEN;
-
EqualLogic SRM 5 automatic failover test creates instant reserve 100% on replica cloned
Is anyway to stop the 5 MRS. creating reserve snapshot of 100% on a replica cloned during a test failover. It seems was completely ignore the default group settings.
Thank you
Ian
Hi Don,
I talked to some of the guys at Dell. Its a bug in the RSA for vSPhere 5 which will be corrected by a patch. Thanks for the suggestion though.
Ian
-
Attempt #1: My computer froze, I stopped him. When I restarted it, it is impossible to load windows. Instead of loading, I came to the Acer Empowering screne then the windows error recovery screne. He is gone to start window repair and tried to auto repair. Now I'm waiting... 8 minutes later Auto start, micorsoft screne with green bar. Then black screne and that's all she wrote.
Attempt # 2: I'll restart in safe mode. In the advanced boot option, I selected restart in safe mode. Loading the screne drivers then black scene, mouse pointer I moveit autour. Journal of the screne window I get pasword it goes to the start menu button visible from vista Home premium welcome screne but I can't access it. The 'hour glass' circle does not move and I'm waiting for... 15 minutes nothing happens.
The #3 attempt: the safe mode with network. Repeat every attempt #2 loading drivers at a standstill screne
Attempt #4 I give up Please HELP.
Follow the instructions to make a repair disk Bootable Vista, to do a startup repair.
If this does not work, follow the Acer info on how to do the eRecovery back to factory settings:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2See you soon.
Mick Murphy - Microsoft partner
-
A question about Automatic Client failover
Hello everyone
My question is this:
What are the versions of the client which supports automatic failover of Client in a Configuration of data protection?
Thank you very much.Hello;
It goes back at least 8.0:
8.0.x - 8.1.x: example configuration of failover (TAF) transparent Application on UNIX [69745.1 ID]
I don't remember much of Oracle 7.
H3. But then, that's why exist databases.
Oracle fail Security Concepts and Administration Guide version 3.2.1 for Windows NT and Windows 2000 A95194-01
Not sure it confirms more than 8 but at some point, no matter his more long than the Oracle, the operating system software and hardware is all desupported. In addition, they will not work with something new.
Best regards
mseberg
Published by: mseberg on April 11, 2012 14:03
H3. Research link problems
These are:
http://docs.Oracle.com/HTML/A95194_01/title.htm
http://docs.Oracle.com/HTML/A95194_01/TOC.htm
With the help of A95194-01 for research.
Published by: mseberg on April 11, 2012 14:52
Found this (most recent)
http://docs.Oracle.com/CD/E10736_01/doc/server.341/e11080.PDF
Published by: mseberg on April 11, 2012 14:55
Not her, but can help
http://www.Oracle.com/technetwork/documentation/Oracle9i-arch-901-096298.html
OR
http://www.Oracle.com/pls/Tahiti/homepage
H3. Closer: (10 year, pdf)
http://docs.Oracle.com/PDF/A96684_01.PDF
http://www.Oracle.com/technetwork/CN/TestContent/failsafe-091972-ZHS.html
Published by: mseberg on April 11, 2012 15:00
Published by: mseberg on April 11, 2012 16:06
-
Startup Repair cannot repair this computer automatically
I have a laptop HP G7090EM and it does not start, after the Startup Repair, it gives me the following information
Automatic failover
6.0.6000.16386.6.0.6001.18000
Does anyone have ideas for fixing what causes not wiping all my photos on the hard drive?
Thank you very muchThanks, I managed to get back on! Just impossible to connect to the net now
-
Management for EqualLogic failover port
I'm setting up a Dell EqualLogic PS6210XV.
I configured dedicated management interface. When I disconnect the management on the active controller port, it is not automatically switch to the management port on the controller to start (as a port 10 GB of data). Please guide me how to do this fail over automatically.Hello
There is no automatic failover with dedicated Mgmt ports. You will need to either restore a connectivity or a failover on the other controller.
Kind regards
Don
-
Windows Vista startup repair cannot repair this computer automatically
The issue takes place at the start. The computer go directly into Startup Repair, which finally returns the message above. It allows me to report the problem or not and then proceeds to close. What can I do?
Problem event name: Startup Repair V2
Problem 1 of Signatures to 10 below:
Automatic failover
6.0.6000.16386.6.0.6000.16386
6
1048591
CorruptFile
CorruptFile
322122587
1
WrpRepair
0OS version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
You can try this:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their way of doing recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Satellite C660 - overheating and decommissioning
I have a computer laptop satellite C660 and in recent weeks it has been overheating and switching of. The fan and the heat sink is free of dirt and I bought and installed a new processor, but the problem persists. Actually the only way I can get the
-
Why Media player 11 does not see my CD burner?
I can't burn a CD with Media player 11. I can drag the pieces in the playlist, but upstairs where media player used to tell me how much space I had left it on the blank CD says "connect a burner and restart the player. The burner works because I ca
-
Z90D7 Bios locked ort I have a new Thin Client Z90D7 that took its Bios password locked out. We tried the default password: Fireport This does not work for us. Does anyone know what should be the Bios password? The unlock key is: C2BAC631 Thanks for
-
Hey all,.I'm buying a new PC for the company that I work. We use CS6 which is installed on a macbook pro, but you want to transfer it to the new PC when it arrives.I read a similar thread where the original poster has been advised that the only optio
-
Context in the tables information
Hi allI use ADF 12.1.2. y at - it a way to display several of context information for the different rows in a table ADF?If you look at the example of showcase "in a table" (contextInfo demo), when you click on a background information and then on ano